mmc: implement hwreset_emmc and reinit_emmc callbacks

index ebb5748..8c82b9d 100644
@@ -12,6 +12,7 @@
 
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>

@@ -745,6 +746,84 @@ static int mmc_awake(struct mmc_host *host)
 	return err;
 }
 
+/**
+ * mmc_reinit_card - reinitialize eMMC card after HW reset
+ * @host: mmc host structure
+ *
+ * this callback is used to reinitialize card after a HW
+ * reset occurs.
+ * mmc_claim_host should be called before using this callback and
+ * mmc_release_host should be called after.
+ *
+ * Return value:
+ * 0 - successfully reinitialize
+ * other - failed to reinitialize
+ */
+static int mmc_reinit_card(struct mmc_host *host)
+{
+	int err;
+	/*
+	 * Before init card, set the clock to be
+	 * the init frequency
+	 */
+	host->ios.clock = host->f_init;
+	mmc_set_clock(host, host->ios.clock);
+
+	err = mmc_init_card(host, host->ocr, host->card);
+	if (err)
+		pr_err("%s: Error %d while reinit card\n",
+				mmc_hostname(host), err);
+
+	return err;
+}
+
+/**
+ * mmc_reset_card - reset eMMC card
+ *
+ * this callback is used to trigger RST_n signal by using GPIO to reset eMMC
+ * card. The RST_n signal is defined in eMMC4.4 spec
+ *
+ * Return value:
+ * 0 - successfully reset eMMC card
+ * -ENODEV - no valid GPIO line to be used
+ * -ENOSYS - GPIO functions is not implemented
+ * other - failed to reset eMMC card
+ */
+static int mmc_hwreset_emmc(struct mmc_host *host)
+{
+	int gpio = host->rst_gpio;
+	int ret;
+	if (gpio <= 0)
+		return -ENODEV;
+
+	/* request reset pin for eMMC */
+	ret = gpio_request(gpio, "eMMC_rst_pin");
+	if (ret < 0) {
+		pr_err("gpio %d request failed, err %d\n",
+				gpio, ret);
+		return ret;
+	}
+	/* set to be output and to be low state */
+	ret = gpio_direction_output(gpio, 0);
+	if (ret < 0) {
+		pr_err("gpio %d direction output failed, err %d\n",
+				gpio, ret);
+		gpio_free(gpio);
+		return ret;
+	}
+	/* delay 10us for tRSTW */
+	udelay(10);
+	/* set to be high and delay 300us */
+	gpio_set_value(gpio, 1);
+	udelay(300);
+	/* set to be output and to be low state */
+	gpio_direction_output(gpio, 0);
+	/* free reset gpio pin */
+	gpio_free(gpio);
+
+	return 0;
+}
+
 static const struct mmc_bus_ops mmc_ops = {
 	.awake = mmc_awake,
 	.sleep = mmc_sleep,

@@ -753,6 +832,8 @@ static const struct mmc_bus_ops mmc_ops = {
 	.suspend = NULL,
 	.resume = NULL,
 	.power_restore = mmc_power_restore,
+	.reinit_emmc = mmc_reinit_card,
+	.hwreset_emmc = mmc_hwreset_emmc,
 };
 
 static const struct mmc_bus_ops mmc_ops_unsafe = {

@@ -763,6 +844,8 @@ static const struct mmc_bus_ops mmc_ops_unsafe = {
 	.suspend = mmc_suspend,
 	.resume = mmc_resume,
 	.power_restore = mmc_power_restore,
+	.reinit_emmc = mmc_reinit_card,
+	.hwreset_emmc = mmc_hwreset_emmc,
 };
 
 static void mmc_attach_bus_ops(struct mmc_host *host)

index bcb793e..d2b3bf6 100644
@@ -243,6 +243,8 @@ struct mmc_host {
 
 	struct dentry		*debugfs_root;
 
+	unsigned int	rst_gpio;	/* gpio pin to reset eMMC card */
+
 	unsigned long		private[0] ____cacheline_aligned;
 };