Staging: comedi: add dyna_pci10xx0 driver to Makefile

PATCH In review Prashant P. Shah 1 participant 2 messages Jun 9, 2011 Staging

lore

Share & tools

lore

Prashant P. Shah

author

2011-06-09 09:02 UTC #0 lore raw

PATCH 2/2 Staging: comedi: add dyna_pci10xx0 driver to Makefile

Add dyna_pci10xx0 entry to comedi Kconfig and Makefile

Signed-off-by Prashant P. Shah <[email protected]>

---
 drivers/staging/comedi/Kconfig          |   10 ++++++++++
 drivers/staging/comedi/drivers/Makefile |    1 +
 2 files changed, 11 insertions(+), 0 deletions(-)

drivers/staging/comedi/Kconfig +10 -0

index 1502d80..df1ac0a 100644
@@ -820,6 +820,16 @@ config COMEDI_DT3000
 	  To compile this driver as a module, choose M here: the module will be
 	  called dt3000.
 
+config COMEDI_DYNA_PCI10XX
+	tristate "Dynalog PCI DAQ series support"
+	default N
+	---help---
+	  Enable support for Dynalog PCI DAQ series
+	  PCI-1050
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called dyna_pci10xx.
+
 config COMEDI_UNIOXX5
 	tristate "Fastwel UNIOxx-5 analog and digital io board support"
 	default N

drivers/staging/comedi/drivers/Makefile +1 -0

index 354fb7d..33bf1f5 100644
@@ -86,6 +86,7 @@ obj-$(CONFIG_COMEDI_AMPLC_PCI224)	+= amplc_pci224.o
 obj-$(CONFIG_COMEDI_AMPLC_PCI230)	+= amplc_pci230.o
 obj-$(CONFIG_COMEDI_CONTEC_PCI_DIO)	+= contec_pci_dio.o
 obj-$(CONFIG_COMEDI_DT3000)		+= dt3000.o
+obj-$(CONFIG_COMEDI_DYNA_PCI10XX)	+= dyna_pci10xx.o
 obj-$(CONFIG_COMEDI_UNIOXX5)		+= unioxx5.o
 obj-$(CONFIG_COMEDI_GSC_HPDI)		+= gsc_hpdi.o
 obj-$(CONFIG_COMEDI_ICP_MULTI)		+= icp_multi.o

Signature · 1 line

1.7.1

Prashant Shah

author

2011-06-09 09:13 UTC #1 lore raw

Hi,

Quoted 1 line · Prashant P. Shah

Add dyna_pci10xx0 entry to comedi Kconfig and Makefile

Please use the patches that I have resend. I made a spelling mistake in the commit message (extra 0 in the dyna_pci10xx0 name)

Thanks.