Skip to contentSkip to conversation

gpio-ep93xx: Add helper function to convert irq to gpio, port, and mask.

PATCH H Hartley Sweeten 2 participants 3 messages Aug 9, 2011 GPIO

lore
Share & tools
lore
#0 lore raw

This consolidates the irq_to_gpio() call and the shift magic used to convert a GPIO irq into it's relevant GPIO, port, and mask values.

---

drivers/gpio/gpio-ep93xx.c +34 -18
index 468b27d..788c7c4 100644
@@ -46,6 +46,20 @@ static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
 static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
 
+/*
+ * Map a sw irq to it's GPIO port and mask.
+ */
+static int ep93xx_gpio_irq_to_gpio_port_mask(unsigned int irq,
+			int *port, int *port_mask)
+{
+	int gpio = irq_to_gpio(irq);
+
+	*port = gpio >> 3;
+	*port_mask = 1 << (gpio & 7);
+
+	return gpio;
+}
+
 static void ep93xx_gpio_update_int_params(unsigned port)
 {
 	BUG_ON(port > 2);
@@ -69,9 +83,9 @@ static inline void ep93xx_gpio_int_mask(unsigned line)
 
 static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
 {
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(irq, &port, &port_mask);
 
 	if (enable)
 		gpio_int_debounce[port] |= port_mask;
@@ -119,9 +133,9 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 static void ep93xx_gpio_irq_ack(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
 	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
@@ -133,9 +147,9 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d)
 
 static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
 	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
@@ -148,19 +162,21 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
 
 static void ep93xx_gpio_irq_mask(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
-	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	gpio_int_unmasked[port] &= ~port_mask;
 	ep93xx_gpio_update_int_params(port);
 }
 
 static void ep93xx_gpio_irq_unmask(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
-	gpio_int_unmasked[port] |= 1 << (line & 7);
+	gpio_int_unmasked[port] |= port_mask;
 	ep93xx_gpio_update_int_params(port);
 }
 
@@ -171,11 +187,11 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d)
  */
 static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
 {
-	const int gpio = irq_to_gpio(d->irq);
-	const int port = gpio >> 3;
-	const int port_mask = 1 << (gpio & 7);
+	int gpio, port, port_mask;
 	irq_flow_handler_t handler;
 
+	gpio = ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
+
 	gpio_direction_input(gpio);
 
 	switch (type) {
#1 lore raw
Quoted 5 lines · H Hartley Sweeten

This consolidates the irq_to_gpio() call and the shift magic used to convert a GPIO irq into it's relevant GPIO, port, and mask values.

I think this should have my:

Since I wrote the original patch.

Thanks,
~Ryan

Quoted 116 lines
Cc Grant Likely <[email protected]>

---

drivers/gpio/gpio-ep93xx.c +34 -19
index 468b27d..788c7c4 100644
@@ -46,6 +46,20 @@ static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
 static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
 
+/*
+ * Map a sw irq to it's GPIO port and mask.
+ */
+static int ep93xx_gpio_irq_to_gpio_port_mask(unsigned int irq,
+			int *port, int *port_mask)
+{
+	int gpio = irq_to_gpio(irq);
+
+	*port = gpio >> 3;
+	*port_mask = 1 << (gpio & 7);
+
+	return gpio;
+}
+
 static void ep93xx_gpio_update_int_params(unsigned port)
 {
 	BUG_ON(port > 2);
@@ -69,9 +83,9 @@ static inline void ep93xx_gpio_int_mask(unsigned line)
 
 static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
 {
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(irq, &port, &port_mask);
 
 	if (enable)
 		gpio_int_debounce[port] |= port_mask;
@@ -119,9 +133,9 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 static void ep93xx_gpio_irq_ack(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
 	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
@@ -133,9 +147,9 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d)
 
 static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
 	if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
@@ -148,19 +162,21 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
 
 static void ep93xx_gpio_irq_mask(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
-	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	gpio_int_unmasked[port] &= ~port_mask;
 	ep93xx_gpio_update_int_params(port);
 }
 
 static void ep93xx_gpio_irq_unmask(struct irq_data *d)
 {
-	int line = irq_to_gpio(d->irq);
-	int port = line >> 3;
+	int port, port_mask;
+
+	ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
 
-	gpio_int_unmasked[port] |= 1 << (line & 7);
+	gpio_int_unmasked[port] |= port_mask;
 	ep93xx_gpio_update_int_params(port);
 }
 
@@ -171,11 +187,11 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d)
  */
 static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
 {
-	const int gpio = irq_to_gpio(d->irq);
-	const int port = gpio >> 3;
-	const int port_mask = 1 << (gpio & 7);
+	int gpio, port, port_mask;
 	irq_flow_handler_t handler;
 
+	gpio = ep93xx_gpio_irq_to_gpio_port_mask(d->irq, &port, &port_mask);
+
 	gpio_direction_input(gpio);
 
 	switch (type) {
--

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 4 lines · Ryan Mallon
Quoted 3 lines · H Hartley Sweeten

This consolidates the irq_to_gpio() call and the shift magic used to convert a GPIO irq into it's relevant GPIO, port, and mask values.

Quoted 8 lines
Quoted 2 lines

I think this should have my:

Since I wrote the original patch.

Sorry, misunderstood your previous email.

I re-coded this patch based on my one helper function instead of your two functions. Regardless, the idea was yours and I have no problem with it having your Signed-off-by.

I'll re-post it with the modified sign offs shortly.

Thanks,
Hartley ���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m���� ������?�I�