x86/syscall changes for v3.3

index f47cdef..ab0a984 100644
@@ -33,14 +33,15 @@ This document describes the Linux kernel Makefiles.
 
 	=== 6 Architecture Makefiles
 	   --- 6.1 Set variables to tweak the build to the architecture
-	   --- 6.2 Add prerequisites to archprepare:
-	   --- 6.3 List directories to visit when descending
-	   --- 6.4 Architecture-specific boot images
-	   --- 6.5 Building non-kbuild targets
-	   --- 6.6 Commands useful for building a boot image
-	   --- 6.7 Custom kbuild commands
-	   --- 6.8 Preprocessing linker scripts
-	   --- 6.9 Generic header files
+	   --- 6.2 Add prerequisites to archheaders:
+	   --- 6.3 Add prerequisites to archprepare:
+	   --- 6.4 List directories to visit when descending
+	   --- 6.5 Architecture-specific boot images
+	   --- 6.6 Building non-kbuild targets
+	   --- 6.7 Commands useful for building a boot image
+	   --- 6.8 Custom kbuild commands
+	   --- 6.9 Preprocessing linker scripts
+	   --- 6.10 Generic header files
 
 	=== 7 Kbuild syntax for exported headers
 		--- 7.1 header-y

@@ -252,7 +253,7 @@ more details, with real examples.
 	This will create a library lib.a based on delay.o. For kbuild to
 	actually recognize that there is a lib.a being built, the directory
 	shall be listed in libs-y.
-	See also "6.3 List directories to visit when descending".
+	See also "6.4 List directories to visit when descending".
 
 	Use of lib-y is normally restricted to lib/ and arch/*/lib.
 

@@ -974,7 +975,20 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
---- 6.2 Add prerequisites to archprepare:
+--- 6.2 Add prerequisites to archheaders:
+
+	The archheaders: rule is used to generate header files that
+	may be installed into user space by "make header_install" or
+	"make headers_install_all".  In order to support
+	"make headers_install_all", this target has to be able to run
+	on an unconfigured tree, or a tree configured for another
+	architecture.
+
+	It is run before "make archprepare" when run on the
+	architecture itself.
+
+
+--- 6.3 Add prerequisites to archprepare:
 
 	The archprepare: rule is used to list prerequisites that need to be
 	built before starting to descend down in the subdirectories.

@@ -990,7 +1004,7 @@ When kbuild executes, the following steps are followed (roughly):
 	generating offset header files.
 
 
---- 6.3 List directories to visit when descending
+--- 6.4 List directories to visit when descending
 
 	An arch Makefile cooperates with the top Makefile to define variables
 	which specify how to build the vmlinux file.  Note that there is no

@@ -1019,7 +1033,7 @@ When kbuild executes, the following steps are followed (roughly):
 		drivers-$(CONFIG_OPROFILE)  += arch/sparc64/oprofile/
 
 
---- 6.4 Architecture-specific boot images
+--- 6.5 Architecture-specific boot images
 
 	An arch Makefile specifies goals that take the vmlinux file, compress
 	it, wrap it in bootstrapping code, and copy the resulting files

@@ -1070,7 +1084,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	When "make" is executed without arguments, bzImage will be built.
 
---- 6.5 Building non-kbuild targets
+--- 6.6 Building non-kbuild targets
 
     extra-y
 

@@ -1090,7 +1104,7 @@ When kbuild executes, the following steps are followed (roughly):
 	shall be built, but shall not be linked as part of built-in.o.
 
 
---- 6.6 Commands useful for building a boot image
+--- 6.7 Commands useful for building a boot image
 
 	Kbuild provides a few macros that are useful when building a
 	boot image.

@@ -1112,7 +1126,7 @@ When kbuild executes, the following steps are followed (roughly):
 	always be built.
 	Assignments to $(targets) are without $(obj)/ prefix.
 	if_changed may be used in conjunction with custom commands as
-	defined in 6.7 "Custom kbuild commands".
+	defined in 6.8 "Custom kbuild commands".
 
 	Note: It is a typical mistake to forget the FORCE prerequisite.
 	Another common pitfall is that whitespace is sometimes

@@ -1171,7 +1185,7 @@ When kbuild executes, the following steps are followed (roughly):
 		$(obj)/%.dtb: $(src)/%.dts
 			$(call cmd,dtc)
 
---- 6.7 Custom kbuild commands
+--- 6.8 Custom kbuild commands
 
 	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
 	of a command is normally displayed.

@@ -1198,7 +1212,7 @@ When kbuild executes, the following steps are followed (roughly):
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
---- 6.8 Preprocessing linker scripts
+--- 6.9 Preprocessing linker scripts
 
 	When the vmlinux image is built, the linker script
 	arch/$(ARCH)/kernel/vmlinux.lds is used.

@@ -1228,7 +1242,7 @@ When kbuild executes, the following steps are followed (roughly):
 	The kbuild infrastructure for *lds file are used in several
 	architecture-specific files.
 
---- 6.9 Generic header files
+--- 6.10 Generic header files
 
 	The directory include/asm-generic contains the header files
 	that may be shared between individual architectures.

index dab8610..e5e0e07 100644
@@ -442,7 +442,7 @@ asm-generic:
 
 no-dot-config-targets := clean mrproper distclean \
 			 cscope gtags TAGS tags help %docs check% coccicheck \
-			 include/linux/version.h headers_% \
+			 include/linux/version.h headers_% archheaders \
 			 kernelversion %src-pkg
 
 config-targets := 0

@@ -979,7 +979,7 @@ prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
                    include/config/auto.conf
 	$(cmd_crmodverdir)
 
-archprepare: prepare1 scripts_basic
+archprepare: archheaders prepare1 scripts_basic
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.

@@ -1046,8 +1046,11 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 # If we do an all arch process set dst to asm-$(hdr-arch)
 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 
+PHONY += archheaders
+archheaders:
+
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic FORCE
+__headers: include/linux/version.h scripts_basic asm-generic archheaders FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all

index 7730af6..28688e6 100644
@@ -64,7 +64,8 @@ USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\
 #This will adjust *FLAGS accordingly to the platform.
 include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 
-KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include \
+		   -I$(HOST_DIR)/include/generated
 
 # -Derrno=kernel_errno - This turns all kernel references to errno into
 # kernel_errno to separate them from the libc errno.  This allows -fno-common

@@ -96,6 +97,10 @@ endef
 
 KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig
 
+archheaders:
+	$(Q)$(MAKE) -C '$(srctree)' KBUILD_SRC= \
+		ARCH=$(SUBARCH) O='$(objtree)' archheaders
+
 archprepare: include/generated/user_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static

@@ -135,7 +140,7 @@ archclean:
 
 # Generated files
 
-$(HOST_DIR)/um/user-offsets.s: FORCE
+$(HOST_DIR)/um/user-offsets.s: __headers FORCE
 	$(Q)$(MAKE) $(build)=$(HOST_DIR)/um $@
 
 define filechk_gen-asm-offsets

index b02e509..209ba12 100644
@@ -118,6 +118,12 @@ KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
 ###
+# Syscall table generation
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/x86/syscalls all
+
+###
 # Kernel objects
 
 head-y := arch/x86/kernel/head_$(BITS).o

index 52d0ccf..455646e 100644
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) += nosyscall.o syscall_ia32.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)

374 lines not on this page · raw message

index 6fa90a8..b57e6a4 100644
@@ -19,7 +19,8 @@ header-y += processor-flags.h
 header-y += ptrace-abi.h
 header-y += sigcontext32.h
 header-y += ucontext.h
-header-y += unistd_32.h
-header-y += unistd_64.h
 header-y += vm86.h
 header-y += vsyscall.h
+
+genhdr-y += unistd_32.h
+genhdr-y += unistd_64.h

index 8baca3c..8c473d9 100644
@@ -25,7 +25,8 @@ obj-$(CONFIG_IRQ_WORK)  += irq_work.o
 obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
-obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
+obj-y			+= syscall_$(BITS).o
+obj-$(CONFIG_X86_64)	+= vsyscall_64.o
 obj-$(CONFIG_X86_64)	+= vsyscall_emu_64.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o topology.o kdebugfs.o

index f3f6f53..1ffcda2 100644
@@ -81,8 +81,6 @@
  * enough to patch inline, increasing performance.
  */
 
-#define nr_syscalls ((syscall_table_size)/4)
-
 #ifdef CONFIG_PREEMPT
 #define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
 #else

@@ -423,7 +421,7 @@ sysenter_past_esp:
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz sysenter_audit
 sysenter_do_call:
-	cmpl $(nr_syscalls), %eax
+	cmpl $(NR_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
 	movl %eax,PT_EAX(%esp)

@@ -504,7 +502,7 @@ ENTRY(system_call)
 					# system call tracing in operation / emulation
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
-	cmpl $(nr_syscalls), %eax
+	cmpl $(NR_syscalls), %eax
 	jae syscall_badsys
 syscall_call:
 	call *sys_call_table(,%eax,4)

@@ -650,7 +648,7 @@ syscall_trace_entry:
 	movl %esp, %eax
 	call syscall_trace_enter
 	/* What it returned is what we'll actually use.  */
-	cmpl $(nr_syscalls), %eax
+	cmpl $(NR_syscalls), %eax
 	jnae syscall_call
 	jmp syscall_exit
 END(syscall_trace_entry)

@@ -690,29 +688,28 @@ END(syscall_badsys)
  * System calls that need a pt_regs pointer.
  */
 #define PTREGSCALL0(name) \
-	ALIGN; \
-ptregs_##name: \
+ENTRY(ptregs_##name) ;  \
 	leal 4(%esp),%eax; \
-	jmp sys_##name;
+	jmp sys_##name; \
+ENDPROC(ptregs_##name)
 
 #define PTREGSCALL1(name) \
-	ALIGN; \
-ptregs_##name: \
+ENTRY(ptregs_##name) ; \
 	leal 4(%esp),%edx; \
 	movl (PT_EBX+4)(%esp),%eax; \
-	jmp sys_##name;
+	jmp sys_##name; \
+ENDPROC(ptregs_##name)
 
 #define PTREGSCALL2(name) \
-	ALIGN; \
-ptregs_##name: \
+ENTRY(ptregs_##name) ; \
 	leal 4(%esp),%ecx; \
 	movl (PT_ECX+4)(%esp),%edx; \
 	movl (PT_EBX+4)(%esp),%eax; \
-	jmp sys_##name;
+	jmp sys_##name; \
+ENDPROC(ptregs_##name)
 
 #define PTREGSCALL3(name) \
-	ALIGN; \
-ptregs_##name: \
+ENTRY(ptregs_##name) ; \
 	CFI_STARTPROC; \
 	leal 4(%esp),%eax; \
 	pushl_cfi %eax; \

@@ -737,8 +734,7 @@ PTREGSCALL2(vm86)
 PTREGSCALL1(vm86old)
 
 /* Clone is an oddball.  The 4th arg is in %edi */
-	ALIGN;
-ptregs_clone:
+ENTRY(ptregs_clone)
 	CFI_STARTPROC
 	leal 4(%esp),%eax
 	pushl_cfi %eax

@@ -1209,11 +1205,6 @@ return_to_handler:
 	jmp *%ecx
 #endif
 
-.section .rodata,"a"
-#include "syscall_table_32.S"
-
-syscall_table_size=(.-sys_call_table)
-
 /*
  * Some functions should be protected against kprobes
  */

350 lines not on this page · raw message

43 lines not on this page · raw message

357 lines not on this page · raw message

223 lines not on this page · raw message

new file mode 100644
index 0000000..31fd5f1

Lines of this file are not shown. View the raw message.

new file mode 100644
index 0000000..0e7f8ec

Lines of this file are not shown. View the raw message.

index 8fb5840..5d065b2 100644

Lines of this file are not shown. View the raw message.

deleted file mode 100644
index a7ca80d..0000000

Lines of this file are not shown. View the raw message.

index a57f5bd..d3bae5e 100644

Lines of this file are not shown. View the raw message.

index 3ab316e..d24810f 100755

Lines of this file are not shown. View the raw message.