asdf
There is a new gcc warning in this function:
drivers/mmc/card/block.c:836:18: warning: ‘arg’ may be used uninitialized in this function [-Wuninitialized]
810 /* The sanitize operation is supported at v4.5 only */
811 if (mmc_can_sanitize(card)) {
812 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
813 EXT_CSD_SANITIZE_START, 1, 0);
1) arg is uninitialized here. mmc_switch() can return -EIO.
814 goto out;
815 }
816
817 from = blk_rq_pos(req);
818 nr = blk_rq_sectors(req);
819
820 if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
821 arg = MMC_SECURE_TRIM1_ARG;
822 else
823 arg = MMC_SECURE_ERASE_ARG;
824 retry:
825 if (card->quirks & MMC_QUIRK_INAND_CMD38) {
826 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
827 INAND_CMD38_ARG_EXT_CSD,
828 arg == MMC_SECURE_TRIM1_ARG ?
^^^3) uninitialized.
829 INAND_CMD38_ARG_SECTRIM1 :
830 INAND_CMD38_ARG_SECERASE,
831 0);
832 if (err)
833 goto out;
834 }
835 err = mmc_erase(card, from, nr, arg);
836 if (!err && arg == MMC_SECURE_TRIM1_ARG) {
837 if (card->quirks & MMC_QUIRK_INAND_CMD38) {
838 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
839 INAND_CMD38_ARG_EXT_CSD,
840 INAND_CMD38_ARG_SECTRIM2,
841 0); 842 if (err)
843 goto out;
844 }
845 err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
846 }
847 out:
848 if (err == -EIO && !mmc_blk_reset(md, card->host, type))
849 goto retry;
2) We could maybe hit the goto retry here if the reset works.
regards,
dan carpenter
Re: uninitialized variable in mmc_blk_issue_secdiscard_rq()
Quoted 4 lines · Dan Carpenter
There is a new gcc warning in this function:
drivers/mmc/card/block.c:836:18: warning: ‘arg’ may be used uninitialized in this function [-Wuninitialized]
Sorry for the bad subject. The email escaped before it should have.
Same thing for "nr" and "from".
drivers/mmc/card/block.c:835:6: warning: ‘nr’ may be used uninitialized in this function [-Wuninitialized] drivers/mmc/card/block.c:835:6: warning: ‘from’ may be used uninitialized in this function [-Wuninitialized]
regards,
dan carpenter
Hi
Yes possible scenario, it should be changed like this.
out:
if (err == -EIO) {
int ret = !mmc_blk_reset(md, card->host, type);
if (ret && !mmc_can_sanitize(card))
goto retry;
}anyway, I will find the more fancy way.
Thank you for pointing out.
BR,
Kyungmin Park
Quoted 65 lines · Dan Carpenter
There is a new gcc warning in this function:
drivers/mmc/card/block.c:836:18: warning: ‘arg’ may be used uninitialized in this function [-Wuninitialized]810 /* The sanitize operation is supported at v4.5 only */
811 if (mmc_can_sanitize(card)) {
812 err = mmc_switch(card,EXT_CSD_CMD_SET_NORMAL,
813EXT_CSD_SANITIZE_START, 1, 0);1) arg is uninitialized here.
mmc_switch()can return-EIO.814 goto out; 815 } 816 817 from = blk_rq_pos(req); 818 nr = blk_rq_sectors(req); 819 820 if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) 821 arg = MMC_SECURE_TRIM1_ARG; 822 else 823 arg = MMC_SECURE_ERASE_ARG; 824 retry: 825 if (card->quirks & MMC_QUIRK_INAND_CMD38) { 826 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, 827 INAND_CMD38_ARG_EXT_CSD, 828 arg == MMC_SECURE_TRIM1_ARG ? ^^^3) uninitialized.
829 INAND_CMD38_ARG_SECTRIM1 : 830 INAND_CMD38_ARG_SECERASE, 831 0); 832 if (err) 833 goto out; 834 } 835 err = mmc_erase(card, from, nr, arg); 836 if (!err && arg == MMC_SECURE_TRIM1_ARG) { 837 if (card->quirks & MMC_QUIRK_INAND_CMD38) { 838 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, 839 INAND_CMD38_ARG_EXT_CSD, 840 INAND_CMD38_ARG_SECTRIM2, 841 0); 842 if (err) 843 goto out; 844 } 845 err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); 846 } 847 out: 848 if (err == -EIO && !mmc_blk_reset(md, card->host, type)) 849 goto retry;2) We could maybe hit the goto retry here if the reset works.
regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html