Skip to contentSkip to conversation

RCU commits for 3.1

GIT PULL Ingo Molnar 6 participants 32 messages Oct 4, 2011 – Nov 8, 2011 4 messages not in the archive

Subsystems (3)
lore
Share & tools
lore
#4 lore raw
In reply to a message not in the archive
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36

Config and full bootlog attached.

Thanks,

Ingo

#5 lore raw
Quoted 94 lines · Ingo Molnar
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36
Quoted 1 line

Config and full bootlog attached.

Hello, Ingo,

It appears that inlining has defeated me, so I tried reproducing under KVM, using the closest bootable approximation to your .config (attached). I booted ten times without seeing this error. I have my changes against 3.1-rc8. I will try against 3.1, but in the meantime any enlightenment would be most welcome. ;-)

Thanx, Paul

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.1.0-rc8 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_KTIME_SCALAR=y CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/home/kvm/initrd"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
# CONFIG_INITRAMFS_COMPRESSION_XZ is not set
# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_RDC321X is not set CONFIG_X86_32_NON_STANDARD=y CONFIG_X86_NUMAQ=y
CONFIG_X86_SUMMIT=y
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set # CONFIG_PARAVIRT_GUEST is not set CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_SUMMIT_NUMA=y CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set CONFIG_X86_GENERIC=y CONFIG_X86_INTERNODE_CACHE_SHIFT=7 CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y CONFIG_CMPXCHG_DOUBLE=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=5 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y CONFIG_IRQ_TIME_ACCOUNTING=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set # CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_HIGHMEM64G=y CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=4 CONFIG_HAVE_ARCH_BOOTMEM=y CONFIG_HAVE_ARCH_ALLOC_REMAP=y CONFIG_ARCH_HAVE_MEMORY_PRESENT=y CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_HAVE_MEMBLOCK=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_IBM=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_TSI57X=y
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
CONFIG_RAPIDIO_DEBUG=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set CONFIG_NET_IPGRE_DEMUX=y
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_EDSA is not set CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_NET_DSA_MV88E6XXX=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
# CONFIG_BAYCOM_PAR is not set
# CONFIG_BAYCOM_EPP is not set
CONFIG_YAM=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
# CONFIG_MAC80211_TKIP_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=y
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_OSD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
# CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=y
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=y
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_RZ1000=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_ISCSI_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_NET_SB1000=y
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set CONFIG_LSI_ET1011C_PHY=y CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set CONFIG_ETHOC=y
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NE2_MCA=y
# CONFIG_IBMLANA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set CONFIG_KSZ884X_PCI=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set CONFIG_KS8851_MLL=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set CONFIG_HAMACHI=y
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_JME=y
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
# CONFIG_NETDEV_10000 is not set CONFIG_TR=y
CONFIG_IBMTR=y
CONFIG_IBMOL=y
CONFIG_IBMLS=y
CONFIG_3C359=y
# CONFIG_TMS380TR is not set CONFIG_SMCTR=y
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set CONFIG_AIRO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_AT76C50X_USB=y
# CONFIG_PRISM54 is not set CONFIG_USB_ZD1201=y
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set CONFIG_ATH_COMMON=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K=y
# CONFIG_ATH9K_PCI is not set
# CONFIG_ATH9K_AHB is not set CONFIG_ATH9K_DEBUGFS=y CONFIG_ATH9K_RATE_CONTROL=y CONFIG_ATH9K_HTC=y CONFIG_ATH9K_HTC_DEBUGFS=y CONFIG_CARL9170=y
# CONFIG_CARL9170_LEDS is not set CONFIG_CARL9170_WPC=y
CONFIG_B43=y
CONFIG_B43_SSB=y CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set CONFIG_B43LEGACY=y CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set CONFIG_HOSTAP_PCI=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y
CONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set CONFIG_P54_COMMON=y
# CONFIG_P54_USB is not set CONFIG_P54_PCI=y
CONFIG_P54_LEDS=y
# CONFIG_RT2X00 is not set CONFIG_RTL8192CE=y
# CONFIG_RTL8192SE is not set CONFIG_RTL8192DE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTL8192C_COMMON=y
CONFIG_WL1251=y
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set CONFIG_MWIFIEX=y

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#
# CONFIG_WIMAX_I2400M_USB is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_NET_CX82310_ETH=y
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_WAN=y
# CONFIG_HDLC is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
# CONFIG_IEEE802154_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
# CONFIG_RIONET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_VMXNET3=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=y

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=y
# CONFIG_GIGASET_M105 is not set
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_N_GSM=y
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_TIMBERDALE=y CONFIG_SERIAL_ALTERA_JTAGUART=y CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set CONFIG_NVRAM=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=y

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_ML_IOH=y
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_GPIO=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB8500_CORE is not set
CONFIG_MFD_CS5535=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_RC_CORE=y
CONFIG_LIRC=y
# CONFIG_RC_MAP is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_LIRC_CODEC is not set
CONFIG_IR_ENE=y
CONFIG_IR_IMON=y
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=y
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_STREAMZAP=y
# CONFIG_IR_WINBOND_CIR is not set
CONFIG_RC_LOOPBACK=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#

#
# Multistandard (cable + terrestrial) frontends
#

#
# DVB-S (satellite) frontends
#

#
# DVB-T (terrestrial) frontends
#

#
# DVB-C (cable) frontends
#

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #

#
# ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_APPLE=y
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#

# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_AIO=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
# CONFIG_TC1100_WMI is not set
CONFIG_HP_ACCEL=y
# CONFIG_HP_WMI is not set
CONFIG_PANASONIC_LAPTOP=y
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_EEEPC_LAPTOP=y
CONFIG_ASUS_WMI=y
# CONFIG_ASUS_NB_WMI is not set
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_ACPI_CMPC=y
# CONFIG_INTEL_IPS is not set
CONFIG_IBM_RTL=y
CONFIG_XO15_EBOOK=y
# CONFIG_MXM_WMI is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_VIRT_DRIVERS=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
# CONFIG_GOOGLE_SMI is not set
CONFIG_GOOGLE_MEMCONSOLE=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_EXOFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_LKDTM=y
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_HIDRAW is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_TOMOYO is not set CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
# CONFIG_VHOST_NET is not set
CONFIG_LGUEST=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.0-rc8+ (paulmck@paulmck-ThinkPad-W500) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #36 SMP Mon Oct 24 02:35:40 PDT 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[    0.000000]  BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x1000000
[    0.000000] found SMP MP-table at [c00fdbb0] fdbb0
[    0.000000] initial memory mapped : 0 - 04400000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001fffd000 page 4k
[    0.000000] kernel direct mapping tables up to 1fffd000 @ 43fa000-4400000
[    0.000000] ACPI: RSDP 000fdb60 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 1fffde10 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 1ffffe40 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 1fffdfd0 01E22 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
[    0.000000] ACPI: FACS 1ffffe00 00040
[    0.000000] ACPI: SSDT 1fffdf80 00044 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 1fffde90 0007A (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 1fffde50 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000001fffd000
[    0.000000] node 0 pfn: [0 - 1fffd]
[    0.000000] remap_alloc: node 0 [1f800000-1fe00000) -> [df200000-df800000)
[    0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
[    0.000000]   NODE_DATA [000000001f200000 - 000000001f201fff] (remapped)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] max_low_pfn = 1fffd, highstart_pfn = 1fffd
[    0.000000] Low memory ends at vaddr dfffd000
[    0.000000] High memory starts at vaddr dfffd000
[    0.000000]   mapped low ram: 0 - 1fffd000
[    0.000000]   low ram: 0 - 1fffd000
[    0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   10 
[    0.000000] Node: 0, start_pfn: 100, end_pfn: 1fffd
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fffd
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fffd
[    0.000000] On node 0 totalpages: 130956
[    0.000000] free_area_init_node: node 0, pgdat df200000, node_mem_map df202200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125981 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] MPTABLE: OEM ID: BOCHSCPU
[    0.000000] MPTABLE: Product ID: 0.1         
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Warning! Not a NUMA-Q system!
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffbc000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 330 pages/cpu @dee00000 s1335616 r0 d16064 u2097152
[    0.000000] pcpu-alloc: s1335616 r0 d16064 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129932
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda noapic selinux=0 console=ttyS0 initcall_debug debug
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 459476k/524276k available (10699k kernel code, 64348k reserved, 4088k data, 27024k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffe6e000 - 0xfffff000   (1604 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xe07fd000 - 0xff9fe000   ( 498 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfffd000   ( 511 MB)
[    0.000000]       .init : 0xc1e71000 - 0xc38d5000   (27024 kB)
[    0.000000]       .data : 0xc1a72c16 - 0xc1e70d80   (4088 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1a72c16   (10699 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	RCU torture testing starts during boot.
[    0.000000] NR_IRQS:2304 nr_irqs:56 16
[    0.000000] CPU 0 irqstacks, hard=de80a000 soft=de80c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3823 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 2527.067 MHz processor.
[    0.040008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.13 BogoMIPS (lpj=10108268)
[    0.041874] pid_max: default: 32768 minimum: 301
[    0.044105] Security Framework initialized
[    0.044832] SELinux:  Initializing.
[    0.045536] SELinux:  Starting in permissive mode
[    0.046384] AppArmor: AppArmor disabled by boot time parameter
[    0.047516] Mount-cache hash table entries: 512
[    0.049045] Initializing cgroup subsys cpuacct
[    0.049836] Initializing cgroup subsys freezer
[    0.050630] Initializing cgroup subsys blkio
[    0.052039] Initializing cgroup subsys perf_event
[    0.052973] numa_add_cpu cpu 0 node 0: mask now 0
[    0.057181] ACPI: Core revision 20110623
[    0.060120] ACPI: setting ELCR to 0200 (from 0c00)
[    0.061315] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.062361] CPU0: Intel Pentium II (Klamath) stepping 03
[    0.064003] calling  init_hw_perf_events+0x0/0x632 @ 1
[    0.064003] Performance Events: Broken PMU hardware detected, using software events only.
[    0.064003] initcall init_hw_perf_events+0x0/0x632 returned 0 after 0 usecs
[    0.064003] calling  migration_init+0x0/0x5b @ 1
[    0.064016] initcall migration_init+0x0/0x5b returned 0 after 0 usecs
[    0.065096] calling  spawn_ksoftirqd+0x0/0x45 @ 1
[    0.066015] initcall spawn_ksoftirqd+0x0/0x45 returned 0 after 0 usecs
[    0.067107] calling  init_workqueues+0x0/0x290 @ 1
[    0.068211] initcall init_workqueues+0x0/0x290 returned 0 after 0 usecs
[    0.069322] calling  cpu_stop_init+0x0/0xc3 @ 1
[    0.070193] initcall cpu_stop_init+0x0/0xc3 returned 0 after 0 usecs
[    0.071266] calling  rcu_scheduler_really_started+0x0/0x11 @ 1
[    0.072009] initcall rcu_scheduler_really_started+0x0/0x11 returned 0 after 0 usecs
[    0.073301] calling  relay_init+0x0/0x11 @ 1
[    0.074044] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[    0.076183] lockdep: fixing up alternatives.
[    0.077153] CPU 1 irqstacks, hard=de872000 soft=de874000
[    0.078061] Booting Node   0, Processors  #1 Ok.
[    0.078875] smpboot cpu 1: start_ip = 9b000
[    0.044002] Initializing CPU#1
[    0.044002] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4288094440 >=post_end=13346004
[    0.044002] numa_add_cpu cpu 1 node 0: mask now 0-1
[    0.176070] Brought up 2 CPUs
[    0.176612] Total of 2 processors activated (10108.37 BogoMIPS).
[    0.180020] devtmpfs: initialized
[    0.180669] device: 'platform': device_add
[    0.181435] PM: Adding info for No Bus:platform
[    0.182274] bus: 'platform': registered
[    0.182942] Registering sysdev class 'cpu'
[    0.184045] calling  init_mmap_min_addr+0x0/0x20 @ 1
[    0.184887] initcall init_mmap_min_addr+0x0/0x20 returned 0 after 0 usecs
[    0.186081] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.187220] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.188016] calling  net_ns_init+0x0/0xef @ 1
[    0.188846] initcall net_ns_init+0x0/0xef returned 0 after 0 usecs
[    0.189286] calling  e820_mark_nvs_memory+0x0/0x39 @ 1
[    0.190327] initcall e820_mark_nvs_memory+0x0/0x39 returned 0 after 0 usecs
[    0.192022] calling  cpufreq_tsc+0x0/0x26 @ 1
[    0.192769] initcall cpufreq_tsc+0x0/0x26 returned 0 after 0 usecs
[    0.193834] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.194628] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.196016] calling  reboot_init+0x0/0x11 @ 1
[    0.196781] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.197861] calling  init_lapic_sysfs+0x0/0x1b @ 1
[    0.198693] initcall init_lapic_sysfs+0x0/0x1b returned 0 after 0 usecs
[    0.200040] calling  init_smp_flush+0x0/0x3b @ 1
[    0.200843] initcall init_smp_flush+0x0/0x3b returned 0 after 0 usecs
[    0.201979] calling  alloc_frozen_cpus+0x0/0x10 @ 1
[    0.202805] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
[    0.204018] calling  sysctl_init+0x0/0x13 @ 1
[    0.204778] initcall sysctl_init+0x0/0x13 returned 0 after 0 usecs
[    0.205836] calling  ksysfs_init+0x0/0x74 @ 1
[    0.206616] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[    0.208029] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.208997] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.210342] calling  pm_init+0x0/0x61 @ 1
[    0.211182] initcall pm_init+0x0/0x61 returned 0 after 0 usecs
[    0.212017] calling  pm_disk_init+0x0/0x14 @ 1
[    0.212798] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.213891] calling  swsusp_header_init+0x0/0x30 @ 1
[    0.214736] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[    0.216018] calling  init_zero_pfn+0x0/0x57 @ 1
[    0.216806] initcall init_zero_pfn+0x0/0x57 returned 0 after 0 usecs
[    0.217891] calling  fsnotify_init+0x0/0x2e @ 1
[    0.218669] initcall fsnotify_init+0x0/0x2e returned 0 after 0 usecs
[    0.220018] calling  filelock_init+0x0/0x2f @ 1
[    0.220798] initcall filelock_init+0x0/0x2f returned 0 after 0 usecs
[    0.221891] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.222754] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.224021] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.224815] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.225944] calling  debugfs_init+0x0/0x4a @ 1
[    0.226740] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.227792] calling  securityfs_init+0x0/0x41 @ 1
[    0.228023] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[    0.229135] calling  random32_init+0x0/0xa3 @ 1
[    0.229930] initcall random32_init+0x0/0xa3 returned 0 after 0 usecs
[    0.231188] calling  virtio_init+0x0/0x30 @ 1
[    0.232071] bus: 'virtio': registered
[    0.232725] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
[    0.233794] calling  regulator_init+0x0/0x5e @ 1
[    0.234592] device class 'regulator': registering
[    0.236157] Registering platform device 'reg-dummy'. Parent at platform
[    0.237367] device: 'reg-dummy': device_add
[    0.238165] bus: 'platform': add device reg-dummy
[    0.239030] PM: Adding info for platform:reg-dummy
[    0.240054] bus: 'platform': add driver reg-dummy
[    0.240858] bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy
[    0.242408] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
[    0.243829] device: 'regulator.0': device_add
[    0.244107] PM: Adding info for No Bus:regulator.0
[    0.244997] print_constraints: dummy: 
[    0.245710] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
[    0.246881] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
[    0.248052] initcall regulator_init+0x0/0x5e returned 0 after 15625 usecs
[    0.249216] calling  cpufreq_core_init+0x0/0x7f @ 1
[    0.250093] initcall cpufreq_core_init+0x0/0x7f returned 0 after 0 usecs
[    0.252020] calling  cpuidle_init+0x0/0x36 @ 1
[    0.252787] initcall cpuidle_init+0x0/0x36 returned 0 after 0 usecs
[    0.253988] calling  sock_init+0x0/0x73 @ 1
[    0.254964] initcall sock_init+0x0/0x73 returned 0 after 0 usecs
[    0.255974] calling  net_inuse_init+0x0/0x24 @ 1
[    0.256037] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[    0.257136] calling  netpoll_init+0x0/0x39 @ 1
[    0.257919] initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
[    0.258990] calling  netlink_proto_init+0x0/0x179 @ 1
[    0.260101] NET: Registered protocol family 16
[    0.260934] initcall netlink_proto_init+0x0/0x179 returned 0 after 0 usecs
[    0.262123] calling  bdi_class_init+0x0/0x40 @ 1
[    0.262900] device class 'bdi': registering
[    0.264043] initcall bdi_class_init+0x0/0x40 returned 0 after 3906 usecs
[    0.265188] calling  kobject_uevent_init+0x0/0x1e @ 1
[    0.266076] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[    0.267259] calling  gpiolib_sysfs_init+0x0/0x74 @ 1
[    0.268020] device class 'gpio': registering
[    0.268810] initcall gpiolib_sysfs_init+0x0/0x74 returned 0 after 0 usecs
[    0.269977] calling  pcibus_class_init+0x0/0x14 @ 1
[    0.270826] device class 'pci_bus': registering
[    0.272037] initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs
[    0.273223] calling  pci_driver_init+0x0/0xf @ 1
[    0.274055] bus: 'pci': registered
[    0.274770] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    0.276022] calling  rio_bus_init+0x0/0x2c @ 1
[    0.276790] device: 'rapidio': device_add
[    0.277514] PM: Adding info for No Bus:rapidio
[    0.278314] bus: 'rapidio': registered
[    0.278961] initcall rio_bus_init+0x0/0x2c returned 0 after 0 usecs
[    0.280022] calling  lcd_class_init+0x0/0x45 @ 1
[    0.280804] device class 'lcd': registering
[    0.281574] initcall lcd_class_init+0x0/0x45 returned 0 after 0 usecs
[    0.282710] calling  backlight_class_init+0x0/0x53 @ 1
[    0.283573] device class 'backlight': registering
[    0.284042] initcall backlight_class_init+0x0/0x53 returned 0 after 3906 usecs
[    0.285281] calling  tty_class_init+0x0/0x2f @ 1
[    0.286093] device class 'tty': registering
[    0.286811] initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
[    0.288025] calling  vtconsole_class_init+0x0/0xc2 @ 1
[    0.288908] device class 'vtconsole': registering
[    0.289743] device: 'vtcon0': device_add
[    0.290457] PM: Adding info for No Bus:vtcon0
[    0.291224] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
[    0.292023] calling  wakeup_sources_debugfs_init+0x0/0x2f @ 1
[    0.293023] initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs
[    0.294326] calling  register_node_type+0x0/0xf @ 1
[    0.295149] Registering sysdev class 'node'
[    0.296042] initcall register_node_type+0x0/0xf returned 0 after 3906 usecs
[    0.297453] calling  amd_postcore_init+0x0/0x1a @ 1
[    0.298457] initcall amd_postcore_init+0x0/0x1a returned 0 after 0 usecs
[    0.300024] calling  arch_kdebugfs_init+0x0/0x28 @ 1
[    0.300933] initcall arch_kdebugfs_init+0x0/0x28 returned 0 after 0 usecs
[    0.302098] calling  init_pit_clocksource+0x0/0x2d @ 1
[    0.302972] initcall init_pit_clocksource+0x0/0x2d returned 0 after 0 usecs
[    0.304026] calling  configure_trampolines+0x0/0x1f @ 1
[    0.304932] initcall configure_trampolines+0x0/0x1f returned 0 after 0 usecs
[    0.306137] calling  mtrr_if_init+0x0/0x56 @ 1
[    0.306899] initcall mtrr_if_init+0x0/0x56 returned -19 after 0 usecs
[    0.308023] calling  ffh_cstate_init+0x0/0x27 @ 1
[    0.308837] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs
[    0.309957] calling  acpi_pci_init+0x0/0x5a @ 1
[    0.310752] ACPI: bus type pci registered
[    0.311437] initcall acpi_pci_init+0x0/0x5a returned 0 after 0 usecs
[    0.312024] calling  init_cyclone_clocksource+0x0/0x177 @ 1
[    0.312982] initcall init_cyclone_clocksource+0x0/0x177 returned -19 after 0 usecs
[    0.314276] calling  pci_arch_init+0x0/0x65 @ 1
[    0.316444] PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=0
[    0.317533] PCI: Using configuration type 1 for base access
[    0.318517] initcall pci_arch_init+0x0/0x65 returned 0 after 3906 usecs
[    0.319630] calling  topology_init+0x0/0xa4 @ 1
[    0.320030] Registering sys device of class 'node'
[    0.320896] Registering sys device 'node0'
[    0.321785] Registering sys device of class 'cpu'
[    0.322763] Registering sys device 'cpu0'
[    0.323468] Registering sys device of class 'cpu'
[    0.324027] Registering sys device 'cpu1'
[    0.324748] initcall topology_init+0x0/0xa4 returned 0 after 3906 usecs
[    0.325899] calling  mtrr_init_finialize+0x0/0x30 @ 1
[    0.326817] initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs
[    0.328025] calling  mca_init+0x0/0x2be @ 1
[    0.328782] bus: 'MCA': registered
[    0.329376] initcall mca_init+0x0/0x2be returned -19 after 0 usecs
[    0.330449] calling  param_sysfs_init+0x0/0x10d @ 1
[    0.342326] initcall param_sysfs_init+0x0/0x10d returned 0 after 11719 usecs
[    0.343528] calling  pm_sysrq_init+0x0/0x20 @ 1
[    0.344039] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[    0.345197] calling  default_bdi_init+0x0/0xb2 @ 1
[    0.346303] device: 'default': device_add
[    0.346303] PM: Adding info for No Bus:default
[    0.348117] initcall default_bdi_init+0x0/0xb2 returned 0 after 3906 usecs
[    0.349313] calling  init_bio+0x0/0xdc @ 1
[    0.350071] bio: create slab <bio-0> at 0
[    0.350798] initcall init_bio+0x0/0xdc returned 0 after 0 usecs
[    0.352028] calling  fsnotify_notification_init+0x0/0x9c @ 1
[    0.353017] initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs
[    0.354345] calling  cryptomgr_init+0x0/0xf @ 1
[    0.355115] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    0.356026] calling  blk_settings_init+0x0/0x21 @ 1
[    0.357000] initcall blk_settings_init+0x0/0x21 returned 0 after 0 usecs
[    0.358223] calling  blk_ioc_init+0x0/0x2f @ 1
[    0.358978] initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
[    0.360027] calling  blk_softirq_init+0x0/0x69 @ 1
[    0.360862] initcall blk_softirq_init+0x0/0x69 returned 0 after 0 usecs
[    0.361992] calling  blk_iopoll_setup+0x0/0x8e @ 1
[    0.362814] initcall blk_iopoll_setup+0x0/0x8e returned 0 after 0 usecs
[    0.364027] calling  genhd_device_init+0x0/0x6a @ 1
[    0.364869] device class 'block': registering
[    0.365704] initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs
[    0.365704] calling  gpiolib_debugfs_init+0x0/0x2a @ 1
[    0.368040] initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
[    0.369235] calling  pci_slot_init+0x0/0x40 @ 1
[    0.370054] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[    0.371124] calling  acpi_init+0x0/0xab @ 1
[    0.372046] ACPI: Added _OSI(Module Device)
[    0.372770] ACPI: Added _OSI(Processor Device)
[    0.373529] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.374360] ACPI: Added _OSI(Processor Aggregator Device)
[    0.378236] ACPI: EC: Look up EC in DSDT
[    0.384495] ACPI: Interpreter enabled
[    0.385132] ACPI: (supports S0 S4 S5)
[    0.385855] ACPI: Using PIC for interrupt routing
[    0.386708] bus: 'acpi': registered
[    0.387306] bus: 'acpi': add driver power
[    0.388125] device: 'LNXSYSTM:00': device_add
[    0.389048] bus: 'acpi': add device LNXSYSTM:00
[    0.389923] PM: Adding info for acpi:LNXSYSTM:00
[    0.390828] device: 'LNXCPU:00': device_add
[    0.391545] bus: 'acpi': add device LNXCPU:00
[    0.392046] PM: Adding info for acpi:LNXCPU:00
[    0.392871] device: 'LNXCPU:01': device_add
[    0.393595] bus: 'acpi': add device LNXCPU:01
[    0.394381] PM: Adding info for acpi:LNXCPU:01
[    0.395216] device: 'device:00': device_add
[    0.396034] bus: 'acpi': add device device:00
[    0.396801] PM: Adding info for acpi:device:00
[    0.397645] device: 'PNP0A03:00': device_add
[    0.398406] bus: 'acpi': add device PNP0A03:00
[    0.399174] PM: Adding info for acpi:PNP0A03:00
[    0.400146] device: 'device:01': device_add
[    0.400877] bus: 'acpi': add device device:01
[    0.401641] PM: Adding info for acpi:device:01
[    0.402531] device: 'device:02': device_add
[    0.403248] bus: 'acpi': add device device:02
[    0.404045] PM: Adding info for acpi:device:02
[    0.404910] device: 'device:03': device_add
[    0.405634] bus: 'acpi': add device device:03
[    0.406429] PM: Adding info for acpi:device:03
[    0.407476] device: 'device:04': device_add
[    0.408044] bus: 'acpi': add device device:04
[    0.408874] PM: Adding info for acpi:device:04
[    0.409744] device: 'device:05': device_add
[    0.410473] bus: 'acpi': add device device:05
[    0.411228] PM: Adding info for acpi:device:05
[    0.412127] device: 'device:06': device_add
[    0.412863] bus: 'acpi': add device device:06
[    0.413639] PM: Adding info for acpi:device:06
[    0.414499] device: 'device:07': device_add
[    0.415216] bus: 'acpi': add device device:07
[    0.416046] PM: Adding info for acpi:device:07
[    0.416918] device: 'device:08': device_add
[    0.417715] bus: 'acpi': add device device:08
[    0.418556] PM: Adding info for acpi:device:08
[    0.419407] device: 'device:09': device_add
[    0.420035] bus: 'acpi': add device device:09
[    0.420811] PM: Adding info for acpi:device:09
[    0.421683] device: 'device:0a': device_add
[    0.422409] bus: 'acpi': add device device:0a
[    0.423182] PM: Adding info for acpi:device:0a
[    0.424175] device: 'device:0b': device_add
[    0.424948] bus: 'acpi': add device device:0b
[    0.425749] PM: Adding info for acpi:device:0b
[    0.426625] device: 'device:0c': device_add
[    0.427341] bus: 'acpi': add device device:0c
[    0.428047] PM: Adding info for acpi:device:0c
[    0.429049] device: 'device:0d': device_add
[    0.429933] bus: 'acpi': add device device:0d
[    0.430797] PM: Adding info for acpi:device:0d
[    0.432137] device: 'device:0e': device_add
[    0.432855] bus: 'acpi': add device device:0e
[    0.433633] PM: Adding info for acpi:device:0e
[    0.434519] device: 'device:0f': device_add
[    0.435234] bus: 'acpi': add device device:0f
[    0.436048] PM: Adding info for acpi:device:0f
[    0.436934] device: 'device:10': device_add
[    0.437705] bus: 'acpi': add device device:10
[    0.438491] PM: Adding info for acpi:device:10
[    0.439343] device: 'device:11': device_add
[    0.440037] bus: 'acpi': add device device:11
[    0.440792] PM: Adding info for acpi:device:11
[    0.441664] device: 'device:12': device_add
[    0.442421] bus: 'acpi': add device device:12
[    0.443175] PM: Adding info for acpi:device:12
[    0.444135] device: 'device:13': device_add
[    0.444863] bus: 'acpi': add device device:13
[    0.445639] PM: Adding info for acpi:device:13
[    0.446522] device: 'device:14': device_add
[    0.447314] bus: 'acpi': add device device:14
[    0.448058] PM: Adding info for acpi:device:14
[    0.448943] device: 'device:15': device_add
[    0.449685] bus: 'acpi': add device device:15
[    0.450594] PM: Adding info for acpi:device:15
[    0.451677] device: 'device:16': device_add
[    0.452038] bus: 'acpi': add device device:16
[    0.452812] PM: Adding info for acpi:device:16
[    0.453686] device: 'device:17': device_add
[    0.454422] bus: 'acpi': add device device:17
[    0.455181] PM: Adding info for acpi:device:17
[    0.456130] device: 'device:18': device_add
[    0.456872] bus: 'acpi': add device device:18
[    0.457649] PM: Adding info for acpi:device:18
[    0.458509] device: 'device:19': device_add
[    0.459229] bus: 'acpi': add device device:19
[    0.460059] PM: Adding info for acpi:device:19
[    0.460932] device: 'device:1a': device_add
[    0.461672] bus: 'acpi': add device device:1a
[    0.462437] PM: Adding info for acpi:device:1a
[    0.463336] device: 'device:1b': device_add
[    0.464039] bus: 'acpi': add device device:1b
[    0.464816] PM: Adding info for acpi:device:1b
[    0.465688] device: 'device:1c': device_add
[    0.466423] bus: 'acpi': add device device:1c
[    0.467182] PM: Adding info for acpi:device:1c
[    0.468130] device: 'device:1d': device_add
[    0.468871] bus: 'acpi': add device device:1d
[    0.469663] PM: Adding info for acpi:device:1d
[    0.470755] device: 'device:1e': device_add
[    0.472040] bus: 'acpi': add device device:1e
[    0.472805] PM: Adding info for acpi:device:1e
[    0.473689] device: 'device:1f': device_add
[    0.474440] bus: 'acpi': add device device:1f
[    0.475197] PM: Adding info for acpi:device:1f
[    0.476164] device: 'device:20': device_add
[    0.476884] bus: 'acpi': add device device:20
[    0.477670] PM: Adding info for acpi:device:20
[    0.478660] device: 'device:21': device_add
[    0.479384] bus: 'acpi': add device device:21
[    0.480052] PM: Adding info for acpi:device:21
[    0.480895] device: 'PNP0B00:00': device_add
[    0.481672] bus: 'acpi': add device PNP0B00:00
[    0.482485] PM: Adding info for acpi:PNP0B00:00
[    0.483368] device: 'PNP0303:00': device_add
[    0.484039] bus: 'acpi': add device PNP0303:00
[    0.484810] PM: Adding info for acpi:PNP0303:00
[    0.485730] device: 'PNP0F13:00': device_add
[    0.486490] bus: 'acpi': add device PNP0F13:00
[    0.487262] PM: Adding info for acpi:PNP0F13:00
[    0.488150] device: 'PNP0700:00': device_add
[    0.488893] bus: 'acpi': add device PNP0700:00
[    0.489670] PM: Adding info for acpi:PNP0700:00
[    0.491458] device: 'PNP0400:00': device_add
[    0.492040] bus: 'acpi': add device PNP0400:00
[    0.492828] PM: Adding info for acpi:PNP0400:00
[    0.493882] device: 'PNP0501:00': device_add
[    0.494796] bus: 'acpi': add device PNP0501:00
[    0.496053] PM: Adding info for acpi:PNP0501:00
[    0.496983] device: 'device:22': device_add
[    0.497712] bus: 'acpi': add device device:22
[    0.498501] PM: Adding info for acpi:device:22
[    0.499428] device: 'PNP0103:00': device_add
[    0.500041] bus: 'acpi': add device PNP0103:00
[    0.500808] PM: Adding info for acpi:PNP0103:00
[    0.501816] device: 'PNP0C0F:00': device_add
[    0.502580] bus: 'acpi': add device PNP0C0F:00
[    0.503350] PM: Adding info for acpi:PNP0C0F:00
[    0.504263] device: 'PNP0C0F:01': device_add
[    0.505024] bus: 'acpi': add device PNP0C0F:01
[    0.505846] PM: Adding info for acpi:PNP0C0F:01
[    0.506813] device: 'PNP0C0F:02': device_add
[    0.507545] bus: 'acpi': add device PNP0C0F:02
[    0.508052] PM: Adding info for acpi:PNP0C0F:02
[    0.509025] device: 'PNP0C0F:03': device_add
[    0.509790] bus: 'acpi': add device PNP0C0F:03
[    0.510563] PM: Adding info for acpi:PNP0C0F:03
[    0.512137] device: 'device:23': device_add
[    0.512854] bus: 'acpi': add device device:23
[    0.513631] PM: Adding info for acpi:device:23
[    0.514531] device: 'LNXPWRBN:00': device_add
[    0.515397] bus: 'acpi': add device LNXPWRBN:00
[    0.516052] PM: Adding info for acpi:LNXPWRBN:00
[    0.517035] bus: 'acpi': add driver ec
[    0.517761] initcall acpi_init+0x0/0xab returned 0 after 140633 usecs
[    0.518875] calling  dock_init+0x0/0x81 @ 1
[    0.521399] ACPI: No dock devices found.
[    0.522077] initcall dock_init+0x0/0x81 returned 0 after 3906 usecs
[    0.523148] calling  acpi_pci_root_init+0x0/0x2a @ 1
[    0.523990] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.524037] bus: 'acpi': add driver pci_root
[    0.524790] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
[    0.526242] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
[    0.528072] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.529217] device: 'pci0000:00': device_add
[    0.530020] PM: Adding info for No Bus:pci0000:00
[    0.530845] device: '0000:00': device_add
[    0.532102] PM: Adding info for No Bus:0000:00
[    0.532936] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.534221] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.536038] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.537504] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[    0.539245] pci_bus 0000:00: scanning bus
[    0.540111] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    0.541142] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
[    0.542460] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x19e
[    0.543640] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[    0.544061] pci 0000:00:00.0: rpm_resume flags 0x0
[    0.544894] pci 0000:00:00.0: rpm_resume returns -13
[    0.545828] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    0.546840] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17
[    0.548459] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x19e
[    0.549616] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2c
[    0.550822] pci 0000:00:01.0: rpm_resume flags 0x0
[    0.551637] pci 0000:00:01.0: rpm_resume returns -13
[    0.552103] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    0.553134] pci 0000:00:01.1: calling quirk_mmio_always_on+0x0/0x17
[    0.554503] pci 0000:00:01.1: reg 20: [io  0xc000-0xc00f]
[    0.556180] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x19e
[    0.557381] pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x2c
[    0.558606] pci 0000:00:01.1: rpm_resume flags 0x0
[    0.559419] pci 0000:00:01.1: rpm_resume returns -13
[    0.560106] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[    0.561285] pci 0000:00:01.3: calling quirk_mmio_always_on+0x0/0x17
[    0.562541] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x37
[    0.564461] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x13f
[    0.565513] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.566794] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.568088] pci 0000:00:01.3: calling quirk_resource_alignment+0x0/0x19e
[    0.569349] pci 0000:00:01.3: calling pci_fixup_transparent_bridge+0x0/0x2c
[    0.570549] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0xf
[    0.572040] pci 0000:00:01.3: rpm_resume flags 0x0
[    0.572854] pci 0000:00:01.3: rpm_resume returns -13
[    0.573813] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    0.574857] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17
[    0.581366] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[    0.585448] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[    0.601777] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[    0.603229] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x19e
[    0.604135] pci 0000:00:02.0: rpm_resume flags 0x0
[    0.604989] pci 0000:00:02.0: rpm_resume returns -13
[    0.606002] pci 0000:00:03.0: [10ec:8139] type 0 class 0x000200
[    0.607064] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17
[    0.608159] pci 0000:00:03.0: reg 10: [io  0xc100-0xc1ff]
[    0.609208] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf20200ff]
[    0.610722] pci 0000:00:03.0: reg 30: [mem 0xf2028000-0xf202ffff pref]
[    0.612064] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x19e
[    0.613235] pci 0000:00:03.0: rpm_resume flags 0x0
[    0.614080] pci 0000:00:03.0: rpm_resume returns -13
[    0.615195] pci_bus 0000:00: fixups for bus
[    0.616049] pci_bus 0000:00: bus scan returning with max=00
[    0.617078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.620451]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e)
[    0.621746] device: '0000:00:00.0': device_add
[    0.623772] bus: 'pci': add device 0000:00:00.0
[    0.624143] PM: Adding info for pci:0000:00:00.0
[    0.625088] device: '0000:00:01.0': device_add
[    0.627105] bus: 'pci': add device 0000:00:01.0
[    0.628094] PM: Adding info for pci:0000:00:01.0
[    0.629073] device: '0000:00:01.1': device_add
[    0.631007] bus: 'pci': add device 0000:00:01.1
[    0.632107] PM: Adding info for pci:0000:00:01.1
[    0.632913] device: '0000:00:01.3': device_add
[    0.634869] bus: 'pci': add device 0000:00:01.3
[    0.635689] PM: Adding info for pci:0000:00:01.3
[    0.636060] device: '0000:00:02.0': device_add
[    0.638025] bus: 'pci': add device 0000:00:02.0
[    0.638855] PM: Adding info for pci:0000:00:02.0
[    0.640059] device: '0000:00:03.0': device_add
[    0.642010] bus: 'pci': add device 0000:00:03.0
[    0.642839] PM: Adding info for pci:0000:00:03.0
[    0.643647] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
[    0.644049] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
[    0.645478] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 121101 usecs
[    0.646793] calling  acpi_pci_link_init+0x0/0x3f @ 1
[    0.648052] bus: 'acpi': add driver pci_link
[    0.648881] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
[    0.650392] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
[    0.652205] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.653350] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
[    0.654608] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
[    0.656050] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
[    0.657539] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
[    0.658968] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.660350] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
[    0.661521] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
[    0.662807] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
[    0.664046] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
[    0.665474] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.666576] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
[    0.668046] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
[    0.669328] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
[    0.670795] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
[    0.672128] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.673215] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
[    0.674400] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
[    0.675670] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 23438 usecs
[    0.676050] calling  pnp_init+0x0/0xf @ 1
[    0.676837] bus: 'pnp': registered
[    0.677451] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[    0.678497] calling  misc_init+0x0/0xad @ 1
[    0.680080] device class 'misc': registering
[    0.680904] initcall misc_init+0x0/0xad returned 0 after 0 usecs
[    0.681969] calling  vga_arb_device_init+0x0/0xcc @ 1
[    0.682922] device: 'vga_arbiter': device_add
[    0.684078] PM: Adding info for No Bus:vga_arbiter
[    0.685014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.686463] vgaarb: loaded
[    0.686955] vgaarb: bridge control possible 0000:00:02.0
[    0.688048] initcall vga_arb_device_init+0x0/0xcc returned 0 after 7812 usecs
[    0.689320] calling  tifm_init+0x0/0x78 @ 1
[    0.690363] bus: 'tifm': registered
[    0.690363] device class 'tifm_adapter': registering
[    0.692062] initcall tifm_init+0x0/0x78 returned 0 after 3906 usecs
[    0.693168] calling  init_scsi+0x0/0x80 @ 1
[    0.694174] device class 'scsi_host': registering
[    0.695082] bus: 'scsi': registered
[    0.695677] device class 'scsi_device': registering
[    0.696135] SCSI subsystem initialized
[    0.696797] initcall init_scsi+0x0/0x80 returned 0 after 3906 usecs
[    0.697882] calling  ata_init+0x0/0x54 @ 1
[    0.698664] device class 'ata_link': registering
[    0.700060] device class 'ata_port': registering
[    0.700855] device class 'ata_device': registering
[    0.701721] libata version 3.00 loaded.
[    0.702427] initcall ata_init+0x0/0x54 returned 0 after 3906 usecs
[    0.703466] calling  phy_init+0x0/0x2a @ 1
[    0.704054] device class 'mdio_bus': registering
[    0.704902] bus: 'mdio_bus': registered
[    0.705565] bus: 'mdio_bus': add driver Generic PHY
[    0.706446] initcall phy_init+0x0/0x2a returned 0 after 0 usecs
[    0.707441] calling  init_pcmcia_cs+0x0/0x2d @ 1
[    0.708066] device class 'pcmcia_socket': registering
[    0.708951] initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 usecs
[    0.710074] calling  usb_init+0x0/0x142 @ 1
[    0.710939] bus: 'usb': registered
[    0.712071] bus: 'usb': add driver usbfs
[    0.712811] usbcore: registered new interface driver usbfs
[    0.713804] bus: 'usb': add driver hub
[    0.714505] usbcore: registered new interface driver hub
[    0.715535] bus: 'usb': add driver usb
[    0.716066] usbcore: registered new device driver usb
[    0.716934] initcall usb_init+0x0/0x142 returned 0 after 7812 usecs
[    0.718024] calling  nop_usb_xceiv_init+0x0/0xf @ 1
[    0.718873] bus: 'platform': add driver nop_usb_xceiv
[    0.720051] initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 3906 usecs
[    0.721348] calling  serio_init+0x0/0x2e @ 1
[    0.722125] bus: 'serio': registered
[    0.722752] initcall serio_init+0x0/0x2e returned 0 after 0 usecs
[    0.723773] calling  gameport_init+0x0/0x2e @ 1
[    0.724083] bus: 'gameport': registered
[    0.724755] initcall gameport_init+0x0/0x2e returned 0 after 0 usecs
[    0.725841] calling  input_init+0x0/0xfd @ 1
[    0.726589] device class 'input': registering
[    0.727355] initcall input_init+0x0/0xfd returned 0 after 0 usecs
[    0.728050] calling  rtc_init+0x0/0x55 @ 1
[    0.728768] device class 'rtc': registering
[    0.729506] initcall rtc_init+0x0/0x55 returned 0 after 0 usecs
[    0.730526] calling  init_dvbdev+0x0/0xc2 @ 1
[    0.732065] device class 'dvb': registering
[    0.732789] initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs
[    0.733849] calling  pps_init+0x0/0xa2 @ 1
[    0.734574] device class 'pps': registering
[    0.735300] pps_core: LinuxPPS API ver. 1 registered
[    0.736049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.737632] initcall pps_init+0x0/0xa2 returned 0 after 3906 usecs
[    0.738698] calling  power_supply_class_init+0x0/0x39 @ 1
[    0.739615] device class 'power_supply': registering
[    0.740069] initcall power_supply_class_init+0x0/0x39 returned 0 after 3906 usecs
[    0.741342] calling  hwmon_init+0x0/0x40 @ 1
[    0.742108] device class 'hwmon': registering
[    0.742859] initcall hwmon_init+0x0/0x40 returned 0 after 0 usecs
[    0.744051] calling  leds_init+0x0/0x3d @ 1
[    0.744790] device class 'leds': registering
[    0.745537] initcall leds_init+0x0/0x3d returned 0 after 0 usecs
[    0.746571] calling  acpi_wmi_init+0x0/0x64 @ 1
[    0.747338] device class 'wmi': registering
[    0.748063] bus: 'acpi': add driver wmi
[    0.748788] wmi: Mapper loaded
[    0.749311] initcall acpi_wmi_init+0x0/0x64 returned 0 after 3906 usecs
[    0.750584] calling  pci_subsys_init+0x0/0x46 @ 1
[    0.751395] PCI: Using ACPI for IRQ routing
[    0.752060] PCI: pci_cache_line_size set to 32 bytes
[    0.752955] pci 0000:00:01.1: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[    0.754402] pci 0000:00:01.1: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
[    0.756056] pci 0000:00:01.1: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
[    0.757444] pci 0000:00:01.1: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
[    0.758741] pci 0000:00:01.1: BAR 4: reserving [io  0xc000-0xc00f flags 0x40101] (d=0, p=0)
[    0.760078] pci 0000:00:02.0: BAR 0: reserving [mem 0xf0000000-0xf1ffffff flags 0x42208] (d=0, p=0)
[    0.761617] pci 0000:00:02.0: BAR 1: reserving [mem 0xf2000000-0xf2000fff flags 0x40200] (d=0, p=0)
[    0.763185] pci 0000:00:03.0: BAR 0: reserving [io  0xc100-0xc1ff flags 0x40101] (d=0, p=0)
[    0.764053] pci 0000:00:03.0: BAR 1: reserving [mem 0xf2020000-0xf20200ff flags 0x40200] (d=0, p=0)
[    0.765715] reserve RAM buffer: 000000000009f400 - 000000000009ffff 
[    0.766765] reserve RAM buffer: 000000001fffd000 - 000000001fffffff 
[    0.768063] initcall pci_subsys_init+0x0/0x46 returned 0 after 19532 usecs
[    0.769284] calling  proto_init+0x0/0xf @ 1
[    0.770042] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    0.771051] calling  net_dev_init+0x0/0x1f5 @ 1
[    0.772080] device class 'net': registering
[    0.772905] device: 'lo': device_add
[    0.773694] PM: Adding info for No Bus:lo
[    0.774507] initcall net_dev_init+0x0/0x1f5 returned 0 after 0 usecs
[    0.776055] calling  neigh_init+0x0/0xa4 @ 1
[    0.776818] initcall neigh_init+0x0/0xa4 returned 0 after 0 usecs
[    0.777928] calling  fib_rules_init+0x0/0xbd @ 1
[    0.778775] initcall fib_rules_init+0x0/0xbd returned 0 after 0 usecs
[    0.779872] calling  genl_init+0x0/0x76 @ 1
[    0.780112] initcall genl_init+0x0/0x76 returned 0 after 0 usecs
[    0.781248] calling  cfg80211_init+0x0/0xbc @ 1
[    0.782069] device class 'ieee80211': registering
[    0.783021] Registering platform device 'regulatory.0'. Parent at platform
[    0.784053] device: 'regulatory.0': device_add
[    0.784833] bus: 'platform': add device regulatory.0
[    0.785722] PM: Adding info for platform:regulatory.0
[    0.786700] cfg80211: Calling CRDA to update world regulatory domain
[    0.788164] initcall cfg80211_init+0x0/0xbc returned 0 after 7812 usecs
[    0.789305] calling  wireless_nlevent_init+0x0/0xf @ 1
[    0.790216] initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
[    0.792054] calling  ieee80211_init+0x0/0x39 @ 1
[    0.793163] initcall ieee80211_init+0x0/0x39 returned 0 after 0 usecs
[    0.794291] calling  wpan_phy_class_init+0x0/0x33 @ 1
[    0.795264] device class 'ieee802154': registering
[    0.796096] initcall wpan_phy_class_init+0x0/0x33 returned 0 after 3906 usecs
[    0.797313] calling  sysctl_init+0x0/0x3b @ 1
[    0.798079] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[    0.799164] calling  init_amd_nbs+0x0/0x39 @ 1
[    0.800082] initcall init_amd_nbs+0x0/0x39 returned 0 after 0 usecs
[    0.801148] calling  clocksource_done_booting+0x0/0x53 @ 1
[    0.802101] initcall clocksource_done_booting+0x0/0x53 returned 0 after 0 usecs
[    0.803355] calling  init_pipe_fs+0x0/0x3d @ 1
[    0.804206] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[    0.805283] calling  eventpoll_init+0x0/0x10d @ 1
[    0.806120] initcall eventpoll_init+0x0/0x10d returned 0 after 0 usecs
[    0.807232] calling  anon_inode_init+0x0/0xfb @ 1
[    0.808135] initcall anon_inode_init+0x0/0xfb returned 0 after 0 usecs
[    0.809257] calling  aa_create_aafs+0x0/0xe6 @ 1
[    0.810062] initcall aa_create_aafs+0x0/0xe6 returned 0 after 0 usecs
[    0.811265] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    0.812059] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
[    0.813245] calling  acpi_event_init+0x0/0x6f @ 1
[    0.814112] initcall acpi_event_init+0x0/0x6f returned 0 after 0 usecs
[    0.815370] calling  pnp_system_init+0x0/0xf @ 1
[    0.816062] bus: 'pnp': add driver system
[    0.816777] initcall pnp_system_init+0x0/0xf returned 0 after 0 usecs
[    0.817890] calling  pnpacpi_init+0x0/0x88 @ 1
[    0.818650] pnp: PnP ACPI init
[    0.819184] device: 'pnp0': device_add
[    0.820071] PM: Adding info for No Bus:pnp0
[    0.820786] ACPI: bus type pnp registered
[    0.821542] pnp 00:00: [bus 00-ff]
[    0.822146] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.822852] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.823651] pnp 00:00: [io  0x0d00-0xffff window]
[    0.824056] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.824997] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[    0.825967] device: '00:00': device_add
[    0.826733] bus: 'pnp': add device 00:00
[    0.827425] PM: Adding info for pnp:00:00
[    0.828069] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.829456] pnp 00:01: [io  0x0070-0x0071]
[    0.830185] pnp 00:01: [irq 8]
[    0.830709] pnp 00:01: [io  0x0072-0x0077]
[    0.832071] device: '00:01': device_add
[    0.832800] bus: 'pnp': add device 00:01
[    0.833510] PM: Adding info for pnp:00:01
[    0.834226] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.835398] pnp 00:02: [io  0x0060]
[    0.836057] pnp 00:02: [io  0x0064]
[    0.836719] pnp 00:02: [irq 1]
[    0.837314] device: '00:02': device_add
[    0.838149] bus: 'pnp': add device 00:02
[    0.838899] PM: Adding info for pnp:00:02
[    0.839594] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.840112] pnp 00:03: [irq 12]
[    0.840674] device: '00:03': device_add
[    0.841434] bus: 'pnp': add device 00:03
[    0.842131] PM: Adding info for pnp:00:03
[    0.842825] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.844108] pnp 00:04: [io  0x03f2-0x03f5]
[    0.844823] pnp 00:04: [io  0x03f7]
[    0.845425] pnp 00:04: [irq 6]
[    0.845968] pnp 00:04: [dma 2]
[    0.846493] device: '00:04': device_add
[    0.847225] bus: 'pnp': add device 00:04
[    0.848078] PM: Adding info for pnp:00:04
[    0.848794] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.850019] pnp 00:05: [io  0x0378-0x037f]
[    0.850715] pnp 00:05: [irq 7]
[    0.851239] device: '00:05': device_add
[    0.852138] bus: 'pnp': add device 00:05
[    0.852846] PM: Adding info for pnp:00:05
[    0.853539] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.854747] pnp 00:06: [io  0x03f8-0x03ff]
[    0.855442] pnp 00:06: [irq 4]
[    0.856061] device: '00:06': device_add
[    0.856822] bus: 'pnp': add device 00:06
[    0.857620] PM: Adding info for pnp:00:06
[    0.858408] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.859638] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.860061] device: '00:07': device_add
[    0.860822] bus: 'pnp': add device 00:07
[    0.861532] PM: Adding info for pnp:00:07
[    0.862266] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.864268] pnp: PnP ACPI: found 8 devices
[    0.864962] ACPI: ACPI bus type pnp unregistered
[    0.865762] initcall pnpacpi_init+0x0/0x88 returned 0 after 46877 usecs
[    0.866929] calling  chr_dev_init+0x0/0xc9 @ 1
[    0.867724] device class 'mem': registering
[    0.868091] device: 'mem': device_add
[    0.868768] PM: Adding info for No Bus:mem
[    0.868823] device: 'null': device_add
[    0.869525] PM: Adding info for No Bus:null
[    0.869525] device: 'port': device_add
[    0.872087] PM: Adding info for No Bus:port
[    0.872840] device: 'zero': device_add
[    0.873507] PM: Adding info for No Bus:zero
[    0.873507] device: 'full': device_add
[    0.873507] PM: Adding info for No Bus:full
[    0.876074] device: 'random': device_add
[    0.876808] PM: Adding info for No Bus:random
[    0.876917] device: 'urandom': device_add
[    0.877734] PM: Adding info for No Bus:urandom
[    0.877734] device: 'kmsg': device_add
[    0.880096] PM: Adding info for No Bus:kmsg
[    0.880832] device: 'tty': device_add
[    0.881504] PM: Adding info for No Bus:tty
[    0.881504] device: 'console': device_add
[    0.881531] PM: Adding info for No Bus:console
[    0.884082] device: 'tty0': device_add
[    0.884770] PM: Adding info for No Bus:tty0
[    0.884902] device class 'vc': registering
[    0.885632] device: 'vcs': device_add
[    0.886285] PM: Adding info for No Bus:vcs
[    0.888098] device: 'vcsa': device_add
[    0.888777] PM: Adding info for No Bus:vcsa
[    0.888825] device: 'vcs1': device_add
[    0.889510] PM: Adding info for No Bus:vcs1
[    0.889510] device: 'vcsa1': device_add
[    0.892087] PM: Adding info for No Bus:vcsa1
[    0.892872] device: 'tty1': device_add
[    0.893546] PM: Adding info for No Bus:tty1
[    0.893546] device: 'tty2': device_add
[    0.893546] PM: Adding info for No Bus:tty2
[    0.896074] device: 'tty3': device_add
[    0.896740] PM: Adding info for No Bus:tty3
[    0.896814] device: 'tty4': device_add
[    0.897562] PM: Adding info for No Bus:tty4
[    0.897562] device: 'tty5': device_add
[    0.900090] PM: Adding info for No Bus:tty5
[    0.900870] device: 'tty6': device_add
[    0.901544] PM: Adding info for No Bus:tty6
[    0.901544] device: 'tty7': device_add
[    0.901544] PM: Adding info for No Bus:tty7
[    0.904103] device: 'tty8': device_add
[    0.904770] PM: Adding info for No Bus:tty8
[    0.904810] device: 'tty9': device_add
[    0.905501] PM: Adding info for No Bus:tty9
[    0.905501] device: 'tty10': device_add
[    0.908088] PM: Adding info for No Bus:tty10
[    0.908837] device: 'tty11': device_add
[    0.909539] PM: Adding info for No Bus:tty11
[    0.909539] device: 'tty12': device_add
[    0.909550] PM: Adding info for No Bus:tty12
[    0.912067] device: 'tty13': device_add
[    0.912761] PM: Adding info for No Bus:tty13
[    0.912850] device: 'tty14': device_add
[    0.913551] PM: Adding info for No Bus:tty14
[    0.913551] device: 'tty15': device_add
[    0.913551] PM: Adding info for No Bus:tty15
[    0.916075] device: 'tty16': device_add
[    0.916801] PM: Adding info for No Bus:tty16
[    0.916885] device: 'tty17': device_add
[    0.917667] PM: Adding info for No Bus:tty17
[    0.920075] device: 'tty18': device_add
[    0.920755] PM: Adding info for No Bus:tty18
[    0.920847] device: 'tty19': device_add
[    0.921548] PM: Adding info for No Bus:tty19
[    0.921548] device: 'tty20': device_add
[    0.924091] PM: Adding info for No Bus:tty20
[    0.924840] device: 'tty21': device_add
[    0.925544] PM: Adding info for No Bus:tty21
[    0.925544] device: 'tty22': device_add
[    0.925626] PM: Adding info for No Bus:tty22
[    0.928077] device: 'tty23': device_add
[    0.928769] PM: Adding info for No Bus:tty23
[    0.928874] device: 'tty24': device_add
[    0.929579] PM: Adding info for No Bus:tty24
[    0.929579] device: 'tty25': device_add
[    0.932090] PM: Adding info for No Bus:tty25
[    0.932837] device: 'tty26': device_add
[    0.933536] PM: Adding info for No Bus:tty26
[    0.933536] device: 'tty27': device_add
[    0.933551] PM: Adding info for No Bus:tty27
[    0.936077] device: 'tty28': device_add
[    0.936767] PM: Adding info for No Bus:tty28
[    0.936849] device: 'tty29': device_add
[    0.937581] PM: Adding info for No Bus:tty29
[    0.937581] device: 'tty30': device_add
[    0.940121] PM: Adding info for No Bus:tty30
[    0.940829] device: 'tty31': device_add
[    0.941528] PM: Adding info for No Bus:tty31
[    0.941528] device: 'tty32': device_add
[    0.941539] PM: Adding info for No Bus:tty32
[    0.944077] device: 'tty33': device_add
[    0.944763] PM: Adding info for No Bus:tty33
[    0.944839] device: 'tty34': device_add
[    0.945537] PM: Adding info for No Bus:tty34
[    0.945537] device: 'tty35': device_add
[    0.948074] PM: Adding info for No Bus:tty35
[    0.948821] device: 'tty36': device_add
[    0.949533] PM: Adding info for No Bus:tty36
[    0.949533] device: 'tty37': device_add
[    0.949559] PM: Adding info for No Bus:tty37
[    0.949559] device: 'tty38': device_add
[    0.952092] PM: Adding info for No Bus:tty38
[    0.952856] device: 'tty39': device_add
[    0.953562] PM: Adding info for No Bus:tty39
[    0.953562] device: 'tty40': device_add
[    0.953562] PM: Adding info for No Bus:tty40
[    0.956077] device: 'tty41': device_add
[    0.956783] PM: Adding info for No Bus:tty41
[    0.956884] device: 'tty42': device_add
[    0.957678] PM: Adding info for No Bus:tty42
[    0.960088] device: 'tty43': device_add
[    0.960770] PM: Adding info for No Bus:tty43
[    0.960901] device: 'tty44': device_add
[    0.961619] PM: Adding info for No Bus:tty44
[    0.961619] device: 'tty45': device_add
[    0.964087] PM: Adding info for No Bus:tty45
[    0.964834] device: 'tty46': device_add
[    0.965536] PM: Adding info for No Bus:tty46
[    0.965536] device: 'tty47': device_add
[    0.965545] PM: Adding info for No Bus:tty47
[    0.965545] device: 'tty48': device_add
[    0.968095] PM: Adding info for No Bus:tty48
[    0.968864] device: 'tty49': device_add
[    0.969569] PM: Adding info for No Bus:tty49
[    0.969569] device: 'tty50': device_add
[    0.969569] PM: Adding info for No Bus:tty50
[    0.972079] device: 'tty51': device_add
[    0.972782] PM: Adding info for No Bus:tty51
[    0.972852] device: 'tty52': device_add
[    0.973551] PM: Adding info for No Bus:tty52
[    0.973551] device: 'tty53': device_add
[    0.976127] PM: Adding info for No Bus:tty53
[    0.976866] device: 'tty54': device_add
[    0.977588] PM: Adding info for No Bus:tty54
[    0.977588] device: 'tty55': device_add
[    0.977697] PM: Adding info for No Bus:tty55
[    0.980104] device: 'tty56': device_add
[    0.980834] PM: Adding info for No Bus:tty56
[    0.980884] device: 'tty57': device_add
[    0.981580] PM: Adding info for No Bus:tty57
[    0.984079] device: 'tty58': device_add
[    0.984804] PM: Adding info for No Bus:tty58
[    0.984838] device: 'tty59': device_add
[    0.985541] PM: Adding info for No Bus:tty59
[    0.985541] device: 'tty60': device_add
[    0.988085] PM: Adding info for No Bus:tty60
[    0.988830] device: 'tty61': device_add
[    0.989530] PM: Adding info for No Bus:tty61
[    0.989530] device: 'tty62': device_add
[    0.989645] PM: Adding info for No Bus:tty62
[    0.992081] device: 'tty63': device_add
[    0.992775] PM: Adding info for No Bus:tty63
[    0.992937] initcall chr_dev_init+0x0/0xc9 returned 0 after 125007 usecs
[    0.994137] calling  firmware_class_init+0x0/0x14 @ 1
[    0.994985] device class 'firmware': registering
[    0.996091] initcall firmware_class_init+0x0/0x14 returned 0 after 3906 usecs
[    0.997304] calling  thermal_init+0x0/0x73 @ 1
[    0.998105] device class 'thermal': registering
[    0.998933] initcall thermal_init+0x0/0x73 returned 0 after 0 usecs
[    1.000066] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    1.001069] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
[    1.002370] calling  init_acpi_pm_clocksource+0x0/0x116 @ 1
[    1.038406] Switching to clocksource acpi_pm
[    1.039306] initcall init_acpi_pm_clocksource+0x0/0x116 returned 0 after 35213 usecs
[    1.040064] Switched to NOHz mode on CPU #0
[    1.039185] Switched to NOHz mode on CPU #1
[    1.040064] calling  ssb_modinit+0x0/0x5a @ 1
[    1.040064] bus: 'ssb': registered
[    1.040520] bus: 'pci': add driver b43-pci-bridge
[    1.041428] initcall ssb_modinit+0x0/0x5a returned 0 after 1550 usecs
[    1.042537] calling  pcibios_assign_resources+0x0/0x86 @ 1
[    1.043529] PCI: max bus depth: 0 pci_try_num: 1
[    1.044367] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    1.045307] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    1.046380] initcall pcibios_assign_resources+0x0/0x86 returned 0 after 2810 usecs
[    1.047756] calling  sysctl_core_init+0x0/0x2d @ 1
[    1.048715] initcall sysctl_core_init+0x0/0x2d returned 0 after 17 usecs
[    1.049847] calling  inet_init+0x0/0x1ca @ 1
[    1.050664] NET: Registered protocol family 2
[    1.051586] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    1.053218] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.054735] TCP bind hash table entries: 16384 (order: 7, 720896 bytes)
[    1.058026] TCP: Hash tables configured (established 16384 bind 16384)
[    1.059154] TCP reno registered
[    1.059702] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    1.060820] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    1.062099] initcall inet_init+0x0/0x1ca returned 0 after 11252 usecs
[    1.063206] calling  af_unix_init+0x0/0x4d @ 1
[    1.063991] NET: Registered protocol family 1
[    1.064801] initcall af_unix_init+0x0/0x4d returned 0 after 795 usecs
[    1.065882] calling  pci_apply_final_quirks+0x0/0x106 @ 1
[    1.066812] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x168
[    1.067938] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x40
[    1.069041] pci 0000:00:00.0: calling quirk_natoma+0x0/0x2b
[    1.069977] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.070995] pci 0000:00:00.0: calling quirk_passive_release+0x0/0x80
[    1.072161] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.073156] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x97
[    1.074254] pci 0000:00:00.0: calling pci_fixup_video+0x0/0x98
[    1.075270] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x168
[    1.076410] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x40
[    1.077598] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x2e
[    1.078681] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.079733] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x97
[    1.080878] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x98
[    1.081874] pci 0000:00:01.1: calling quirk_e100_interrupt+0x0/0x168
[    1.082953] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x40
[    1.084072] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x97
[    1.085254] pci 0000:00:01.1: calling pci_fixup_video+0x0/0x98
[    1.086263] pci 0000:00:01.3: calling quirk_e100_interrupt+0x0/0x168
[    1.087370] pci 0000:00:01.3: calling quirk_cardbus_legacy+0x0/0x40
[    1.088469] pci 0000:00:01.3: calling quirk_usb_early_handoff+0x0/0x97
[    1.089569] pci 0000:00:01.3: calling pci_fixup_video+0x0/0x98
[    1.090565] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x40
[    1.091649] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x97
[    1.092789] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x98
[    1.093778] pci 0000:00:02.0: Boot video device
[    1.094555] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x40
[    1.095640] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x97
[    1.096831] pci 0000:00:03.0: calling pci_fixup_video+0x0/0x98
[    1.097841] PCI: CLS 0 bytes, default 32
[    1.098512] initcall pci_apply_final_quirks+0x0/0x106 returned 0 after 30969 usecs
[    1.099826] calling  populate_rootfs+0x0/0xe8 @ 1
[    1.240878] initcall populate_rootfs+0x0/0xe8 returned 0 after 136909 usecs
[    1.242070] calling  pci_iommu_init+0x0/0x34 @ 1
[    1.242896] initcall pci_iommu_init+0x0/0x34 returned 0 after 9 usecs
[    1.244010] calling  irqfd_module_init+0x0/0x38 @ 1
[    1.245142] initcall irqfd_module_init+0x0/0x38 returned 0 after 247 usecs
[    1.246384] calling  svm_init+0x0/0x23 @ 1
[    1.247135] has_svm: not amd
[    1.247635] kvm: no hardware support
[    1.248300] initcall svm_init+0x0/0x23 returned -95 after 1142 usecs
[    1.249369] initcall svm_init+0x0/0x23 returned with error code -95 
[    1.250437] calling  i8259A_init_ops+0x0/0x1d @ 1
[    1.251287] initcall i8259A_init_ops+0x0/0x1d returned 0 after 8 usecs
[    1.252440] calling  sbf_init+0x0/0xf1 @ 1
[    1.253145] initcall sbf_init+0x0/0xf1 returned 0 after 5 usecs
[    1.254143] calling  init_tsc_clocksource+0x0/0x58 @ 1
[    1.255058] initcall init_tsc_clocksource+0x0/0x58 returned 0 after 19 usecs
[    1.256307] calling  add_rtc_cmos+0x0/0x7e @ 1
[    1.257159] initcall add_rtc_cmos+0x0/0x7e returned 0 after 80 usecs
[    1.258299] calling  i8237A_init_ops+0x0/0x11 @ 1
[    1.259112] initcall i8237A_init_ops+0x0/0x11 returned 0 after 10 usecs
[    1.260372] calling  cache_sysfs_init+0x0/0x4f @ 1
[    1.261469] initcall cache_sysfs_init+0x0/0x4f returned 0 after 271 usecs
[    1.262613] calling  msr_init+0x0/0x138 @ 1
[    1.263363] device class 'msr': registering
[    1.264179] device: 'msr0': device_add
[    1.265085] PM: Adding info for No Bus:msr0
[    1.265834] device: 'msr1': device_add
[    1.266670] PM: Adding info for No Bus:msr1
[    1.267450] initcall msr_init+0x0/0x138 returned 0 after 3997 usecs
[    1.268646] calling  cpuid_init+0x0/0x138 @ 1
[    1.269419] device class 'cpuid': registering
[    1.270173] device: 'cpu0': device_add
[    1.271000] PM: Adding info for No Bus:cpu0
[    1.271768] device: 'cpu1': device_add
[    1.272753] PM: Adding info for No Bus:cpu1
[    1.273494] initcall cpuid_init+0x0/0x138 returned 0 after 3982 usecs
[    1.274573] calling  ioapic_init_ops+0x0/0x11 @ 1
[    1.275427] initcall ioapic_init_ops+0x0/0x11 returned 0 after 10 usecs
[    1.276592] calling  add_pcspkr+0x0/0x43 @ 1
[    1.277328] Registering platform device 'pcspkr'. Parent at platform
[    1.278401] device: 'pcspkr': device_add
[    1.279098] bus: 'platform': add device pcspkr
[    1.279894] PM: Adding info for platform:pcspkr
[    1.280737] initcall add_pcspkr+0x0/0x43 returned 0 after 3330 usecs
[    1.281824] calling  pt_dump_init+0x0/0x70 @ 1
[    1.282606] initcall pt_dump_init+0x0/0x70 returned 0 after 23 usecs
[    1.283706] calling  aes_init+0x0/0xf @ 1
[    1.284894] initcall aes_init+0x0/0xf returned 0 after 443 usecs
[    1.285921] calling  init+0x0/0xf @ 1
[    1.286876] initcall init+0x0/0xf returned 0 after 319 usecs
[    1.287997] calling  crc32c_intel_mod_init+0x0/0x22 @ 1
[    1.288984] initcall crc32c_intel_mod_init+0x0/0x22 returned -19 after 5 usecs
[    1.290192] calling  scx200_init+0x0/0x25 @ 1
[    1.290943] scx200: NatSemi SCx200 Driver
[    1.291681] bus: 'pci': add driver scx200
[    1.292517] initcall scx200_init+0x0/0x25 returned 0 after 1534 usecs
[    1.293596] calling  proc_execdomains_init+0x0/0x27 @ 1
[    1.294493] initcall proc_execdomains_init+0x0/0x27 returned 0 after 13 usecs
[    1.295715] calling  ioresources_init+0x0/0x44 @ 1
[    1.296682] initcall ioresources_init+0x0/0x44 returned 0 after 15 usecs
[    1.297848] calling  uid_cache_init+0x0/0x83 @ 1
[    1.298687] initcall uid_cache_init+0x0/0x83 returned 0 after 19 usecs
[    1.299806] calling  init_posix_timers+0x0/0x1cb @ 1
[    1.300776] initcall init_posix_timers+0x0/0x1cb returned 0 after 8 usecs
[    1.301912] calling  init_posix_cpu_timers+0x0/0x9b @ 1
[    1.302801] initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 5 usecs
[    1.304072] calling  create_proc_profile+0x0/0x70 @ 1
[    1.304974] initcall create_proc_profile+0x0/0x70 returned 0 after 5 usecs
[    1.306131] calling  timekeeping_init_ops+0x0/0x11 @ 1
[    1.307032] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 7 usecs
[    1.308326] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    1.309228] Registering sysdev class 'clocksource'
[    1.310051] Registering sys device of class 'clocksource'
[    1.310980] Registering sys device 'clocksource0'
[    1.311810] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 2521 usecs
[    1.313159] calling  init_timer_list_procfs+0x0/0x30 @ 1
[    1.314074] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 11 usecs
[    1.315303] calling  alarmtimer_init+0x0/0x14e @ 1
[    1.316223] bus: 'platform': add driver alarmtimer
[    1.317066] Registering platform device 'alarmtimer'. Parent at platform
[    1.318326] device: 'alarmtimer': device_add
[    1.319081] bus: 'platform': add device alarmtimer
[    1.319919] PM: Adding info for platform:alarmtimer
[    1.320850] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer
[    1.322350] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer
[    1.323784] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer'
[    1.325090] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer
[    1.326444] initcall alarmtimer_init+0x0/0x14e returned 0 after 9982 usecs
[    1.327637] calling  init_tstats_procfs+0x0/0x30 @ 1
[    1.328625] initcall init_tstats_procfs+0x0/0x30 returned 0 after 10 usecs
[    1.329796] calling  lockdep_proc_init+0x0/0x8a @ 1
[    1.330643] initcall lockdep_proc_init+0x0/0x8a returned 0 after 20 usecs
[    1.331811] calling  futex_init+0x0/0x85 @ 1
[    1.332737] initcall futex_init+0x0/0x85 returned 0 after 67 usecs
[    1.333774] calling  proc_dma_init+0x0/0x27 @ 1
[    1.334558] initcall proc_dma_init+0x0/0x27 returned 0 after 11 usecs
[    1.335689] calling  kallsyms_init+0x0/0x2a @ 1
[    1.336584] initcall kallsyms_init+0x0/0x2a returned 0 after 11 usecs
[    1.337687] calling  snapshot_device_init+0x0/0xf @ 1
[    1.338550] device: 'snapshot': device_add
[    1.339448] PM: Adding info for No Bus:snapshot
[    1.340384] initcall snapshot_device_init+0x0/0xf returned 0 after 1797 usecs
[    1.341585] calling  crash_save_vmcoreinfo_init+0x0/0x47c @ 1
[    1.342594] initcall crash_save_vmcoreinfo_init+0x0/0x47c returned 0 after 36 usecs
[    1.343974] calling  crash_notes_memory_init+0x0/0x35 @ 1
[    1.345056] initcall crash_notes_memory_init+0x0/0x35 returned 0 after 15 usecs
[    1.346285] calling  backtrace_regression_test+0x0/0xe0 @ 1
[    1.347301] ====[ backtrace testing ]===========
[    1.348245] Testing a backtrace from process context.
[    1.349106] The following trace is a kernel self test and not a bug!
[    1.350176] Pid: 1, comm: swapper Not tainted 3.1.0-rc8+ #36
[    1.351145] Call Trace:
[    1.351603]  [<c10b4500>] backtrace_regression_test+0x30/0xe0
[    1.352698]  [<c10950f7>] ? ktime_get+0x67/0x100
[    1.353481]  [<c1e71229>] do_one_initcall+0x51/0x139
[    1.354433]  [<c10b44d0>] ? backtrace_test_irq_callback+0x20/0x20
[    1.355496]  [<c10b44d0>] ? backtrace_test_irq_callback+0x20/0x20
[    1.356605]  [<c1e713df>] kernel_init+0xa9/0x13f
[    1.357384]  [<c1e71336>] ? parse_early_options+0x25/0x25
[    1.358295]  [<c1a71f02>] kernel_thread_helper+0x6/0xd
[    1.359178] Testing a backtrace from irq context.
[    1.359978] The following trace is a kernel self test and not a bug!
[    1.361193] Pid: 3, comm: ksoftirqd/0 Not tainted 3.1.0-rc8+ #36
[    1.362210] Call Trace:
[    1.362633]  [<c10b44b8>] backtrace_test_irq_callback+0x8/0x20
[    1.363653]  [<c10726dd>] tasklet_action+0x9d/0xb0
[    1.364601]  [<c1072c33>] __do_softirq+0x93/0x150
[    1.365440]  [<c1072d65>] ? run_ksoftirqd+0x75/0x1c0
[    1.366324]  [<c1072dce>] run_ksoftirqd+0xde/0x1c0
[    1.367169]  [<c1072cf0>] ? __do_softirq+0x150/0x150
[    1.368081]  [<c108a19c>] kthread+0x7c/0x90
[    1.368829]  [<c108a120>] ? __init_kthread_worker+0x60/0x60
[    1.369765]  [<c1a71f02>] kernel_thread_helper+0x6/0xd
[    1.370647] Testing a saved backtrace.
[    1.371306] The following trace is a kernel self test and not a bug!
[    1.372518]  [<c103d44b>] save_stack_trace+0x2b/0x50
[    1.373381]  [<c10b4591>] backtrace_regression_test+0xc1/0xe0
[    1.374365]  [<c1e71229>] do_one_initcall+0x51/0x139
[    1.375242]  [<c1e713df>] kernel_init+0xa9/0x13f
[    1.376115]  [<c1a71f02>] kernel_thread_helper+0x6/0xd
[    1.377010]  [<ffffffff>] 0xffffffff
[    1.377776] ====[ end of backtrace testing ]====
[    1.378563] initcall backtrace_regression_test+0x0/0xe0 returned 0 after 30532 usecs
[    1.379891] calling  user_namespaces_init+0x0/0x32 @ 1
[    1.380929] initcall user_namespaces_init+0x0/0x32 returned 0 after 18 usecs
[    1.382167] calling  ikconfig_init+0x0/0x43 @ 1
[    1.382991] initcall ikconfig_init+0x0/0x43 returned 0 after 11 usecs
[    1.384151] calling  audit_init+0x0/0x140 @ 1
[    1.384917] audit: initializing netlink socket (disabled)
[    1.385877] type=2000 audit(1319449789.384:1): initialized
[    1.386809] initcall audit_init+0x0/0x140 returned 0 after 1848 usecs
[    1.387963] calling  rcu_torture_init+0x0/0x822 @ 1
[    1.389003] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
[    1.394822] initcall rcu_torture_init+0x0/0x822 returned 0 after 5724 usecs
[    1.396206] calling  utsname_sysctl_init+0x0/0x11 @ 1
[    1.397127] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 9 usecs
[    1.398324] calling  perf_event_sysfs_init+0x0/0x91 @ 1
[    1.399282] bus: 'event_source': registered
[    1.400020] device: 'breakpoint': device_add
[    1.400904] bus: 'event_source': add device breakpoint
[    1.401819] PM: Adding info for event_source:breakpoint
[    1.402724] device: 'software': device_add
[    1.403459] bus: 'event_source': add device software
[    1.404436] PM: Adding info for event_source:software
[    1.405321] initcall perf_event_sysfs_init+0x0/0x91 returned 0 after 5943 usecs
[    1.406547] calling  init_per_zone_wmark_min+0x0/0x80 @ 1
[    1.410748] initcall init_per_zone_wmark_min+0x0/0x80 returned 0 after 3095 usecs
[    1.412135] calling  kswapd_init+0x0/0x5d @ 1
[    1.413245] initcall kswapd_init+0x0/0x5d returned 0 after 324 usecs
[    1.414318] calling  setup_vmstat+0x0/0xf6 @ 1
[    1.415147] initcall setup_vmstat+0x0/0xf6 returned 0 after 50 usecs
[    1.416374] calling  mm_sysfs_init+0x0/0x22 @ 1
[    1.417212] initcall mm_sysfs_init+0x0/0x22 returned 0 after 13 usecs
[    1.418295] calling  proc_vmalloc_init+0x0/0x2a @ 1
[    1.419162] initcall proc_vmalloc_init+0x0/0x2a returned 0 after 14 usecs
[    1.420421] calling  init_emergency_pool+0x0/0x7e @ 1
[    1.421317] initcall init_emergency_pool+0x0/0x7e returned 0 after 22 usecs
[    1.422489] calling  procswaps_init+0x0/0x27 @ 1
[    1.423308] initcall procswaps_init+0x0/0x27 returned 0 after 10 usecs
[    1.424526] calling  slab_proc_init+0x0/0x2a @ 1
[    1.425362] initcall slab_proc_init+0x0/0x2a returned 0 after 11 usecs
[    1.426503] calling  slab_sysfs_init+0x0/0xdf @ 1
[    1.436850] initcall slab_sysfs_init+0x0/0xdf returned 0 after 9302 usecs
[    1.438090] calling  fcntl_init+0x0/0x2f @ 1
[    1.438907] initcall fcntl_init+0x0/0x2f returned 0 after 16 usecs
[    1.439969] calling  proc_filesystems_init+0x0/0x27 @ 1
[    1.441004] initcall proc_filesystems_init+0x0/0x27 returned 0 after 11 usecs
[    1.442219] calling  fsnotify_mark_init+0x0/0x46 @ 1
[    1.443292] initcall fsnotify_mark_init+0x0/0x46 returned 0 after 196 usecs
[    1.444613] calling  dnotify_init+0x0/0x7c @ 1
[    1.445405] initcall dnotify_init+0x0/0x7c returned 0 after 23 usecs
[    1.446475] calling  inotify_user_setup+0x0/0x78 @ 1
[    1.447382] initcall inotify_user_setup+0x0/0x78 returned 0 after 22 usecs
[    1.448671] calling  aio_setup+0x0/0x87 @ 1
[    1.449588] initcall aio_setup+0x0/0x87 returned 0 after 153 usecs
[    1.450626] calling  proc_locks_init+0x0/0x27 @ 1
[    1.451510] initcall proc_locks_init+0x0/0x27 returned 0 after 14 usecs
[    1.452813] calling  init_mbcache+0x0/0x11 @ 1
[    1.453622] initcall init_mbcache+0x0/0x11 returned 0 after 7 usecs
[    1.454731] calling  dquot_init+0x0/0x10f @ 1
[    1.455499] VFS: Disk quotas dquot_6.5.2
[    1.456437] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.457583] initcall dquot_init+0x0/0x10f returned 0 after 2033 usecs
[    1.458672] calling  proc_cmdline_init+0x0/0x27 @ 1
[    1.459553] initcall proc_cmdline_init+0x0/0x27 returned 0 after 11 usecs
[    1.460826] calling  proc_consoles_init+0x0/0x27 @ 1
[    1.461709] initcall proc_consoles_init+0x0/0x27 returned 0 after 11 usecs
[    1.462889] calling  proc_cpuinfo_init+0x0/0x27 @ 1
[    1.463746] initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 10 usecs
[    1.465020] calling  proc_devices_init+0x0/0x27 @ 1
[    1.465876] initcall proc_devices_init+0x0/0x27 returned 0 after 10 usecs
[    1.467034] calling  proc_interrupts_init+0x0/0x27 @ 1
[    1.467926] initcall proc_interrupts_init+0x0/0x27 returned 0 after 10 usecs
[    1.469367] calling  proc_loadavg_init+0x0/0x27 @ 1
[    1.470259] initcall proc_loadavg_init+0x0/0x27 returned 0 after 11 usecs
[    1.471468] calling  proc_meminfo_init+0x0/0x27 @ 1
[    1.472434] initcall proc_meminfo_init+0x0/0x27 returned 0 after 11 usecs
[    1.473582] calling  proc_stat_init+0x0/0x27 @ 1
[    1.474378] initcall proc_stat_init+0x0/0x27 returned 0 after 10 usecs
[    1.475504] calling  proc_uptime_init+0x0/0x27 @ 1
[    1.476416] initcall proc_uptime_init+0x0/0x27 returned 0 after 11 usecs
[    1.477577] calling  proc_version_init+0x0/0x27 @ 1
[    1.478450] initcall proc_version_init+0x0/0x27 returned 0 after 11 usecs
[    1.479622] calling  proc_softirqs_init+0x0/0x27 @ 1
[    1.480591] initcall proc_softirqs_init+0x0/0x27 returned 0 after 11 usecs
[    1.481783] calling  proc_kmsg_init+0x0/0x2a @ 1
[    1.482579] initcall proc_kmsg_init+0x0/0x2a returned 0 after 10 usecs
[    1.483714] calling  proc_page_init+0x0/0x4a @ 1
[    1.484630] initcall proc_page_init+0x0/0x4a returned 0 after 14 usecs
[    1.485725] calling  configfs_init+0x0/0xc8 @ 1
[    1.486673] initcall configfs_init+0x0/0xc8 returned 0 after 171 usecs
[    1.487798] calling  init_devpts_fs+0x0/0x3d @ 1
[    1.488899] initcall init_devpts_fs+0x0/0x3d returned 0 after 162 usecs
[    1.490029] calling  init_reiserfs_fs+0x0/0x64 @ 1
[    1.491052] initcall init_reiserfs_fs+0x0/0x64 returned 0 after 204 usecs
[    1.492364] calling  init_ext3_fs+0x0/0x6a @ 1
[    1.493461] initcall init_ext3_fs+0x0/0x6a returned 0 after 295 usecs
[    1.494546] calling  journal_init+0x0/0xd5 @ 1
[    1.495681] initcall journal_init+0x0/0xd5 returned 0 after 347 usecs
[    1.496930] calling  journal_init+0x0/0x62 @ 1
[    1.498026] initcall journal_init+0x0/0x62 returned 0 after 316 usecs
[    1.499243] calling  init_cramfs_fs+0x0/0x2a @ 1
[    1.500126] initcall init_cramfs_fs+0x0/0x2a returned 0 after 81 usecs
[    1.501263] calling  init_ramfs_fs+0x0/0xf @ 1
[    1.502029] initcall init_ramfs_fs+0x0/0xf returned 0 after 7 usecs
[    1.503098] calling  init_fat_fs+0x0/0x4c @ 1
[    1.504177] initcall init_fat_fs+0x0/0x4c returned 0 after 316 usecs
[    1.505264] calling  init_vfat_fs+0x0/0xf @ 1
[    1.506014] initcall init_vfat_fs+0x0/0xf returned 0 after 7 usecs
[    1.507076] calling  init_msdos_fs+0x0/0xf @ 1
[    1.507861] initcall init_msdos_fs+0x0/0xf returned 0 after 7 usecs
[    1.509048] calling  init_hfsplus_fs+0x0/0x56 @ 1
[    1.510012] initcall init_hfsplus_fs+0x0/0x56 returned 0 after 136 usecs
[    1.511159] calling  vxfs_init+0x0/0x56 @ 1
[    1.512110] initcall vxfs_init+0x0/0x56 returned 0 after 218 usecs
[    1.513206] calling  init_nls_cp437+0x0/0xf @ 1
[    1.514028] initcall init_nls_cp437+0x0/0xf returned 0 after 20 usecs
[    1.515136] calling  init_nls_cp737+0x0/0xf @ 1
[    1.515938] initcall init_nls_cp737+0x0/0xf returned 0 after 7 usecs
[    1.517147] calling  init_nls_cp850+0x0/0xf @ 1
[    1.517927] initcall init_nls_cp850+0x0/0xf returned 0 after 6 usecs
[    1.519006] calling  init_nls_cp857+0x0/0xf @ 1
[    1.519805] initcall init_nls_cp857+0x0/0xf returned 0 after 6 usecs
[    1.521038] calling  init_nls_cp860+0x0/0xf @ 1
[    1.521859] initcall init_nls_cp860+0x0/0xf returned 0 after 7 usecs
[    1.522986] calling  init_nls_cp861+0x0/0xf @ 1
[    1.523774] initcall init_nls_cp861+0x0/0xf returned 0 after 6 usecs
[    1.525000] calling  init_nls_cp865+0x0/0xf @ 1
[    1.525777] initcall init_nls_cp865+0x0/0xf returned 0 after 6 usecs
[    1.526852] calling  init_nls_cp932+0x0/0xf @ 1
[    1.527650] initcall init_nls_cp932+0x0/0xf returned 0 after 6 usecs
[    1.528963] calling  init_nls_euc_jp+0x0/0x39 @ 1
[    1.529806] initcall init_nls_euc_jp+0x0/0x39 returned 0 after 7 usecs
[    1.530909] calling  init_nls_cp936+0x0/0xf @ 1
[    1.531743] initcall init_nls_cp936+0x0/0xf returned 0 after 6 usecs
[    1.532946] calling  init_nls_cp950+0x0/0xf @ 1
[    1.533762] initcall init_nls_cp950+0x0/0xf returned 0 after 6 usecs
[    1.534825] calling  init_nls_ascii+0x0/0xf @ 1
[    1.535632] initcall init_nls_ascii+0x0/0xf returned 0 after 6 usecs
[    1.536847] calling  init_nls_iso8859_2+0x0/0xf @ 1
[    1.537726] initcall init_nls_iso8859_2+0x0/0xf returned 0 after 7 usecs
[    1.538908] calling  init_nls_iso8859_6+0x0/0xf @ 1
[    1.539759] initcall init_nls_iso8859_6+0x0/0xf returned 0 after 6 usecs
[    1.541020] calling  init_nls_cp1255+0x0/0xf @ 1
[    1.541823] initcall init_nls_cp1255+0x0/0xf returned 0 after 6 usecs
[    1.542917] calling  init_nls_iso8859_13+0x0/0xf @ 1
[    1.543791] initcall init_nls_iso8859_13+0x0/0xf returned 0 after 6 usecs
[    1.545071] calling  init_nls_iso8859_15+0x0/0xf @ 1
[    1.545923] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 6 usecs
[    1.547077] calling  init_nls_koi8_r+0x0/0xf @ 1
[    1.547890] initcall init_nls_koi8_r+0x0/0xf returned 0 after 6 usecs
[    1.549109] calling  init_nls_koi8_u+0x0/0xf @ 1
[    1.549931] initcall init_nls_koi8_u+0x0/0xf returned 0 after 6 usecs
[    1.551026] calling  init_nls_koi8_ru+0x0/0x39 @ 1
[    1.551895] initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 7 usecs
[    1.553147] calling  init_nls_utf8+0x0/0x21 @ 1
[    1.553921] initcall init_nls_utf8+0x0/0x21 returned 0 after 6 usecs
[    1.554995] calling  init_sysv_fs+0x0/0x43 @ 1
[    1.555923] initcall init_sysv_fs+0x0/0x43 returned 0 after 144 usecs
[    1.557151] calling  init_ntfs_fs+0x0/0x1c9 @ 1
[    1.557966] NTFS driver 2.1.30 [Flags: R/O].
[    1.559138] initcall init_ntfs_fs+0x0/0x1c9 returned 0 after 1146 usecs
[    1.560421] calling  init_ufs_fs+0x0/0x5a @ 1
[    1.561313] initcall init_ufs_fs+0x0/0x5a returned 0 after 136 usecs
[    1.562382] calling  logfs_init+0x0/0x58 @ 1
[    1.563308] initcall logfs_init+0x0/0x58 returned 0 after 169 usecs
[    1.564504] calling  init_romfs_fs+0x0/0x7c @ 1
[    1.565344] ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.566262] initcall init_romfs_fs+0x0/0x7c returned 0 after 898 usecs
[    1.567414] calling  init_adfs_fs+0x0/0x5a @ 1
[    1.568418] initcall init_adfs_fs+0x0/0x5a returned 0 after 141 usecs
[    1.569540] calling  fuse_init+0x0/0x123 @ 1
[    1.570269] fuse init (API version 7.17)
[    1.571245] device: 'fuse': device_add
[    1.572472] PM: Adding info for No Bus:fuse
[    1.573259] initcall fuse_init+0x0/0x123 returned 0 after 2915 usecs
[    1.574333] calling  init_udf_fs+0x0/0x5a @ 1
[    1.575242] initcall init_udf_fs+0x0/0x5a returned 0 after 138 usecs
[    1.576413] calling  init_omfs_fs+0x0/0xf @ 1
[    1.577213] initcall init_omfs_fs+0x0/0xf returned 0 after 8 usecs
[    1.578253] calling  init_jfs_fs+0x0/0x263 @ 1
[    1.579314] JFS: nTxBlock = 3589, nTxLock = 28717
[    1.585512] initcall init_jfs_fs+0x0/0x263 returned 0 after 6327 usecs
[    1.586607] calling  ocfs2_init+0x0/0x2b9 @ 1
[    1.587380] OCFS2 1.5.0
[    1.588771] initcall ocfs2_init+0x0/0x2b9 returned 0 after 1361 usecs
[    1.589912] calling  ocfs2_stack_glue_init+0x0/0x7f @ 1
[    1.590822] initcall ocfs2_stack_glue_init+0x0/0x7f returned 0 after 21 usecs
[    1.592147] calling  o2cb_stack_init+0x0/0xf @ 1
[    1.593069] ocfs2: Registered cluster interface o2cb
[    1.593916] initcall o2cb_stack_init+0x0/0xf returned 0 after 833 usecs
[    1.595043] calling  init_dlmfs_fs+0x0/0xd1 @ 1
[    1.595870] OCFS2 DLMFS 1.5.0
[    1.597068] OCFS2 User DLM kernel interface loaded
[    1.597932] initcall init_dlmfs_fs+0x0/0xd1 returned 0 after 2013 usecs
[    1.599160] calling  init_o2nm+0x0/0x98 @ 1
[    1.599929] OCFS2 Node Manager 1.5.0
[    1.601419] initcall init_o2nm+0x0/0x98 returned 0 after 1454 usecs
[    1.602529] calling  dlm_init+0x0/0x27f @ 1
[    1.603273] OCFS2 DLM 1.5.0
[    1.604005] initcall dlm_init+0x0/0x27f returned 0 after 717 usecs
[    1.605219] calling  key_proc_init+0x0/0x37 @ 1
[    1.606006] initcall key_proc_init+0x0/0x37 returned 0 after 12 usecs
[    1.607104] calling  init_sel_fs+0x0/0x86 @ 1
[    1.608481] initcall init_sel_fs+0x0/0x86 returned 0 after 612 usecs
[    1.609601] calling  selnl_init+0x0/0x59 @ 1
[    1.610377] initcall selnl_init+0x0/0x59 returned 0 after 44 usecs
[    1.611460] calling  sel_netif_init+0x0/0x6d @ 1
[    1.612376] initcall sel_netif_init+0x0/0x6d returned 0 after 14 usecs
[    1.613523] calling  sel_netnode_init+0x0/0x78 @ 1
[    1.614388] initcall sel_netnode_init+0x0/0x78 returned 0 after 6 usecs
[    1.615553] calling  sel_netport_init+0x0/0x78 @ 1
[    1.616484] initcall sel_netport_init+0x0/0x78 returned 0 after 6 usecs
[    1.617645] calling  aurule_init+0x0/0x46 @ 1
[    1.618527] initcall aurule_init+0x0/0x46 returned 0 after 5 usecs
[    1.619596] calling  crypto_wq_init+0x0/0x38 @ 1
[    1.620709] initcall crypto_wq_init+0x0/0x38 returned 0 after 188 usecs
[    1.621830] calling  crypto_algapi_init+0x0/0xc @ 1
[    1.622672] initcall crypto_algapi_init+0x0/0xc returned 0 after 11 usecs
[    1.623844] calling  skcipher_module_init+0x0/0x2e @ 1
[    1.624862] initcall skcipher_module_init+0x0/0x2e returned 0 after 5 usecs
[    1.626073] calling  chainiv_module_init+0x0/0xf @ 1
[    1.626941] initcall chainiv_module_init+0x0/0xf returned 0 after 13 usecs
[    1.628197] calling  eseqiv_module_init+0x0/0xf @ 1
[    1.629061] initcall eseqiv_module_init+0x0/0xf returned 0 after 7 usecs
[    1.630208] calling  seqiv_module_init+0x0/0xf @ 1
[    1.631077] initcall seqiv_module_init+0x0/0xf returned 0 after 8 usecs
[    1.632312] calling  hmac_module_init+0x0/0xf @ 1
[    1.633162] initcall hmac_module_init+0x0/0xf returned 0 after 8 usecs
[    1.634329] calling  vmac_module_init+0x0/0xf @ 1
[    1.635192] initcall vmac_module_init+0x0/0xf returned 0 after 8 usecs
[    1.636456] calling  crypto_null_mod_init+0x0/0x69 @ 1
[    1.638190] initcall crypto_null_mod_init+0x0/0x69 returned 0 after 794 usecs
[    1.639458] calling  md4_mod_init+0x0/0xf @ 1
[    1.641315] initcall md4_mod_init+0x0/0xf returned 0 after 969 usecs
[    1.642407] calling  md5_mod_init+0x0/0xf @ 1
[    1.643380] initcall md5_mod_init+0x0/0xf returned 0 after 202 usecs
[    1.644558] calling  rmd128_mod_init+0x0/0xf @ 1
[    1.645527] initcall rmd128_mod_init+0x0/0xf returned 0 after 178 usecs
[    1.646647] calling  rmd256_mod_init+0x0/0xf @ 1
[    1.647646] initcall rmd256_mod_init+0x0/0xf returned 0 after 178 usecs
[    1.649002] calling  rmd320_mod_init+0x0/0xf @ 1
[    1.649978] initcall rmd320_mod_init+0x0/0xf returned 0 after 179 usecs
[    1.651109] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    1.652507] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 455 usecs
[    1.653751] calling  sha256_generic_mod_init+0x0/0x33 @ 1
[    1.655044] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 368 usecs
[    1.656430] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    1.657365] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 8 usecs
[    1.658560] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    1.659482] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 7 usecs
[    1.660792] calling  crypto_module_init+0x0/0xf @ 1
[    1.661650] initcall crypto_module_init+0x0/0xf returned 0 after 7 usecs
[    1.662770] calling  cryptd_init+0x0/0xb5 @ 1
[    1.663567] initcall cryptd_init+0x0/0xb5 returned 0 after 16 usecs
[    1.664765] calling  des_generic_mod_init+0x0/0x33 @ 1
[    1.666033] initcall des_generic_mod_init+0x0/0x33 returned 0 after 344 usecs
[    1.667258] calling  fcrypt_mod_init+0x0/0xf @ 1
[    1.668290] initcall fcrypt_mod_init+0x0/0xf returned 0 after 179 usecs
[    1.669413] calling  twofish_mod_init+0x0/0xf @ 1
[    1.670403] initcall twofish_mod_init+0x0/0xf returned 0 after 183 usecs
[    1.671588] calling  serpent_mod_init+0x0/0x33 @ 1
[    1.674963] initcall serpent_mod_init+0x0/0x33 returned 0 after 2340 usecs
[    1.676272] calling  aes_init+0x0/0xf @ 1
[    1.677706] initcall aes_init+0x0/0xf returned 0 after 702 usecs
[    1.678877] calling  cast5_mod_init+0x0/0xf @ 1
[    1.679877] initcall cast5_mod_init+0x0/0xf returned 0 after 180 usecs
[    1.681110] calling  cast6_mod_init+0x0/0xf @ 1
[    1.682099] initcall cast6_mod_init+0x0/0xf returned 0 after 175 usecs
[    1.683251] calling  arc4_init+0x0/0xf @ 1
[    1.684241] initcall arc4_init+0x0/0xf returned 0 after 242 usecs
[    1.685335] calling  tea_mod_init+0x0/0x59 @ 1
[    1.686666] initcall tea_mod_init+0x0/0x59 returned 0 after 527 usecs
[    1.687820] calling  khazad_mod_init+0x0/0xf @ 1
[    1.689114] initcall khazad_mod_init+0x0/0xf returned 0 after 372 usecs
[    1.690280] calling  seed_init+0x0/0xf @ 1
[    1.692962] initcall seed_init+0x0/0xf returned 0 after 1901 usecs
[    1.694058] calling  salsa20_generic_mod_init+0x0/0xf @ 1
[    1.695199] initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 176 usecs
[    1.696595] calling  deflate_mod_init+0x0/0xf @ 1
[    1.697627] initcall deflate_mod_init+0x0/0xf returned 0 after 183 usecs
[    1.698808] calling  michael_mic_init+0x0/0xf @ 1
[    1.699830] initcall michael_mic_init+0x0/0xf returned 0 after 186 usecs
[    1.701118] calling  crc32c_mod_init+0x0/0xf @ 1
[    1.702087] initcall crc32c_mod_init+0x0/0xf returned 0 after 179 usecs
[    1.703228] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    1.704281] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 8 usecs
[    1.705622] calling  crypto_authenc_esn_module_init+0x0/0xf @ 1
[    1.706682] initcall crypto_authenc_esn_module_init+0x0/0xf returned 0 after 8 usecs
[    1.708005] calling  lzo_mod_init+0x0/0xf @ 1
[    1.709103] initcall lzo_mod_init+0x0/0xf returned 0 after 146 usecs
[    1.710182] calling  krng_mod_init+0x0/0xf @ 1
[    1.713490] initcall krng_mod_init+0x0/0xf returned 0 after 2475 usecs
[    1.714641] calling  ghash_mod_init+0x0/0xf @ 1
[    1.715647] initcall ghash_mod_init+0x0/0xf returned 0 after 176 usecs
[    1.716904] calling  af_alg_init+0x0/0x37 @ 1
[    1.717691] NET: Registered protocol family 38
[    1.718484] initcall af_alg_init+0x0/0x37 returned 0 after 782 usecs
[    1.719620] calling  algif_hash_init+0x0/0xf @ 1
[    1.720577] initcall algif_hash_init+0x0/0xf returned 0 after 42 usecs
[    1.721739] calling  algif_skcipher_init+0x0/0xf @ 1
[    1.722637] initcall algif_skcipher_init+0x0/0xf returned 0 after 7 usecs
[    1.723820] calling  proc_genhd_init+0x0/0x44 @ 1
[    1.724748] initcall proc_genhd_init+0x0/0x44 returned 0 after 18 usecs
[    1.725906] calling  bsg_init+0x0/0x119 @ 1
[    1.726664] device class 'bsg': registering
[    1.727425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.728826] initcall bsg_init+0x0/0x119 returned 0 after 2130 usecs
[    1.729938] calling  init_cgroup_blkio+0x0/0xf @ 1
[    1.730757] initcall init_cgroup_blkio+0x0/0xf returned 0 after 6 usecs
[    1.731933] calling  noop_init+0x0/0x11 @ 1
[    1.732789] io scheduler noop registered
[    1.733493] initcall noop_init+0x0/0x11 returned 0 after 700 usecs
[    1.734545] calling  deadline_init+0x0/0x11 @ 1
[    1.735358] io scheduler deadline registered (default)
[    1.736349] initcall deadline_init+0x0/0x11 returned 0 after 970 usecs
[    1.737497] calling  test_kstrtox_init+0x0/0xbea @ 1
[    1.738553] initcall test_kstrtox_init+0x0/0xbea returned -22 after 88 usecs
[    1.739761] initcall test_kstrtox_init+0x0/0xbea returned with error code -22 
[    1.741142] calling  btree_module_init+0x0/0x2f @ 1
[    1.742038] initcall btree_module_init+0x0/0x2f returned 0 after 22 usecs
[    1.743230] calling  libcrc32c_mod_init+0x0/0x25 @ 1
[    1.744163] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 16 usecs
[    1.745345] calling  percpu_counter_startup+0x0/0x2e @ 1
[    1.746254] initcall percpu_counter_startup+0x0/0x2e returned 0 after 9 usecs
[    1.747488] calling  audit_classes_init+0x0/0x4f @ 1
[    1.748460] initcall audit_classes_init+0x0/0x4f returned 0 after 8 usecs
[    1.749667] calling  err_inject_init+0x0/0x20 @ 1
[    1.750524] initcall err_inject_init+0x0/0x20 returned 0 after 8 usecs
[    1.751686] calling  bt8xxgpio_init+0x0/0x16 @ 1
[    1.752611] bus: 'pci': add driver bt8xxgpio
[    1.753386] initcall bt8xxgpio_init+0x0/0x16 returned 0 after 758 usecs
[    1.754511] calling  it8761e_gpio_init+0x0/0x19a @ 1
[    1.755462] initcall it8761e_gpio_init+0x0/0x19a returned -19 after 75 usecs
[    1.756784] calling  lnw_gpio_init+0x0/0x3a @ 1
[    1.757555] bus: 'pci': add driver langwell_gpio
[    1.758366] bus: 'platform': add driver wp_gpio
[    1.759196] initcall lnw_gpio_init+0x0/0x3a returned 0 after 1603 usecs
[    1.760442] calling  ioh_gpio_pci_init+0x0/0x16 @ 1
[    1.761267] bus: 'pci': add driver ml_ioh_gpio
[    1.762052] initcall ioh_gpio_pci_init+0x0/0x16 returned 0 after 767 usecs
[    1.763256] calling  sch_gpio_init+0x0/0xf @ 1
[    1.764022] bus: 'platform': add driver sch_gpio
[    1.764984] initcall sch_gpio_init+0x0/0xf returned 0 after 936 usecs
[    1.766127] calling  pci_proc_init+0x0/0x64 @ 1
[    1.767005] initcall pci_proc_init+0x0/0x64 returned 0 after 58 usecs
[    1.768168] calling  pcie_portdrv_init+0x0/0x6f @ 1
[    1.769174] bus: 'pci_express': registered
[    1.769866] bus: 'pci': add driver pcieport
[    1.770618] initcall pcie_portdrv_init+0x0/0x6f returned 0 after 1439 usecs
[    1.771853] calling  aer_service_init+0x0/0xa @ 1
[    1.772807] initcall aer_service_init+0x0/0xa returned -6 after 5 usecs
[    1.773938] initcall aer_service_init+0x0/0xa returned with error code -6 
[    1.775106] calling  pcie_pme_service_init+0x0/0xf @ 1
[    1.775984] bus: 'pci_express': add driver pcie_pme
[    1.776963] initcall pcie_pme_service_init+0x0/0xf returned 0 after 954 usecs
[    1.778156] calling  ioapic_init+0x0/0x16 @ 1
[    1.778907] bus: 'pci': add driver ioapic
[    1.779641] initcall ioapic_init+0x0/0x16 returned 0 after 716 usecs
[    1.780866] calling  pci_hotplug_init+0x0/0x1e @ 1
[    1.781679] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.782622] initcall pci_hotplug_init+0x0/0x1e returned 0 after 920 usecs
[    1.783805] calling  ibmphp_init+0x0/0x174 @ 1
[    1.784686] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[    1.786401] initcall ibmphp_init+0x0/0x174 returned -19 after 1676 usecs
[    1.787567] calling  shpcd_init+0x0/0xd8 @ 1
[    1.788411] bus: 'pci': add driver shpchp
[    1.789162] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.790356] initcall shpcd_init+0x0/0xd8 returned 0 after 1903 usecs
[    1.791468] calling  pci_stub_init+0x0/0x162 @ 1
[    1.792327] bus: 'pci': add driver pci-stub
[    1.793108] initcall pci_stub_init+0x0/0x162 returned 0 after 762 usecs
[    1.794311] calling  apple_bl_init+0x0/0xf @ 1
[    1.795092] bus: 'acpi': add driver Apple backlight
[    1.795998] initcall apple_bl_init+0x0/0xf returned 0 after 888 usecs
[    1.797232] calling  acpi_reserve_resources+0x0/0xc8 @ 1
[    1.798188] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 10 usecs
[    1.799537] calling  irqrouter_init_ops+0x0/0x23 @ 1
[    1.800515] initcall irqrouter_init_ops+0x0/0x23 returned 0 after 7 usecs
[    1.801710] calling  acpi_pci_slot_init+0x0/0x1b @ 1
[    1.802651] pci_bus 0000:00: dev 01, created physical slot 1
[    1.803686] pci_bus 0000:00: dev 02, created physical slot 2
[    1.804800] pci_bus 0000:00: dev 03, created physical slot 3
[    1.805777] pci_bus 0000:00: dev 04, created physical slot 4
[    1.806753] pci_bus 0000:00: dev 05, created physical slot 5
[    1.807770] pci_bus 0000:00: dev 06, created physical slot 6
[    1.808896] pci_bus 0000:00: dev 07, created physical slot 7
[    1.809900] pci_bus 0000:00: dev 08, created physical slot 8
[    1.810886] pci_bus 0000:00: dev 09, created physical slot 9
[    1.811923] pci_bus 0000:00: dev 0a, created physical slot 10
[    1.813048] pci_bus 0000:00: dev 0b, created physical slot 11
[    1.814050] pci_bus 0000:00: dev 0c, created physical slot 12
[    1.815057] pci_bus 0000:00: dev 0d, created physical slot 13
[    1.816105] pci_bus 0000:00: dev 0e, created physical slot 14
[    1.817169] pci_bus 0000:00: dev 0f, created physical slot 15
[    1.818207] pci_bus 0000:00: dev 10, created physical slot 16
[    1.819223] pci_bus 0000:00: dev 11, created physical slot 17
[    1.820341] pci_bus 0000:00: dev 12, created physical slot 18
[    1.821363] pci_bus 0000:00: dev 13, created physical slot 19
[    1.822350] pci_bus 0000:00: dev 14, created physical slot 20
[    1.823366] pci_bus 0000:00: dev 15, created physical slot 21
[    1.824460] pci_bus 0000:00: dev 16, created physical slot 22
[    1.825485] pci_bus 0000:00: dev 17, created physical slot 23
[    1.826476] pci_bus 0000:00: dev 18, created physical slot 24
[    1.827496] pci_bus 0000:00: dev 19, created physical slot 25
[    1.828697] pci_bus 0000:00: dev 1a, created physical slot 26
[    1.829717] pci_bus 0000:00: dev 1b, created physical slot 27
[    1.830762] pci_bus 0000:00: dev 1c, created physical slot 28
[    1.831820] pci_bus 0000:00: dev 1d, created physical slot 29
[    1.832946] pci_bus 0000:00: dev 1e, created physical slot 30
[    1.833989] pci_bus 0000:00: dev 1f, created physical slot 31
[    1.835288] initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 31929 usecs
[    1.836634] calling  acpi_processor_init+0x0/0xba @ 1
[    1.837558] ACPI: acpi_idle registered with cpuidle
[    1.838429] bus: 'acpi': add driver processor
[    1.839208] bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor
[    1.840776] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00
[    1.842216] device: 'cooling_device0': device_add
[    1.843066] PM: Adding info for No Bus:cooling_device0
[    1.844028] driver: 'LNXCPU:00': driver_bound: bound to device 'processor'
[    1.845304] bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor
[    1.846564] bus: 'acpi': driver_probe_device: matched device LNXCPU:01 with driver processor
[    1.848043] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:01
[    1.849622] device: 'cooling_device1': device_add
[    1.850458] PM: Adding info for No Bus:cooling_device1
[    1.851392] driver: 'LNXCPU:01': driver_bound: bound to device 'processor'
[    1.852668] bus: 'acpi': really_probe: bound device LNXCPU:01 to driver processor
[    1.854043] initcall acpi_processor_init+0x0/0xba returned 0 after 16115 usecs
[    1.855277] calling  acpi_container_init+0x0/0x3f @ 1
[    1.856234] bus: 'acpi': add driver container
[    1.858971] initcall acpi_container_init+0x0/0x3f returned 0 after 2673 usecs
[    1.860313] calling  acpi_battery_init+0x0/0x13 @ 1
[    1.861238] initcall acpi_battery_init+0x0/0x13 returned 0 after 40 usecs
[    1.862379] calling  acpi_smb_hc_init+0x0/0x15 @ 1
[    1.863215] bus: 'acpi': add driver smbus_hc
[    1.864021] initcall acpi_smb_hc_init+0x0/0x15 returned 0 after 787 usecs
[    1.864640] calling  1_acpi_battery_init_async+0x0/0x34 @ 5
[    1.864698] bus: 'acpi': add driver battery
[    1.864819] initcall 1_acpi_battery_init_async+0x0/0x34 returned 0 after 161 usecs
[    1.868476] calling  acpi_sbs_init+0x0/0x46 @ 1
[    1.869322] bus: 'acpi': add driver sbs
[    1.870029] initcall acpi_sbs_init+0x0/0x46 returned 0 after 714 usecs
[    1.871151] calling  acpi_hed_init+0x0/0x25 @ 1
[    1.871971] bus: 'acpi': add driver hardware_error_device
[    1.873045] initcall acpi_hed_init+0x0/0x25 returned 0 after 1046 usecs
[    1.874187] calling  acpi_custom_method_init+0x0/0x39 @ 1
[    1.875149] initcall acpi_custom_method_init+0x0/0x39 returned 0 after 27 usecs
[    1.876525] calling  virtio_pci_init+0x0/0x16 @ 1
[    1.877328] bus: 'pci': add driver virtio-pci
[    1.878106] initcall virtio_pci_init+0x0/0x16 returned 0 after 761 usecs
[    1.879252] calling  init+0x0/0xf @ 1
[    1.879897] bus: 'virtio': add driver virtio_balloon
[    1.880893] initcall init+0x0/0xf returned 0 after 970 usecs
[    1.881845] calling  regulator_userspace_consumer_init+0x0/0xf @ 1
[    1.882898] bus: 'platform': add driver reg-userspace-consumer
[    1.883942] initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 1020 usecs
[    1.885503] calling  pty_init+0x0/0x11 @ 1
[    1.886283] device: 'ptyp0': device_add
[    1.887164] PM: Adding info for No Bus:ptyp0
[    1.887923] device: 'ptyp1': device_add
[    1.888961] PM: Adding info for No Bus:ptyp1
[    1.889753] device: 'ptyp2': device_add
[    1.890572] PM: Adding info for No Bus:ptyp2
[    1.891373] device: 'ptyp3': device_add
[    1.892243] PM: Adding info for No Bus:ptyp3
[    1.893016] device: 'ptyp4': device_add
[    1.893776] PM: Adding info for No Bus:ptyp4
[    1.894520] device: 'ptyp5': device_add
[    1.895263] PM: Adding info for No Bus:ptyp5
[    1.896016] device: 'ptyp6': device_add
[    1.896884] PM: Adding info for No Bus:ptyp6
[    1.897639] device: 'ptyp7': device_add
[    1.898395] PM: Adding info for No Bus:ptyp7
[    1.899169] device: 'ptyp8': device_add
[    1.899916] PM: Adding info for No Bus:ptyp8
[    1.900765] device: 'ptyp9': device_add
[    1.901528] PM: Adding info for No Bus:ptyp9
[    1.902277] device: 'ptypa': device_add
[    1.903017] PM: Adding info for No Bus:ptypa
[    1.903777] device: 'ptypb': device_add
[    1.904630] PM: Adding info for No Bus:ptypb
[    1.905400] device: 'ptypc': device_add
[    1.906131] PM: Adding info for No Bus:ptypc
[    1.906883] device: 'ptypd': device_add
[    1.907629] PM: Adding info for No Bus:ptypd
[    1.908488] device: 'ptype': device_add
[    1.909233] PM: Adding info for No Bus:ptype
[    1.909984] device: 'ptypf': device_add
[    1.910725] PM: Adding info for No Bus:ptypf
[    1.911517] device: 'ptyq0': device_add
[    1.912371] PM: Adding info for No Bus:ptyq0
[    1.913160] device: 'ptyq1': device_add
[    1.913904] PM: Adding info for No Bus:ptyq1
[    1.914648] device: 'ptyq2': device_add
[    1.915406] PM: Adding info for No Bus:ptyq2
[    1.916231] device: 'ptyq3': device_add
[    1.916988] PM: Adding info for No Bus:ptyq3
[    1.917728] device: 'ptyq4': device_add
[    1.918597] PM: Adding info for No Bus:ptyq4
[    1.919370] device: 'ptyq5': device_add
[    1.920153] PM: Adding info for No Bus:ptyq5
[    1.920931] device: 'ptyq6': device_add
[    1.921674] PM: Adding info for No Bus:ptyq6
[    1.922417] device: 'ptyq7': device_add
[    1.923158] PM: Adding info for No Bus:ptyq7
[    1.923910] device: 'ptyq8': device_add
[    1.924753] PM: Adding info for No Bus:ptyq8
[    1.925514] device: 'ptyq9': device_add
[    1.926271] PM: Adding info for No Bus:ptyq9
[    1.927032] device: 'ptyqa': device_add
[    1.927778] PM: Adding info for No Bus:ptyqa
[    1.928645] device: 'ptyqb': device_add
[    1.929411] PM: Adding info for No Bus:ptyqb
[    1.930193] device: 'ptyqc': device_add
[    1.930925] PM: Adding info for No Bus:ptyqc
[    1.931713] device: 'ptyqd': device_add
[    1.932600] PM: Adding info for No Bus:ptyqd
[    1.933412] device: 'ptyqe': device_add
[    1.934146] PM: Adding info for No Bus:ptyqe
[    1.934897] device: 'ptyqf': device_add
[    1.935636] PM: Adding info for No Bus:ptyqf
[    1.936510] device: 'ptyr0': device_add
[    1.937240] PM: Adding info for No Bus:ptyr0
[    1.937980] device: 'ptyr1': device_add
[    1.938700] PM: Adding info for No Bus:ptyr1
[    1.939478] device: 'ptyr2': device_add
[    1.940274] PM: Adding info for No Bus:ptyr2
[    1.941041] device: 'ptyr3': device_add
[    1.941770] PM: Adding info for No Bus:ptyr3
[    1.942513] device: 'ptyr4': device_add
[    1.943254] PM: Adding info for No Bus:ptyr4
[    1.944006] device: 'ptyr5': device_add
[    1.944884] PM: Adding info for No Bus:ptyr5
[    1.945666] device: 'ptyr6': device_add
[    1.946426] PM: Adding info for No Bus:ptyr6
[    1.947197] device: 'ptyr7': device_add
[    1.947924] PM: Adding info for No Bus:ptyr7
[    1.948772] device: 'ptyr8': device_add
[    1.949668] PM: Adding info for No Bus:ptyr8
[    1.950416] device: 'ptyr9': device_add
[    1.951171] PM: Adding info for No Bus:ptyr9
[    1.951967] device: 'ptyra': device_add
[    1.953742] PM: Adding info for No Bus:ptyra
[    1.954483] device: 'ptyrb': device_add
[    1.955226] PM: Adding info for No Bus:ptyrb
[    1.955978] device: 'ptyrc': device_add
[    1.956858] PM: Adding info for No Bus:ptyrc
[    1.957643] device: 'ptyrd': device_add
[    1.958405] PM: Adding info for No Bus:ptyrd
[    1.959205] device: 'ptyre': device_add
[    1.959951] PM: Adding info for No Bus:ptyre
[    1.960852] device: 'ptyrf': device_add
[    1.961580] PM: Adding info for No Bus:ptyrf
[    1.962321] device: 'ptys0': device_add
[    1.963098] PM: Adding info for No Bus:ptys0
[    1.963858] device: 'ptys1': device_add
[    1.964737] PM: Adding info for No Bus:ptys1
[    1.965482] device: 'ptys2': device_add
[    1.966203] PM: Adding info for No Bus:ptys2
[    1.966957] device: 'ptys3': device_add
[    1.967709] PM: Adding info for No Bus:ptys3
[    1.968574] device: 'ptys4': device_add
[    1.969338] PM: Adding info for No Bus:ptys4
[    1.970123] device: 'ptys5': device_add
[    1.970862] PM: Adding info for No Bus:ptys5
[    1.971646] device: 'ptys6': device_add
[    1.972476] PM: Adding info for No Bus:ptys6
[    1.973255] device: 'ptys7': device_add
[    1.973974] PM: Adding info for No Bus:ptys7
[    1.974714] device: 'ptys8': device_add
[    1.975475] PM: Adding info for No Bus:ptys8
[    1.976329] device: 'ptys9': device_add
[    1.977083] PM: Adding info for No Bus:ptys9
[    1.977831] device: 'ptysa': device_add
[    1.978562] PM: Adding info for No Bus:ptysa
[    1.979327] device: 'ptysb': device_add
[    1.980246] PM: Adding info for No Bus:ptysb
[    1.981009] device: 'ptysc': device_add
[    1.981727] PM: Adding info for No Bus:ptysc
[    1.982467] device: 'ptysd': device_add
[    1.983218] PM: Adding info for No Bus:ptysd
[    1.984043] device: 'ptyse': device_add
[    1.984913] PM: Adding info for No Bus:ptyse
[    1.985693] device: 'ptysf': device_add
[    1.986467] PM: Adding info for No Bus:ptysf
[    1.987239] device: 'ptyt0': device_add
[    1.987992] PM: Adding info for No Bus:ptyt0
[    1.988879] device: 'ptyt1': device_add
[    1.989597] PM: Adding info for No Bus:ptyt1
[    1.990338] device: 'ptyt2': device_add
[    1.991077] PM: Adding info for No Bus:ptyt2
[    1.991864] device: 'ptyt3': device_add
[    1.992686] PM: Adding info for No Bus:ptyt3
[    1.993463] device: 'ptyt4': device_add
[    1.994227] PM: Adding info for No Bus:ptyt4
[    1.994982] device: 'ptyt5': device_add
[    1.995724] PM: Adding info for No Bus:ptyt5
[    1.996606] device: 'ptyt6': device_add
[    1.997371] PM: Adding info for No Bus:ptyt6
[    1.998144] device: 'ptyt7': device_add
[    1.998917] PM: Adding info for No Bus:ptyt7
[    1.999683] device: 'ptyt8': device_add
[    2.000542] PM: Adding info for No Bus:ptyt8
[    2.001332] device: 'ptyt9': device_add
[    2.002054] PM: Adding info for No Bus:ptyt9
[    2.002839] device: 'ptyta': device_add
[    2.003591] PM: Adding info for No Bus:ptyta
[    2.004442] device: 'ptytb': device_add
[    2.005196] PM: Adding info for No Bus:ptytb
[    2.005974] device: 'ptytc': device_add
[    2.006695] PM: Adding info for No Bus:ptytc
[    2.007467] device: 'ptytd': device_add
[    2.008272] PM: Adding info for No Bus:ptytd
[    2.009139] device: 'ptyte': device_add
[    2.009929] PM: Adding info for No Bus:ptyte
[    2.010678] device: 'ptytf': device_add
[    2.011453] PM: Adding info for No Bus:ptytf
[    2.012291] device: 'ptyu0': device_add
[    2.013059] PM: Adding info for No Bus:ptyu0
[    2.013797] device: 'ptyu1': device_add
[    2.014517] PM: Adding info for No Bus:ptyu1
[    2.015277] device: 'ptyu2': device_add
[    2.016030] PM: Adding info for No Bus:ptyu2
[    2.016909] device: 'ptyu3': device_add
[    2.017662] PM: Adding info for No Bus:ptyu3
[    2.018431] device: 'ptyu4': device_add
[    2.019173] PM: Adding info for No Bus:ptyu4
[    2.019931] device: 'ptyu5': device_add
[    2.020778] PM: Adding info for No Bus:ptyu5
[    2.021539] device: 'ptyu6': device_add
[    2.022272] PM: Adding info for No Bus:ptyu6
[    2.023041] device: 'ptyu7': device_add
[    2.023807] PM: Adding info for No Bus:ptyu7
[    2.024666] device: 'ptyu8': device_add
[    2.025419] PM: Adding info for No Bus:ptyu8
[    2.026159] device: 'ptyu9': device_add
[    2.026892] PM: Adding info for No Bus:ptyu9
[    2.027652] device: 'ptyua': device_add
[    2.028490] PM: Adding info for No Bus:ptyua
[    2.029265] device: 'ptyub': device_add
[    2.030045] PM: Adding info for No Bus:ptyub
[    2.030819] device: 'ptyuc': device_add
[    2.031593] PM: Adding info for No Bus:ptyuc
[    2.032432] device: 'ptyud': device_add
[    2.033187] PM: Adding info for No Bus:ptyud
[    2.033990] device: 'ptyue': device_add
[    2.034749] PM: Adding info for No Bus:ptyue
[    2.035527] device: 'ptyuf': device_add
[    2.036358] PM: Adding info for No Bus:ptyuf
[    2.037135] device: 'ptyv0': device_add
[    2.037883] PM: Adding info for No Bus:ptyv0
[    2.038623] device: 'ptyv1': device_add
[    2.039457] PM: Adding info for No Bus:ptyv1
[    2.040380] device: 'ptyv2': device_add
[    2.041136] PM: Adding info for No Bus:ptyv2
[    2.041874] device: 'ptyv3': device_add
[    2.042596] PM: Adding info for No Bus:ptyv3
[    2.043366] device: 'ptyv4': device_add
[    2.044155] PM: Adding info for No Bus:ptyv4
[    2.044932] device: 'ptyv5': device_add
[    2.045680] PM: Adding info for No Bus:ptyv5
[    2.046421] device: 'ptyv6': device_add
[    2.047163] PM: Adding info for No Bus:ptyv6
[    2.047923] device: 'ptyv7': device_add
[    2.048732] PM: Adding info for No Bus:ptyv7
[    2.049473] device: 'ptyv8': device_add
[    2.050197] PM: Adding info for No Bus:ptyv8
[    2.050951] device: 'ptyv9': device_add
[    2.051700] PM: Adding info for No Bus:ptyv9
[    2.052543] device: 'ptyva': device_add
[    2.053302] PM: Adding info for No Bus:ptyva
[    2.054075] device: 'ptyvb': device_add
[    2.054798] PM: Adding info for No Bus:ptyvb
[    2.055570] device: 'ptyvc': device_add
[    2.056405] PM: Adding info for No Bus:ptyvc
[    2.057196] device: 'ptyvd': device_add
[    2.057962] PM: Adding info for No Bus:ptyvd
[    2.058779] device: 'ptyve': device_add
[    2.059556] PM: Adding info for No Bus:ptyve
[    2.060429] device: 'ptyvf': device_add
[    2.061186] PM: Adding info for No Bus:ptyvf
[    2.061965] device: 'ptyw0': device_add
[    2.062702] PM: Adding info for No Bus:ptyw0
[    2.063475] device: 'ptyw1': device_add
[    2.064273] PM: Adding info for No Bus:ptyw1
[    2.065051] device: 'ptyw2': device_add
[    2.065819] PM: Adding info for No Bus:ptyw2
[    2.066581] device: 'ptyw3': device_add
[    2.067326] PM: Adding info for No Bus:ptyw3
[    2.068126] device: 'ptyw4': device_add
[    2.068895] PM: Adding info for No Bus:ptyw4
[    2.069717] device: 'ptyw5': device_add
[    2.070546] PM: Adding info for No Bus:ptyw5
[    2.071318] device: 'ptyw6': device_add
[    2.072147] PM: Adding info for No Bus:ptyw6
[    2.072928] device: 'ptyw7': device_add
[    2.073682] PM: Adding info for No Bus:ptyw7
[    2.074421] device: 'ptyw8': device_add
[    2.075170] PM: Adding info for No Bus:ptyw8
[    2.075922] device: 'ptyw9': device_add
[    2.076769] PM: Adding info for No Bus:ptyw9
[    2.077513] device: 'ptywa': device_add
[    2.078239] PM: Adding info for No Bus:ptywa
[    2.078994] device: 'ptywb': device_add
[    2.079747] PM: Adding info for No Bus:ptywb
[    2.080613] device: 'ptywc': device_add
[    2.081399] PM: Adding info for No Bus:ptywc
[    2.082150] device: 'ptywd': device_add
[    2.082884] PM: Adding info for No Bus:ptywd
[    2.083683] device: 'ptywe': device_add
[    2.084536] PM: Adding info for No Bus:ptywe
[    2.085313] device: 'ptywf': device_add
[    2.086079] PM: Adding info for No Bus:ptywf
[    2.086862] device: 'ptyx0': device_add
[    2.087617] PM: Adding info for No Bus:ptyx0
[    2.088485] device: 'ptyx1': device_add
[    2.089243] PM: Adding info for No Bus:ptyx1
[    2.090020] device: 'ptyx2': device_add
[    2.090747] PM: Adding info for No Bus:ptyx2
[    2.091538] device: 'ptyx3': device_add
[    2.092381] PM: Adding info for No Bus:ptyx3
[    2.093173] device: 'ptyx4': device_add
[    2.093910] PM: Adding info for No Bus:ptyx4
[    2.094651] device: 'ptyx5': device_add
[    2.095426] PM: Adding info for No Bus:ptyx5
[    2.096247] device: 'ptyx6': device_add
[    2.097006] PM: Adding info for No Bus:ptyx6
[    2.097759] device: 'ptyx7': device_add
[    2.098488] PM: Adding info for No Bus:ptyx7
[    2.099373] device: 'ptyx8': device_add
[    2.100166] PM: Adding info for No Bus:ptyx8
[    2.100921] device: 'ptyx9': device_add
[    2.101649] PM: Adding info for No Bus:ptyx9
[    2.102389] device: 'ptyxa': device_add
[    2.103146] PM: Adding info for No Bus:ptyxa
[    2.103900] device: 'ptyxb': device_add
[    2.104753] PM: Adding info for No Bus:ptyxb
[    2.105495] device: 'ptyxc': device_add
[    2.106259] PM: Adding info for No Bus:ptyxc
[    2.107021] device: 'ptyxd': device_add
[    2.107764] PM: Adding info for No Bus:ptyxd
[    2.108657] device: 'ptyxe': device_add
[    2.109431] PM: Adding info for No Bus:ptyxe
[    2.110207] device: 'ptyxf': device_add
[    2.110949] PM: Adding info for No Bus:ptyxf
[    2.111738] device: 'ptyy0': device_add
[    2.112565] PM: Adding info for No Bus:ptyy0
[    2.113348] device: 'ptyy1': device_add
[    2.114088] PM: Adding info for No Bus:ptyy1
[    2.114831] device: 'ptyy2': device_add
[    2.115588] PM: Adding info for No Bus:ptyy2
[    2.116448] device: 'ptyy3': device_add
[    2.117236] PM: Adding info for No Bus:ptyy3
[    2.118021] device: 'ptyy4': device_add
[    2.118793] PM: Adding info for No Bus:ptyy4
[    2.119563] device: 'ptyy5': device_add
[    2.120412] PM: Adding info for No Bus:ptyy5
[    2.121181] device: 'ptyy6': device_add
[    2.121925] PM: Adding info for No Bus:ptyy6
[    2.122667] device: 'ptyy7': device_add
[    2.123432] PM: Adding info for No Bus:ptyy7
[    2.124261] device: 'ptyy8': device_add
[    2.125044] PM: Adding info for No Bus:ptyy8
[    2.125805] device: 'ptyy9': device_add
[    2.126534] PM: Adding info for No Bus:ptyy9
[    2.127296] device: 'ptyya': device_add
[    2.128031] PM: Adding info for No Bus:ptyya
[    2.128955] device: 'ptyyb': device_add
[    2.129822] PM: Adding info for No Bus:ptyyb
[    2.130586] device: 'ptyyc': device_add
[    2.131375] PM: Adding info for No Bus:ptyyc
[    2.132207] device: 'ptyyd': device_add
[    2.132977] PM: Adding info for No Bus:ptyyd
[    2.133742] device: 'ptyye': device_add
[    2.134472] PM: Adding info for No Bus:ptyye
[    2.135231] device: 'ptyyf': device_add
[    2.135978] PM: Adding info for No Bus:ptyyf
[    2.136867] device: 'ptyz0': device_add
[    2.137636] PM: Adding info for No Bus:ptyz0
[    2.138418] device: 'ptyz1': device_add
[    2.139192] PM: Adding info for No Bus:ptyz1
[    2.139941] device: 'ptyz2': device_add
[    2.140789] PM: Adding info for No Bus:ptyz2
[    2.141572] device: 'ptyz3': device_add
[    2.142341] PM: Adding info for No Bus:ptyz3
[    2.143104] device: 'ptyz4': device_add
[    2.143848] PM: Adding info for No Bus:ptyz4
[    2.144686] device: 'ptyz5': device_add
[    2.145446] PM: Adding info for No Bus:ptyz5
[    2.146186] device: 'ptyz6': device_add
[    2.146937] PM: Adding info for No Bus:ptyz6
[    2.147719] device: 'ptyz7': device_add
[    2.148584] PM: Adding info for No Bus:ptyz7
[    2.149360] device: 'ptyz8': device_add
[    2.150134] PM: Adding info for No Bus:ptyz8
[    2.150887] device: 'ptyz9': device_add
[    2.151661] PM: Adding info for No Bus:ptyz9
[    2.152502] device: 'ptyza': device_add
[    2.153282] PM: Adding info for No Bus:ptyza
[    2.154023] device: 'ptyzb': device_add
[    2.154752] PM: Adding info for No Bus:ptyzb
[    2.155532] device: 'ptyzc': device_add
[    2.156370] PM: Adding info for No Bus:ptyzc
[    2.157154] device: 'ptyzd': device_add
[    2.157916] PM: Adding info for No Bus:ptyzd
[    2.158700] device: 'ptyze': device_add
[    2.159460] PM: Adding info for No Bus:ptyze
[    2.160432] device: 'ptyzf': device_add
[    2.161185] PM: Adding info for No Bus:ptyzf
[    2.161928] device: 'ptya0': device_add
[    2.162656] PM: Adding info for No Bus:ptya0
[    2.163418] device: 'ptya1': device_add
[    2.164215] PM: Adding info for No Bus:ptya1
[    2.165000] device: 'ptya2': device_add
[    2.165727] PM: Adding info for No Bus:ptya2
[    2.166468] device: 'ptya3': device_add
[    2.167219] PM: Adding info for No Bus:ptya3
[    2.167977] device: 'ptya4': device_add
[    2.168838] PM: Adding info for No Bus:ptya4
[    2.169619] device: 'ptya5': device_add
[    2.170349] PM: Adding info for No Bus:ptya5
[    2.171113] device: 'ptya6': device_add
[    2.171895] PM: Adding info for No Bus:ptya6
[    2.172767] device: 'ptya7': device_add
[    2.173505] PM: Adding info for No Bus:ptya7
[    2.174247] device: 'ptya8': device_add
[    2.174999] PM: Adding info for No Bus:ptya8
[    2.175757] device: 'ptya9': device_add
[    2.176618] PM: Adding info for No Bus:ptya9
[    2.177394] device: 'ptyaa': device_add
[    2.178163] PM: Adding info for No Bus:ptyaa
[    2.178916] device: 'ptyab': device_add
[    2.179671] PM: Adding info for No Bus:ptyab
[    2.180549] device: 'ptyac': device_add
[    2.181287] PM: Adding info for No Bus:ptyac
[    2.182030] device: 'ptyad': device_add
[    2.182770] PM: Adding info for No Bus:ptyad
[    2.183570] device: 'ptyae': device_add
[    2.184424] PM: Adding info for No Bus:ptyae
[    2.185225] device: 'ptyaf': device_add
[    2.185998] PM: Adding info for No Bus:ptyaf
[    2.186781] device: 'ptyb0': device_add
[    2.187534] PM: Adding info for No Bus:ptyb0
[    2.188404] device: 'ptyb1': device_add
[    2.189225] PM: Adding info for No Bus:ptyb1
[    2.190036] device: 'ptyb2': device_add
[    2.190823] PM: Adding info for No Bus:ptyb2
[    2.191618] device: 'ptyb3': device_add
[    2.192472] PM: Adding info for No Bus:ptyb3
[    2.193253] device: 'ptyb4': device_add
[    2.193984] PM: Adding info for No Bus:ptyb4
[    2.194733] device: 'ptyb5': device_add
[    2.195492] PM: Adding info for No Bus:ptyb5
[    2.196353] device: 'ptyb6': device_add
[    2.197118] PM: Adding info for No Bus:ptyb6
[    2.197879] device: 'ptyb7': device_add
[    2.198611] PM: Adding info for No Bus:ptyb7
[    2.199380] device: 'ptyb8': device_add
[    2.200167] PM: Adding info for No Bus:ptyb8
[    2.200933] device: 'ptyb9': device_add
[    2.201660] PM: Adding info for No Bus:ptyb9
[    2.202400] device: 'ptyba': device_add
[    2.203149] PM: Adding info for No Bus:ptyba
[    2.203907] device: 'ptybb': device_add
[    2.204772] PM: Adding info for No Bus:ptybb
[    2.205539] device: 'ptybc': device_add
[    2.206268] PM: Adding info for No Bus:ptybc
[    2.207046] device: 'ptybd': device_add
[    2.207841] PM: Adding info for No Bus:ptybd
[    2.208763] device: 'ptybe': device_add
[    2.209605] PM: Adding info for No Bus:ptybe
[    2.210351] device: 'ptybf': device_add
[    2.211103] PM: Adding info for No Bus:ptybf
[    2.211888] device: 'ptyc0': device_add
[    2.212742] PM: Adding info for No Bus:ptyc0
[    2.213494] device: 'ptyc1': device_add
[    2.214260] PM: Adding info for No Bus:ptyc1
[    2.215020] device: 'ptyc2': device_add
[    2.215768] PM: Adding info for No Bus:ptyc2
[    2.216640] device: 'ptyc3': device_add
[    2.217403] PM: Adding info for No Bus:ptyc3
[    2.218154] device: 'ptyc4': device_add
[    2.218908] PM: Adding info for No Bus:ptyc4
[    2.219790] device: 'ptyc5': device_add
[    2.220658] PM: Adding info for No Bus:ptyc5
[    2.221399] device: 'ptyc6': device_add
[    2.222130] PM: Adding info for No Bus:ptyc6
[    2.222879] device: 'ptyc7': device_add
[    2.223630] PM: Adding info for No Bus:ptyc7
[    2.224487] device: 'ptyc8': device_add
[    2.225243] PM: Adding info for No Bus:ptyc8
[    2.226007] device: 'ptyc9': device_add
[    2.226751] PM: Adding info for No Bus:ptyc9
[    2.227533] device: 'ptyca': device_add
[    2.228357] PM: Adding info for No Bus:ptyca
[    2.229134] device: 'ptycb': device_add
[    2.229907] PM: Adding info for No Bus:ptycb
[    2.230691] device: 'ptycc': device_add
[    2.231471] PM: Adding info for No Bus:ptycc
[    2.232344] device: 'ptycd': device_add
[    2.233111] PM: Adding info for No Bus:ptycd
[    2.233944] device: 'ptyce': device_add
[    2.234731] PM: Adding info for No Bus:ptyce
[    2.235496] device: 'ptycf': device_add
[    2.236307] PM: Adding info for No Bus:ptycf
[    2.237075] device: 'ptyd0': device_add
[    2.237806] PM: Adding info for No Bus:ptyd0
[    2.238545] device: 'ptyd1': device_add
[    2.239299] PM: Adding info for No Bus:ptyd1
[    2.240060] device: 'ptyd2': device_add
[    2.240909] PM: Adding info for No Bus:ptyd2
[    2.241674] device: 'ptyd3': device_add
[    2.242406] PM: Adding info for No Bus:ptyd3
[    2.243166] device: 'ptyd4': device_add
[    2.243911] PM: Adding info for No Bus:ptyd4
[    2.244791] device: 'ptyd5': device_add
[    2.245570] PM: Adding info for No Bus:ptyd5
[    2.246353] device: 'ptyd6': device_add
[    2.247124] PM: Adding info for No Bus:ptyd6
[    2.247876] device: 'ptyd7': device_add
[    2.248769] PM: Adding info for No Bus:ptyd7
[    2.249552] device: 'ptyd8': device_add
[    2.250466] PM: Adding info for No Bus:ptyd8
[    2.251237] device: 'ptyd9': device_add
[    2.252031] PM: Adding info for No Bus:ptyd9
[    2.252913] device: 'ptyda': device_add
[    2.253685] PM: Adding info for No Bus:ptyda
[    2.254459] device: 'ptydb': device_add
[    2.255233] PM: Adding info for No Bus:ptydb
[    2.256034] device: 'ptydc': device_add
[    2.256904] PM: Adding info for No Bus:ptydc
[    2.257675] device: 'ptydd': device_add
[    2.258408] PM: Adding info for No Bus:ptydd
[    2.259195] device: 'ptyde': device_add
[    2.259940] PM: Adding info for No Bus:ptyde
[    2.260828] device: 'ptydf': device_add
[    2.261566] PM: Adding info for No Bus:ptydf
[    2.262309] device: 'ptye0': device_add
[    2.263074] PM: Adding info for No Bus:ptye0
[    2.263841] device: 'ptye1': device_add
[    2.264706] Refined TSC clocksource calibration: 2527.010 MHz.
[    2.265697] Switching to clocksource tsc
[    2.266582] PM: Adding info for No Bus:ptye1
[    2.267358] device: 'ptye2': device_add
[    2.268201] PM: Adding info for No Bus:ptye2
[    2.268979] device: 'ptye3': device_add
[    2.269798] PM: Adding info for No Bus:ptye3
[    2.270553] device: 'ptye4': device_add
[    2.271680] PM: Adding info for No Bus:ptye4
[    2.272481] device: 'ptye5': device_add
[    2.273360] PM: Adding info for No Bus:ptye5
[    2.274112] device: 'ptye6': device_add
[    2.274946] PM: Adding info for No Bus:ptye6
[    2.275748] device: 'ptye7': device_add
[    2.277004] PM: Adding info for No Bus:ptye7
[    2.277759] device: 'ptye8': device_add
[    2.278564] PM: Adding info for No Bus:ptye8
[    2.279463] device: 'ptye9': device_add
[    2.282570] PM: Adding info for No Bus:ptye9
[    2.283363] device: 'ptyea': device_add
[    2.284209] PM: Adding info for No Bus:ptyea
[    2.284978] device: 'ptyeb': device_add
[    2.285787] PM: Adding info for No Bus:ptyeb
[    2.286542] device: 'ptyec': device_add
[    2.287382] PM: Adding info for No Bus:ptyec
[    2.288169] device: 'ptyed': device_add
[    2.288990] PM: Adding info for No Bus:ptyed
[    2.289766] device: 'ptyee': device_add
[    2.290587] PM: Adding info for No Bus:ptyee
[    2.291392] device: 'ptyef': device_add
[    2.292235] PM: Adding info for No Bus:ptyef
[    2.293031] device: 'ttyp0': device_add
[    2.293835] PM: Adding info for No Bus:ttyp0
[    2.294585] device: 'ttyp1': device_add
[    2.295427] PM: Adding info for No Bus:ttyp1
[    2.296210] device: 'ttyp2': device_add
[    2.297649] PM: Adding info for No Bus:ttyp2
[    2.298410] device: 'ttyp3': device_add
[    2.299263] PM: Adding info for No Bus:ttyp3
[    2.300057] device: 'ttyp4': device_add
[    2.300913] PM: Adding info for No Bus:ttyp4
[    2.301690] device: 'ttyp5': device_add
[    2.302521] PM: Adding info for No Bus:ttyp5
[    2.303299] device: 'ttyp6': device_add
[    2.304145] PM: Adding info for No Bus:ttyp6
[    2.304923] device: 'ttyp7': device_add
[    2.305757] PM: Adding info for No Bus:ttyp7
[    2.306536] device: 'ttyp8': device_add
[    2.307427] PM: Adding info for No Bus:ttyp8
[    2.308227] device: 'ttyp9': device_add
[    2.309058] PM: Adding info for No Bus:ttyp9
[    2.309940] device: 'ttypa': device_add
[    2.310772] PM: Adding info for No Bus:ttypa
[    2.311573] device: 'ttypb': device_add
[    2.312631] PM: Adding info for No Bus:ttypb
[    2.313393] device: 'ttypc': device_add
[    2.314208] PM: Adding info for No Bus:ttypc
[    2.314971] device: 'ttypd': device_add
[    2.315808] PM: Adding info for No Bus:ttypd
[    2.316641] device: 'ttype': device_add
[    2.317869] PM: Adding info for No Bus:ttype
[    2.318644] device: 'ttypf': device_add
[    2.319482] PM: Adding info for No Bus:ttypf
[    2.320271] device: 'ttyq0': device_add
[    2.321129] PM: Adding info for No Bus:ttyq0
[    2.321878] device: 'ttyq1': device_add
[    2.322706] PM: Adding info for No Bus:ttyq1
[    2.323493] device: 'ttyq2': device_add
[    2.324746] PM: Adding info for No Bus:ttyq2
[    2.325523] device: 'ttyq3': device_add
[    2.326346] PM: Adding info for No Bus:ttyq3
[    2.327117] device: 'ttyq4': device_add
[    2.327934] PM: Adding info for No Bus:ttyq4
[    2.328742] device: 'ttyq5': device_add
[    2.329572] PM: Adding info for No Bus:ttyq5
[    2.330321] device: 'ttyq6': device_add
[    2.331678] PM: Adding info for No Bus:ttyq6
[    2.332474] device: 'ttyq7': device_add
[    2.333455] PM: Adding info for No Bus:ttyq7
[    2.334204] device: 'ttyq8': device_add
[    2.335016] PM: Adding info for No Bus:ttyq8
[    2.335811] device: 'ttyq9': device_add
[    2.336948] PM: Adding info for No Bus:ttyq9
[    2.337725] device: 'ttyqa': device_add
[    2.338573] PM: Adding info for No Bus:ttyqa
[    2.339353] device: 'ttyqb': device_add
[    2.341271] PM: Adding info for No Bus:ttyqb
[    2.342055] device: 'ttyqc': device_add
[    2.342897] PM: Adding info for No Bus:ttyqc
[    2.343679] device: 'ttyqd': device_add
[    2.344638] PM: Adding info for No Bus:ttyqd
[    2.345455] device: 'ttyqe': device_add
[    2.346283] PM: Adding info for No Bus:ttyqe
[    2.347092] device: 'ttyqf': device_add
[    2.348366] PM: Adding info for No Bus:ttyqf
[    2.349542] device: 'ttyr0': device_add
[    2.350803] PM: Adding info for No Bus:ttyr0
[    2.352002] device: 'ttyr1': device_add
[    2.353320] PM: Adding info for No Bus:ttyr1
[    2.354623] device: 'ttyr2': device_add
[    2.355942] PM: Adding info for No Bus:ttyr2
[    2.357163] device: 'ttyr3': device_add
[    2.358431] PM: Adding info for No Bus:ttyr3
[    2.359452] device: 'ttyr4': device_add
[    2.361056] PM: Adding info for No Bus:ttyr4
[    2.361841] device: 'ttyr5': device_add
[    2.362680] PM: Adding info for No Bus:ttyr5
[    2.363454] device: 'ttyr6': device_add
[    2.364910] PM: Adding info for No Bus:ttyr6
[    2.365681] device: 'ttyr7': device_add
[    2.366502] PM: Adding info for No Bus:ttyr7
[    2.367259] device: 'ttyr8': device_add
[    2.368145] PM: Adding info for No Bus:ttyr8
[    2.368923] device: 'ttyr9': device_add
[    2.369876] PM: Adding info for No Bus:ttyr9
[    2.370627] device: 'ttyra': device_add
[    2.372200] PM: Adding info for No Bus:ttyra
[    2.372965] device: 'ttyrb': device_add
[    2.373776] PM: Adding info for No Bus:ttyrb
[    2.374533] device: 'ttyrc': device_add
[    2.375356] PM: Adding info for No Bus:ttyrc
[    2.376164] device: 'ttyrd': device_add
[    2.377021] PM: Adding info for No Bus:ttyrd
[    2.377802] device: 'ttyre': device_add
[    2.378613] PM: Adding info for No Bus:ttyre
[    2.379407] device: 'ttyrf': device_add
[    2.380233] PM: Adding info for No Bus:ttyrf
[    2.381009] device: 'ttys0': device_add
[    2.381830] PM: Adding info for No Bus:ttys0
[    2.382579] device: 'ttys1': device_add
[    2.383425] PM: Adding info for No Bus:ttys1
[    2.384231] device: 'ttys2': device_add
[    2.385077] PM: Adding info for No Bus:ttys2
[    2.385853] device: 'ttys3': device_add
[    2.386687] PM: Adding info for No Bus:ttys3
[    2.387485] device: 'ttys4': device_add
[    2.388489] PM: Adding info for No Bus:ttys4
[    2.389263] device: 'ttys5': device_add
[    2.390103] PM: Adding info for No Bus:ttys5
[    2.390899] device: 'ttys6': device_add
[    2.392548] PM: Adding info for No Bus:ttys6
[    2.393324] device: 'ttys7': device_add
[    2.394184] PM: Adding info for No Bus:ttys7
[    2.394976] device: 'ttys8': device_add
[    2.395830] PM: Adding info for No Bus:ttys8
[    2.396677] device: 'ttys9': device_add
[    2.397497] PM: Adding info for No Bus:ttys9
[    2.398272] device: 'ttysa': device_add
[    2.399103] PM: Adding info for No Bus:ttysa
[    2.399977] device: 'ttysb': device_add
[    2.401391] PM: Adding info for No Bus:ttysb
[    2.402168] device: 'ttysc': device_add
[    2.403020] PM: Adding info for No Bus:ttysc
[    2.403793] device: 'ttysd': device_add
[    2.404651] PM: Adding info for No Bus:ttysd
[    2.405458] device: 'ttyse': device_add
[    2.406277] PM: Adding info for No Bus:ttyse
[    2.407065] device: 'ttysf': device_add
[    2.407882] PM: Adding info for No Bus:ttysf
[    2.408683] device: 'ttyt0': device_add
[    2.409506] PM: Adding info for No Bus:ttyt0
[    2.410283] device: 'ttyt1': device_add
[    2.411118] PM: Adding info for No Bus:ttyt1
[    2.411904] device: 'ttyt2': device_add
[    2.412745] PM: Adding info for No Bus:ttyt2
[    2.413520] device: 'ttyt3': device_add
[    2.414335] PM: Adding info for No Bus:ttyt3
[    2.415121] device: 'ttyt4': device_add
[    2.416158] PM: Adding info for No Bus:ttyt4
[    2.416937] device: 'ttyt5': device_add
[    2.417758] PM: Adding info for No Bus:ttyt5
[    2.418532] device: 'ttyt6': device_add
[    2.419358] PM: Adding info for No Bus:ttyt6
[    2.420287] device: 'ttyt7': device_add
[    2.421119] PM: Adding info for No Bus:ttyt7
[    2.421912] device: 'ttyt8': device_add
[    2.422724] PM: Adding info for No Bus:ttyt8
[    2.423518] device: 'ttyt9': device_add
[    2.424422] PM: Adding info for No Bus:ttyt9
[    2.425199] device: 'ttyta': device_add
[    2.426037] PM: Adding info for No Bus:ttyta
[    2.426821] device: 'ttytb': device_add
[    2.427649] PM: Adding info for No Bus:ttytb
[    2.428448] device: 'ttytc': device_add
[    2.429585] PM: Adding info for No Bus:ttytc
[    2.430461] device: 'ttytd': device_add
[    2.431365] PM: Adding info for No Bus:ttytd
[    2.432192] device: 'ttyte': device_add
[    2.433031] PM: Adding info for No Bus:ttyte
[    2.433808] device: 'ttytf': device_add
[    2.434624] PM: Adding info for No Bus:ttytf
[    2.435451] device: 'ttyu0': device_add
[    2.436848] PM: Adding info for No Bus:ttyu0
[    2.437621] device: 'ttyu1': device_add
[    2.438436] PM: Adding info for No Bus:ttyu1
[    2.439219] device: 'ttyu2': device_add
[    2.440162] PM: Adding info for No Bus:ttyu2
[    2.440937] device: 'ttyu3': device_add
[    2.441756] PM: Adding info for No Bus:ttyu3
[    2.442530] device: 'ttyu4': device_add
[    2.443451] PM: Adding info for No Bus:ttyu4
[    2.444252] device: 'ttyu5': device_add
[    2.445081] PM: Adding info for No Bus:ttyu5
[    2.445855] device: 'ttyu6': device_add
[    2.446672] PM: Adding info for No Bus:ttyu6
[    2.447468] device: 'ttyu7': device_add
[    2.448596] PM: Adding info for No Bus:ttyu7
[    2.449584] device: 'ttyu8': device_add
[    2.450399] PM: Adding info for No Bus:ttyu8
[    2.451209] device: 'ttyu9': device_add
[    2.452057] PM: Adding info for No Bus:ttyu9
[    2.452857] device: 'ttyua': device_add
[    2.453674] PM: Adding info for No Bus:ttyua
[    2.454450] device: 'ttyub': device_add
[    2.455280] PM: Adding info for No Bus:ttyub
[    2.456056] device: 'ttyuc': device_add
[    2.457232] PM: Adding info for No Bus:ttyuc
[    2.458008] device: 'ttyud': device_add
[    2.458821] PM: Adding info for No Bus:ttyud
[    2.459734] device: 'ttyue': device_add
[    2.460580] PM: Adding info for No Bus:ttyue
[    2.461357] device: 'ttyuf': device_add
[    2.462179] PM: Adding info for No Bus:ttyuf
[    2.462969] device: 'ttyv0': device_add
[    2.464162] PM: Adding info for No Bus:ttyv0
[    2.464937] device: 'ttyv1': device_add
[    2.465761] PM: Adding info for No Bus:ttyv1
[    2.466537] device: 'ttyv2': device_add
[    2.467366] PM: Adding info for No Bus:ttyv2
[    2.468169] device: 'ttyv3': device_add
[    2.468987] PM: Adding info for No Bus:ttyv3
[    2.469763] device: 'ttyv4': device_add
[    2.470622] PM: Adding info for No Bus:ttyv4
[    2.471416] device: 'ttyv5': device_add
[    2.473193] PM: Adding info for No Bus:ttyv5
[    2.473968] device: 'ttyv6': device_add
[    2.474788] PM: Adding info for No Bus:ttyv6
[    2.475578] device: 'ttyv7': device_add
[    2.476698] PM: Adding info for No Bus:ttyv7
[    2.477475] device: 'ttyv8': device_add
[    2.478295] PM: Adding info for No Bus:ttyv8
[    2.479110] device: 'ttyv9': device_add
[    2.479931] PM: Adding info for No Bus:ttyv9
[    2.480731] device: 'ttyva': device_add
[    2.481629] PM: Adding info for No Bus:ttyva
[    2.482413] device: 'ttyvb': device_add
[    2.483257] PM: Adding info for No Bus:ttyvb
[    2.484034] device: 'ttyvc': device_add
[    2.484879] PM: Adding info for No Bus:ttyvc
[    2.485654] device: 'ttyvd': device_add
[    2.486483] PM: Adding info for No Bus:ttyvd
[    2.487295] device: 'ttyve': device_add
[    2.488164] PM: Adding info for No Bus:ttyve
[    2.488941] device: 'ttyvf': device_add
[    2.489864] PM: Adding info for No Bus:ttyvf
[    2.490639] device: 'ttyw0': device_add
[    2.491471] PM: Adding info for No Bus:ttyw0
[    2.492277] device: 'ttyw1': device_add
[    2.493095] PM: Adding info for No Bus:ttyw1
[    2.493873] device: 'ttyw2': device_add
[    2.494691] PM: Adding info for No Bus:ttyw2
[    2.495491] device: 'ttyw3': device_add
[    2.496361] PM: Adding info for No Bus:ttyw3
[    2.497137] device: 'ttyw4': device_add
[    2.497960] PM: Adding info for No Bus:ttyw4
[    2.499000] device: 'ttyw5': device_add
[    2.499818] PM: Adding info for No Bus:ttyw5
[    2.500656] device: 'ttyw6': device_add
[    2.501468] PM: Adding info for No Bus:ttyw6
[    2.502242] device: 'ttyw7': device_add
[    2.503208] PM: Adding info for No Bus:ttyw7
[    2.503985] device: 'ttyw8': device_add
[    2.505226] PM: Adding info for No Bus:ttyw8
[    2.506014] device: 'ttyw9': device_add
[    2.506934] PM: Adding info for No Bus:ttyw9
[    2.507721] device: 'ttywa': device_add
[    2.508567] PM: Adding info for No Bus:ttywa
[    2.509343] device: 'ttywb': device_add
[    2.510200] PM: Adding info for No Bus:ttywb
[    2.510987] device: 'ttywc': device_add
[    2.512165] PM: Adding info for No Bus:ttywc
[    2.512941] device: 'ttywd': device_add
[    2.513773] PM: Adding info for No Bus:ttywd
[    2.514574] device: 'ttywe': device_add
[    2.515427] PM: Adding info for No Bus:ttywe
[    2.516225] device: 'ttywf': device_add
[    2.517044] PM: Adding info for No Bus:ttywf
[    2.517820] device: 'ttyx0': device_add
[    2.518640] PM: Adding info for No Bus:ttyx0
[    2.519434] device: 'ttyx1': device_add
[    2.520503] PM: Adding info for No Bus:ttyx1
[    2.521278] device: 'ttyx2': device_add
[    2.522097] PM: Adding info for No Bus:ttyx2
[    2.522881] device: 'ttyx3': device_add
[    2.523700] PM: Adding info for No Bus:ttyx3
[    2.524502] device: 'ttyx4': device_add
[    2.525598] PM: Adding info for No Bus:ttyx4
[    2.526392] device: 'ttyx5': device_add
[    2.527233] PM: Adding info for No Bus:ttyx5
[    2.528009] device: 'ttyx6': device_add
[    2.529102] PM: Adding info for No Bus:ttyx6
[    2.529876] device: 'ttyx7': device_add
[    2.530696] PM: Adding info for No Bus:ttyx7
[    2.531508] device: 'ttyx8': device_add
[    2.533014] PM: Adding info for No Bus:ttyx8
[    2.533789] device: 'ttyx9': device_add
[    2.534611] PM: Adding info for No Bus:ttyx9
[    2.535398] device: 'ttyxa': device_add
[    2.536591] PM: Adding info for No Bus:ttyxa
[    2.537378] device: 'ttyxb': device_add
[    2.538200] PM: Adding info for No Bus:ttyxb
[    2.538988] device: 'ttyxc': device_add
[    2.539809] PM: Adding info for No Bus:ttyxc
[    2.540612] device: 'ttyxd': device_add
[    2.541433] PM: Adding info for No Bus:ttyxd
[    2.542236] device: 'ttyxe': device_add
[    2.543093] PM: Adding info for No Bus:ttyxe
[    2.543869] device: 'ttyxf': device_add
[    2.544923] PM: Adding info for No Bus:ttyxf
[    2.545697] device: 'ttyy0': device_add
[    2.546520] PM: Adding info for No Bus:ttyy0
[    2.547307] device: 'ttyy1': device_add
[    2.548131] PM: Adding info for No Bus:ttyy1
[    2.548968] device: 'ttyy2': device_add
[    2.549875] PM: Adding info for No Bus:ttyy2
[    2.550651] device: 'ttyy3': device_add
[    2.551489] PM: Adding info for No Bus:ttyy3
[    2.552292] device: 'ttyy4': device_add
[    2.553128] PM: Adding info for No Bus:ttyy4
[    2.553904] device: 'ttyy5': device_add
[    2.554728] PM: Adding info for No Bus:ttyy5
[    2.555521] device: 'ttyy6': device_add
[    2.557027] PM: Adding info for No Bus:ttyy6
[    2.557805] device: 'ttyy7': device_add
[    2.558806] PM: Adding info for No Bus:ttyy7
[    2.559593] device: 'ttyy8': device_add
[    2.561070] PM: Adding info for No Bus:ttyy8
[    2.561844] device: 'ttyy9': device_add
[    2.562663] PM: Adding info for No Bus:ttyy9
[    2.563448] device: 'ttyya': device_add
[    2.564293] PM: Adding info for No Bus:ttyya
[    2.565069] device: 'ttyyb': device_add
[    2.565890] PM: Adding info for No Bus:ttyyb
[    2.566664] device: 'ttyyc': device_add
[    2.567505] PM: Adding info for No Bus:ttyyc
[    2.568305] device: 'ttyyd': device_add
[    2.569150] PM: Adding info for No Bus:ttyyd
[    2.569952] device: 'ttyye': device_add
[    2.570890] PM: Adding info for No Bus:ttyye
[    2.571668] device: 'ttyyf': device_add
[    2.572560] PM: Adding info for No Bus:ttyyf
[    2.573349] device: 'ttyz0': device_add
[    2.574170] PM: Adding info for No Bus:ttyz0
[    2.574953] device: 'ttyz1': device_add
[    2.575965] PM: Adding info for No Bus:ttyz1
[    2.576764] device: 'ttyz2': device_add
[    2.577593] PM: Adding info for No Bus:ttyz2
[    2.578380] device: 'ttyz3': device_add
[    2.579222] PM: Adding info for No Bus:ttyz3
[    2.580059] device: 'ttyz4': device_add
[    2.581201] PM: Adding info for No Bus:ttyz4
[    2.581975] device: 'ttyz5': device_add
[    2.582796] PM: Adding info for No Bus:ttyz5
[    2.583580] device: 'ttyz6': device_add
[    2.585053] PM: Adding info for No Bus:ttyz6
[    2.585830] device: 'ttyz7': device_add
[    2.586650] PM: Adding info for No Bus:ttyz7
[    2.587438] device: 'ttyz8': device_add
[    2.588925] PM: Adding info for No Bus:ttyz8
[    2.589698] device: 'ttyz9': device_add
[    2.590556] PM: Adding info for No Bus:ttyz9
[    2.591358] device: 'ttyza': device_add
[    2.592229] PM: Adding info for No Bus:ttyza
[    2.593009] device: 'ttyzb': device_add
[    2.593844] PM: Adding info for No Bus:ttyzb
[    2.594618] device: 'ttyzc': device_add
[    2.595451] PM: Adding info for No Bus:ttyzc
[    2.596269] device: 'ttyzd': device_add
[    2.597094] PM: Adding info for No Bus:ttyzd
[    2.598707] device: 'ttyze': device_add
[    2.599744] PM: Adding info for No Bus:ttyze
[    2.600544] device: 'ttyzf': device_add
[    2.601365] PM: Adding info for No Bus:ttyzf
[    2.602143] device: 'ttya0': device_add
[    2.603006] PM: Adding info for No Bus:ttya0
[    2.603785] device: 'ttya1': device_add
[    2.604632] PM: Adding info for No Bus:ttya1
[    2.605406] device: 'ttya2': device_add
[    2.606228] PM: Adding info for No Bus:ttya2
[    2.607015] device: 'ttya3': device_add
[    2.607838] PM: Adding info for No Bus:ttya3
[    2.608640] device: 'ttya4': device_add
[    2.609474] PM: Adding info for No Bus:ttya4
[    2.610314] device: 'ttya5': device_add
[    2.611205] PM: Adding info for No Bus:ttya5
[    2.611983] device: 'ttya6': device_add
[    2.612839] PM: Adding info for No Bus:ttya6
[    2.613616] device: 'ttya7': device_add
[    2.614439] PM: Adding info for No Bus:ttya7
[    2.615233] device: 'ttya8': device_add
[    2.616061] PM: Adding info for No Bus:ttya8
[    2.616865] device: 'ttya9': device_add
[    2.617696] PM: Adding info for No Bus:ttya9
[    2.618471] device: 'ttyaa': device_add
[    2.619306] PM: Adding info for No Bus:ttyaa
[    2.620143] device: 'ttyab': device_add
[    2.620964] PM: Adding info for No Bus:ttyab
[    2.621740] device: 'ttyac': device_add
[    2.622586] PM: Adding info for No Bus:ttyac
[    2.623371] device: 'ttyad': device_add
[    2.624232] PM: Adding info for No Bus:ttyad
[    2.625044] device: 'ttyae': device_add
[    2.626034] PM: Adding info for No Bus:ttyae
[    2.626812] device: 'ttyaf': device_add
[    2.627658] PM: Adding info for No Bus:ttyaf
[    2.628462] device: 'ttyb0': device_add
[    2.629829] PM: Adding info for No Bus:ttyb0
[    2.630603] device: 'ttyb1': device_add
[    2.631462] PM: Adding info for No Bus:ttyb1
[    2.632263] device: 'ttyb2': device_add
[    2.633095] PM: Adding info for No Bus:ttyb2
[    2.633870] device: 'ttyb3': device_add
[    2.634695] PM: Adding info for No Bus:ttyb3
[    2.635483] device: 'ttyb4': device_add
[    2.636391] PM: Adding info for No Bus:ttyb4
[    2.637168] device: 'ttyb5': device_add
[    2.638005] PM: Adding info for No Bus:ttyb5
[    2.638784] device: 'ttyb6': device_add
[    2.639632] PM: Adding info for No Bus:ttyb6
[    2.640431] device: 'ttyb7': device_add
[    2.642150] PM: Adding info for No Bus:ttyb7
[    2.642934] device: 'ttyb8': device_add
[    2.643761] PM: Adding info for No Bus:ttyb8
[    2.644563] device: 'ttyb9': device_add
[    2.645385] PM: Adding info for No Bus:ttyb9
[    2.646172] device: 'ttyba': device_add
[    2.647008] PM: Adding info for No Bus:ttyba
[    2.647787] device: 'ttybb': device_add
[    2.648636] PM: Adding info for No Bus:ttybb
[    2.649427] device: 'ttybc': device_add
[    2.650262] PM: Adding info for No Bus:ttybc
[    2.651054] device: 'ttybd': device_add
[    2.651901] PM: Adding info for No Bus:ttybd
[    2.652730] device: 'ttybe': device_add
[    2.653570] PM: Adding info for No Bus:ttybe
[    2.654344] device: 'ttybf': device_add
[    2.655179] PM: Adding info for No Bus:ttybf
[    2.655952] device: 'ttyc0': device_add
[    2.656809] PM: Adding info for No Bus:ttyc0
[    2.657586] device: 'ttyc1': device_add
[    2.658410] PM: Adding info for No Bus:ttyc1
[    2.659194] device: 'ttyc2': device_add
[    2.660017] PM: Adding info for No Bus:ttyc2
[    2.660820] device: 'ttyc3': device_add
[    2.661647] PM: Adding info for No Bus:ttyc3
[    2.662419] device: 'ttyc4': device_add
[    2.663261] PM: Adding info for No Bus:ttyc4
[    2.664039] device: 'ttyc5': device_add
[    2.664897] PM: Adding info for No Bus:ttyc5
[    2.665672] device: 'ttyc6': device_add
[    2.666499] PM: Adding info for No Bus:ttyc6
[    2.667284] device: 'ttyc7': device_add
[    2.668153] PM: Adding info for No Bus:ttyc7
[    2.668927] device: 'ttyc8': device_add
[    2.669751] PM: Adding info for No Bus:ttyc8
[    2.670529] device: 'ttyc9': device_add
[    2.671468] PM: Adding info for No Bus:ttyc9
[    2.672269] device: 'ttyca': device_add
[    2.673106] PM: Adding info for No Bus:ttyca
[    2.673877] device: 'ttycb': device_add
[    2.674700] PM: Adding info for No Bus:ttycb
[    2.675491] device: 'ttycc': device_add
[    2.676521] PM: Adding info for No Bus:ttycc
[    2.677297] device: 'ttycd': device_add
[    2.678121] PM: Adding info for No Bus:ttycd
[    2.678937] device: 'ttyce': device_add
[    2.679776] PM: Adding info for No Bus:ttyce
[    2.680575] device: 'ttycf': device_add
[    2.681399] PM: Adding info for No Bus:ttycf
[    2.682169] device: 'ttyd0': device_add
[    2.683003] PM: Adding info for No Bus:ttyd0
[    2.683776] device: 'ttyd1': device_add
[    2.685200] PM: Adding info for No Bus:ttyd1
[    2.685976] device: 'ttyd2': device_add
[    2.686804] PM: Adding info for No Bus:ttyd2
[    2.687598] device: 'ttyd3': device_add
[    2.689116] PM: Adding info for No Bus:ttyd3
[    2.689895] device: 'ttyd4': device_add
[    2.690718] PM: Adding info for No Bus:ttyd4
[    2.691507] device: 'ttyd5': device_add
[    2.692400] PM: Adding info for No Bus:ttyd5
[    2.693174] device: 'ttyd6': device_add
[    2.694001] PM: Adding info for No Bus:ttyd6
[    2.694775] device: 'ttyd7': device_add
[    2.695615] PM: Adding info for No Bus:ttyd7
[    2.696414] device: 'ttyd8': device_add
[    2.697252] PM: Adding info for No Bus:ttyd8
[    2.698033] device: 'ttyd9': device_add
[    2.698890] PM: Adding info for No Bus:ttyd9
[    2.699669] device: 'ttyda': device_add
[    2.700787] PM: Adding info for No Bus:ttyda
[    2.701565] device: 'ttydb': device_add
[    2.702395] PM: Adding info for No Bus:ttydb
[    2.703180] device: 'ttydc': device_add
[    2.704020] PM: Adding info for No Bus:ttydc
[    2.704825] device: 'ttydd': device_add
[    2.705653] PM: Adding info for No Bus:ttydd
[    2.706453] device: 'ttyde': device_add
[    2.707328] PM: Adding info for No Bus:ttyde
[    2.708103] device: 'ttydf': device_add
[    2.709026] PM: Adding info for No Bus:ttydf
[    2.709801] device: 'ttye0': device_add
[    2.710626] PM: Adding info for No Bus:ttye0
[    2.711420] device: 'ttye1': device_add
[    2.712315] PM: Adding info for No Bus:ttye1
[    2.713089] device: 'ttye2': device_add
[    2.713917] PM: Adding info for No Bus:ttye2
[    2.714691] device: 'ttye3': device_add
[    2.716157] PM: Adding info for No Bus:ttye3
[    2.716931] device: 'ttye4': device_add
[    2.717758] PM: Adding info for No Bus:ttye4
[    2.718532] device: 'ttye5': device_add
[    2.719370] PM: Adding info for No Bus:ttye5
[    2.720169] device: 'ttye6': device_add
[    2.721005] PM: Adding info for No Bus:ttye6
[    2.721779] device: 'ttye7': device_add
[    2.722618] PM: Adding info for No Bus:ttye7
[    2.723419] device: 'ttye8': device_add
[    2.724425] PM: Adding info for No Bus:ttye8
[    2.725202] device: 'ttye9': device_add
[    2.726043] PM: Adding info for No Bus:ttye9
[    2.726822] device: 'ttyea': device_add
[    2.727666] PM: Adding info for No Bus:ttyea
[    2.728467] device: 'ttyeb': device_add
[    2.729293] PM: Adding info for No Bus:ttyeb
[    2.730069] device: 'ttyec': device_add
[    2.731023] PM: Adding info for No Bus:ttyec
[    2.731799] device: 'ttyed': device_add
[    2.733256] PM: Adding info for No Bus:ttyed
[    2.734060] device: 'ttyee': device_add
[    2.734892] PM: Adding info for No Bus:ttyee
[    2.735667] device: 'ttyef': device_add
[    2.737265] PM: Adding info for No Bus:ttyef
[    2.738057] device: 'ptmx': device_add
[    2.738881] PM: Adding info for No Bus:ptmx
[    2.739646] initcall pty_init+0x0/0x11 returned 0 after 833399 usecs
[    2.740792] calling  sysrq_init+0x0/0x58 @ 1
[    2.741563] initcall sysrq_init+0x0/0x58 returned 0 after 14 usecs
[    2.742646] calling  gsm_init+0x0/0x109 @ 1
[    2.743411] initcall gsm_init+0x0/0x109 returned 0 after 13 usecs
[    2.744505] calling  n_tracesink_init+0x0/0x3c @ 1
[    2.745352] initcall n_tracesink_init+0x0/0x3c returned 0 after 1 usecs
[    2.746511] calling  r3964_init+0x0/0x3f @ 1
[    2.747283] r3964: Philips r3964 Driver $Revision: 1.10 $
[    2.748258] initcall r3964_init+0x0/0x3f returned 0 after 953 usecs
[    2.749561] calling  serial8250_init+0x0/0x15c @ 1
[    2.750404] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.751563] Registering platform device 'serial8250'. Parent at platform
[    2.752761] device: 'serial8250': device_add
[    2.753525] bus: 'platform': add device serial8250
[    2.754396] PM: Adding info for platform:serial8250
[    2.779636] async_waiting @ 1
[    2.780199] async_continuing @ 1 after 4 usec
[    2.908227] async_waiting @ 1
[    2.908767] async_continuing @ 1 after 1 usec
�[    3.036346] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.037422] device: 'ttyS0': device_add
[    3.039370] PM: Adding info for No Bus:ttyS0
[    3.105668] device: 'ttyS1': device_add
[    3.106505] PM: Adding info for No Bus:ttyS1
[    3.120216] device: 'ttyS2': device_add
[    3.121022] PM: Adding info for No Bus:ttyS2
[    3.132258] device: 'ttyS3': device_add
[    3.133536] PM: Adding info for No Bus:ttyS3
[    3.152180] bus: 'platform': add driver serial8250
[    3.153041] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[    3.154616] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[    3.156096] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[    3.158318] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[    3.159755] initcall serial8250_init+0x0/0x15c returned 0 after 399756 usecs
[    3.161018] calling  serial8250_pnp_init+0x0/0xf @ 1
[    3.161893] bus: 'pnp': add driver serial
[    3.162696] bus: 'pnp': driver_probe_device: matched device 00:06 with driver serial
[    3.164054] bus: 'pnp': really_probe: probing driver serial with device 00:06
[    3.165779] device: 'ttyS0': device_unregister
[    3.166569] PM: Removing info for No Bus:ttyS0
[    3.168191] device: 'ttyS0': device_create_release
[    3.193699] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.194690] device: 'ttyS0': device_add
[    3.216109] PM: Adding info for No Bus:ttyS0
[    3.240200] driver: '00:06': driver_bound: bound to device 'serial'
[    3.241316] bus: 'pnp': really_probe: bound device 00:06 to driver serial
[    3.242546] initcall serial8250_pnp_init+0x0/0xf returned 0 after 78763 usecs
[    3.243810] calling  serial8250_pci_init+0x0/0x16 @ 1
[    3.244733] bus: 'pci': add driver serial
[    3.245556] initcall serial8250_pci_init+0x0/0x16 returned 0 after 805 usecs
[    3.246799] calling  mca_init+0x0/0x1d @ 1
[    3.247531] initcall mca_init+0x0/0x1d returned -19 after 0 usecs
[    3.248755] calling  init_kgdboc+0x0/0x15 @ 1
[    3.249550] initcall init_kgdboc+0x0/0x15 returned 0 after 25 usecs
[    3.250653] calling  timbuart_init+0x0/0xf @ 1
[    3.251458] bus: 'platform': add driver timb-uart
[    3.252338] initcall timbuart_init+0x0/0xf returned 0 after 859 usecs
[    3.253467] calling  altera_jtaguart_init+0x0/0x33 @ 1
[    3.254384] bus: 'platform': add driver altera_jtaguart
[    3.255335] initcall altera_jtaguart_init+0x0/0x33 returned 0 after 944 usecs
[    3.256609] calling  pch_uart_module_init+0x0/0x3a @ 1
[    3.257529] bus: 'pci': add driver pch_uart
[    3.258303] initcall pch_uart_module_init+0x0/0x3a returned 0 after 769 usecs
[    3.259587] calling  rand_initialize+0x0/0x30 @ 1
[    3.261397] initcall rand_initialize+0x0/0x30 returned 0 after 26 usecs
[    3.262553] calling  init+0x0/0x9c @ 1
[    3.263234] device class 'virtio-ports': registering
[    3.264184] bus: 'virtio': add driver virtio_console
[    3.265081] initcall init+0x0/0x9c returned 0 after 1803 usecs
[    3.266105] calling  nvram_init+0x0/0x7e @ 1
[    3.266869] device: 'nvram': device_add
[    3.268215] PM: Adding info for No Bus:nvram
[    3.268994] Non-volatile memory driver v1.3
[    3.269829] initcall nvram_init+0x0/0x7e returned 0 after 2893 usecs
[    3.270954] calling  mod_init+0x0/0x1ba @ 1
[    3.271861] initcall mod_init+0x0/0x1ba returned -19 after 161 usecs
[    3.273009] calling  mod_init+0x0/0x12d @ 1
[    3.273768] initcall mod_init+0x0/0x12d returned -19 after 18 usecs
[    3.274889] calling  mod_init+0x0/0x48 @ 1
[    3.275618] initcall mod_init+0x0/0x48 returned -19 after 0 usecs
[    3.276716] calling  ppdev_init+0x0/0xbc @ 1
[    3.277592] device class 'ppdev': registering
[    3.278408] ppdev: user-space parallel port driver
[    3.279263] initcall ppdev_init+0x0/0xbc returned 0 after 1636 usecs
[    3.280404] calling  pc8736x_gpio_init+0x0/0x2bf @ 1
[    3.281281] Registering platform device 'pc8736x_gpio.0'. Parent at platform
[    3.282512] device: 'pc8736x_gpio.0': device_add
[    3.283343] bus: 'platform': add device pc8736x_gpio.0
[    3.284296] PM: Adding info for platform:pc8736x_gpio.0
[    3.285240] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    3.287323] platform pc8736x_gpio.0: no device found
[    3.288220] PM: Removing info for platform:pc8736x_gpio.0
[    3.289223] bus: 'platform': remove device pc8736x_gpio.0
[    3.290190] initcall pc8736x_gpio_init+0x0/0x2bf returned -19 after 8703 usecs
[    3.291464] calling  nsc_gpio_init+0x0/0x16 @ 1
[    3.292284] nsc_gpio initializing
[    3.292875] initcall nsc_gpio_init+0x0/0x16 returned 0 after 575 usecs
[    3.294016] calling  tlclk_init+0x0/0x1fa @ 1
[    3.294798] telclk_interrup = 0xf non-mcpbl0010 hw.
[    3.295724] initcall tlclk_init+0x0/0x1fa returned -6 after 918 usecs
[    3.296882] initcall tlclk_init+0x0/0x1fa returned with error code -6 
[    3.298026] calling  mwave_init+0x0/0x1e2 @ 1
[    3.298883] smapi::smapi_init, ERROR invalid usSmapiID
[    3.299788] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    3.301437] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    3.302693] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    3.303805] initcall mwave_init+0x0/0x1e2 returned -5 after 4834 usecs
[    3.304969] initcall mwave_init+0x0/0x1e2 returned with error code -5 
[    3.306115] calling  hangcheck_init+0x0/0xab @ 1
[    3.306937] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    3.309363] Hangcheck: Using getrawmonotonic().
[    3.310165] initcall hangcheck_init+0x0/0xab returned 0 after 3150 usecs
[    3.311355] calling  ramoops_init+0x0/0xa9 @ 1
[    3.312175] bus: 'platform': add driver ramoops
[    3.313022] bus: 'platform': remove driver ramoops
[    3.313884] driver: 'ramoops': driver_release
[    3.314655] ramoops: platform device not found, using module parameters
[    3.315827] Registering platform device 'ramoops'. Parent at platform
[    3.316991] device: 'ramoops': device_add
[    3.317709] bus: 'platform': add device ramoops
[    3.318531] PM: Adding info for platform:ramoops
[    3.319375] bus: 'platform': add driver ramoops
[    3.320209] bus: 'platform': driver_probe_device: matched device ramoops with driver ramoops
[    3.321682] bus: 'platform': really_probe: probing driver ramoops with device ramoops
[    3.323069] ramoops: The memory size and the record size must be non-zero
[    3.324296] ramoops: probe of ramoops failed with error -22
[    3.325295] bus: 'platform': remove driver ramoops
[    3.326154] driver: 'ramoops': driver_release
[    3.326947] PM: Removing info for platform:ramoops
[    3.327824] bus: 'platform': remove device ramoops
[    3.328713] initcall ramoops_init+0x0/0xa9 returned -19 after 16150 usecs
[    3.329900] calling  parport_default_proc_register+0x0/0x16 @ 1
[    3.330948] initcall parport_default_proc_register+0x0/0x16 returned 0 after 4 usecs
[    3.332326] calling  parport_ax88796_init+0x0/0xf @ 1
[    3.333957] bus: 'platform': add driver ax88796-pp
[    3.334825] initcall parport_ax88796_init+0x0/0xf returned 0 after 847 usecs
[    3.336080] calling  topology_sysfs_init+0x0/0x78 @ 1
[    3.337026] initcall topology_sysfs_init+0x0/0x78 returned 0 after 29 usecs
[    3.338250] calling  cpqarray_init+0x0/0x5f @ 1
[    3.339170] Compaq SMART2 Driver (v 2.6.0)
[    3.339894] bus: 'pci': add driver cpqarray
[    3.340798] bus: 'pci': remove driver cpqarray
[    3.341616] driver: 'cpqarray': driver_release
[    3.342405] initcall cpqarray_init+0x0/0x5f returned -19 after 3157 usecs
[    3.343606] calling  pkt_init+0x0/0x19d @ 1
[    3.344541] device class 'pktcdvd': registering
[    3.345395] device: 'pktcdvd': device_add
[    3.346273] PM: Adding info for No Bus:pktcdvd
[    3.347107] initcall pkt_init+0x0/0x19d returned 0 after 2529 usecs
[    3.348233] calling  osdblk_init+0x0/0x83 @ 1
[    3.349007] device class 'osdblk': registering
[    3.349810] initcall osdblk_init+0x0/0x83 returned 0 after 783 usecs
[    3.351124] calling  init+0x0/0x79 @ 1
[    3.351798] bus: 'virtio': add driver virtio_blk
[    3.352660] initcall init+0x0/0x79 returned 0 after 850 usecs
[    3.353674] calling  ub_init+0x0/0x71 @ 1
[    3.354486] bus: 'usb': add driver ub
[    3.355168] usbcore: registered new interface driver ub
[    3.356108] initcall ub_init+0x0/0x71 returned 0 after 1588 usecs
[    3.357208] calling  rbd_init+0x0/0x57 @ 1
[    3.357964] bus: 'rbd': registered
[    3.358574] device: 'rbd': device_add
[    3.359990] PM: Adding info for No Bus:rbd
[    3.360751] rbd: loaded rbd (rados block device)
[    3.361569] initcall rbd_init+0x0/0x57 returned 0 after 3548 usecs
[    3.362705] calling  lkdtm_module_init+0x0/0x107 @ 1
[    3.363630] lkdtm: No crash points registered, enable through debugfs
[    3.364791] initcall lkdtm_module_init+0x0/0x107 returned 0 after 1168 usecs
[    3.366034] calling  sm501_base_init+0x0/0x20 @ 1
[    3.366876] bus: 'platform': add driver sm501
[    3.367671] bus: 'pci': add driver sm501
[    3.368532] initcall sm501_base_init+0x0/0x20 returned 0 after 1615 usecs
[    3.369721] calling  timberdale_init+0x0/0x4b @ 1
[    3.370553] bus: 'pci': add driver timberdale
[    3.371371] Driver for timberdale has been successfully registered.
[    3.372501] initcall timberdale_init+0x0/0x4b returned 0 after 1901 usecs
[    3.373692] calling  lpc_sch_init+0x0/0x16 @ 1
[    3.374475] bus: 'pci': add driver lpc_sch
[    3.375239] initcall lpc_sch_init+0x0/0x16 returned 0 after 746 usecs
[    3.376398] calling  rdc321x_sb_init+0x0/0x16 @ 1
[    3.377241] bus: 'pci': add driver RDC321x Southbridge
[    3.378178] initcall rdc321x_sb_init+0x0/0x16 returned 0 after 915 usecs
[    3.379362] calling  cs5535_mfd_init+0x0/0x16 @ 1
[    3.380221] bus: 'pci': add driver cs5535-mfd
[    3.381066] initcall cs5535_mfd_init+0x0/0x16 returned 0 after 824 usecs
[    3.382242] calling  scsi_tgt_init+0x0/0x87 @ 1
[    3.383318] device: 'tgt': device_add
[    3.384800] PM: Adding info for No Bus:tgt
[    3.385544] initcall scsi_tgt_init+0x0/0x87 returned 0 after 2432 usecs
[    3.386766] calling  raid_init+0x0/0xf @ 1
[    3.387506] device class 'raid_devices': registering
[    3.388429] initcall raid_init+0x0/0xf returned 0 after 902 usecs
[    3.389500] calling  spi_transport_init+0x0/0x75 @ 1
[    3.390373] device class 'spi_transport': registering
[    3.391287] device class 'spi_host': registering
[    3.392116] initcall spi_transport_init+0x0/0x75 returned 0 after 1703 usecs
[    3.393382] calling  fc_transport_init+0x0/0x71 @ 1
[    3.394298] device class 'fc_host': registering
[    3.395141] device class 'fc_vports': registering
[    3.395984] device class 'fc_remote_ports': registering
[    3.396944] device class 'fc_transport': registering
[    3.397833] initcall fc_transport_init+0x0/0x71 returned 0 after 3450 usecs
[    3.399250] calling  iscsi_transport_init+0x0/0x13a @ 1
[    3.400204] Loading iSCSI transport class v2.0-870.
[    3.401065] device class 'iscsi_transport': registering
[    3.402000] device class 'iscsi_endpoint': registering
[    3.402928] device class 'iscsi_host': registering
[    3.403789] device class 'iscsi_connection': registering
[    3.404763] device class 'iscsi_session': registering
[    3.406346] initcall iscsi_transport_init+0x0/0x13a returned 0 after 6001 usecs
[    3.407646] calling  srp_transport_init+0x0/0x33 @ 1
[    3.408555] device class 'srp_host': registering
[    3.409383] device class 'srp_remote_ports': registering
[    3.410331] initcall srp_transport_init+0x0/0x33 returned 0 after 1733 usecs
[    3.411576] calling  init_st+0x0/0xfc @ 1
[    3.412316] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    3.413419] device class 'scsi_tape': registering
[    3.414263] bus: 'scsi': add driver st
[    3.415694] initcall init_st+0x0/0xfc returned 0 after 3306 usecs
[    3.416798] calling  init_sd+0x0/0x14b @ 1
[    3.417541] device class 'scsi_disk': registering
[    3.418386] bus: 'scsi': add driver sd
[    3.419094] initcall init_sd+0x0/0x14b returned 0 after 1532 usecs
[    3.420203] calling  init_ch_module+0x0/0xab @ 1
[    3.421022] SCSI Media Changer driver v0.25 
[    3.421779] device class 'scsi_changer': registering
[    3.422673] bus: 'scsi': add driver ch
[    3.423370] initcall init_ch_module+0x0/0xab returned 0 after 2296 usecs
[    3.424573] calling  osd_uld_init+0x0/0xbf @ 1
[    3.425356] device class 'scsi_osd': registering
[    3.426185] bus: 'scsi': add driver osd
[    3.427375] osd: LOADED open-osd 0.2.0
[    3.428041] initcall osd_uld_init+0x0/0xbf returned 0 after 2621 usecs
[    3.429396] calling  ahci_init+0x0/0x16 @ 1
[    3.430139] bus: 'pci': add driver ahci
[    3.430879] initcall ahci_init+0x0/0x16 returned 0 after 723 usecs
[    3.431965] calling  ahci_init+0x0/0x14 @ 1
[    3.432732] bus: 'platform': add driver ahci
[    3.433537] bus: 'platform': remove driver ahci
[    3.434349] driver: 'ahci': driver_release
[    3.435100] initcall ahci_init+0x0/0x14 returned -19 after 2317 usecs
[    3.436306] calling  qs_ata_init+0x0/0x16 @ 1
[    3.437080] bus: 'pci': add driver sata_qstor
[    3.437881] initcall qs_ata_init+0x0/0x16 returned 0 after 783 usecs
[    3.439012] calling  pdc_sata_init+0x0/0x16 @ 1
[    3.439814] bus: 'pci': add driver sata_sx4
[    3.440616] initcall pdc_sata_init+0x0/0x16 returned 0 after 781 usecs
[    3.441759] calling  piix_init+0x0/0x24 @ 1
[    3.442512] bus: 'pci': add driver ata_piix
[    3.444069] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver ata_piix
[    3.445603] bus: 'pci': really_probe: probing driver ata_piix with device 0000:00:01.1
[    3.447079] ata_piix 0000:00:01.1: version 2.13
[    3.448075] ata_piix 0000:00:01.1: enabling bus mastering
[    3.449077] ata_piix 0000:00:01.1: setting latency timer to 64
[    3.450309] device: 'ata1': device_add
[    3.451009] PM: Adding info for No Bus:ata1
[    3.451758] device: 'ata1': device_add
[    3.452528] PM: Adding info for No Bus:ata1
[    3.453379] device: 'link1': device_add
[    3.454099] PM: Adding info for No Bus:link1
[    3.454877] device: 'link1': device_add
[    3.455597] PM: Adding info for No Bus:link1
[    3.456420] device: 'dev1.0': device_add
[    3.457138] PM: Adding info for No Bus:dev1.0
[    3.457917] device: 'dev1.0': device_add
[    3.458773] PM: Adding info for No Bus:dev1.0
[    3.459599] device: 'dev1.1': device_add
[    3.460340] PM: Adding info for No Bus:dev1.1
[    3.461117] device: 'dev1.1': device_add
[    3.461847] PM: Adding info for No Bus:dev1.1
[    3.462698] device: 'ata2': device_add
[    3.463471] PM: Adding info for No Bus:ata2
[    3.464245] device: 'ata2': device_add
[    3.464957] PM: Adding info for No Bus:ata2
[    3.465729] device: 'link2': device_add
[    3.466432] PM: Adding info for No Bus:link2
[    3.467207] device: 'link2': device_add
[    3.467923] PM: Adding info for No Bus:link2
[    3.468739] device: 'dev2.0': device_add
[    3.469456] PM: Adding info for No Bus:dev2.0
[    3.470238] device: 'dev2.0': device_add
[    3.470977] PM: Adding info for No Bus:dev2.0
[    3.471806] device: 'dev2.1': device_add
[    3.472555] PM: Adding info for No Bus:dev2.1
[    3.473334] device: 'dev2.1': device_add
[    3.474065] PM: Adding info for No Bus:dev2.1
[    3.476520] scsi0 : ata_piix
[    3.477116] device: 'host0': device_add
[    3.477809] bus: 'scsi': add device host0
[    3.478541] PM: Adding info for scsi:host0
[    3.479309] device: 'host0': device_add
[    3.480101] PM: Adding info for No Bus:host0
[    3.481849] scsi1 : ata_piix
[    3.482371] device: 'host1': device_add
[    3.483069] bus: 'scsi': add device host1
[    3.483803] PM: Adding info for scsi:host1
[    3.484586] device: 'host1': device_add
[    3.485390] PM: Adding info for No Bus:host1
[    3.486173] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[    3.487377] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[    3.488741] driver: '0000:00:01.1': driver_bound: bound to device 'ata_piix'
[    3.488767] calling  2_async_port_probe+0x0/0x70 @ 78
[    3.489267] calling  3_async_port_probe+0x0/0x70 @ 5
[    3.491781] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver ata_piix
[    3.493229] initcall piix_init+0x0/0x24 returned 0 after 49526 usecs
[    3.494352] calling  mv_init+0x0/0x3a @ 1
[    3.495073] bus: 'pci': add driver sata_mv
[    3.495833] bus: 'platform': add driver sata_mv
[    3.496681] initcall mv_init+0x0/0x3a returned 0 after 1570 usecs
[    3.497751] calling  nv_init+0x0/0x16 @ 1
[    3.498461] bus: 'pci': add driver sata_nv
[    3.499227] initcall nv_init+0x0/0x16 returned 0 after 749 usecs
[    3.500314] calling  pdc_ata_init+0x0/0x16 @ 1
[    3.502048] bus: 'pci': add driver sata_promise
[    3.502919] initcall pdc_ata_init+0x0/0x16 returned 0 after 855 usecs
[    3.504050] calling  uli_init+0x0/0x16 @ 1
[    3.504802] bus: 'pci': add driver sata_uli
[    3.505580] initcall uli_init+0x0/0x16 returned 0 after 760 usecs
[    3.506653] calling  ali_init+0x0/0x40 @ 1
[    3.507393] bus: 'pci': add driver pata_ali
[    3.508190] initcall ali_init+0x0/0x40 returned 0 after 783 usecs
[    3.509260] calling  amd_init+0x0/0x16 @ 1
[    3.509988] bus: 'pci': add driver pata_amd
[    3.510776] initcall amd_init+0x0/0x16 returned 0 after 773 usecs
[    3.511858] calling  atp867x_init+0x0/0x16 @ 1
[    3.512671] bus: 'pci': add driver pata_atp867x
[    3.513505] initcall atp867x_init+0x0/0x16 returned 0 after 815 usecs
[    3.514643] calling  cs5520_init+0x0/0x16 @ 1
[    3.515428] bus: 'pci': add driver pata_cs5520
[    3.516278] initcall cs5520_init+0x0/0x16 returned 0 after 828 usecs
[    3.517392] calling  cs5536_init+0x0/0x16 @ 1
[    3.518165] bus: 'pci': add driver pata_cs5536
[    3.519114] initcall cs5536_init+0x0/0x16 returned 0 after 930 usecs
[    3.520205] scsi host0: rpm_resume flags 0x4
[    3.520207] scsi host0: rpm_resume returns 1
[    3.520954] scsi host1: rpm_resume flags 0x4
[    3.520956] scsi host1: rpm_resume returns 1
[    3.523467] calling  efar_init+0x0/0x16 @ 1
[    3.524230] bus: 'pci': add driver pata_efar
[    3.525019] initcall efar_init+0x0/0x16 returned 0 after 771 usecs
[    3.526108] calling  hpt36x_init+0x0/0x16 @ 1
[    3.526889] bus: 'pci': add driver pata_hpt366
[    3.528474] initcall hpt36x_init+0x0/0x16 returned 0 after 1547 usecs
[    3.529614] calling  hpt37x_init+0x0/0x16 @ 1
[    3.530385] bus: 'pci': add driver pata_hpt37x
[    3.531215] initcall hpt37x_init+0x0/0x16 returned 0 after 811 usecs
[    3.532363] calling  hpt3x3_init+0x0/0x16 @ 1
[    3.533137] bus: 'pci': add driver pata_hpt3x3
[    3.533973] initcall hpt3x3_init+0x0/0x16 returned 0 after 821 usecs
[    3.535109] calling  it821x_init+0x0/0x16 @ 1
[    3.535877] bus: 'pci': add driver pata_it821x
[    3.536720] initcall it821x_init+0x0/0x16 returned 0 after 821 usecs
[    3.537838] calling  jmicron_init+0x0/0x16 @ 1
[    3.538621] bus: 'pci': add driver pata_jmicron
[    3.539464] initcall jmicron_init+0x0/0x16 returned 0 after 824 usecs
[    3.540619] calling  netcell_init+0x0/0x16 @ 1
[    3.541407] bus: 'pci': add driver pata_netcell
[    3.542293] initcall netcell_init+0x0/0x16 returned 0 after 866 usecs
[    3.543439] calling  ninja32_init+0x0/0x16 @ 1
[    3.544246] bus: 'pci': add driver pata_ninja32
[    3.545076] initcall ninja32_init+0x0/0x16 returned 0 after 811 usecs
[    3.546247] calling  ns87415_init+0x0/0x16 @ 1
[    3.547051] bus: 'pci': add driver pata_ns87415
[    3.548710] initcall ns87415_init+0x0/0x16 returned 0 after 1622 usecs
[    3.549902] calling  oldpiix_init+0x0/0x16 @ 1
[    3.550689] bus: 'pci': add driver pata_oldpiix
[    3.551533] initcall oldpiix_init+0x0/0x16 returned 0 after 825 usecs
[    3.552692] calling  optidma_init+0x0/0x16 @ 1
[    3.553480] bus: 'pci': add driver pata_optidma
[    3.554312] initcall optidma_init+0x0/0x16 returned 0 after 813 usecs
[    3.555454] calling  pdc202xx_init+0x0/0x16 @ 1
[    3.556278] bus: 'pci': add driver pata_pdc202xx_old
[    3.557189] initcall pdc202xx_init+0x0/0x16 returned 0 after 890 usecs
[    3.558337] calling  radisys_init+0x0/0x16 @ 1
[    3.559142] bus: 'pci': add driver pata_radisys
[    3.559982] initcall radisys_init+0x0/0x16 returned 0 after 821 usecs
[    3.561247] calling  sc1200_init+0x0/0x16 @ 1
[    3.562018] bus: 'pci': add driver sc1200
[    3.562760] initcall sc1200_init+0x0/0x16 returned 0 after 725 usecs
[    3.563895] calling  sch_init+0x0/0x16 @ 1
[    3.564658] bus: 'pci': add driver pata_sch
[    3.565435] initcall sch_init+0x0/0x16 returned 0 after 763 usecs
[    3.566512] calling  sil680_init+0x0/0x16 @ 1
[    3.567296] bus: 'pci': add driver pata_sil680
[    3.568113] initcall sil680_init+0x0/0x16 returned 0 after 799 usecs
[    3.569258] calling  triflex_init+0x0/0x16 @ 1
[    3.570043] bus: 'pci': add driver pata_triflex
[    3.571608] initcall triflex_init+0x0/0x16 returned 0 after 1530 usecs
[    3.572780] calling  via_init+0x0/0x16 @ 1
[    3.573512] bus: 'pci': add driver pata_via
[    3.574287] initcall via_init+0x0/0x16 returned 0 after 758 usecs
[    3.575369] calling  sl82c105_init+0x0/0x16 @ 1
[    3.576208] bus: 'pci': add driver pata_sl82c105
[    3.577065] initcall sl82c105_init+0x0/0x16 returned 0 after 838 usecs
[    3.578328] calling  cmd640_init+0x0/0x16 @ 1
[    3.579111] bus: 'pci': add driver pata_cmd640
[    3.579930] initcall cmd640_init+0x0/0x16 returned 0 after 805 usecs
[    3.581081] calling  ns87410_init+0x0/0x16 @ 1
[    3.581872] bus: 'pci': add driver pata_ns87410
[    3.582707] initcall ns87410_init+0x0/0x16 returned 0 after 817 usecs
[    3.583858] calling  rz1000_init+0x0/0x16 @ 1
[    3.584716] bus: 'pci': add driver pata_rz1000
[    3.585528] initcall rz1000_init+0x0/0x16 returned 0 after 794 usecs
[    3.586646] calling  pacpi_init+0x0/0x16 @ 1
[    3.587412] bus: 'pci': add driver pata_acpi
[    3.588223] initcall pacpi_init+0x0/0x16 returned 0 after 791 usecs
[    3.589332] calling  target_core_init_configfs+0x0/0x2be @ 1
[    3.592039] initcall target_core_init_configfs+0x0/0x2be returned 0 after 1668 usecs
[    3.593432] calling  fileio_module_init+0x0/0xf @ 1
[    3.594294] initcall fileio_module_init+0x0/0xf returned 0 after 1 usecs
[    3.595485] calling  pscsi_module_init+0x0/0xf @ 1
[    3.596369] initcall pscsi_module_init+0x0/0xf returned 0 after 1 usecs
[    3.597532] calling  iscsi_target_init_module+0x0/0x231 @ 1
[    3.601471] initcall iscsi_target_init_module+0x0/0x231 returned 0 after 2889 usecs
[    3.602817] calling  cicada_init+0x0/0x33 @ 1
[    3.603603] bus: 'mdio_bus': add driver Cicada Cis8204
[    3.604560] bus: 'mdio_bus': add driver Cicada Cis8201
[    3.605484] initcall cicada_init+0x0/0x33 returned 0 after 1840 usecs
[    3.606615] calling  smsc_init+0x0/0x81 @ 1
[    3.607373] bus: 'mdio_bus': add driver SMSC LAN83C185
[    3.608395] bus: 'mdio_bus': add driver SMSC LAN8187
[    3.609332] bus: 'mdio_bus': add driver SMSC LAN8700
[    3.610229] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[    3.611330] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[    3.612378] initcall smsc_init+0x0/0x81 returned 0 after 4887 usecs
[    3.613476] calling  broadcom_init+0x0/0x135 @ 1
[    3.614285] bus: 'mdio_bus': add driver Broadcom BCM5411
[    3.615979] bus: 'mdio_bus': add driver Broadcom BCM5421
[    3.616964] bus: 'mdio_bus': add driver Broadcom BCM5461
[    3.617914] bus: 'mdio_bus': add driver Broadcom BCM5464
[    3.618883] bus: 'mdio_bus': add driver Broadcom BCM5481
[    3.619839] bus: 'mdio_bus': add driver Broadcom BCM5482
[    3.620820] bus: 'mdio_bus': add driver Broadcom BCM50610
[    3.621792] bus: 'mdio_bus': add driver Broadcom BCM50610M
[    3.622775] bus: 'mdio_bus': add driver Broadcom BCM57780
[    3.623759] bus: 'mdio_bus': add driver Broadcom BCMAC131
[    3.624754] bus: 'mdio_bus': add driver Broadcom BCM5241
[    3.625709] initcall broadcom_init+0x0/0x135 returned 0 after 11155 usecs
[    3.627432] calling  icplus_init+0x0/0x24 @ 1
[    3.628241] bus: 'mdio_bus': add driver ICPlus IP1001
[    3.629154] bus: 'mdio_bus': add driver ICPlus IP175C
[    3.630063] initcall icplus_init+0x0/0x24 returned 0 after 1780 usecs
[    3.631206] calling  et1011c_init+0x0/0xf @ 1
[    3.631975] bus: 'mdio_bus': add driver ET1011C
[    3.632835] initcall et1011c_init+0x0/0xf returned 0 after 838 usecs
[    3.633978] calling  fixed_mdio_bus_init+0x0/0xf6 @ 1
[    3.634885] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[    3.636152] device: 'Fixed MDIO bus.0': device_add
[    3.637035] bus: 'platform': add device Fixed MDIO bus.0
[    3.637994] PM: Adding info for platform:Fixed MDIO bus.0
[    3.639815] device: '0': device_add
[    3.640492] PM: Adding info for No Bus:0
[    3.641226] Fixed MDIO Bus: probed
[    3.641888] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 6842 usecs
[    3.643256] calling  ns_init+0x0/0xf @ 1
[    3.643977] bus: 'mdio_bus': add driver NatSemi DP83865
[    3.644947] initcall ns_init+0x0/0xf returned 0 after 946 usecs
[    3.646033] calling  ksphy_init+0x0/0x81 @ 1
[    3.646823] bus: 'mdio_bus': add driver Micrel KS8001 or KS8721
[    3.647922] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY
[    3.649061] bus: 'mdio_bus': add driver Micrel KS8737
[    3.649970] bus: 'mdio_bus': add driver Micrel KS8041
[    3.650891] bus: 'mdio_bus': add driver Micrel KS8051
[    3.652018] initcall ksphy_init+0x0/0x81 returned 0 after 5074 usecs
[    3.653157] calling  e1000_init_module+0x0/0x80 @ 1
[    3.654019] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.655268] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.656302] bus: 'pci': add driver e1000
[    3.657048] initcall e1000_init_module+0x0/0x80 returned 0 after 2959 usecs
[    3.658266] calling  e1000_init_module+0x0/0x39 @ 1
[    3.659141] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
[    3.660164] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    3.661253] bus: 'pci': add driver e1000e
[    3.661995] initcall e1000_init_module+0x0/0x39 returned 0 after 2791 usecs
[    3.663947] calling  igb_init_module+0x0/0x49 @ 1
[    3.664854] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k
[    3.665994] Copyright (c) 2007-2011 Intel Corporation.
[    3.666918] bus: 'pci': add driver igb
[    3.667615] initcall igb_init_module+0x0/0x49 returned 0 after 2697 usecs
[    3.668834] calling  ipg_init_module+0x0/0x16 @ 1
[    3.669737] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[    3.671123] initcall ipg_init_module+0x0/0x16 returned 0 after 1361 usecs
[    3.672337] calling  bonding_init+0x0/0xaa @ 1
[    3.673124] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    3.675569] device: 'bond0': device_add
[    3.676475] PM: Adding info for No Bus:bond0
[    3.677614] ata1.01: NODEV after polling detection
[    3.677991] initcall bonding_init+0x0/0xaa returned 0 after 4755 usecs
[    3.677994] calling  atl1_init_module+0x0/0x16 @ 1
[    3.677997] bus: 'pci': add driver atl1
[    3.678030] initcall atl1_init_module+0x0/0x16 returned 0 after 32 usecs
[    3.678032] calling  jme_init_module+0x0/0x2d @ 1
[    3.678038] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.678041] bus: 'pci': add driver jme
[    3.678072] initcall jme_init_module+0x0/0x2d returned 0 after 36 usecs
[    3.678074] calling  vmxnet3_init_module+0x0/0x35 @ 1
[    3.678076] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI
[    3.678079] bus: 'pci': add driver vmxnet3
[    3.678120] initcall vmxnet3_init_module+0x0/0x35 returned 0 after 42 usecs
[    3.678122] calling  plip_init+0x0/0x59 @ 1
[    3.678126] initcall plip_init+0x0/0x59 returned 0 after 1 usecs
[    3.678128] calling  cas_init+0x0/0x36 @ 1
[    3.678131] bus: 'pci': add driver cassini
[    3.678160] initcall cas_init+0x0/0x36 returned 0 after 29 usecs
[    3.678162] calling  ne2k_pci_init+0x0/0x16 @ 1
[    3.678165] bus: 'pci': add driver ne2k-pci
[    3.678195] initcall ne2k_pci_init+0x0/0x16 returned 0 after 29 usecs
[    3.678197] calling  e100_init_module+0x0/0x5a @ 1
[    3.678202] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    3.678204] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.678207] bus: 'pci': add driver e100
[    3.678243] initcall e100_init_module+0x0/0x5a returned 0 after 42 usecs
[    3.678245] calling  sis190_init_module+0x0/0x16 @ 1
[    3.678252] bus: 'pci': add driver sis190
[    3.678293] initcall sis190_init_module+0x0/0x16 returned 0 after 44 usecs
[    3.678295] calling  fealnx_init+0x0/0x16 @ 1
[    3.678298] bus: 'pci': add driver fealnx
[    3.678329] initcall fealnx_init+0x0/0x16 returned 0 after 30 usecs
[    3.678331] calling  tg3_init+0x0/0x16 @ 1
[    3.678334] bus: 'pci': add driver tg3
[    3.678364] initcall tg3_init+0x0/0x16 returned 0 after 30 usecs
[    3.678367] calling  skge_init_module+0x0/0x2e @ 1
[    3.678385] bus: 'pci': add driver skge
[    3.678416] initcall skge_init_module+0x0/0x2e returned 0 after 32 usecs
[    3.678418] calling  ks8851_init+0x0/0xf @ 1
[    3.678421] bus: 'platform': add driver ks8851_mll
[    3.678446] initcall ks8851_init+0x0/0xf returned 0 after 24 usecs
[    3.678448] calling  ksz884x_init_module+0x0/0x16 @ 1
[    3.678451] bus: 'pci': add driver ksz884xp
[    3.678480] initcall ksz884x_init_module+0x0/0x16 returned 0 after 29 usecs
[    3.678482] calling  rhine_init+0x0/0x54 @ 1
[    3.678502] bus: 'pci': add driver via-rhine
[    3.678534] initcall rhine_init+0x0/0x54 returned 0 after 47 usecs
[    3.678536] calling  sundance_init+0x0/0x16 @ 1
[    3.678539] bus: 'pci': add driver sundance
[    3.678569] initcall sundance_init+0x0/0x16 returned 0 after 30 usecs
[    3.678571] calling  hamachi_init+0x0/0x16 @ 1
[    3.678573] bus: 'pci': add driver hamachi
[    3.678608] initcall hamachi_init+0x0/0x16 returned 0 after 34 usecs
[    3.678611] calling  net_olddevs_init+0x0/0x8e @ 1
[    3.680082] initcall net_olddevs_init+0x0/0x8e returned 0 after 1434 usecs
[    3.680084] calling  sb1000_init+0x0/0xf @ 1
[    3.680087] bus: 'pnp': add driver sb1000
[    3.680122] initcall sb1000_init+0x0/0xf returned 0 after 34 usecs
[    3.680124] calling  hp100_module_init+0x0/0x16 @ 1
[    3.680127] bus: 'pci': add driver hp100
[    3.680192] initcall hp100_module_init+0x0/0x16 returned 0 after 40 usecs
[    3.680195] calling  NS8390p_init_module+0x0/0x7 @ 1
[    3.680197] initcall NS8390p_init_module+0x0/0x7 returned 0 after 0 usecs
[    3.680199] calling  init_nic+0x0/0x16 @ 1
[    3.680202] bus: 'pci': add driver forcedeth
[    3.680234] initcall init_nic+0x0/0x16 returned 0 after 32 usecs
[    3.680237] calling  ql3xxx_init_module+0x0/0x16 @ 1
[    3.680239] bus: 'pci': add driver qla3xxx
[    3.680269] initcall ql3xxx_init_module+0x0/0x16 returned 0 after 29 usecs
[    3.680271] calling  slip_init+0x0/0xa9 @ 1
[    3.680277] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[    3.680279] SLIP linefill/keepalive option.
[    3.680283] initcall slip_init+0x0/0xa9 returned 0 after 9 usecs
[    3.680285] calling  macvlan_init_module+0x0/0x31 @ 1
[    3.680294] initcall macvlan_init_module+0x0/0x31 returned 0 after 6 usecs
[    3.680307] calling  macvtap_init+0x0/0xc0 @ 1
[    3.680316] device class 'macvtap': registering
[    3.680354] initcall macvtap_init+0x0/0xc0 returned 0 after 42 usecs
[    3.680356] calling  rtl8139_init_module+0x0/0x16 @ 1
[    3.680359] bus: 'pci': add driver 8139too
[    3.680374] bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver 8139too
[    3.680377] bus: 'pci': really_probe: probing driver 8139too with device 0000:00:03.0
[    3.680395] 8139too: 8139too Fast Ethernet driver 0.9.28
[    3.680398] 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp
[    3.680431] initcall rtl8139_init_module+0x0/0x16 returned 0 after 70 usecs
[    3.680433] calling  depca_module_init+0x0/0xea @ 1
[    3.680436] bus: 'platform': add driver depca
[    3.680461] Registering platform device 'depca.0'. Parent at platform
[    3.680463] device: 'depca.0': device_add
[    3.680470] bus: 'platform': add device depca.0
[    3.680490] PM: Adding info for platform:depca.0
[    3.680510] bus: 'platform': driver_probe_device: matched device depca.0 with driver depca
[    3.680512] bus: 'platform': really_probe: probing driver depca with device depca.0
[    3.681079] PM: Removing info for platform:depca.0
[    3.681117] bus: 'platform': remove device depca.0
[    3.681136] Registering platform device 'depca.1'. Parent at platform
[    3.681138] device: 'depca.1': device_add
[    3.681145] bus: 'platform': add device depca.1
[    3.681164] PM: Adding info for platform:depca.1
[    3.681183] bus: 'platform': driver_probe_device: matched device depca.1 with driver depca
[    3.681199] bus: 'platform': really_probe: probing driver depca with device depca.1
[    3.681803] PM: Removing info for platform:depca.1
[    3.681837] bus: 'platform': remove device depca.1
[    3.681855] initcall depca_module_init+0x0/0xea returned 0 after 1386 usecs
[    3.681857] calling  atp_init_module+0x0/0x94 @ 1
[    3.681866] atp.c:v1.09=ac 2002/10/01 Donald Becker <[email protected]>
[    3.682237] initcall atp_init_module+0x0/0x94 returned -19 after 367 usecs
[    3.682239] calling  eql_init_module+0x0/0x68 @ 1
[    3.682244] eql: Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected])
[    3.682258] device: 'eql': device_add
[    3.682376] PM: Adding info for No Bus:eql
[    3.682439] initcall eql_init_module+0x0/0x68 returned 0 after 192 usecs
[    3.682441] calling  tun_init+0x0/0x8b @ 1
[    3.682447] tun: Universal TUN/TAP device driver, 1.6
[    3.682448] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    3.682457] device: 'tun': device_add
[    3.787835] PM: Adding info for No Bus:tun
[    3.788141] ata2.01: NODEV after polling detection
[    3.788914] ata2.00: ATAPI: QEMU DVD-ROM, 0.12.5, max UDMA/100
[    3.789809] ata2.00: configured for MWDMA2
[    3.790102] ata1.00: ATA-7: QEMU HARDDISK, 0.12.5, max UDMA/100
[    3.790105] ata1.00: 2097152 sectors, multi 16: LBA48 
[    3.791046] ata1.00: configured for MWDMA2
[    3.791128] scsi host0: rpm_suspend flags 0x0
[    3.791144] scsi host0: rpm_suspend returns 0
[    3.791151] async_waiting @ 78
[    3.791154] async_continuing @ 78 after 1 usec
[    3.791184] scsi target0:0:0: rpm_resume flags 0x4
[    3.791186] scsi target0:0:0: rpm_resume returns -13
[    3.791213] scsi host0: rpm_resume flags 0x4
[    3.791216] ata_piix 0000:00:01.1: rpm_resume flags 0x0
[    3.791217] ata_piix 0000:00:01.1: rpm_resume returns 1
[    3.791223] scsi host0: rpm_resume returns 0
[    3.791708] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
[    3.791723] device: 'target0:0:0': device_add
[    3.791763] bus: 'scsi': add device target0:0:0
[    3.791794] PM: Adding info for scsi:target0:0:0
[    3.791842] scsi target0:0:0: rpm_resume flags 0x4
[    3.791844] scsi target0:0:0: rpm_resume returns 1
[    3.791848] scsi 0:0:0:0: rpm_resume flags 0x0
[    3.791849] scsi 0:0:0:0: rpm_resume returns -13
[    3.791853] scsi 0:0:0:0: rpm_resume flags 0x4
[    3.791854] scsi 0:0:0:0: rpm_resume returns 1
[    3.791857] device: '0:0:0:0': device_add
[    3.791898] bus: 'scsi': add device 0:0:0:0
[    3.791920] PM: Adding info for scsi:0:0:0:0
[    3.791935] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[    3.791939] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
[    3.791965] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[    3.791968] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[    3.792080] device: '0:0:0:0': device_add
[    3.792157] PM: Adding info for No Bus:0:0:0:0
[    3.792275] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[    3.792277] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[    3.792283] device: '0:0:0:0': device_add
[    3.792330] PM: Adding info for No Bus:0:0:0:0
[    3.792440] device: '0:0:0:0': device_add
[    3.792703] PM: Adding info for No Bus:0:0:0:0

1,456 lines not shown · raw message

16 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#6 lore raw
Quoted 97 lines · Paul E. McKenney
Quoted 94 lines · Ingo Molnar
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36
Quoted 1 line

Config and full bootlog attached.

Quoted 7 lines

Hello, Ingo,

It appears that inlining has defeated me, so I tried reproducing under KVM, using the closest bootable approximation to your .config (attached). I booted ten times without seeing this error. I have my changes against 3.1-rc8. I will try against 3.1, but in the meantime any enlightenment would be most welcome. ;-)

And I cannot reproduce after merging into 3.1. :-(

Thanx, Paul

#7 lore raw
Quoted 100 lines · Paul E. McKenney
Quoted 99 lines · Paul E. McKenney
Quoted 94 lines · Ingo Molnar
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36
Quoted 1 line

Config and full bootlog attached.

Hello, Ingo,

Quoted 7 lines
Quoted 5 lines

It appears that inlining has defeated me, so I tried reproducing under KVM, using the closest bootable approximation to your .config (attached). I booted ten times without seeing this error. I have my changes against 3.1-rc8. I will try against 3.1, but in the meantime any enlightenment would be most welcome. ;-)

And I cannot reproduce after merging into 3.1. :-(

Here's another one i just got with latest -tip:

PM: Adding info for No Bus:vcsa2

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
 [<81abe239>] ? printk+0x18/0x1a
 [<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
 [<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<8108cca8>] perf_event_comm+0x18/0x60
 [<810d1abd>] ? set_task_comm+0x5d/0x80
 [<81af622d>] ? _raw_spin_unlock+0x1d/0x40
 [<810d1ac4>] set_task_comm+0x64/0x80
 [<810d25fd>] setup_new_exec+0xbd/0x1d0
 [<810d1b61>] ? flush_old_exec+0x81/0xa0
 [<8110753e>] load_elf_binary+0x28e/0xa00
 [<810d2101>] ? search_binary_handler+0xd1/0x1d0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<811072b0>] ? load_elf_library+0x260/0x260
 [<810d2108>] search_binary_handler+0xd8/0x1d0
 [<810d2060>] ? search_binary_handler+0x30/0x1d0
 [<810d242f>] do_execve_common+0x22f/0x2a0
 [<810d24b2>] do_execve+0x12/0x20
 [<81009592>] sys_execve+0x32/0x70
 [<81af7752>] ptregs_execve+0x12/0x20
 [<81af76d4>] ? sysenter_do_call+0x12/0x36

Note that the backtrace suggests that perf was used - and indeed on that testbox i have this in rc.local:

/home/mingo/bin/perf stat true &

... which i forgot about, completely.

If you try 'perf stat true' can you trigger the warning perhaps?

Config attached, for reference.

Thanks,

Ingo

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.1.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set CONFIG_BOOTPARAM_SUPPORT=y CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
# CONFIG_BROKEN_BOOT_ALLOWED2 is not set
CONFIG_BROKEN_BOOT_DISALLOWED=y
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_EXACT=y CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1 CONFIG_RCU_BOOST_DELAY=500
# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=20 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_BOOTPARAM_NO_HZ_OFF is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_BOOTPARAM_HIGHRES_OFF=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP_SUPPORT=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_X86_NUMAQ is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_SUMMIT=y
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
CONFIG_MELAN=y
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VMSPLIT_2G=y
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set

#
# NUMA (Summit) requires SMP, 64GB highmem support, ACPI #
CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set # CONFIG_CLEANCACHE is not set
CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
# CONFIG_ELAN_CPUFREQ is not set
CONFIG_SC520_CPUFREQ=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_E_POWERSAVER=y

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
CONFIG_OLPC=y
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_TS5500=y
CONFIG_TS5500_GPIO=y
# CONFIG_TS5500_LED is not set
# CONFIG_TS5500_ADC is not set
CONFIG_ALIX=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PCMCIA_PROBE=y
# CONFIG_HOTPLUG_PCI is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_TSI57X=y
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_TSI500 is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0=y
# CONFIG_BOOTPARAM_NOLAPIC_TIMER is not set
# CONFIG_BOOTPARAM_LAPIC is not set
# CONFIG_BOOTPARAM_HPET_DISABLE is not set
CONFIG_BOOTPARAM_IDLE_MWAIT=y
CONFIG_BOOTPARAM_IDLE_POLL=y
# CONFIG_BOOTPARAM_HIGHMEM_512M is not set
# CONFIG_BOOTPARAM_NOPAT is not set
# CONFIG_BOOTPARAM_NOTSC is not set
# CONFIG_BOOTPARAM_ACPI_OFF is not set
# CONFIG_BOOTPARAM_PCI_NOMSI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=y CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_ECN is not set
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
# CONFIG_BRIDGE_EBT_ARP is not set
CONFIG_BRIDGE_EBT_IP=y
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
CONFIG_BRIDGE_EBT_STP=y
# CONFIG_BRIDGE_EBT_VLAN is not set
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not set
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
# CONFIG_SCC is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_BAYCOM_PAR is not set
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=y
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=y
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
CONFIG_BT_SCO=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y

#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
# CONFIG_NFC_PN533 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_SPI=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_INTEL_MID_PTI=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline #
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=y
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set CONFIG_SMC9194=y
# CONFIG_ENC28J60 is not set CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
CONFIG_NI65=y
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=y
CONFIG_NET_ISA=y
CONFIG_E2100=y
CONFIG_EWRK3=y
CONFIG_EEXPRESS=y
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN is not set
CONFIG_LP486E=y
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_NE2_MCA is not set
# CONFIG_IBMLANA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=y
# CONFIG_KSZ884X_PCI is not set CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_NE3210=y
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
# CONFIG_KS8842 is not set
CONFIG_KS8851=y
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
# CONFIG_HAMACHI is not set CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_DA is not set CONFIG_STMMAC_DUAL_MAC=y
# CONFIG_PCH_GBE is not set CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set CONFIG_CHELSIO_T4VF=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=y
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
# CONFIG_QLGE is not set
CONFIG_BNA=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=y
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_IEEE802154_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
# CONFIG_RIONET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
CONFIG_MOUSE_PC110PAD=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_AD714X_SPI is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y CONFIG_SERIAL_MAX3107=y CONFIG_SERIAL_MFD_HSU=y CONFIG_SERIAL_MFD_HSU_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set # CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y
# CONFIG_DTLK is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options. #
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_DEBUG is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
# CONFIG_DVB_NET is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=y
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=y
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=y

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=y

#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=y

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV6110x=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
# CONFIG_DVB_TDA18271C2DD is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set
CONFIG_DVB_S5H1420=y
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
# CONFIG_DVB_MT352 is not set
CONFIG_DVB_ZL10353=y
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_CXD2820R=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
# CONFIG_DVB_ISL6423 is not set
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=y
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWII_FF=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_COMMON=y
CONFIG_HID_ROCCAT_ARVO=y
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
CONFIG_HID_ROCCAT_KOVAPLUS=y
CONFIG_HID_ROCCAT_PYRA=y
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_FUSB300=y
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_CI13XXX_PCI is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_LANGWELL is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=y
CONFIG_USB_FILE_STORAGE_TEST=y
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
# CONFIG_UWB_HWA is not set
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACERHDF=y
CONFIG_ASUS_LAPTOP=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_HP_ACCEL=y
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_INTEL_IOMMU is not set
CONFIG_VIRT_DRIVERS=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not set
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_BASE=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY_DMESG_RESTRICT=y CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#8 lore raw
Quoted 152 lines · Ingo Molnar
Quoted 100 lines · Paul E. McKenney
Quoted 99 lines · Paul E. McKenney
Quoted 94 lines · Ingo Molnar
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36
Quoted 1 line

Config and full bootlog attached.

Hello, Ingo,

Quoted 7 lines
Quoted 5 lines

It appears that inlining has defeated me, so I tried reproducing under KVM, using the closest bootable approximation to your .config (attached). I booted ten times without seeing this error. I have my changes against 3.1-rc8. I will try against 3.1, but in the meantime any enlightenment would be most welcome. ;-)

And I cannot reproduce after merging into 3.1. :-(

Here's another one i just got with latest -tip:

PM: Adding info for No Bus:vcsa2

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
 [<81abe239>] ? printk+0x18/0x1a
 [<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
 [<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<8108cca8>] perf_event_comm+0x18/0x60
 [<810d1abd>] ? set_task_comm+0x5d/0x80
 [<81af622d>] ? _raw_spin_unlock+0x1d/0x40
 [<810d1ac4>] set_task_comm+0x64/0x80
 [<810d25fd>] setup_new_exec+0xbd/0x1d0
 [<810d1b61>] ? flush_old_exec+0x81/0xa0
 [<8110753e>] load_elf_binary+0x28e/0xa00
 [<810d2101>] ? search_binary_handler+0xd1/0x1d0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<811072b0>] ? load_elf_library+0x260/0x260
 [<810d2108>] search_binary_handler+0xd8/0x1d0
 [<810d2060>] ? search_binary_handler+0x30/0x1d0
 [<810d242f>] do_execve_common+0x22f/0x2a0
 [<810d24b2>] do_execve+0x12/0x20
 [<81009592>] sys_execve+0x32/0x70
 [<81af7752>] ptregs_execve+0x12/0x20
 [<81af76d4>] ? sysenter_do_call+0x12/0x36
Quoted 8 lines

Note that the backtrace suggests that perf was used - and indeed on that testbox i have this in rc.local:

/home/mingo/bin/perf stat true &

... which i forgot about, completely.

If you try 'perf stat true' can you trigger the warning perhaps?

Ah! I will install this into my KVM image and see what happens. Your /home/mingo/bin/perf is a script that does "perf stat true" in a loop?

Thanx, Paul

Quoted 3,353 lines

Config attached, for reference.

Thanks,

Ingo

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.1.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED is not set CONFIG_BOOTPARAM_SUPPORT=y CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
# CONFIG_BROKEN_BOOT_ALLOWED2 is not set
CONFIG_BROKEN_BOOT_DISALLOWED=y
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_EXACT=y CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1 CONFIG_RCU_BOOST_DELAY=500
# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=20 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_BOOTPARAM_NO_HZ_OFF is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_BOOTPARAM_HIGHRES_OFF=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP_SUPPORT=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_X86_NUMAQ is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_SUMMIT=y
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
CONFIG_MELAN=y
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VMSPLIT_2G=y
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set

#
# NUMA (Summit) requires SMP, 64GB highmem support, ACPI #
CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set # CONFIG_CLEANCACHE is not set
CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="" CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
# CONFIG_ELAN_CPUFREQ is not set
CONFIG_SC520_CPUFREQ=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_E_POWERSAVER=y

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
CONFIG_OLPC=y
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_TS5500=y
CONFIG_TS5500_GPIO=y
# CONFIG_TS5500_LED is not set
# CONFIG_TS5500_ADC is not set
CONFIG_ALIX=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PCMCIA_PROBE=y
# CONFIG_HOTPLUG_PCI is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_TSI57X=y
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_TSI500 is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0=y
# CONFIG_BOOTPARAM_NOLAPIC_TIMER is not set
# CONFIG_BOOTPARAM_LAPIC is not set
# CONFIG_BOOTPARAM_HPET_DISABLE is not set
CONFIG_BOOTPARAM_IDLE_MWAIT=y
CONFIG_BOOTPARAM_IDLE_POLL=y
# CONFIG_BOOTPARAM_HIGHMEM_512M is not set
# CONFIG_BOOTPARAM_NOPAT is not set
# CONFIG_BOOTPARAM_NOTSC is not set
# CONFIG_BOOTPARAM_ACPI_OFF is not set
# CONFIG_BOOTPARAM_PCI_NOMSI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=y CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_ECN is not set
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
# CONFIG_BRIDGE_EBT_ARP is not set
CONFIG_BRIDGE_EBT_IP=y
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
CONFIG_BRIDGE_EBT_STP=y
# CONFIG_BRIDGE_EBT_VLAN is not set
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not set
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
# CONFIG_SCC is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_BAYCOM_PAR is not set
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=y
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
CONFIG_SMC_IRCC_FIR=y
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=y
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
CONFIG_BT_SCO=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y

#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
# CONFIG_NFC_PN533 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_SPI=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_INTEL_MID_PTI=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline #
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=y
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set CONFIG_SMC9194=y
# CONFIG_ENC28J60 is not set CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
CONFIG_NI65=y
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=y
CONFIG_NET_ISA=y
CONFIG_E2100=y
CONFIG_EWRK3=y
CONFIG_EEXPRESS=y
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN is not set
CONFIG_LP486E=y
# CONFIG_ETH16I is not set
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_NE2_MCA is not set
# CONFIG_IBMLANA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=y
# CONFIG_KSZ884X_PCI is not set CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_NE3210=y
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
# CONFIG_KS8842 is not set
CONFIG_KS8851=y
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
# CONFIG_HAMACHI is not set CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_DA is not set CONFIG_STMMAC_DUAL_MAC=y
# CONFIG_PCH_GBE is not set CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set CONFIG_CHELSIO_T4VF=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=y
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
# CONFIG_QLGE is not set
CONFIG_BNA=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers #

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=y
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_IEEE802154_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
# CONFIG_RIONET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
CONFIG_MOUSE_PC110PAD=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_AD714X_SPI is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y CONFIG_SERIAL_MAX3107=y CONFIG_SERIAL_MFD_HSU=y CONFIG_SERIAL_MFD_HSU_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set # CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set CONFIG_SERIAL_PCH_UART=y
# CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y
# CONFIG_DTLK is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options. #
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_DEBUG is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
# CONFIG_DVB_NET is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=y
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=y
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=y

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=y

#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=y

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV6110x=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
# CONFIG_DVB_TDA18271C2DD is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set
CONFIG_DVB_S5H1420=y
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
# CONFIG_DVB_MT352 is not set
CONFIG_DVB_ZL10353=y
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_CXD2820R=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
# CONFIG_DVB_ISL6423 is not set
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=y
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWII_FF=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_COMMON=y
CONFIG_HID_ROCCAT_ARVO=y
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
CONFIG_HID_ROCCAT_KOVAPLUS=y
CONFIG_HID_ROCCAT_PYRA=y
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_FUSB300=y
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_CI13XXX_PCI is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_LANGWELL is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=y
CONFIG_USB_FILE_STORAGE_TEST=y
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
# CONFIG_UWB_HWA is not set
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACERHDF=y
CONFIG_ASUS_LAPTOP=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_HP_ACCEL=y
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_INTEL_IOMMU is not set
CONFIG_VIRT_DRIVERS=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not set
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_BASE=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY_DMESG_RESTRICT=y CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

#9 lore raw
Quoted 158 lines · Paul E. McKenney
Quoted 157 lines · Ingo Molnar
Quoted 100 lines · Paul E. McKenney
Quoted 99 lines · Paul E. McKenney
Quoted 94 lines · Ingo Molnar
Quoted 44 lines · Paul E. McKenney
Quoted 2 lines · Ingo Molnar

Not sure whether you've seen this one already:

This is a new one for me.

Quoted 13 lines
[   18.110320] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   31.803721] 
[   31.804597] ===============================
[   31.804597] [ INFO: suspicious RCU usage. ]
[   31.804597] -------------------------------
[   31.804597] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   31.804597] 
[   31.804597] other info that might help us debug this:
[   31.804597] 
[   31.804597] 
[   31.804597] rcu_scheduler_active = 1, debug_locks = 0
[   31.804597] 1 lock held by true/845:
[   31.804597]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<4109f06f>] prepare_bprm_creds+0x20/0x55
Quoted 8 lines
[   31.804597] 
[   31.804597] stack backtrace:
[   31.804597] Pid: 845, comm: true Not tainted 3.1.0-rc8-tip-01699-gde204a2-dirty #157471
[   31.804597] Call Trace:
[   31.804597]  [<412d78fa>] ? printk+0x18/0x1a
[   31.804597]  [<41044190>] lockdep_rcu_suspicious+0xb1/0xb9
[   31.804597]  [<4106d6de>] perf_event_comm+0xb1/0x357
[   31.804597]  [<4109f048>] set_task_comm+0x4d/0x54

This one does task_lock(), which acquires the task's ->alloc lock. In theory, this should prevent the lockdep-RCU splat. It clearly does not, and here are some possible reasons why:

1. Something redirects to some other task along the way.

2. Something releases ->alloc_lock along the way.

The output above shows no locks held, which points to #2.

set_task_comm() calls perf_event_comm() shown above, which calls perf_event_comm_event(), which does rcu_read_lock(), which should also prevent the splat. Then perf_event_comm_event() calls perf_event_comm_ctx(), which calls perf_event_comm_output()...

Quoted 5 lines

Holy inlining, Batman!!!

OK, I confess, I am a wuss... Any chance of reproducing this with CONFIG_SCHED_OMIT_FRAME_POINTER=n? Or would someone more familiar with these functions be willing to enlighten me?

Ok, i ran the tests some more and here's a similar splat with framepointers enabled:

[   50.402719] eth0: no IPv6 routers present
[   59.147572] 
[   59.149064] ===============================
[   59.151257] [ INFO: suspicious RCU usage. ]
[   59.156865] -------------------------------
[   59.156865] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[   59.156865] 
[   59.156865] other info that might help us debug this:
[   59.156865] 
[   59.156865] 
[   59.156865] rcu_scheduler_active = 1, debug_locks = 0
[   59.156865] 1 lock held by true/667:
[   59.156865]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c111d927>] prepare_bprm_creds+0x27/0x70
[   59.156865] 
[   59.156865] stack backtrace:
[   59.156865] Pid: 667, comm: true Not tainted 3.1.0-rc8-tip+ #157499
[   59.156865] Call Trace:
[   59.156865]  [<c1a41f7c>] ? printk+0x28/0x2a
[   59.156865]  [<c109d540>] lockdep_rcu_suspicious+0xc0/0xd0
[   59.156865]  [<c10d8a98>] perf_event_enable_on_exec+0x1c8/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c10daef8>] perf_event_comm+0x18/0x60
[   59.156865]  [<c111d80d>] ? set_task_comm+0x5d/0x80
[   59.156865]  [<c1a6ac6d>] ? _raw_spin_unlock+0x1d/0x30
[   59.156865]  [<c111d814>] set_task_comm+0x64/0x80
[   59.156865]  [<c111e355>] setup_new_exec+0xc5/0x1f0
[   59.156865]  [<c115313b>] load_elf_binary+0x28b/0xa00
[   59.156865]  [<c111de59>] ? search_binary_handler+0xd9/0x1d0
[   59.156865]  [<c109c364>] ? __lock_release+0x54/0xd0
[   59.156865]  [<c1152eb0>] ? do_mmap+0x60/0x60
[   59.156865]  [<c111de60>] search_binary_handler+0xe0/0x1d0
[   59.156865]  [<c111ddb0>] ? search_binary_handler+0x30/0x1d0
[   59.156865]  [<c111e17f>] do_execve_common+0x22f/0x2a0
[   59.156865]  [<c111e202>] do_execve+0x12/0x20
[   59.156865]  [<c1036462>] sys_execve+0x32/0x70
[   59.156865]  [<c1a6c052>] ptregs_execve+0x12/0x18
[   59.156865]  [<c1a6bfd7>] ? sysenter_do_call+0x12/0x36
Quoted 1 line

Config and full bootlog attached.

Hello, Ingo,

Quoted 7 lines
Quoted 5 lines

It appears that inlining has defeated me, so I tried reproducing under KVM, using the closest bootable approximation to your .config (attached). I booted ten times without seeing this error. I have my changes against 3.1-rc8. I will try against 3.1, but in the meantime any enlightenment would be most welcome. ;-)

And I cannot reproduce after merging into 3.1. :-(

Here's another one i just got with latest -tip:

PM: Adding info for No Bus:vcsa2

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
 [<81abe239>] ? printk+0x18/0x1a
 [<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
 [<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<8108cca8>] perf_event_comm+0x18/0x60
 [<810d1abd>] ? set_task_comm+0x5d/0x80
 [<81af622d>] ? _raw_spin_unlock+0x1d/0x40
 [<810d1ac4>] set_task_comm+0x64/0x80
 [<810d25fd>] setup_new_exec+0xbd/0x1d0
 [<810d1b61>] ? flush_old_exec+0x81/0xa0
 [<8110753e>] load_elf_binary+0x28e/0xa00
 [<810d2101>] ? search_binary_handler+0xd1/0x1d0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<811072b0>] ? load_elf_library+0x260/0x260
 [<810d2108>] search_binary_handler+0xd8/0x1d0
 [<810d2060>] ? search_binary_handler+0x30/0x1d0
 [<810d242f>] do_execve_common+0x22f/0x2a0
 [<810d24b2>] do_execve+0x12/0x20
 [<81009592>] sys_execve+0x32/0x70
 [<81af7752>] ptregs_execve+0x12/0x20
 [<81af76d4>] ? sysenter_do_call+0x12/0x36

Note that the backtrace suggests that perf was used - and indeed on that testbox i have this in rc.local:

/home/mingo/bin/perf stat true &

Quoted 7 lines
Quoted 3 lines

... which i forgot about, completely.

If you try 'perf stat true' can you trigger the warning perhaps?

Ah! I will install this into my KVM image and see what happens. Your /home/mingo/bin/perf is a script that does "perf stat true" in a loop?

no, it's just plain 'perf' installed locally.

Thanks,

Ingo

#10 lore raw
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
Quoted 2 lines

And I cannot reproduce after merging into 3.1. :-(

Here's another one i just got with latest -tip:

PM: Adding info for No Bus:vcsa2

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
 [<81abe239>] ? printk+0x18/0x1a
 [<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
 [<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<8108cca8>] perf_event_comm+0x18/0x60
 [<810d1abd>] ? set_task_comm+0x5d/0x80

void set_task_comm(struct task_struct *tsk, char *buf)

{
        task_lock(tsk);
	...
        task_unlock(tsk);
        perf_event_comm(tsk);
}

see, perf_event_comm() is called after releasing task_lock.

perf_event_comm()
perf_event_enable_on_exec()
perf_cgroup_sched_out()
perf_cgroup_from_task()
task_subsys_state()

No proper lock is held, hence the warning.

Quoted 31 lines
Quoted 21 lines
Quoted 21 lines

[<81af622d>] ? _raw_spin_unlock+0x1d/0x40

 [<810d1ac4>] set_task_comm+0x64/0x80
 [<810d25fd>] setup_new_exec+0xbd/0x1d0
 [<810d1b61>] ? flush_old_exec+0x81/0xa0
 [<8110753e>] load_elf_binary+0x28e/0xa00
 [<810d2101>] ? search_binary_handler+0xd1/0x1d0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<811072b0>] ? load_elf_library+0x260/0x260
 [<810d2108>] search_binary_handler+0xd8/0x1d0
 [<810d2060>] ? search_binary_handler+0x30/0x1d0
 [<810d242f>] do_execve_common+0x22f/0x2a0
 [<810d24b2>] do_execve+0x12/0x20
 [<81009592>] sys_execve+0x32/0x70
 [<81af7752>] ptregs_execve+0x12/0x20
 [<81af76d4>] ? sysenter_do_call+0x12/0x36

Note that the backtrace suggests that perf was used - and indeed on that testbox i have this in rc.local:

/home/mingo/bin/perf stat true &

Quoted 7 lines
Quoted 3 lines

... which i forgot about, completely.

If you try 'perf stat true' can you trigger the warning perhaps?

Ah! I will install this into my KVM image and see what happens. Your /home/mingo/bin/perf is a script that does "perf stat true" in a loop?

no, it's just plain 'perf' installed locally.

#11 lore raw
Quoted 39 lines · Li Zefan
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
Quoted 2 lines

And I cannot reproduce after merging into 3.1. :-(

Here's another one i just got with latest -tip:

PM: Adding info for No Bus:vcsa2

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
 [<81abe239>] ? printk+0x18/0x1a
 [<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
 [<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
 [<81063764>] ? __lock_release+0x54/0xb0
 [<8108cca8>] perf_event_comm+0x18/0x60
 [<810d1abd>] ? set_task_comm+0x5d/0x80

void set_task_comm(struct task_struct *tsk, char *buf)

{
        task_lock(tsk);
	...
        task_unlock(tsk);
        perf_event_comm(tsk);
}

see, perf_event_comm() is called after releasing task_lock.

Quoted 7 lines

perf_event_comm()
perf_event_enable_on_exec()
perf_cgroup_sched_out()
perf_cgroup_from_task()
task_subsys_state()

No proper lock is held, hence the warning.

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

This commit fixes this problem by entering an RCU read-side critical section before acquiring the task lock and exiting this critical section after perf_event_comm() returns.

fs/exec.c +2 -0
index 25dcbe5..fb928d3 100644
@@ -1056,6 +1056,7 @@ EXPORT_SYMBOL_GPL(get_task_comm);
 
 void set_task_comm(struct task_struct *tsk, char *buf)
 {
+	rcu_read_lock(); /* protect task pointer through tracing. */
 	task_lock(tsk);
 
 	/*
@@ -1069,6 +1070,7 @@ void set_task_comm(struct task_struct *tsk, char *buf)
 	strlcpy(tsk->comm, buf, sizeof(tsk->comm));
 	task_unlock(tsk);
 	perf_event_comm(tsk);
+	rcu_read_unlock();
 }
 
 int flush_old_exec(struct linux_binprm * bprm)
#12 lore raw

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 46 lines

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36
Quoted 6 lines

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

# mount -t cgroup -o perf_event xxx /mnt
# ./perf record -a -e 'sched:*' -G / true
[  171.603171] ===============================
[  171.603173] [ INFO: suspicious RCU usage. ]
[  171.603175] -------------------------------
[  171.603178] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[  171.603180] 
[  171.603181] other info that might help us debug this:
[  171.603182] 
[  171.603184] 
[  171.603185] rcu_scheduler_active = 1, debug_locks = 0
[  171.603188] 2 locks held by perf/2899:
[  171.603190]  #0:  (&cpuctx_mutex){+.+...}, at: [<c04b2fe7>] sys_perf_event_open+0x4ed/0x62a
[  171.603201]  #1:  (&cpuctx_lock){......}, at: [<c04ac4bc>] perf_ctx_lock+0xe/0x1d
[  171.603210] 
[  171.603211] stack backtrace:
[  171.603214] Pid: 2899, comm: perf Not tainted 3.1.0+ #12
[  171.603216] Call Trace:
[  171.603222]  [<c07e7234>] ? printk+0x25/0x29
[  171.603227]  [<c046279d>] lockdep_rcu_suspicious+0x90/0x9b
[  171.603232]  [<c04ac688>] perf_cgroup_from_task+0x5e/0x64
[  171.603236]  [<c04adfe7>] update_cgrp_time_from_event.clone.18+0x16/0x25
[  171.603240]  [<c04b01a1>] __perf_install_in_context+0xa0/0xcf
[  171.603244]  [<c04ac355>] ? pmu_dev_release+0xa/0xa
[  171.603248]  [<c04ac386>] remote_function+0x31/0x37
[  171.603253]  [<c0468aaa>] smp_call_function_single+0x7d/0xf5
[  171.603257]  [<c04ac41d>] cpu_function_call+0x29/0x2e
[  171.603261]  [<c04b0101>] ? perf_pm_suspend_cpu+0x9f/0x9f
[  171.603264]  [<c04ae85b>] perf_install_in_context+0x53/0x9f
[  171.603268]  [<c04b3033>] sys_perf_event_open+0x539/0x62a
[  171.603273]  [<c04566f5>] ? up_read+0x1b/0x2e
[  171.603277]  [<c07ec856>] ? do_page_fault+0x2e6/0x314
[  171.603283]  [<c07ef2df>] sysenter_do_call+0x12/0x38
Quoted 28 lines

This commit fixes this problem by entering an RCU read-side critical section before acquiring the task lock and exiting this critical section after perf_event_comm() returns.

fs/exec.c +2 -0
index 25dcbe5..fb928d3 100644
@@ -1056,6 +1056,7 @@ EXPORT_SYMBOL_GPL(get_task_comm);
 
 void set_task_comm(struct task_struct *tsk, char *buf)
 {
+	rcu_read_lock(); /* protect task pointer through tracing. */
 	task_lock(tsk);
 
 	/*
@@ -1069,6 +1070,7 @@ void set_task_comm(struct task_struct *tsk, char *buf)
 	strlcpy(tsk->comm, buf, sizeof(tsk->comm));
 	task_unlock(tsk);
 	perf_event_comm(tsk);
+	rcu_read_unlock();
 }
 
 int flush_old_exec(struct linux_binprm * bprm)
#13 lore raw
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 46 lines

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36
Quoted 6 lines

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation. What patch would you propose?

Thanx, Paul

Quoted 64 lines
# mount -t cgroup -o perf_event xxx /mnt
# ./perf record -a -e 'sched:*' -G / true
[  171.603171] ===============================
[  171.603173] [ INFO: suspicious RCU usage. ]
[  171.603175] -------------------------------
[  171.603178] include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!
[  171.603180] 
[  171.603181] other info that might help us debug this:
[  171.603182] 
[  171.603184] 
[  171.603185] rcu_scheduler_active = 1, debug_locks = 0
[  171.603188] 2 locks held by perf/2899:
[  171.603190]  #0:  (&cpuctx_mutex){+.+...}, at: [<c04b2fe7>] sys_perf_event_open+0x4ed/0x62a
[  171.603201]  #1:  (&cpuctx_lock){......}, at: [<c04ac4bc>] perf_ctx_lock+0xe/0x1d
[  171.603210] 
[  171.603211] stack backtrace:
[  171.603214] Pid: 2899, comm: perf Not tainted 3.1.0+ #12
[  171.603216] Call Trace:
[  171.603222]  [<c07e7234>] ? printk+0x25/0x29
[  171.603227]  [<c046279d>] lockdep_rcu_suspicious+0x90/0x9b
[  171.603232]  [<c04ac688>] perf_cgroup_from_task+0x5e/0x64
[  171.603236]  [<c04adfe7>] update_cgrp_time_from_event.clone.18+0x16/0x25
[  171.603240]  [<c04b01a1>] __perf_install_in_context+0xa0/0xcf
[  171.603244]  [<c04ac355>] ? pmu_dev_release+0xa/0xa
[  171.603248]  [<c04ac386>] remote_function+0x31/0x37
[  171.603253]  [<c0468aaa>] smp_call_function_single+0x7d/0xf5
[  171.603257]  [<c04ac41d>] cpu_function_call+0x29/0x2e
[  171.603261]  [<c04b0101>] ? perf_pm_suspend_cpu+0x9f/0x9f
[  171.603264]  [<c04ae85b>] perf_install_in_context+0x53/0x9f
[  171.603268]  [<c04b3033>] sys_perf_event_open+0x539/0x62a
[  171.603273]  [<c04566f5>] ? up_read+0x1b/0x2e
[  171.603277]  [<c07ec856>] ? do_page_fault+0x2e6/0x314
[  171.603283]  [<c07ef2df>] sysenter_do_call+0x12/0x38
Quoted 28 lines

This commit fixes this problem by entering an RCU read-side critical section before acquiring the task lock and exiting this critical section after perf_event_comm() returns.

fs/exec.c +2 -0
index 25dcbe5..fb928d3 100644
@@ -1056,6 +1056,7 @@ EXPORT_SYMBOL_GPL(get_task_comm);
 
 void set_task_comm(struct task_struct *tsk, char *buf)
 {
+	rcu_read_lock(); /* protect task pointer through tracing. */
 	task_lock(tsk);
 
 	/*
@@ -1069,6 +1070,7 @@ void set_task_comm(struct task_struct *tsk, char *buf)
 	strlcpy(tsk->comm, buf, sizeof(tsk->comm));
 	task_unlock(tsk);
 	perf_event_comm(tsk);
+	rcu_read_unlock();
 }
 
 int flush_old_exec(struct linux_binprm * bprm)
#14 lore raw

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation. What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

- in perf_cgroup_switch():

	 cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

---

kernel/events/core.c +13 -0
index d1a1bee..f5e05ce 100644
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
 	if (!is_cgroup_event(event))
 		return;
 
+	rcu_read_lock();
 	cgrp = perf_cgroup_from_task(current);
+	rcu_read_unlock();
+
 	/*
 	 * Do not update time when cgroup is not active
 	 */
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
 	if (!task || !ctx->nr_cgroups)
 		return;
 
+	rcu_read_lock();
 	cgrp = perf_cgroup_from_task(task);
 	info = this_cpu_ptr(cgrp->info);
 	info->timestamp = ctx->timestamp;
+	rcu_read_unlock();
 }
 
 #define PERF_CGROUP_SWOUT	0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
 	struct perf_cgroup *cgrp1;
 	struct perf_cgroup *cgrp2 = NULL;
 
+	rcu_read_lock();
+
 	/*
 	 * we come here when we know perf_cgroup_events > 0
 	 */
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
 	if (next)
 		cgrp2 = perf_cgroup_from_task(next);
 
+	rcu_read_unlock();
+
 	/*
 	 * only schedule out current cgroup events if we know
 	 * that we are switching to a different cgroup. Otherwise,
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
 	struct perf_cgroup *cgrp1;
 	struct perf_cgroup *cgrp2 = NULL;
 
+	rcu_read_lock();
+
 	/*
 	 * we come here when we know perf_cgroup_events > 0
 	 */
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
 	/* prev can never be NULL */
 	cgrp2 = perf_cgroup_from_task(prev);
 
+	rcu_read_unlock();
+
 	/*
 	 * only need to schedule in cgroup events if we are changing
 	 * cgroup during ctxsw. Cgroup events were not scheduled
#15 lore raw
Quoted 79 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation. What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

Quoted 5 lines

- in perf_cgroup_switch():

	 cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

Looks sane to me, for whatever that might be worth.

Thanx, Paul

Quoted 65 lines

---

kernel/events/core.c +13 -0
index d1a1bee..f5e05ce 100644
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
 	if (!is_cgroup_event(event))
 		return;
 
+	rcu_read_lock();
 	cgrp = perf_cgroup_from_task(current);
+	rcu_read_unlock();
+
 	/*
 	 * Do not update time when cgroup is not active
 	 */
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
 	if (!task || !ctx->nr_cgroups)
 		return;
 
+	rcu_read_lock();
 	cgrp = perf_cgroup_from_task(task);
 	info = this_cpu_ptr(cgrp->info);
 	info->timestamp = ctx->timestamp;
+	rcu_read_unlock();
 }
 
 #define PERF_CGROUP_SWOUT	0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
 	struct perf_cgroup *cgrp1;
 	struct perf_cgroup *cgrp2 = NULL;
 
+	rcu_read_lock();
+
 	/*
 	 * we come here when we know perf_cgroup_events > 0
 	 */
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
 	if (next)
 		cgrp2 = perf_cgroup_from_task(next);
 
+	rcu_read_unlock();
+
 	/*
 	 * only schedule out current cgroup events if we know
 	 * that we are switching to a different cgroup. Otherwise,
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
 	struct perf_cgroup *cgrp1;
 	struct perf_cgroup *cgrp2 = NULL;
 
+	rcu_read_lock();
+
 	/*
 	 * we come here when we know perf_cgroup_events > 0
 	 */
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
 	/* prev can never be NULL */
 	cgrp2 = perf_cgroup_from_task(prev);
 
+	rcu_read_unlock();
+
 	/*
 	 * only need to schedule in cgroup events if we are changing
 	 * cgroup during ctxsw. Cgroup events were not scheduled
#16 lore raw

Hi,

Sorry for the delay, I was on vacation and travelling. I will look at your proposed patch tomorrow. I ran into this warning myself recently. There is a cgroup dependency of task_lock(). On context switch, we do need to check the outgoing and incoming cgroups to check if we need to stop/start cgroup events in perf_events.

Quoted 157 lines · Paul E. McKenney
Quoted 79 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis.  Does the following patch fix this problem?

                                                  Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation.  What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

Quoted 5 lines

- in perf_cgroup_switch():

       cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

Looks sane to me, for whatever that might be worth.

                                                               Thanx, Paul

Quoted 65 lines

---

kernel/events/core.c +13 -0
index d1a1bee..f5e05ce 100644
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
       if (!is_cgroup_event(event))
               return;
 
+     rcu_read_lock();
       cgrp = perf_cgroup_from_task(current);
+     rcu_read_unlock();
+
       /*
        * Do not update time when cgroup is not active
        */
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
       if (!task || !ctx->nr_cgroups)
               return;
 
+     rcu_read_lock();
       cgrp = perf_cgroup_from_task(task);
       info = this_cpu_ptr(cgrp->info);
       info->timestamp = ctx->timestamp;
+     rcu_read_unlock();
  }
 
  #define PERF_CGROUP_SWOUT    0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
       struct perf_cgroup *cgrp1;
       struct perf_cgroup *cgrp2 = NULL;
 
+     rcu_read_lock();
+
       /*
        * we come here when we know perf_cgroup_events > 0
        */
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
       if (next)
               cgrp2 = perf_cgroup_from_task(next);
 
+     rcu_read_unlock();
+
       /*
        * only schedule out current cgroup events if we know
        * that we are switching to a different cgroup. Otherwise,
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
       struct perf_cgroup *cgrp1;
       struct perf_cgroup *cgrp2 = NULL;
 
+     rcu_read_lock();
+
       /*
        * we come here when we know perf_cgroup_events > 0
        */
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
       /* prev can never be NULL */
       cgrp2 = perf_cgroup_from_task(prev);
 
+     rcu_read_unlock();
+
       /*
        * only need to schedule in cgroup events if we are changing
        * cgroup during ctxsw. Cgroup events were not scheduled
#17 lore raw
In reply to Li Zefan

Paul,

Quoted 73 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis.  Does the following patch fix this problem?

                                                    Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation.  What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

Quoted 6 lines

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

We don't retrieve the task cgroup twice. We retrieve the cgroup for each of the two
tasks: current and prev or next.

I don't understand what you mean by 'between two calls'. Two calls of which function?

Quoted 6 lines

- in perf_cgroup_switch():

        cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

What do you mean by cgroup pinning?

If a task migrates from one cgroup to another, the cgroup code calls ss->attach_task
which ends up in perf_cgroup_attach_task() if the task is currently running on a CPU.
If so perf_cgroup_switch() is eventually called and it will update cpuctx->cgrp. If the
tasks is not running anywhere, then there is nothing to do, state will be updated when
the task is scheduled back in.

Quoted 65 lines

---

kernel/events/core.c +13 -0
index d1a1bee..f5e05ce 100644
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
        if (!is_cgroup_event(event))
                return;
 
+       rcu_read_lock();
        cgrp = perf_cgroup_from_task(current);
+       rcu_read_unlock();
+
        /*
         * Do not update time when cgroup is not active
         */
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
        if (!task || !ctx->nr_cgroups)
                return;
 
+       rcu_read_lock();
        cgrp = perf_cgroup_from_task(task);
        info = this_cpu_ptr(cgrp->info);
        info->timestamp = ctx->timestamp;
+       rcu_read_unlock();
  }
 
  #define PERF_CGROUP_SWOUT      0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
        struct perf_cgroup *cgrp1;
        struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
        /*
         * we come here when we know perf_cgroup_events > 0
         */
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
        if (next)
                cgrp2 = perf_cgroup_from_task(next);
 
+       rcu_read_unlock();
+
        /*
         * only schedule out current cgroup events if we know
         * that we are switching to a different cgroup. Otherwise,
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
        struct perf_cgroup *cgrp1;
        struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
        /*
         * we come here when we know perf_cgroup_events > 0
         */
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
        /* prev can never be NULL */
        cgrp2 = perf_cgroup_from_task(prev);
 
+       rcu_read_unlock();
+
        /*
         * only need to schedule in cgroup events if we are changing
         * cgroup during ctxsw. Cgroup events were not scheduled
#18 lore raw
Quoted 82 lines · Stephane Eranian

Paul,

Quoted 73 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis. Does the following patch fix this problem?

Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0: (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation. What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

Quoted 6 lines

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

Quoted 7 lines

We don't retrieve the task cgroup twice. We retrieve the cgroup for each of the two
tasks: current and prev or next.

I don't understand what you mean by 'between two calls'. Two calls of which function?

perf_cgroup_sched_out(task, next)

{
	cgrp1 = perf_cgroup_from_task(task);
	...
	perf_cgroup_switch(task, PERF_CGROUP_SWOUT);
}

perf_cgroup_switch(task)

{
	...
	cpuctx->cgrp = perf_cgroup_from_task(task);
}

So we call perf_cgroup_from_task() twice on @task. Just want to be sure the code is not problematic.

Quoted 8 lines
Quoted 6 lines

- in perf_cgroup_switch():

        cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

What do you mean by cgroup pinning?

Quoted 10 lines

If a task migrates from one cgroup to another, the cgroup code calls ss->attach_task
which ends up in perf_cgroup_attach_task() if the task is currently running on a CPU.
If so perf_cgroup_switch() is eventually called and it will update cpuctx->cgrp. If the
tasks is not running anywhere, then there is nothing to do, state will be updated when
the task is scheduled back in.

Thanks for clarification!

#19 lore raw
Quoted 98 lines · Li Zefan
Quoted 82 lines · Stephane Eranian

Paul,

Quoted 73 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis.  Does the following patch fix this problem?

                                                    Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation.  What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

Quoted 6 lines

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

Quoted 7 lines

We don't retrieve the task cgroup twice. We retrieve the cgroup for each of the two
tasks: current and prev or next.

I don't understand what you mean by 'between two calls'. Two calls of which function?

perf_cgroup_sched_out(task, next)
{
       cgrp1 = perf_cgroup_from_task(task);
       ...
       perf_cgroup_switch(task, PERF_CGROUP_SWOUT); }

Quoted 6 lines

perf_cgroup_switch(task)
{
       ...
       cpuctx->cgrp = perf_cgroup_from_task(task); }

Ok, yes it may happen that we call it twice.

I tested your patch and it looks good to me. I would make the following adjustments though:
- perf_cgroup_set_timestamp(), move rcu_read_unlock() before info->timestamp = as it is not needed
for this statement.

Quoted 24 lines

So we call perf_cgroup_from_task() twice on @task. Just want to be sure the code is not problematic.

Quoted 8 lines
Quoted 6 lines

- in perf_cgroup_switch():

        cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

What do you mean by cgroup pinning?

Quoted 10 lines

If a task migrates from one cgroup to another, the cgroup code calls ss->attach_task
which ends up in perf_cgroup_attach_task() if the task is currently running on a CPU.
If so perf_cgroup_switch() is eventually called and it will update cpuctx->cgrp. If the
tasks is not running anywhere, then there is nothing to do, state will be updated when
the task is scheduled back in.

Thanks for clarification!

#20 lore raw

Hi,

Some second thoughts on this.

We get the warning because:

#define task_subsys_state_check(task, subsys_id, __c)                   \
        rcu_dereference_check(task->cgroups->subsys[subsys_id],         \
                              lockdep_is_held(&task->alloc_lock) ||     \
                              cgroup_lock_is_held() || (__c))

In other words, we need the alloc_lock held.

What I don't quite understand in your patch in the connection between rcu and this particular task lock. Unless holding the rcu read lock implies you necessarily hold the alloc_lock.

Can you explain?

Quoted 139 lines · Stephane Eranian
Quoted 98 lines · Li Zefan
Quoted 82 lines · Stephane Eranian

Paul,

Quoted 73 lines · Li Zefan

(I shoud have cced Stephane Eranian instead of Turner..)

Quoted 56 lines · Paul E. McKenney
Quoted 55 lines · Li Zefan

(Let's cc Peter and Paul Turner for this perf cgroup issue.)

Quoted 52 lines

Thank you for the analysis.  Does the following patch fix this problem?

                                                    Thanx, Paul

------------------------------------------------------------------------

fs: Add RCU protection in set_task_comm()

Running "perf stat true" results in the following RCU-lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
-------------------------------
include/linux/cgroup.h:548 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by true/655:
#0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<810d1bd7>] prepare_bprm_creds+0x27/0x70

stack backtrace:
Pid: 655, comm: true Not tainted 3.1.0-tip-01868-g1271bd2-dirty #161079
Call Trace:
[<81abe239>] ? printk+0x18/0x1a
[<81064920>] lockdep_rcu_suspicious+0xc0/0xd0
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
[<810d25fd>] setup_new_exec+0xbd/0x1d0
[<810d1b61>] ? flush_old_exec+0x81/0xa0
[<8110753e>] load_elf_binary+0x28e/0xa00
[<810d2101>] ? search_binary_handler+0xd1/0x1d0
[<81063764>] ? __lock_release+0x54/0xb0
[<811072b0>] ? load_elf_library+0x260/0x260
[<810d2108>] search_binary_handler+0xd8/0x1d0
[<810d2060>] ? search_binary_handler+0x30/0x1d0
[<810d242f>] do_execve_common+0x22f/0x2a0
[<810d24b2>] do_execve+0x12/0x20
[<81009592>] sys_execve+0x32/0x70
[<81af7752>] ptregs_execve+0x12/0x20
[<81af76d4>] ? sysenter_do_call+0x12/0x36

Li Zefan noted that this is due to set_task_comm() dropping the task lock before invoking perf_event_comm(), which could in fact result in the task being freed up before perf_event_comm() completed tracing in the case where one task invokes set_task_comm() on another task -- which actually does occur via comm_write(), which can be invoked via /proc.

Quoted 9 lines
Quoted 5 lines

This is not true. The caller should ensure @tsk is valid during set_task_comm().

The warning comes from perf_cgroup_from_task(). We can trigger this warning in some other cases where perf cgroup is used, for example:

I must defer to your greater knowledge of this situation.  What patch would you propose?

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

Quoted 6 lines

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

Quoted 7 lines

We don't retrieve the task cgroup twice. We retrieve the cgroup for each of the two
tasks: current and prev or next.

I don't understand what you mean by 'between two calls'. Two calls of which function?

perf_cgroup_sched_out(task, next)
{
       cgrp1 = perf_cgroup_from_task(task);
       ...
       perf_cgroup_switch(task, PERF_CGROUP_SWOUT); }

Quoted 6 lines

perf_cgroup_switch(task)
{
       ...
       cpuctx->cgrp = perf_cgroup_from_task(task); }

Ok, yes it may happen that we call it twice.

I tested your patch and it looks good to me. I would make the following adjustments though:
- perf_cgroup_set_timestamp(), move rcu_read_unlock() before info->timestamp = as it is not needed
 for this statement.

Quoted 24 lines

So we call perf_cgroup_from_task() twice on @task. Just want to be sure the code is not problematic.

Quoted 8 lines
Quoted 6 lines

- in perf_cgroup_switch():

        cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

What do you mean by cgroup pinning?

Quoted 10 lines

If a task migrates from one cgroup to another, the cgroup code calls ss->attach_task
which ends up in perf_cgroup_attach_task() if the task is currently running on a CPU.
If so perf_cgroup_switch() is eventually called and it will update cpuctx->cgrp. If the
tasks is not running anywhere, then there is nothing to do, state will be updated when
the task is scheduled back in.

Thanks for clarification!

#21 lore raw
Quoted 12 lines · Stephane Eranian

Hi,

Some second thoughts on this.

We get the warning because:

#define task_subsys_state_check(task, subsys_id, __c)                   \
        rcu_dereference_check(task->cgroups->subsys[subsys_id],         \
                              lockdep_is_held(&task->alloc_lock) ||     \
                              cgroup_lock_is_held() || (__c))
Quoted 7 lines

In other words, we need the alloc_lock held.

What I don't quite understand in your patch in the connection between rcu and this particular task lock. Unless holding the rcu read lock implies you necessarily hold the alloc_lock.

Can you explain?

#define rcu_dereference_check(p, c) \
	__rcu_dereference_check((p), rcu_read_lock_held() || (c), __rcu)

So if you hold rcu_read_lock(), (c) is not checked/asserted.

#22 lore raw
Quoted 19 lines · Eric Dumazet
Quoted 18 lines · Stephane Eranian

Hi,

Some second thoughts on this.

We get the warning because:

#define task_subsys_state_check(task, subsys_id, __c)                   \
        rcu_dereference_check(task->cgroups->subsys[subsys_id],         \
                              lockdep_is_held(&task->alloc_lock) ||     \
                              cgroup_lock_is_held() || (__c))

In other words, we need the alloc_lock held.

What I don't quite understand in your patch in the connection between rcu and this particular task lock. Unless holding the rcu read lock implies you necessarily hold the alloc_lock.

Quoted 7 lines
Quoted 1 line

Can you explain?

#define rcu_dereference_check(p, c) \
       __rcu_dereference_check((p), rcu_read_lock_held() || (c), __rcu)

So if you hold rcu_read_lock(), (c) is not checked/asserted.

Ok, got it now. I only looked at the lockdep_is_held() part, thus my confusion. Thanks.

Quoted 3 lines
maintainer
#23 lore raw
In reply to Li Zefan

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

Quoted 23 lines · Li Zefan

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

- in perf_cgroup_switch():

         cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

---

kernel/events/core.c +0 -0
index d1a1bee..f5e05ce 100644

kernel/events/core.c static inline void update_cgrp_time_from_event(struct perf_event *event) · line 311

Quoted 10 lines
kernel/events/core.c +3 -0
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
        if (!is_cgroup_event(event))
                return;
 
+       rcu_read_lock();
        cgrp = perf_cgroup_from_task(current);
+       rcu_read_unlock();
+
        /*
         * Do not update time when cgroup is not active
         */

This looks like shutting things up, because what protects the use of cgrp after rcu_read_unlock() ?

Similar to the below, this is a stupid patch to shut things up, no actual problem there, just making a hot path slow.

kernel/events/core.c perf_cgroup_set_timestamp(struct task_struct *task, · line 336

Quoted 10 lines
kernel/events/core.c +2 -0
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
        if (!task || !ctx->nr_cgroups)
                return;
 
+       rcu_read_lock();
        cgrp = perf_cgroup_from_task(task);
        info = this_cpu_ptr(cgrp->info);
        info->timestamp = ctx->timestamp;
+       rcu_read_unlock();
 }

This seems to actually protect the cgrp usage, but is that needed?

It looks to be superfluous, since perf_cgroup_attach_task()->__perf_cgroup_move()->perf_cgroup_switch() will hold ctx->lock when it switches a task from one cgroup to another and perf_cgroup_set_timestamp() should only ever be called while holding the ctx->lock since that is what is used to serialize the timestamps.

Quoted 11 lines
kernel/events/core.c +2 -0
 #define PERF_CGROUP_SWOUT      0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
        struct perf_cgroup *cgrp1;
        struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
        /*
         * we come here when we know perf_cgroup_events > 0
         */

kernel/events/core.c static inline void perf_cgroup_sched_out(struct task_struct *task, · line 432

Quoted 8 lines
kernel/events/core.c +2 -0
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
        if (next)
                cgrp2 = perf_cgroup_from_task(next);
 
+       rcu_read_unlock();
+
        /*
         * only schedule out current cgroup events if we know
         * that we are switching to a different cgroup. Otherwise,

This only hides a warning and leaves a race.

Quoted 11 lines
kernel/events/core.c +2 -0
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
        struct perf_cgroup *cgrp1;
        struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
        /*
         * we come here when we know perf_cgroup_events > 0
         */

kernel/events/core.c static inline void perf_cgroup_sched_in(struct task_struct *prev, · line 459

Quoted 8 lines
kernel/events/core.c +2 -0
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
        /* prev can never be NULL */
        cgrp2 = perf_cgroup_from_task(prev);
 
+       rcu_read_unlock();
+
        /*
         * only need to schedule in cgroup events if we are changing
         * cgroup during ctxsw. Cgroup events were not scheduled

idem.

So no, this patch utterly sucks, it adds code to hot paths just to quiet debug warnings in two cases and the remaining two cases annotates a warning away while leaving an actual problem unfixed.

#24 lore raw
Quoted 5 lines · Peter Zijlstra

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

I think the core issue at stake here is not so much the cgroup disappearing. It cannot go away because it is ref counted (perf_events does the necessary css_get()/css_put()). But it is rather the task disappearing while we are operating
on its state.

I don't think task (prev or next) can disappear while we execute perf_cgroup_sched_out()/perf_cgroup_sched_in() because we are in the context switch code.

What remains is:
* update_cgrp_time_from_event()
alway operates on current task

* perf_cgroup_set_timestamp()

- perf_event_task_tick() -> cpu_ctx_sched_in() but in this case
it is on the current task
- perf_event_task_sched_in() in context switch code so I assume
it is safe
- __perf_event_enable() but it is called on current

- perf_cgroup_switch()
* perf_cgroup_sched_in()/perf_cgroup_sched_out() -> context switch code

* perf_cgroup_attach()
called from cgroup code. Does not appear to hold task_lock(). the routine already grabs the rcu_read_lock() but it that enough
to guarantee the task cannot
vanish. I would hope so, otherwise I think the cgroup attach
code has a problem.

In summary, unless I am mistaken, it looks to me that we may not need those new rcu_read_lock()
calls after all.

Does anyone have a different analysis?

Quoted 110 lines · Li Zefan
Quoted 23 lines

With the following patch, we should see no rcu warning from perf, but as I don't know the internel of perf, I guess we have to defer to Peter and Stephane. ;)

I have two doubts:

- in perf_cgroup_sched_out/in(), we retrieve the task's cgroup twice in the function and it's callee perf_cgroup_switch(), but the task can move to another cgroup between two calls, so they might return two different cgroup pointers. Does it matter?

- in perf_cgroup_switch():

         cpuctx->cgrp = perf_cgroup_from_task(task);

but seems the cgroup is not pinned, so cpuctx->cgrp can be invalid in later use.

---

kernel/events/core.c +0 -0
index d1a1bee..f5e05ce 100644

kernel/events/core.c static inline void update_cgrp_time_from_event(struct perf_event *event) · line 311

Quoted 10 lines
kernel/events/core.c +3 -0
@@ -302,7 +302,10 @@ static inline void update_cgrp_time_from_event(struct perf_event *event)
         if (!is_cgroup_event(event))
                 return;
 
+       rcu_read_lock();
         cgrp = perf_cgroup_from_task(current);
+       rcu_read_unlock();
+
         /*
          * Do not update time when cgroup is not active
          */

This looks like shutting things up, because what protects the use of cgrp after rcu_read_unlock() ?

Similar to the below, this is a stupid patch to shut things up, no actual problem there, just making a hot path slow.

kernel/events/core.c perf_cgroup_set_timestamp(struct task_struct *task, · line 336

Quoted 10 lines
kernel/events/core.c +2 -0
@@ -325,9 +328,11 @@ perf_cgroup_set_timestamp(struct task_struct *task,
         if (!task || !ctx->nr_cgroups)
                 return;
 
+       rcu_read_lock();
         cgrp = perf_cgroup_from_task(task);
         info = this_cpu_ptr(cgrp->info);
         info->timestamp = ctx->timestamp;
+       rcu_read_unlock();
  }

This seems to actually protect the cgrp usage, but is that needed?

It looks to be superfluous, since perf_cgroup_attach_task()->__perf_cgroup_move()->perf_cgroup_switch() will hold ctx->lock when it switches a task from one cgroup to another and perf_cgroup_set_timestamp() should only ever be called while holding the ctx->lock since that is what is used to serialize the timestamps.

Quoted 11 lines
kernel/events/core.c +2 -0
  #define PERF_CGROUP_SWOUT      0x1 /* cgroup switch out every event */
@@ -406,6 +411,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
         struct perf_cgroup *cgrp1;
         struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
         /*
          * we come here when we know perf_cgroup_events > 0
          */

kernel/events/core.c static inline void perf_cgroup_sched_out(struct task_struct *task, · line 432

Quoted 8 lines
kernel/events/core.c +2 -0
@@ -418,6 +425,8 @@ static inline void perf_cgroup_sched_out(struct task_struct *task,
         if (next)
                 cgrp2 = perf_cgroup_from_task(next);
 
+       rcu_read_unlock();
+
         /*
          * only schedule out current cgroup events if we know
          * that we are switching to a different cgroup. Otherwise,

This only hides a warning and leaves a race.

Quoted 11 lines
kernel/events/core.c +2 -0
@@ -433,6 +442,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
         struct perf_cgroup *cgrp1;
         struct perf_cgroup *cgrp2 = NULL;
 
+       rcu_read_lock();
+
         /*
          * we come here when we know perf_cgroup_events > 0
          */

kernel/events/core.c static inline void perf_cgroup_sched_in(struct task_struct *prev, · line 459

Quoted 8 lines
kernel/events/core.c +2 -0
@@ -441,6 +452,8 @@ static inline void perf_cgroup_sched_in(struct task_struct *prev,
         /* prev can never be NULL */
         cgrp2 = perf_cgroup_from_task(prev);
 
+       rcu_read_unlock();
+
         /*
          * only need to schedule in cgroup events if we are changing
          * cgroup during ctxsw. Cgroup events were not scheduled

idem.

So no, this patch utterly sucks, it adds code to hot paths just to quiet debug warnings in two cases and the remaining two cases annotates a warning away while leaving an actual problem unfixed.

maintainer
#25 lore raw
Quoted 12 lines · Stephane Eranian
Quoted 5 lines · Peter Zijlstra

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

I think the core issue at stake here is not so much the cgroup disappearing. It cannot go away because it is ref counted (perf_events does the necessary css_get()/css_put()). But it is rather the task disappearing while we are operating
on its state.

Quoted 3 lines

I don't think task (prev or next) can disappear while we execute perf_cgroup_sched_out()/perf_cgroup_sched_in() because we are in the context switch code.

Right.

Quoted 15 lines

What remains is:
* update_cgrp_time_from_event()
alway operates on current task

* perf_cgroup_set_timestamp()

- perf_event_task_tick() -> cpu_ctx_sched_in() but in this case
it is on the current task
- perf_event_task_sched_in() in context switch code so I assume
it is safe
- __perf_event_enable() but it is called on current

- perf_cgroup_switch()
* perf_cgroup_sched_in()/perf_cgroup_sched_out() -> context switch code

Quoted 6 lines

* perf_cgroup_attach()
called from cgroup code. Does not appear to hold task_lock(). the routine already grabs the rcu_read_lock() but it that enough
to guarantee the task cannot
vanish. I would hope so, otherwise I think the cgroup attach
code has a problem.

yeah, task_struct is rcu-freed

Quoted 5 lines

In summary, unless I am mistaken, it looks to me that we may not need those new rcu_read_lock()
calls after all.

Does anyone have a different analysis?

The only other problem I could see is that perf_cgroup_sched_{in,out} can race against perf_cgroup_attach_task() and make the wrong decision. But then perf_cgroup_attach will call perf_cgroup_switch() to fix that up again.

#26 lore raw
Quoted 34 lines · Peter Zijlstra
Quoted 12 lines · Stephane Eranian
Quoted 5 lines · Peter Zijlstra

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

I think the core issue at stake here is not so much the cgroup disappearing. It cannot go away because it is ref counted (perf_events does the necessary css_get()/css_put()). But it is rather the task disappearing while we are operating
on its state.

Quoted 3 lines

I don't think task (prev or next) can disappear while we execute perf_cgroup_sched_out()/perf_cgroup_sched_in() because we are in the context switch code.

Right.

Quoted 15 lines

What remains is:
* update_cgrp_time_from_event()
alway operates on current task

* perf_cgroup_set_timestamp()

- perf_event_task_tick() -> cpu_ctx_sched_in() but in this case
it is on the current task
- perf_event_task_sched_in() in context switch code so I assume
it is safe
- __perf_event_enable() but it is called on current

- perf_cgroup_switch()
* perf_cgroup_sched_in()/perf_cgroup_sched_out() -> context switch code

Quoted 8 lines
Quoted 6 lines

* perf_cgroup_attach()
called from cgroup code. Does not appear to hold task_lock(). the routine already grabs the rcu_read_lock() but it that enough
to guarantee the task cannot
vanish. I would hope so, otherwise I think the cgroup attach
code has a problem.

yeah, task_struct is rcu-freed

But we are not in an RCU read-side critical section, otherwise the splat would not have happened. Or did I miss a turn in the analysis roadmap above?

Quoted 10 lines
Quoted 5 lines

In summary, unless I am mistaken, it looks to me that we may not need those new rcu_read_lock()
calls after all.

Does anyone have a different analysis?

The only other problem I could see is that perf_cgroup_sched_{in,out} can race against perf_cgroup_attach_task() and make the wrong decision. But then perf_cgroup_attach will call perf_cgroup_switch() to fix that up again.

If this really is a false positive, what should be used to get rid of the splats?

Thanx, Paul

maintainer
#27 lore raw
Quoted 3 lines · Paul E. McKenney

If this really is a false positive, what should be used to get rid of the splats?

Probably something slightly less horrid than the below.. ;-)

---

kernel/events/core.c +1 -1
index d1a1bee..8f05201 100644
@@ -229,7 +229,7 @@ static void perf_ctx_unlock(struct perf_cpu_context *cpuctx,
 static inline struct perf_cgroup *
 perf_cgroup_from_task(struct task_struct *task)
 {
-	return container_of(task_subsys_state(task, perf_subsys_id),
+	return container_of(task_subsys_state_check(task, perf_subsys_id, 1),
 			struct perf_cgroup, css);
 }
 
maintainer
#30 lore raw
In reply to Paul E. McKenney
Quoted 7 lines · Paul E. McKenney
Quoted 3 lines
Quoted 1 line

code has a problem.

yeah, task_struct is rcu-freed

But we are not in an RCU read-side critical section, otherwise the splat would not have happened. Or did I miss a turn in the analysis roadmap above?

I think cgroup code does get_task_struct()/put_task_struct().

#31 lore raw
In reply to Paul E. McKenney

Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 34 lines · Peter Zijlstra
Quoted 12 lines · Stephane Eranian
Quoted 5 lines · Peter Zijlstra

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

I think the core issue at stake here is not so much the cgroup disappearing. It cannot go away because it is ref counted (perf_events does the necessary css_get()/css_put()). But it is rather the task disappearing while we are operating
on its state.

Quoted 3 lines

I don't think task (prev or next) can disappear while we execute perf_cgroup_sched_out()/perf_cgroup_sched_in() because we are in the context switch code.

Right.

Quoted 15 lines

What remains is:
  * update_cgrp_time_from_event()
    alway operates on current task

  * perf_cgroup_set_timestamp()

       - perf_event_task_tick() -> cpu_ctx_sched_in() but in this case it is on the current task
       - perf_event_task_sched_in() in context switch code so I assume it is safe
       - __perf_event_enable() but it is called on current

  - perf_cgroup_switch()
    * perf_cgroup_sched_in()/perf_cgroup_sched_out() -> context switch code

Quoted 8 lines
Quoted 6 lines

    * perf_cgroup_attach()
      called from cgroup code. Does not appear to hold task_lock(). the routine already grabs the rcu_read_lock() but it that enough to guarantee the task cannot
      vanish. I would hope so, otherwise I think the cgroup attach code has a problem.

yeah, task_struct is rcu-freed

But we are not in an RCU read-side critical section, otherwise the splat would not have happened.  Or did I miss a turn in the analysis roadmap above?

Quoted 6 lines
Quoted 5 lines

In summary, unless I am mistaken, it looks to me that we may not need those new rcu_read_lock()
calls after all.

Does anyone have a different analysis?

Quoted 8 lines
Quoted 4 lines

The only other problem I could see is that perf_cgroup_sched_{in,out} can race against perf_cgroup_attach_task() and make the wrong decision. But then perf_cgroup_attach will call perf_cgroup_switch() to fix that up again.

If this really is a false positive, what should be used to get rid of the splats?

I think on that path:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80

We are neither holding the rcu_read_lock() nor the task_lock() but we are operating on the current task. The task cannot just vanish. So the rcu_dereference() and lock_is_held() macros may detect a false positive in that case. Yet, I doubt this would be the only place....

maintainer
#32 lore raw
Quoted 9 lines · Stephane Eranian

I think on that path:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
Quoted 4 lines

We are neither holding the rcu_read_lock() nor the task_lock() but we are operating on the current task. The task cannot just vanish. So the rcu_dereference() and lock_is_held() macros may detect a false positive in that case. Yet, I doubt this would be the only place....

Well, normally being current doesn't guarantee your cgroup won't disappear. The perf stuff hwoever takes refs and is synced against ->attach() by virtue of it calling perf_cgroup_switch() etc..

#33 lore raw
Quoted 10 lines · Peter Zijlstra
Quoted 9 lines · Stephane Eranian

I think on that path:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
Quoted 9 lines
Quoted 4 lines

We are neither holding the rcu_read_lock() nor the task_lock() but we are operating on the current task. The task cannot just vanish. So the rcu_dereference() and lock_is_held() macros may detect a false positive in that case. Yet, I doubt this would be the only place....

Well, normally being current doesn't guarantee your cgroup won't disappear. The perf stuff hwoever takes refs and is synced against ->attach() by virtue of it calling perf_cgroup_switch() etc..

perf_event_enable_on_exec()
perf_cgroup_sched_out(current, NULL);
perf_cgroup_from_task(current)
task_subsys_state(current, perf_subsys_id)

That is the sequence triggering the warning. Obviously, we come here without task_lock() nor rcu_read_lock().

The cgroup cannot disappear because it is refcounted by perf_events. The task cannot disappear because it's the current task.

So I think we need to simply quiesce the warning, most likely like what Peter just suggested.

#35 lore raw
In reply to Stephane Eranian
Quoted 75 lines · Stephane Eranian

Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 34 lines · Peter Zijlstra
Quoted 12 lines · Stephane Eranian
Quoted 5 lines · Peter Zijlstra

So far nobody seems to have stated if this is an actual problem or just shutting up lockdep-prove-rcu? I very much suspect the latter, in which case I really utterly hate the patch because it adds instructions to fast-paths just to kill a debug warning.

I think the core issue at stake here is not so much the cgroup disappearing. It cannot go away because it is ref counted (perf_events does the necessary css_get()/css_put()). But it is rather the task disappearing while we are operating
on its state.

Quoted 3 lines

I don't think task (prev or next) can disappear while we execute perf_cgroup_sched_out()/perf_cgroup_sched_in() because we are in the context switch code.

Right.

Quoted 15 lines

What remains is:
  * update_cgrp_time_from_event()
    alway operates on current task

  * perf_cgroup_set_timestamp()

       - perf_event_task_tick() -> cpu_ctx_sched_in() but in this case it is on the current task
       - perf_event_task_sched_in() in context switch code so I assume it is safe
       - __perf_event_enable() but it is called on current

  - perf_cgroup_switch()
    * perf_cgroup_sched_in()/perf_cgroup_sched_out() -> context switch code

Quoted 8 lines
Quoted 6 lines

    * perf_cgroup_attach()
      called from cgroup code. Does not appear to hold task_lock(). the routine already grabs the rcu_read_lock() but it that enough to guarantee the task cannot
      vanish. I would hope so, otherwise I think the cgroup attach code has a problem.

yeah, task_struct is rcu-freed

But we are not in an RCU read-side critical section, otherwise the splat would not have happened.  Or did I miss a turn in the analysis roadmap above?

Quoted 6 lines
Quoted 5 lines

In summary, unless I am mistaken, it looks to me that we may not need those new rcu_read_lock()
calls after all.

Does anyone have a different analysis?

Quoted 8 lines
Quoted 4 lines

The only other problem I could see is that perf_cgroup_sched_{in,out} can race against perf_cgroup_attach_task() and make the wrong decision. But then perf_cgroup_attach will call perf_cgroup_switch() to fix that up again.

If this really is a false positive, what should be used to get rid of the splats?

I think on that path:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
Quoted 4 lines

We are neither holding the rcu_read_lock() nor the task_lock() but we are operating on the current task. The task cannot just vanish. So the rcu_dereference() and lock_is_held() macros may detect a false positive in that case. Yet, I doubt this would be the only place....

In that case, could something like task==current be added to the macro's check? Perhaps this is what Peter was suggesting...

Thanx, Paul

Thanx, Paul

#34 lore raw
In reply to Peter Zijlstra
Quoted 10 lines · Peter Zijlstra
Quoted 9 lines · Stephane Eranian

I think on that path:

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[<8108aa02>] perf_event_enable_on_exec+0x1d2/0x1e0
[<81063764>] ? __lock_release+0x54/0xb0
[<8108cca8>] perf_event_comm+0x18/0x60
[<810d1abd>] ? set_task_comm+0x5d/0x80
[<81af622d>] ? _raw_spin_unlock+0x1d/0x40
[<810d1ac4>] set_task_comm+0x64/0x80
Quoted 8 lines
Quoted 4 lines

We are neither holding the rcu_read_lock() nor the task_lock() but we are operating on the current task. The task cannot just vanish. So the rcu_dereference() and lock_is_held() macros may detect a false positive in that case. Yet, I doubt this would be the only place....

Well, normally being current doesn't guarantee your cgroup won't disappear. The perf stuff hwoever takes refs and is synced against ->attach() by virtue of it calling perf_cgroup_switch() etc..

OK, never mind my task==current suggestion. :-/

Thanx, Paul

#28 lore raw
In reply to Peter Zijlstra
Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Paul E. McKenney

If this really is a false positive, what should be used to get rid of the splats?

Probably something slightly less horrid than the below.. ;-)

Hmmm... Could the "1" below be replaced by the task's reference count? Probabilistic, but should eventually catch it.

Thanx, Paul

Quoted 16 lines

---

kernel/events/core.c +1 -1
index d1a1bee..8f05201 100644
@@ -229,7 +229,7 @@ static void perf_ctx_unlock(struct perf_cpu_context *cpuctx,
 static inline struct perf_cgroup *
 perf_cgroup_from_task(struct task_struct *task)
 {
-	return container_of(task_subsys_state(task, perf_subsys_id),
+	return container_of(task_subsys_state_check(task, perf_subsys_id, 1),
 			struct perf_cgroup, css);
 }
 
#29 lore raw

hardcoding 1 (true) assumes we will always call perf_cgroup_set_timestamp() on current task. That's true today but we should make sure we don't miss an error
if we ever change that in the future.

Quoted 32 lines · Paul E. McKenney
Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Paul E. McKenney

If this really is a false positive, what should be used to get rid of the splats?

Probably something slightly less horrid than the below.. ;-)

Hmmm...  Could the "1" below be replaced by the task's reference count? Probabilistic, but should eventually catch it.

                                                       Thanx, Paul

Quoted 16 lines

---

kernel/events/core.c +0 -0
index d1a1bee..8f05201 100644
@@ -229,7 +229,7 @@ static void perf_ctx_unlock(struct perf_cpu_context *cpuctx,

 static inline struct perf_cgroup * perf_cgroup_from_task(struct task_struct *task)
 {
-     return container_of(task_subsys_state(task, perf_subsys_id),
+     return container_of(task_subsys_state_check(task, perf_subsys_id, 1), struct perf_cgroup, css);
 }