Skip to contentSkip to conversation

Load kernel from UbiFS or YAFFS2

U-Boot Thorsten Mühlfelder 2 participants 2 messages Feb 17, 2011

lore
Share & tools
lore
#0 lore raw

Hi,

does U-Boot already support loading the kernel of a UbiFS or YAFFS2 partition? I've built U-Boot 2010.09 for an Atmel at91sam9260ek_nandflash board and I've seen that there are some ubi sources included but the U-Boot binary does not offer any ubi related commands, such as ubifsload. Similiar question for YAFFS2.

Greetings
Thorsten

#1 lore raw
Quoted 7 lines · Thorsten M?hlfelder

Hi,

does U-Boot already support loading the kernel of a UbiFS or YAFFS2 partition? I've built U-Boot 2010.09 for an Atmel at91sam9260ek_nandflash board and I've seen that there are some ubi sources included but the U-Boot binary does not offer any ubi related commands, such as ubifsload. Similiar question for YAFFS2.

This means you have not yet activated

#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS

in your configuration file (and CONFIG_YAFFS2 as well for yaffs).

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================