3.2-rcX regression: boot failure on AMD K6-III/450
Verified for 3.2-rc[1-3]. Subject system using LILO as bootloader. The following messages appear on the console:
Loading linux-dev.
BIOS data check successful
Probing EDD (edd=off to disable)... ok
<blank line>
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
<hang here -- no further output>
The console output is normal and expected up to the point of the hang. Versions 3.1 and prior work fine. I had earlier thought the floppy regression Pavel reported applied to my case (and it may), but I don't seem to be getting that far in the boot process.
--Bob
Hi,
Quoted 11 lines · Bob Tracy
Verified for 3.2-rc[1-3]. Subject system using LILO as bootloader. The following messages appear on the console:
Loading linux-dev.
BIOS data check successful
Probing EDD (edd=off to disable)... ok
<blank line>
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
<hang here -- no further output>
Quoted 4 lines
The console output is normal and expected up to the point of the hang. Versions 3.1 and prior work fine. I had earlier thought the floppy regression Pavel reported applied to my case (and it may), but I don't seem to be getting that far in the boot process.
can you try the following patch:
--
From: Borislav Petkov <[email protected]>
Date: Wed, 9 Nov 2011 18:08:40 +0100
Subject: [PATCH] x86, microcode, AMD: Restrict microcode reporting
bcb80e53877c ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") added support for dumping microcode patch level in /proc/cpuinfo on AMD. Although we were very cautious and did rdmsr_safe the microcode patch level MSR, this broke booting on Geode LX because this CPU doesn't have that MSR and at the time we do the read, exception tables which are used by rdmsr_safe are not yet initialized, leading to the boot hang.
This is the simple fix which enables the microcode line in /proc/cpuinfo for K8 and newer (it is not that interesting for older boxes anyway :-)).
--- arch/x86/kernel/cpu/amd.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
arch/x86/kernel/cpu/amd.c +2 -1
@@ -474,7 +474,8 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) }#endif -rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); +if (c->x86 >=0xf ) +rdmsr_safe (MSR_AMD64_PATCH_LEVEL , &c->microcode, &dummy); }static void __cpuinit init_amd (struct cpuinfo_x86 *c)
Signature · 13 lines
1.7.8.rc0 Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551
Quoted 10 lines · Borislav Petkov
can you try the following patch:
(...)bcb80e53877c("x86, microcode, AMD: Add microcode revision to/proc/cpuinfo") added support for dumping microcode patch level in/proc/cpuinfoon AMD. Although we were very cautious and didrdmsr_safethe microcode patch level MSR, this broke booting on Geode LX because this CPU doesn't have that MSR and at the time we do the read, exception tables which are used byrdmsr_safeare not yet initialized, leading to the boot hang.
Quoted 6 lines
This is the simple fix which enables the microcode line in
/proc/cpuinfofor K8 and newer (it is not that interesting for older boxes anyway :-)).Reported-and-bisected-and-tested-by Daniel Drake <[email protected]>Link http://lkml.kernel.org/r/CAMLZHHTSuHZoPbm_YfB8G05JA+xKCE4+Jmj4NW8mnZUHogQSBA@mail.gmail.com open hereSigned-off-by Borislav Petkov <[email protected]>
That fixed it. Thank you!
--Bob
Quoted 1 line · Bob Tracy
That fixed it. Thank you!
Ok, thanks for testing.
Signature · 8 lines
Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551