Skip to contentSkip to conversation

omap cleanup part2 for v3.2 merge window

GIT PULL Tony Lindgren 2 participants 5 messages Sep 23, 2011 – Sep 30, 2011

lore
Share & tools
lore
#0 lore raw

Hi Arnd,

Please pull omap cleanup branch again from:

git://github.com/tmlind/linux.git cleanup

This contains a fix for earlier cleanup patches and has omap_device cleanup and PM cleanup merged in.

As some of the later cleanup was based on a -rc6 while the earlier branch was based on -rc4, the git request pull against the earlier cleanup produces noise.

So instead, below is a diff to the previous pull request against -rc7 that show the incremental changes.

Regards,

Tony

tmp/new renamed from tmp/old +49 -3
@@ -4,7 +4,30 @@
 
 are available in the git repository at:
 
-  git://github.com/tmlind/linux.git cleanup-part1
+  git://github.com/tmlind/linux.git cleanup
+
+Grazvydas Ignotas (1):
+      OMAP: omap_device: make latency autoadjust messages debug
+
+Jarkko Nikula (1):
+      omap: mcbsp: Remove omap device API
+
+Johan Hovold (2):
+      OMAP2+: PM: fix typos in misc. comment and error messages
+      OMAP2+: PM: clean up error messages: replace printk with pr_err.
+
+Kevin Hilman (8):
+      OMAP: omap_device: replace debug/warning/error prints with dev_* macros
+      OMAP: omap_device: remove internal functions from omap_device.h
+      OMAP: omap_device: when building return platform_device instead of omap_device
+      OMAP: omap_device: device register functions now take platform_device pointer
+      OMAP: omap_device: _disable_idle_on_suspend() takes platform_device pointer
+      OMAP: omap_device: decouple platform_device from omap_device
+      OMAP3: PM: fix UART handling when using no_console_suspend
+      ARM: 7082/1: platform_device: pdev_archdata: add omap_device pointer
+
+Michael Jones (1):
+      OMAP2: PM debug: remove leftover debug code
 
 Paul Walmsley (12):
       OMAP3: id: remove identification codes that only correspond to marketing names
@@ -20,12 +43,16 @@
       OMAP2+: hwmod: remove OMAP_CHIP*
       OMAP: id: remove OMAP_CHIP declarations, code
 
-Tony Lindgren (4):
+Tony Lindgren (7):
       omap2+: Use Kconfig symbol in Makefile instead of obj-y
       ARM: OMAP: Move omap2_init_common_devices out of init_early
       ARM: OMAP: Introduce SoC specific early_init
       Merge branch 'omap_chip_remove_cleanup_3.2' of git://git.pwsan.com/linux-2.6 into cleanup
+      ARM: OMAP2+: Fix missing inline functions for Makefile cleanup
+      Merge branch 'for_3.2/omap_device' of git://gitorious.org/khilman/linux-omap-pm into cleanup
+      Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup
 
+ arch/arm/include/asm/device.h                    |    5 +
  arch/arm/mach-omap2/Makefile                     |   81 +--
  arch/arm/mach-omap2/board-2430sdp.c              |    9 +-
  arch/arm/mach-omap2/board-3430sdp.c              |    9 +-
@@ -37,6 +64,8 @@
  arch/arm/mach-omap2/board-cm-t35.c               |   13 +-
  arch/arm/mach-omap2/board-cm-t3517.c             |    9 +-
  arch/arm/mach-omap2/board-devkit8000.c           |   12 +-
+ arch/arm/mach-omap2/board-flash.c                |    5 -
+ arch/arm/mach-omap2/board-flash.h                |   19 +
  arch/arm/mach-omap2/board-generic.c              |    2 +-
  arch/arm/mach-omap2/board-h4.c                   |    9 +-
  arch/arm/mach-omap2/board-igep0020.c             |   13 +-
@@ -64,13 +93,24 @@
  arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c |  803 +---------------------
  arch/arm/mach-omap2/clockdomains3xxx_data.c      |  398 +++++++++++
  arch/arm/mach-omap2/clockdomains44xx_data.c      |  409 +++---------
+ arch/arm/mach-omap2/devices.c                    |   44 +-
+ arch/arm/mach-omap2/display.c                    |    6 +-
+ arch/arm/mach-omap2/dma.c                        |   16 +-
+ arch/arm/mach-omap2/gpio.c                       |   10 +-
+ arch/arm/mach-omap2/hsmmc.c                      |    8 +-
+ arch/arm/mach-omap2/hwspinlock.c                 |    8 +-
  arch/arm/mach-omap2/id.c                         |  191 ++----
  arch/arm/mach-omap2/io.c                         |   52 ++-
+ arch/arm/mach-omap2/mcbsp.c                      |    8 +-
  arch/arm/mach-omap2/omap_hwmod.c                 |    3 -
  arch/arm/mach-omap2/omap_hwmod_2420_data.c       |   37 -
  arch/arm/mach-omap2/omap_hwmod_2430_data.c       |   45 --
  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c       |  169 +++---
  arch/arm/mach-omap2/omap_hwmod_44xx_data.c       |   82 ---
+ arch/arm/mach-omap2/opp.c                        |    2 +-
+ arch/arm/mach-omap2/pm.c                         |   30 +-
+ arch/arm/mach-omap2/pm24xx.c                     |   27 -
+ arch/arm/mach-omap2/pm34xx.c                     |    2 +-
  arch/arm/mach-omap2/powerdomain-common.c         |    7 +-
  arch/arm/mach-omap2/powerdomain.c                |   87 ++-
  arch/arm/mach-omap2/powerdomain.h                |    9 +-
@@ -78,12 +118,18 @@
  arch/arm/mach-omap2/powerdomains2xxx_data.c      |   44 +-
  arch/arm/mach-omap2/powerdomains3xxx_data.c      |   81 ++-
  arch/arm/mach-omap2/powerdomains44xx_data.c      |   20 +-
+ arch/arm/mach-omap2/serial.c                     |   14 +-
+ arch/arm/mach-omap2/sr_device.c                  |    6 +-
+ arch/arm/plat-omap/i2c.c                         |    8 +-
  arch/arm/plat-omap/include/plat/clock.h          |    2 -
  arch/arm/plat-omap/include/plat/common.h         |    9 +
  arch/arm/plat-omap/include/plat/cpu.h            |  108 +---
  arch/arm/plat-omap/include/plat/io.h             |    2 +-
+ arch/arm/plat-omap/include/plat/omap_device.h    |   30 +-
  arch/arm/plat-omap/include/plat/omap_hwmod.h     |    2 -
- 57 files changed, 1430 insertions(+), 2036 deletions(-)
+ arch/arm/plat-omap/mcbsp.c                       |   27 -
+ arch/arm/plat-omap/omap_device.c                 |  185 +++---
+ 77 files changed, 1645 insertions(+), 2281 deletions(-)
  create mode 100644 arch/arm/mach-omap2/clockdomains2420_data.c
  create mode 100644 arch/arm/mach-omap2/clockdomains2430_data.c
  create mode 100644 arch/arm/mach-omap2/clockdomains3xxx_data.c
#1 lore raw

[GIT PULL] omap cleanup part3 for v3.2 merge window

Hi Arnd,

Please pull omap cleanup part3 into cleanup from:

git://github.com/tmlind/linux.git cleanup-part3

If you did not already pull the earlier updated cleanup, pulling this is enough and will bring that in too.

Regards,

Tony

The following changes since commit 48b48fc996ad98bc7b7cf133882e08cd2331ae11:
Tony Lindgren (1):
Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup

are available in the git repository at:

git://github.com/tmlind/linux.git cleanup-part3

Benoit Cousson (1):
ARM: OMAP2+: Add SoC specific map_io functions

Jarkko Nikula (13):
ARM: OMAP: mcbsp: Remove unused variables from platform data
ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c
ARM: OMAP: mcbsp: Implement generic register access
ARM: OMAP: mcbsp: Make wakeup control generic
ARM: OMAP: mcbsp: Make tranceiver configuration control register access generic
ARM: OMAP: mcbsp: Make threshold based transfer code generic
ARM: OMAP: mcbsp: Use per instance register cache size
ARM: OMAP: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c
ARM: OMAP: mcbsp: Cleanup sidetone control initialization and make it generic
ARM: OMAP: mcbsp: Update mcbsp.h include dependencies
ARM: OMAP: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c
ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src
ARM: OMAP: mcbsp: Start generalize signal muxing functions

Tony Lindgren (2):
ARM: OMAP2+: Use SoC specifc map_io
ARM: OMAP2+: Remove custom init_irq for remaining boards

 arch/arm/mach-omap1/mcbsp.c                |   45 ++++
 arch/arm/mach-omap2/board-2430sdp.c        |    8 +-
 arch/arm/mach-omap2/board-4430sdp.c        |    8 +-
 arch/arm/mach-omap2/board-apollon.c        |    8 +-
 arch/arm/mach-omap2/board-devkit8000.c     |    7 +-
 arch/arm/mach-omap2/board-h4.c             |   15 +-
 arch/arm/mach-omap2/board-n8x0.c           |   12 +-
 arch/arm/mach-omap2/board-omap3beagle.c    |    7 +-
 arch/arm/mach-omap2/board-omap3stalker.c   |    7 +-
 arch/arm/mach-omap2/board-omap3touchbook.c |    7 +-
 arch/arm/mach-omap2/board-omap4panda.c     |    8 +-
 arch/arm/mach-omap2/board-rm680.c          |    8 +-
 arch/arm/mach-omap2/board-rx51.c           |    8 +-
 arch/arm/mach-omap2/common.c               |   18 ++
 arch/arm/mach-omap2/mcbsp.c                |  103 ++++++---
 arch/arm/plat-omap/devices.c               |   46 ----
 arch/arm/plat-omap/include/plat/common.h   |    4 +
 arch/arm/plat-omap/include/plat/mcbsp.h    |  208 +++++-----------
 arch/arm/plat-omap/mcbsp.c                 |  358 +++++++++++++---------------
 19 files changed, 379 insertions(+), 506 deletions(-)
#2 lore raw

[GIT PULL] omap cleanup part3 for v3.2 merge window

Quoted 7 lines · Tony Lindgren

Please pull omap cleanup part3 into cleanup from:

git://github.com/tmlind/linux.git cleanup-part3

If you did not already pull the earlier updated cleanup, pulling this is enough and will bring that in too.

Ok, I've ended up replacing the merge into the next/cleanup branch to get a cleaner history, so the cleanup-part2 no longer shows up there.

Thanks!

Arnd

#3 lore raw

[GIT PULL] omap cleanup part3 for v3.2 merge window

Quoted 5 lines · Arnd Bergmann
Quoted 4 lines · Tony Lindgren

Please pull omap cleanup part3 into cleanup from:

git://github.com/tmlind/linux.git cleanup-part3

Quoted 7 lines
Quoted 3 lines

If you did not already pull the earlier updated cleanup, pulling this is enough and will bring that in too.

Ok, I've ended up replacing the merge into the next/cleanup branch to get a cleaner history, so the cleanup-part2 no longer shows up there.

Great thanks!

Tony

#4 lore raw
In reply to Tony Lindgren
Quoted 7 lines · Tony Lindgren

Please pull omap cleanup branch again from:

git://github.com/tmlind/linux.git cleanup

This contains a fix for earlier cleanup patches and has omap_device cleanup and PM cleanup merged in.

Quoted 6 lines

As some of the later cleanup was based on a -rc6 while the earlier branch was based on -rc4, the git request pull against the earlier cleanup produces noise.

So instead, below is a diff to the previous pull request against -rc7 that show the incremental changes.

Pulled, thanks.

Sorry for the delay.

Arnd