support for antenna configuration profiles

@@ -1109,6 +1109,12 @@ enum nl80211_commands {
  *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
  *	used for asking the driver to perform a TDLS operation.
  *
+ * @NL80211_ATTR_WIPHY_EXTANT_SUPPORT: Flag indicating support for an external
+ *	antenna switch.
+ * @NL80211_ATTR_WIPHY_EXTANT_STATE: Currently selected antenna switch profile.
+ * @NL80211_ATTR_WIPHY_EXTANT_SUPP_PROFILES: Nested attribute containing names
+ *	and descriptions of the supported antenna switch configuration profiles.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */

@@ -1337,6 +1343,10 @@ enum nl80211_attrs {
 	NL80211_ATTR_TDLS_SUPPORT,
 	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
 
+	NL80211_ATTR_WIPHY_EXTANT_SUPPORT,
+	NL80211_ATTR_WIPHY_EXTANT_STATE,
+	NL80211_ATTR_WIPHY_EXTANT_SUPP_PROFILES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,

@@ -1632,6 +1644,26 @@ enum nl80211_mpath_info {
 	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
 };
 
+
+/**
+ * enum nl80211_easp_attr - external antenna switch configuration profiles
+ * @__NL80211_EASP_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_EASP_ATTR_ID: unique identifier
+ * @NL80211_EASP_ATTR_NAME: human-readable name of the configuration profile
+ * @NL80211_EASP_ATTR_DESC: human-readable description of the configuration profile
+ * @NL80211_EASP_ATTR_MAX: highest profile attribute currently defined
+ * @__NL80211_EASP_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_easp_attr {
+	__NL80211_EASP_ATTR_INVALID,
+	NL80211_EASP_ATTR_ID,
+	NL80211_EASP_ATTR_NAME,
+	NL80211_EASP_ATTR_DESC,
+	/* keep last */
+	__NL80211_EASP_ATTR_AFTER_LAST,
+	NL80211_EASP_ATTR_MAX = __NL80211_EASP_ATTR_AFTER_LAST - 1
+};
+
 /**
  * enum nl80211_band_attr - band attributes
  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved

94 lines not on this page · raw message

@@ -1435,6 +1435,9 @@ struct cfg80211_gtk_rekey_data {
  *
  * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
  *
+ * @set_extant: Select the external antenna switch configuration profile.
+ * @get_extant: Get currently selected antenna switch profile.
+ *
  * @set_ringparam: Set tx and rx ring sizes.
  *
  * @get_ringparam: Get tx and rx ring current and maximum sizes.

@@ -1613,6 +1616,9 @@ struct cfg80211_ops {
 	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
 	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
 
+	int	(*set_extant)(struct wiphy *wiphy, u32 extant);
+	int	(*get_extant)(struct wiphy *wiphy, u32 *extant);
+
 	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
 	void	(*get_ringparam)(struct wiphy *wiphy,
 				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);

@@ -1688,6 +1694,8 @@ struct cfg80211_ops {
  *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
  *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
  *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAS_EXTANT_SWITCH: The device got a configurable external antenna
+ *	switch.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),

@@ -1706,6 +1714,7 @@ enum wiphy_flags {
 	WIPHY_FLAG_AP_UAPSD			= BIT(14),
 	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
 	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAS_EXTANT_SWITCH		= BIT(17),
 };
 
 /**

@@ -1833,6 +1842,21 @@ struct wiphy_wowlan_support {
 };
 
 /**
+ * struct wiphy_extant_profile - User-parsable external antenna switch info
+ *
+ * This structure is used to provide the available switch configurations.
+ * @id: unique identifier of the profile
+ * @name: profile name (a short string)
+ * @description: user-parsable description of the profile
+ */
+struct wiphy_extant_profile {
+	int id;
+	char *name;
+	char *desc;
+};
+
+
+/**
  * struct wiphy - wireless hardware description
  * @reg_notifier: the driver's regulatory notification callback,
  *	note that if your driver uses wiphy_apply_custom_regulatory()

@@ -1912,6 +1936,8 @@ struct wiphy_wowlan_support {
  *	configured as RX antennas. Antenna configuration commands will be
  *	rejected unless this or @available_antennas_tx is set.
  *
+ * @extant: struct holding the available external antenna switch configurations.
+ *
  * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
  *	may request, if implemented.
  *

@@ -1972,6 +1998,8 @@ struct wiphy {
 	u32 available_antennas_tx;
 	u32 available_antennas_rx;
 
+	struct wiphy_extant_profile *extant;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered