Skip to contentSkip to conversation

cx231xx Hauppauge WinTV 950HD

PATCH NAK Stephan Mueller 2 participants 2 messages Apr 4, 2011 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cx231xx Hauppauge WinTV 950HD

Hi,

please apply the attached patch to make the 950HD USB card working.

Ciao
Stephan

---

Hauppauge WinTV 950HD

media/video/cx231xx/cx231xx-cards.c 2011-04-04 15:48:37.257376578 +0200 renamed from media/video/cx231xx/cx231xx-cards.c.orig 2011-04-04 18:17:55.245769669 +0200 +2 -0
@@ -458,6 +458,8 @@
         .driver_info = CX231XX_BOARD_CNXT_RDU_250},
        {USB_DEVICE(0x2040, 0xb120),
         .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
+       {USB_DEVICE(0x2040, 0xb138),
+        .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
        {USB_DEVICE(0x2040, 0xb140),
         .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
        {USB_DEVICE(0x2040, 0xc200),
#1 lore raw
Quoted 25 lines · Stephan Mueller

Hi,

please apply the attached patch to make the 950HD USB card working.

Ciao
Stephan

---

Hauppauge WinTV 950HD

media/video/cx231xx/cx231xx-cards.c 2011-04-04 15:48:37.257376578 +0200 renamed from media/video/cx231xx/cx231xx-cards.c.orig    2011-04-04 18:17:55.245769669 +0200 +2 -1
@@ -458,6 +458,8 @@
         .driver_info = CX231XX_BOARD_CNXT_RDU_250},
        {USB_DEVICE(0x2040, 0xb120),
         .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
+       {USB_DEVICE(0x2040, 0xb138),
+        .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
        {USB_DEVICE(0x2040, 0xb140),
         .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
        {USB_DEVICE(0x2040, 0xc200),
--
Quoted 3 lines

To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

NACK

The 2040:b138 is the new variant of the HVR-900, which is a DVB-T device that uses a different demodulator (for which there is no driver currently). It needs its own board profile defined, since the HAUPPAUGE_EXETER board profile is configured for the lgdt3305 demod.

You can submit a patch which defines a new board profile, sets the product name properly, and only supports analog mode (since there is no demod driver to reference).

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com