Skip to contentSkip to conversation

Build regression: unknown option "visible"

DISCUSSION Carlos R. Mafra 3 participants 6 messages Dec 20, 2010 – Dec 21, 2010

lore
Share & tools
lore
#0 lore raw

After pulling latest git from Linus (v2.6.37-rc6-132-g55ec86f) I can't compile it anymore:

[mafra@Pilar:linux-2.6]$ make -j2 O=/mnt/ext4/kernel-output/
  GEN     /mnt/ext4/kernel-output/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
drivers/i2c/algos/Kconfig:6: unknown option "visible"
drivers/media/common/tuners/Kconfig:48: unknown option "visible"
drivers/media/video/Kconfig:115: unknown option "visible"
drivers/media/dvb/frontends/Kconfig:16: unknown option "visible"
make[3]: *** [silentoldconfig] Fehler 1
make[2]: *** [silentoldconfig] Fehler 2

This was introduced by 37e3273ee52f ("media/video: convert Kconfig to use the menu's `visible' keyword"), but I did a quick search and apparently I am the only one with a broken build.

In any case, that's a regression for me and therefore I'm reporting it.

I can test patches etc and provide more info if needed.

#1 lore raw

Hi,

Quoted 13 lines · Carlos R. Mafra

After pulling latest git from Linus (v2.6.37-rc6-132-g55ec86f) I can't compile it anymore:

[mafra@Pilar:linux-2.6]$ make -j2 O=/mnt/ext4/kernel-output/
 GEN     /mnt/ext4/kernel-output/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
drivers/i2c/algos/Kconfig:6: unknown option "visible"
drivers/media/common/tuners/Kconfig:48: unknown option "visible"
drivers/media/video/Kconfig:115: unknown option "visible"
drivers/media/dvb/frontends/Kconfig:16: unknown option "visible"
make[3]: *** [silentoldconfig] Fehler 1
make[2]: *** [silentoldconfig] Fehler 2
Quoted 8 lines

This was introduced by 37e3273ee52f ("media/video: convert Kconfig to use the menu's `visible' keyword"), but I did a quick search and apparently I am the only one with a broken build.

In any case, that's a regression for me and therefore I'm reporting it.

I can test patches etc and provide more info if needed.

Did you build from a clean tree or a dirty one ?

I know these is issue with Kbuild where the parser will not get updated to the new version if the target already exist but is older than the current "shipped" one.

- Arnaud

#2 lore raw
Quoted 20 lines · Arnaud Lacombe

Hi,

Quoted 17 lines · Carlos R. Mafra

After pulling latest git from Linus (v2.6.37-rc6-132-g55ec86f) I can't compile it anymore:

[mafra@Pilar:linux-2.6]$ make -j2 O=/mnt/ext4/kernel-output/
 GEN     /mnt/ext4/kernel-output/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
drivers/i2c/algos/Kconfig:6: unknown option "visible"
drivers/media/common/tuners/Kconfig:48: unknown option "visible"
drivers/media/video/Kconfig:115: unknown option "visible"
drivers/media/dvb/frontends/Kconfig:16: unknown option "visible"
make[3]: *** [silentoldconfig] Fehler 1
make[2]: *** [silentoldconfig] Fehler 2

This was introduced by 37e3273ee52f ("media/video: convert Kconfig to use the menu's `visible' keyword"), but I did a quick search and apparently I am the only one with a broken build.

Quoted 5 lines
Quoted 4 lines

In any case, that's a regression for me and therefore I'm reporting it.

I can test patches etc and provide more info if needed.

Did you build from a clean tree or a dirty one ?

It was the same one which I always compile after pulling. So there is compiled stuff in the build dir /mnt/ext4/kernel-output (in an external hd).

Quoted 3 lines

I know these is issue with Kbuild where the parser will not get updated to the new version if the target already exist but is older than the current "shipped" one.

Hm, not sure what this means. Should I do a 'make clean' to get it back working?

#3 lore raw

Hi,

Quoted 31 lines · Carlos R. Mafra
Quoted 20 lines · Arnaud Lacombe

Hi,

Quoted 17 lines · Carlos R. Mafra

After pulling latest git from Linus (v2.6.37-rc6-132-g55ec86f) I can't compile it anymore:

[mafra@Pilar:linux-2.6]$ make -j2 O=/mnt/ext4/kernel-output/
 GEN     /mnt/ext4/kernel-output/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
drivers/i2c/algos/Kconfig:6: unknown option "visible"
drivers/media/common/tuners/Kconfig:48: unknown option "visible"
drivers/media/video/Kconfig:115: unknown option "visible"
drivers/media/dvb/frontends/Kconfig:16: unknown option "visible"
make[3]: *** [silentoldconfig] Fehler 1
make[2]: *** [silentoldconfig] Fehler 2

This was introduced by 37e3273ee52f ("media/video: convert Kconfig to use the menu's `visible' keyword"), but I did a quick search and apparently I am the only one with a broken build.

Quoted 5 lines
Quoted 4 lines

In any case, that's a regression for me and therefore I'm reporting it.

I can test patches etc and provide more info if needed.

Did you build from a clean tree or a dirty one ?

It was the same one which I always compile after pulling. So there is compiled stuff in the build dir /mnt/ext4/kernel-output (in an external hd).

Quoted 7 lines
Quoted 3 lines

I know these is issue with Kbuild where the parser will not get updated to the new version if the target already exist but is older than the current "shipped" one.

Hm, not sure what this means. Should I do a 'make clean' to get it back working?

yes.

- Arnaud

#4 lore raw
Quoted 7 lines · Arnaud Lacombe

Hi,

Quoted 2 lines · Carlos R. Mafra

Should I do a 'make clean' to get it back working?

yes.

Ah, it works now. Sorry about the noise.

#5 lore raw
In reply to Arnaud Lacombe
Quoted 22 lines · Arnaud Lacombe

Hi,

Quoted 19 lines · Carlos R. Mafra

After pulling latest git from Linus (v2.6.37-rc6-132-g55ec86f) I can't compile it anymore:

[mafra@Pilar:linux-2.6]$ make -j2 O=/mnt/ext4/kernel-output/
  GEN     /mnt/ext4/kernel-output/Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
drivers/i2c/algos/Kconfig:6: unknown option "visible"
drivers/media/common/tuners/Kconfig:48: unknown option "visible"
drivers/media/video/Kconfig:115: unknown option "visible"
drivers/media/dvb/frontends/Kconfig:16: unknown option "visible"
make[3]: *** [silentoldconfig] Fehler 1
make[2]: *** [silentoldconfig] Fehler 2

This was introduced by 37e3273ee52f ("media/video: convert Kconfig to use the menu's `visible' keyword"), but I did a quick search and apparently I am the only one with a broken build.

In any case, that's a regression for me and therefore I'm reporting it.

Quoted 7 lines
Quoted 2 lines

I can test patches etc and provide more info if needed.

Did you build from a clean tree or a dirty one ?

I know these is issue with Kbuild where the parser will not get updated to the new version if the target already exist but is older than the current "shipped" one.

Yes, if you build kconfig in the source tree and then do another build in a separate directory (make O=/some/where), the build system will not detect this and happily use generated kconfig files from the previous build attempt. I really should fix this given the pace of kconfig development lately :-).

Michal