pull request: wirelss 2011-12-09
Subsystems (8)
commit e7ab5f1c323e137120561daeec75e91a1bd9ec8b
Dave,
This is a collection of fixes intended for 3.2.
Gustavo describes the Blueooth bits thusly: "Some fixes for 3.2:
support for a new Marvell device, two module reference fixes, a memory leak fix and finally a check in a HCI version check."
Additionally, we have an ath9k fix for a regression on single-stream chips, a mac80211 fix for a race in aggregation start (looks big due to moving some functions to avoid forward declarations), a fix for some improper power state management in the rtlwifi suite, and a fix for an ssb init regression on some SoCs.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit 1af32f0fcf33ddca52c8fd2b5bc84c129dcb1bdd:
Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge (2011-12-07 15:06:33 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
Andrei Emeltchenko (1):
Bluetooth: Correct version check in hci_setup
Bing Zhao (1):
Bluetooth: btmrvl: support Marvell Bluetooth device SD8797
Cong Wang (1):
btusb: fix a memory leak in btusb_send_frame()
David Herrmann (2):
Bluetooth: cmtp: Fix module reference
Bluetooth: bnep: Fix module reference
Felix Fietkau (1):
ath9k: fix check for antenna diversity support
Hauke Mehrtens (1):
ssb: fix init regression with SoCs
Johannes Berg (1):
mac80211: fix another race in aggregation start
John W. Linville (2):
Merge branch 'master' of git://git.kernel.org/.../padovan/bluetooth
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Philipp Dreimann (1):
rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transitiondrivers/bluetooth/Kconfig | 6 +- drivers/bluetooth/btmrvl_sdio.c | 15 ++++- drivers/bluetooth/btusb.c | 3 +- drivers/net/wireless/ath/ath9k/main.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192ce/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192cu/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 2 +- drivers/ssb/driver_pcicore.c | 8 ++- net/bluetooth/bnep/core.c | 8 +-- net/bluetooth/cmtp/core.c | 5 +- net/bluetooth/hci_event.c | 2 +- net/mac80211/agg-tx.c | 86 ++++++++++++------------- 13 files changed, 76 insertions(+), 67 deletions(-)
drivers/bluetooth/Kconfig +3 -3
@@ -188,7 +188,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787. + Marvell Bluetooth devices, such as 8688/8787/8797. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module.
@@ -201,8 +201,8 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787 chipsets are - supported. + devices with SDIO interface. Currently SD8688/SD8787/SD8797 + chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module.
drivers/bluetooth/btmrvl_sdio.c +13 -2
@@ -65,7 +65,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = { .io_port_1 = 0x01, .io_port_2 = 0x02, }; -static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = { +static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = { .cfg =0x00 , .host_int_mask =0x02 , .host_intstatus =0x03 ,
@@ -92,7 +92,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper =NULL , .firmware ="mrvl/sd8787_uapsta.bin" , - .reg = &btmrvl_reg_8787, + .reg = &btmrvl_reg_87xx, + .sd_blksz_fw_dl =256 , +}; + +static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { + .helper =NULL , + .firmware ="mrvl/sd8797_uapsta.bin" , + .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl =256 , };
@@ -103,6 +110,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {/* Marvell SD8787 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A), .driver_data = (unsigned long) &btmrvl_sdio_sd8787 }, + /* Marvell SD8797 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A), + .driver_data = (unsigned long) &btmrvl_sdio_sd8797 }, { } /* Terminating entry */ };
@@ -1076,3 +1086,4 @@ MODULE_LICENSE("GPL v2");MODULE_FIRMWARE ("sd8688_helper.bin" );MODULE_FIRMWARE ("sd8688.bin" );MODULE_FIRMWARE ("mrvl/sd8787_uapsta.bin" ); +MODULE_FIRMWARE ("mrvl/sd8797_uapsta.bin" );
drivers/bluetooth/btusb.c +1 -2
@@ -777,9 +777,8 @@ skip_waking:usb_mark_last_busy (data->udev); } -usb_free_urb (urb); - done: +usb_free_urb (urb);return err; }
drivers/net/wireless/ath/ath9k/main.c +1 -1
@@ -286,7 +286,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)ath_start_ani (common); } -if (ath9k_hw_ops (ah)->antdiv_comb_conf_get && sc->ant_rx !=3 ) { +if ((ah->caps.hw_caps &ATH9K_HW_CAP_ANT_DIV_COMB ) && sc->ant_rx !=3 ) {struct ath_hw_antcomb_conf div_ant_conf;u8 lna_conf;
drivers/net/wireless/rtlwifi/rtl8192ce/phy.c +1 -1
@@ -569,7 +569,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw, }case ERFSLEEP :{if (ppsc->rfpwr_state ==ERFOFF ) -break ; +return false;for (queue_id =0 , i =0 ; queue_id <RTL_PCI_MAX_TX_QUEUE_COUNT ;) { ring = &pcipriv->dev.tx_ring[queue_id];
drivers/net/wireless/rtlwifi/rtl8192cu/phy.c +1 -1
@@ -548,7 +548,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,break ;case ERFSLEEP :if (ppsc->rfpwr_state ==ERFOFF ) -break ; +return false;for (queue_id =0 , i =0 ; queue_id <RTL_PCI_MAX_TX_QUEUE_COUNT ;) { ring = &pcipriv->dev.tx_ring[queue_id];
drivers/net/wireless/rtlwifi/rtl8192de/phy.c +1 -1
@@ -3374,7 +3374,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw,break ;case ERFSLEEP :if (ppsc->rfpwr_state ==ERFOFF ) -break ; +return false;for (queue_id =0 , i =0 ; queue_id <RTL_PCI_MAX_TX_QUEUE_COUNT ;) {
drivers/net/wireless/rtlwifi/rtl8192se/phy.c +1 -1
@@ -602,7 +602,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw, }case ERFSLEEP :if (ppsc->rfpwr_state ==ERFOFF ) -break ; +return false;for (queue_id =0 , i =0 ; queue_id <RTL_PCI_MAX_TX_QUEUE_COUNT ;) {
drivers/ssb/driver_pcicore.c +6 -2
@@ -517,10 +517,14 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)static void __devinit ssb_pcicore_init_clientmode (struct ssb_pcicore *pc) { -ssb_pcicore_fix_sprom_core_index (pc); +struct ssb_device *pdev = pc->dev; +struct ssb_bus *bus = pdev->bus; + +if (bus->bustype ==SSB_BUSTYPE_PCI ) +ssb_pcicore_fix_sprom_core_index (pc);/* Disable PCI interrupts. */ -ssb_write32 (pc->dev,SSB_INTVEC ,0 ); +ssb_write32 (pdev,SSB_INTVEC ,0 );/* Additional PCIe always once-executed workarounds */ if (pc->dev->id.coreid ==SSB_DEV_PCIE ) {
net/bluetooth/bnep/core.c +3 -5
@@ -79,17 +79,12 @@ static struct bnep_session *__bnep_get_session(u8 *dst)static void __bnep_link_session (struct bnep_session *s) { -/* It's safe to call __module_get() here because sessions are added -by the socket layer which has to hold the reference to this module. -*/ -__module_get (THIS_MODULE );list_add (&s->list, &bnep_session_list); }static void __bnep_unlink_session (struct bnep_session *s) {list_del (&s->list); -module_put (THIS_MODULE ); }static int bnep_send (struct bnep_session *s,void *data,size_t len)
@@ -530,6 +525,7 @@ static int bnep_session(void *arg)up_write (&bnep_session_sem);free_netdev (dev); +module_put_and_exit (0 );return 0 ; }
@@ -616,9 +612,11 @@ int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock)__bnep_link_session (s); +__module_get (THIS_MODULE ); s->task =kthread_run (bnep_session, s,"kbnepd %s" , dev->name);if (IS_ERR (s->task)) {/* Session thread start failed, gotta cleanup. */ +module_put (THIS_MODULE );unregister_netdev (dev);__bnep_unlink_session (s); err =PTR_ERR (s->task);
net/bluetooth/cmtp/core.c +3 -2
@@ -67,14 +67,12 @@ static struct cmtp_session *__cmtp_get_session(bdaddr_t *bdaddr)static void __cmtp_link_session (struct cmtp_session *session) { -__module_get (THIS_MODULE );list_add (&session->list, &cmtp_session_list); }static void __cmtp_unlink_session (struct cmtp_session *session) {list_del (&session->list); -module_put (THIS_MODULE ); }static void __cmtp_copy_session (struct cmtp_session *session,struct cmtp_conninfo *ci)
@@ -327,6 +325,7 @@ static int cmtp_session(void *arg)up_write (&cmtp_session_sem);kfree (session); +module_put_and_exit (0 );return 0 ; }
@@ -376,9 +375,11 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock)__cmtp_link_session (session); +__module_get (THIS_MODULE ); session->task =kthread_run (cmtp_session, session,"kcmtpd_ctr_%d" , session->num);if (IS_ERR (session->task)) { +module_put (THIS_MODULE ); err =PTR_ERR (session->task); goto unlink; }
net/bluetooth/hci_event.c +1 -1
@@ -545,7 +545,7 @@ static void hci_setup(struct hci_dev *hdev) {hci_setup_event_mask (hdev); -if (hdev->lmp_ver >1 ) +if (hdev->hci_ver >1 )hci_send_cmd (hdev,HCI_OP_READ_LOCAL_COMMANDS ,0 ,NULL );if (hdev->features[6 ] &LMP_SIMPLE_PAIR ) {
net/mac80211/agg-tx.c +41 -45
121 lines not on this page · raw message
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you [email protected] might be all we have. Be ready.
David Miller
maintainerFrom: "John W. Linville" <[email protected]>
Date: Fri, 9 Dec 2011 14:22:28 -0500
Quoted 6 lines
This is a collection of fixes intended for 3.2.
Gustavo describes the Blueooth bits thusly: "Some fixes for 3.2:
support for a new Marvell device, two module reference fixes, a memory leak fix and finally a check in a HCI version check."
Quoted 7 lines
Additionally, we have an ath9k fix for a regression on single-stream chips, a mac80211 fix for a race in aggregation start (looks big due to moving some functions to avoid forward declarations), a fix for some improper power state management in the rtlwifi suite, and a fix for an ssb init regression on some SoCs.
Please let me know if there are problems!
Pulled, thanks John.
As we wind down towards the end of these RCs, please exert even more pushback on bug fixes from now until 3.2 goes out.
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html