mpt2sas: Set max_sector count from module para
PATCH 3/7 mpt2sas: Set max_sector count from module para
This feature is to override the defaultmax_sectors setting at load time, taking max_sectors as an command line option when loading the driver. The setting is currently hard-coded in the driver to 8192 sectors (4MB transfers). If max_sectors is specified at load time, minimum specified setting will be 64, and the maximum is 8192. The driver will modify the setting to be on even boundary. If max_sectors is not specified, the driver will default to 8192.
Signed-off-by Kashyap Desai <[email protected]>
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c +23 -0
@@ -94,6 +94,10 @@ static u32 logging_level;MODULE_PARM_DESC (logging_level," bits for enabling additional logging info " "(default=0)" ); +static ushort max_sectors =0xFFFF ; +module_param (max_sectors, ushort,0 ); +MODULE_PARM_DESC (max_sectors,"max sectors, range 64 to 8192 default=8192" ); +/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ #define MPT2SAS_MAX_LUN (16895)static int max_lun =MPT2SAS_MAX_LUN ;
@@ -7400,6 +7404,25 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) shost->transportt = mpt2sas_transport_template; shost->unique_id = ioc->id; +if (max_sectors !=0xFFFF ) { +if (max_sectors <64 ) { + shost->max_sectors =64 ; +printk (MPT2SAS_WARN_FMT "Invalid value %d passed " +"for max_sectors, range is 64 to 8192. Assigning " +"value of 64.\n" , ioc->name, max_sectors); + }else if (max_sectors >8192 ) { + shost->max_sectors =8192 ; +printk (MPT2SAS_WARN_FMT "Invalid value %d passed " +"for max_sectors, range is 64 to 8192. Assigning " +"default value of 8192.\n" , ioc->name, + max_sectors); + }else { + shost->max_sectors = max_sectors &0xFFFE ; +printk (MPT2SAS_INFO_FMT "The max_sectors value is " +"set to %d\n" , ioc->name, shost->max_sectors); + } + } +if ((scsi_add_host (shost, &pdev->dev))) {printk (MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n" , ioc->name, __FILE__, __LINE__, __func__);