Skip to contentSkip to conversation

mpt2sas: Add support for Customer specific branding messages

PATCH In review Kashyap, Desai 1 participant 1 message Jan 4, 2011 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 5/10 mpt2sas: Add support for Customer specific branding messages

Add support for Customer specific branding messages when device driver loads, based on specific customer subsystem vendor and device Ids

---

drivers/scsi/mpt2sas/mpt2sas_base.c +26 -0
index a11ac67..4f1f3f2 100644
@@ -1725,6 +1725,31 @@ _base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
+ * _base_display_intel_branding - Display branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_INTEL &&
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008) {
+
+		switch (ioc->pdev->subsystem_device) {
+		case MPT2SAS_INTEL_RMS2LL080_SSDID:
+			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+			    MPT2SAS_INTEL_RMS2LL080_BRANDING);
+			break;
+		case MPT2SAS_INTEL_RMS2LL040_SSDID:
+			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+			    MPT2SAS_INTEL_RMS2LL040_BRANDING);
+			break;
+		}
+	}
+}
+
+/**
  * _base_display_ioc_capabilities - Disply IOC's capabilities.
  * @ioc: per adapter object
  *
@@ -1754,6 +1779,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 	    ioc->bios_pg3.BiosVersion & 0x000000FF);
 
 	_base_display_dell_branding(ioc);
+	_base_display_intel_branding(ioc);
 
 	printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
 
drivers/scsi/mpt2sas/mpt2sas_base.h +14 -0
index 283568c..82579fb 100644
@@ -154,6 +154,20 @@
 #define MPT2SAS_DELL_6GBPS_SAS_SSDID               0x1F22
 
 /*
+ * Intel HBA branding
+ */
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
+				"Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
+				"Intel Integrated RAID Module RMS2LL040"
+
+/*
+ * Intel HBA SSDIDs
+ */
+#define MPT2SAS_INTEL_RMS2LL080_SSDID          0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID          0x350F
+
+/*
  * per target private data
  */
 #define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01