Skip to contentSkip to conversation

OMAP: VP: Explicitly mask VPVOLTAGE field

PATCH Applied Todd Poynor 2 participants 2 messages May 28, 2011 – Jun 2, 2011

Subsystems (3)
Arm (32-bit) Arm sub-architectures OMAP2+ support
lore
Share & tools
lore

Todd Poynor

author
#0 lore raw

PATCH 1/1 OMAP: VP: Explicitly mask VPVOLTAGE field

Reading the VPVOLTAGE field of PRM_VP_*_VOLTAGE registers currently relies on a u32 -> u8 conversion to mask off the FORCEUPDATEWAIT field in the upper bits. Make this explicit using the mask symbol already defined, added as a new field in struct omap_vp_common.

Signed-off-by Todd Poynor <[email protected]>

---

V2 based on Kevin's feedback (thanks!):

* Drop the shift field, use __ffs().
* Updated subject prefix.

 arch/arm/mach-omap2/vp.c          |    3 ++-
 arch/arm/mach-omap2/vp.h          |    2 ++
 arch/arm/mach-omap2/vp3xxx_data.c |    2 ++
 arch/arm/mach-omap2/vp44xx_data.c |    1 +
 4 files changed, 7 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/vp.c +2 -1
index e7d38f6..3807620 100644
@@ -227,7 +227,8 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
 		return 0;
 	}
 
-	curr_vsel = voltdm->read(vp->voltage);
+	curr_vsel = (voltdm->read(vp->voltage) & vp->common->vpvoltage_mask)
+		>> __ffs(vp->common->vpvoltage_mask);
 
 	if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) {
 		pr_warning("%s: PMIC function to convert vsel to voltage"
arch/arm/mach-omap2/vp.h +2 -0
index 0d63267..f78752b 100644
@@ -63,6 +63,7 @@ struct omap_vp_ops {
  * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
  * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
  * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
  */
 struct omap_vp_common {
 	u32 vpconfig_erroroffset_mask;

@@ -79,6 +80,7 @@ struct omap_vp_common {
 	u8 vlimitto_vddmin_shift;
 	u8 vlimitto_vddmax_shift;
 	u8 vlimitto_timeout_shift;
+	u8 vpvoltage_mask;
 
 	const struct omap_vp_ops *ops;
 };
arch/arm/mach-omap2/vp3xxx_data.c +2 -0
index d429c44..260c554 100644
@@ -51,6 +51,8 @@ static const struct omap_vp_common omap3_vp_common = {
 	.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
 	.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
 	.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+	.vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+
 	.ops = &omap3_vp_ops,
 };
arch/arm/mach-omap2/vp44xx_data.c +1 -0
index 0daf2a4..b4e7704 100644
@@ -51,6 +51,7 @@ static const struct omap_vp_common omap4_vp_common = {
 	.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
 	.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
 	.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+	.vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
 	.ops = &omap4_vp_ops,
 };
Signature · 1 line
1.7.3.1
Applied
#1 lore raw
Quoted 6 lines · Todd Poynor

Reading the VPVOLTAGE field of PRM_VP_*_VOLTAGE registers currently relies on a u32 -> u8 conversion to mask off the FORCEUPDATEWAIT field in the upper bits. Make this explicit using the mask symbol already defined, added as a new field in struct omap_vp_common.

Signed-off-by Todd Poynor <[email protected]>

Thanks, applied.

Kevin