irq/core changes for v2.6.40

index fb10fd0..b342234 100644
@@ -191,8 +191,8 @@
 	<para>
 	Whenever an interrupt triggers, the lowlevel arch code calls into
 	the generic interrupt code by calling desc->handle_irq().
-	This highlevel IRQ handling function only uses desc->chip primitives
-	referenced by the assigned chip descriptor structure.
+	This highlevel IRQ handling function only uses desc->irq_data.chip
+	primitives referenced by the assigned chip descriptor structure.
 	</para>
     </sect1>
     <sect1 id="Highlevel_Driver_API">

@@ -206,11 +206,11 @@
 	  <listitem><para>enable_irq()</para></listitem>
 	  <listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
 	  <listitem><para>synchronize_irq() (SMP only)</para></listitem>
-	  <listitem><para>set_irq_type()</para></listitem>
-	  <listitem><para>set_irq_wake()</para></listitem>
-	  <listitem><para>set_irq_data()</para></listitem>
-	  <listitem><para>set_irq_chip()</para></listitem>
-	  <listitem><para>set_irq_chip_data()</para></listitem>
+	  <listitem><para>irq_set_irq_type()</para></listitem>
+	  <listitem><para>irq_set_irq_wake()</para></listitem>
+	  <listitem><para>irq_set_handler_data()</para></listitem>
+	  <listitem><para>irq_set_chip()</para></listitem>
+	  <listitem><para>irq_set_chip_data()</para></listitem>
           </itemizedlist>
 	  See the autogenerated function documentation for details.
 	</para>

@@ -225,6 +225,8 @@
 	  <listitem><para>handle_fasteoi_irq</para></listitem>
 	  <listitem><para>handle_simple_irq</para></listitem>
 	  <listitem><para>handle_percpu_irq</para></listitem>
+	  <listitem><para>handle_edge_eoi_irq</para></listitem>
+	  <listitem><para>handle_bad_irq</para></listitem>
 	  </itemizedlist>
 	  The interrupt flow handlers (either predefined or architecture
 	  specific) are assigned to specific interrupts by the architecture

@@ -241,13 +243,13 @@
 		<programlisting>
 default_enable(struct irq_data *data)
 {
-	desc->chip->irq_unmask(data);
+	desc->irq_data.chip->irq_unmask(data);
 }
 
 default_disable(struct irq_data *data)
 {
 	if (!delay_disable(data))
-		desc->chip->irq_mask(data);
+		desc->irq_data.chip->irq_mask(data);
 }
 
 default_ack(struct irq_data *data)

@@ -284,9 +286,9 @@ noop(struct irq_data *data))
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->irq_mask();
-handle_IRQ_event(desc->action);
-desc->chip->irq_unmask();
+desc->irq_data.chip->irq_mask_ack();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_unmask();
 		</programlisting>
 		</para>
 	    </sect3>

@@ -300,8 +302,8 @@ desc->chip->irq_unmask();
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-desc->chip->irq_eoi();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
 	    </sect3>

@@ -315,17 +317,17 @@ desc->chip->irq_eoi();
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
 if (desc->status &amp; running) {
-	desc->chip->irq_mask();
+	desc->irq_data.chip->irq_mask_ack();
 	desc->status |= pending | masked;
 	return;
 }
-desc->chip->irq_ack();
+desc->irq_data.chip->irq_ack();
 desc->status |= running;
 do {
 	if (desc->status &amp; masked)
-		desc->chip->irq_unmask();
+		desc->irq_data.chip->irq_unmask();
 	desc->status &amp;= ~pending;
-	handle_IRQ_event(desc->action);
+	handle_irq_event(desc->action);
 } while (status &amp; pending);
 desc->status &amp;= ~running;
 		</programlisting>

@@ -344,7 +346,7 @@ desc->status &= ~running;
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
+handle_irq_event(desc->action);
 		</programlisting>
 		</para>
    	    </sect3>

@@ -362,12 +364,29 @@ handle_IRQ_event(desc->action);
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-if (desc->chip->irq_eoi)
-        desc->chip->irq_eoi();
+if (desc->irq_data.chip->irq_ack)
+	desc->irq_data.chip->irq_ack();
+handle_irq_event(desc->action);
+if (desc->irq_data.chip->irq_eoi)
+        desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
    	    </sect3>
+	    <sect3 id="EOI_Edge_IRQ_flow_handler">
+	 	<title>EOI Edge IRQ flow handler</title>
+		<para>
+		handle_edge_eoi_irq provides an abnomination of the edge
+		handler which is solely used to tame a badly wreckaged
+		irq controller on powerpc/cell.
+		</para>
+   	    </sect3>
+	    <sect3 id="BAD_IRQ_flow_handler">
+	 	<title>Bad IRQ flow handler</title>
+		<para>
+		handle_bad_irq is used for spurious interrupts which
+		have no real handler assigned..
+		</para>
+   	    </sect3>
 	</sect2>
 	<sect2 id="Quirks_and_optimizations">
 	<title>Quirks and optimizations</title>

@@ -410,6 +429,7 @@ if (desc->chip->irq_eoi)
 	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
 	  <listitem><para>irq_mask()</para></listitem>
 	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
 	  <listitem><para>irq_retrigger() - Optional</para></listitem>
 	  <listitem><para>irq_set_type() - Optional</para></listitem>
 	  <listitem><para>irq_set_wake() - Optional</para></listitem>

@@ -424,32 +444,24 @@ if (desc->chip->irq_eoi)
   <chapter id="doirq">
      <title>__do_IRQ entry point</title>
      <para>
- 	The original implementation __do_IRQ() is an alternative entry
-	point for all types of interrupts.
+	The original implementation __do_IRQ() was an alternative entry
+	point for all types of interrupts. It not longer exists.
      </para>
      <para>
 	This handler turned out to be not suitable for all
 	interrupt hardware and was therefore reimplemented with split
-	functionality for egde/level/simple/percpu interrupts. This is not
+	functionality for edge/level/simple/percpu interrupts. This is not
 	only a functional optimization. It also shortens code paths for
 	interrupts.
       </para>
-      <para>
-	To make use of the split implementation, replace the call to
-	__do_IRQ by a call to desc->handle_irq() and associate
-        the appropriate handler function to desc->handle_irq().
-	In most cases the generic handler implementations should
-	be sufficient.
-     </para>
   </chapter>
 
   <chapter id="locking">
      <title>Locking on SMP</title>
      <para>
 	The locking of chip registers is up to the architecture that
-	defines the chip primitives. There is a chip->lock field that can be used
-	for serialization, but the generic layer does not touch it. The per-irq
-	structure is protected via desc->lock, by the generic layer.
+	defines the chip primitives. The per-irq structure is
+	protected via desc->lock, by the generic layer.
      </para>
   </chapter>
   <chapter id="structs">

index c574f9a..d1d051b3 100644
@@ -48,6 +48,10 @@ config IRQ_PREFLOW_FASTEOI
 config IRQ_EDGE_EOI_HANDLER
        bool
 
+# Generic configurable interrupt chip implementation
+config GENERIC_IRQ_CHIP
+       bool
+
 # Support forced irq threading
 config IRQ_FORCED_THREADING
        bool

index 54329cd..7329005 100644
@@ -1,5 +1,6 @@
 
 obj-y := irqdesc.o handle.o manage.o spurious.o resend.o chip.o dummychip.o devres.o
+obj-$(CONFIG_GENERIC_IRQ_CHIP) += generic-chip.o
 obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o