Skip to contentSkip to conversation

TTY/serial driver patches for 3.1

PATCH In review Greg KH 2 participants 4 messages Jul 26, 2011 – Aug 15, 2011 TTY layer and serial drivers

lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 TTY/serial driver patches for 3.1

Here is the big tty/serial patchset for your 3.1 tree.

Nothing major at all, lots of line discipline tweaks for the newer ones that were added last release, and some small tty core fixes as well.

Full details are below as to what it contains.

Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/ tty-next

All of these patches have been in the -mm and -next trees for a while.

Patches will be sent to the linux-serial mailing list, if anyone wants to see them.

thanks,

greg k-h

------------

 drivers/misc/Makefile            |    2 +-
 drivers/misc/pch_phub.c          |    4 +-
 drivers/misc/pti.c               |   99 ++++++----
 drivers/parport/parport_pc.c     |   54 -----
 drivers/parport/parport_serial.c |  229 ++++++++++++++++++++--
 drivers/tty/moxa.c               |    5 +-
 drivers/tty/mxser.c              |    4 +-
 drivers/tty/n_gsm.c              |  401 +++++++++++++++++++++++++++++++++++---
 drivers/tty/n_tty.c              |    2 +-
 drivers/tty/serial/8250.c        |    4 +-
 drivers/tty/serial/8250_pci.c    |  183 +++++++++++++++++-
 drivers/tty/serial/Kconfig       |    2 +-
 drivers/tty/serial/pch_uart.c    |   11 +-
 drivers/tty/serial/s5pv210.c     |    4 +
 drivers/tty/serial/samsung.c     |   27 ++--
 drivers/tty/tty_io.c             |    4 +-
 include/linux/gsmmux.h           |   11 +
 include/linux/pci_ids.h          |    4 +
 include/linux/pti.h              |    3 +-
 include/linux/tty.h              |   37 ++--
 20 files changed, 903 insertions(+), 187 deletions(-)

---------------

Alexander Stein (2):
pch_uart: Add MSI support
pch_uart: add missing comment about OKI ML7223

Andrew McGregor (1):
tty: fix "IRQ45: nobody cared"

Du, Alek (1):
n_gsm: fix the wrong FCS handling

Florian Fainelli (1):
TTY: export NR_LDISC and N_* line discipline numbers to user-space

Frédéric Brière (2):
serial: 8250_pci: add .probe member to struct pci_serial_quirk parport/serial: add support for Timedia/SUNIX cards to parport_serial

J Freyensee (2):
0 for o PTI Makefile bug.
PTI feature to allow user to name and mark masterchannel request.

Jiri Slaby (1):
serial: 8250, increase PASS_LIMIT

Jongpill Lee (1):
tty: s5pv210: Add delay loop on fifo reset function for UART

Manuel Zerpies (1):
drivers/tty: use printk_ratelimited() instead of printk_ratelimit()

Michael Reed (1):
8250_pci Add EEH support to the 8250 driver for IBM/Digi PCIe 2-port Adapter

Mika Westerberg (1):
serial: mrst_max3110: initialize waitqueue earlier

Mike Frysinger (1):
serial: bfin_5xx: fix off-by-one with resource size

MyungJoo Ham (1):
tty: serial: samsung.c remove legacy PM code.

Nicos Gollan (1):
Basic support for Moschip 9900 family I/O chips

Ralf Baechle (1):
SERIAL: SC26xx: Fix link error.

Russ Gorby (3):
tty: n_gsm: expose gsmtty device nodes at ldisc open time
tty: n_gsm: Add raw-ip support
tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs

Shreshtha Kumar Sahu (1):
amba pl011: workaround for uart registers lockup

Stephen Warren (1):
tty/serial: Fix XSCALE serial ports, e.g. ce4100

Tomoya MORINAGA (1):
pch_phub: Fix register miss-setting issue

Uwe Kleine-König (1):
serial/pch: use global div helper instead of creating a private one

William Douglas (1):
mrst_max3110: Change max missing message priority.

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw
Quoted 4 lines · Greg KH

Here is the big tty/serial patchset for your 3.1 tree.

Nothing major at all, lots of line discipline tweaks for the newer ones that were added last release, and some small tty core fixes as well.

Greg,

I hate to be a pest, but you didn't include my patch, "[v3] tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver". The other six patches of that patchset are already in Linus' tree, so I'd really like to get this one into 3.1 as well. You even tried to apply v2 to tty-next about three weeks ago, but it didn't apply so I immediately posted v3.

Signature · 2 lines
Timur Tabi
Linux kernel developer at Freescale
author
#2 lore raw
Quoted 6 lines · On Tue, Jul 26, 2011 at 03:05:17PM +0000, Tabi Timur-B04825 wrote:
Quoted 4 lines · Greg KH

Here is the big tty/serial patchset for your 3.1 tree.

Nothing major at all, lots of line discipline tweaks for the newer ones that were added last release, and some small tty core fixes as well.

Quoted 8 lines

Greg,

I hate to be a pest, but you didn't include my patch, "[v3] tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver". The other six patches of that patchset are already in Linus' tree, so I'd really like to get this one into 3.1 as well. You even tried to apply v2 to tty-next about three weeks ago, but it didn't apply so I immediately posted v3.

It is in my queue to review after -rc1 is out.

thanks,

greg k-h

#3 lore raw
Quoted 8 lines · Greg KH
Quoted 6 lines
Quoted 6 lines

I hate to be a pest, but you didn't include my patch, "[v3] tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver". The other six patches of that patchset are already in Linus' tree, so I'd really like to get this one into 3.1 as well. You even tried to apply v2 to tty-next about three weeks ago, but it didn't apply so I immediately posted v3.

It is in my queue to review after -rc1 is out.

3.1-rc2 was just released, and I still don't see my driver. For -rc3, Linus said he wants to see only "real fixes"
(http://lkml.org/lkml/2011/8/14/281).