Skip to contentSkip to conversation

Koen Kooi : libjpeg-turbo: initial add

oe-commits Andreas Müller 2 participants 5 messages Jan 13, 2012 – Jan 15, 2012 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 20120113110213.AFF2110331@opal

#1 lore raw
Quoted 7 lines · On Friday, January 13, 2012 12:02:13 PM [email protected] wrote:

Module: meta-openembedded.git
Branch: master
Commit: b026074a8d03e18790212ac5953c69fb36dbd3bc
URL:
http://git.openembedded.org/?p=meta-openembedded.git&a=commit;h=b026074a8d
03e18790212ac5953c69fb36dbd3bc

Quoted 7 lines
Author: Koen Kooi <[email protected]>
Date:   Fri Jan 13 11:45:31 2012 +0100

libjpeg-turbo: initial add

If you're on x86 or ARM this will be a lot faster due to SIMD optimizations

Another stupid question from my side: How can I make this replace libjpeg?

Andreas

#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Op 13-01-12 16:59, Andreas Müller schreef:

Quoted 6 lines · On Friday, January 13, 2012 12:02:13 PM [email protected] wrote:
Quoted 5 lines

Module: meta-openembedded.git Branch: master Commit:
b026074a8d03e18790212ac5953c69fb36dbd3bc URL:
http://git.openembedded.org/?p=meta-openembedded.git&a=commit;h=b026074a8d

03e18790212ac5953c69fb36dbd3bc

Quoted 11 lines
Quoted 9 lines

Author: Koen Kooi <[email protected]> Date: Fri Jan 13
11:45:31 2012 +0100

libjpeg-turbo: initial add

If you're on x86 or ARM this will be a lot faster due to SIMD optimizations

Another stupid question from my side: How can I make this replace libjpeg?

Build it manually and then opkg upgrade or set PREFERRED_PROVIDER_jpeg = "libjpeg-turbo". Angstrom will make it the default next week. -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org

iEYEARECAAYFAk8RQ28ACgkQMkyGM64RGpFc4wCffRCBjxq3TAnKiMjh/aV4b33j YDsAn047Q8EvFa+wLo4TrwirqSz1ovNS
=eGl5
-----END PGP SIGNATURE-----

#3 lore raw
Quoted 7 lines · Koen Kooi

Op 13-01-12 16:59, Andreas Müller schreef:

Quoted 2 lines

Another stupid question from my side: How can I make this replace libjpeg?

Build it manually and then opkg upgrade or set PREFERRED_PROVIDER_jpeg = "libjpeg-turbo". Angstrom will make it the default next week.

In the first step I have set

PREFERRED_PROVIDER_jpeg = "libjpeg-turbo"

in my machine configuration and built image incremental and from scratch.

In the second step after angstrom update (and native fix by Eric) I have build image incremental.

In all cases the only jpeg library found in my image was:

libjpeg8_8c+1.2.0-r0_armv7a.ipk

What went wrong?

Andreas

#4 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Op 15-01-12 03:22, Andreas Müller schreef:

Quoted 15 lines · Koen Kooi
Quoted 7 lines

Op 13-01-12 16:59, Andreas Müller schreef:

Quoted 2 lines

Another stupid question from my side: How can I make this replace libjpeg?

Build it manually and then opkg upgrade or set PREFERRED_PROVIDER_jpeg = "libjpeg-turbo". Angstrom will make it the default next week.

In the first step I have set

PREFERRED_PROVIDER_jpeg = "libjpeg-turbo"

in my machine configuration and built image incremental and from scratch.

Quoted 6 lines

In the second step after angstrom update (and native fix by Eric) I have build image incremental.

In all cases the only jpeg library found in my image was:

libjpeg8_8c+1.2.0-r0_armv7a.ipk

And that's how it should be:

$ dpkg-deb -I libjpeg8_8c+1.2.0-r0_armv7a.ipk
 new debian package, version 2.0.
 size 81424 bytes: control archive= 489 bytes.
     554 bytes,    15 lines      control
 Package: libjpeg8
 Version: 8c+1.2.0-r0
 Description: libjpeg-turbo version 8c+1.2.0-r0
  libjpeg-turbo is a derivative of libjpeg that uses SIMD instructions
  (MMX, SSE2, NEON) to accelerate baseline JPEG compression and
  decompression
 Section: base
 Priority: optional
 Maintainer: Angstrom Developers <[email protected]>
 License: BSD-3-Clause
 Architecture: armv7a
 OE: libjpeg-turbo
 Homepage: http://libjpeg-turbo.org/
 Depends: libc6 (>= 2.12)
 Source:
svn://libjpeg-turbo.svn.sourceforge.net/svnroot/libjpeg-turbo;proto=https;module=trunk

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org

iEYEARECAAYFAk8Sl60ACgkQMkyGM64RGpGSaACfdOMvovSZ/eoclabkYkh3cXGQ kEYAnAhBifJ0F5FbMQ6JSOXvHhKgNMJb
=jBcU
-----END PGP SIGNATURE-----

#5 lore raw
Quoted 38 lines · Koen Kooi

Op 15-01-12 03:22, Andreas Müller schreef:

Quoted 15 lines · Koen Kooi
Quoted 6 lines

Op 13-01-12 16:59, Andreas Müller schreef:

Quoted 2 lines

Another stupid question from my side: How can I make this replace libjpeg?

Build it manually and then opkg upgrade or set PREFERRED_PROVIDER_jpeg = "libjpeg-turbo". Angstrom will make it the default next week.

In the first step I have set

PREFERRED_PROVIDER_jpeg = "libjpeg-turbo"

in my machine configuration and built image incremental and from scratch.

Quoted 6 lines

In the second step after angstrom update (and native fix by Eric) I have build image incremental.

In all cases the only jpeg library found in my image was:

libjpeg8_8c+1.2.0-r0_armv7a.ipk

And that's how it should be:

$ dpkg-deb -I libjpeg8_8c+1.2.0-r0_armv7a.ipk
 new debian package, version 2.0.
 size 81424 bytes: control archive= 489 bytes.
     554 bytes,    15 lines      control
 Package: libjpeg8
 Version: 8c+1.2.0-r0
 Description: libjpeg-turbo version 8c+1.2.0-r0
  libjpeg-turbo is a derivative of libjpeg that uses SIMD instructions
  (MMX, SSE2, NEON) to accelerate baseline JPEG compression and
  decompression
 Section: base
 Priority: optional
 Maintainer: Angstrom Developers <[email protected]>
Quoted 9 lines
 License: BSD-3-Clause
 Architecture: armv7a
 OE: libjpeg-turbo
 Homepage: http://libjpeg-turbo.org/
 Depends: libc6 (>= 2.12)
 Source:
svn://libjpeg-turbo.svn.sourceforge.net/svnroot/libjpeg-turbo;proto=https;m
odule=trunk
Oops: libjpeg8_8c+1.2.0-r0_armv7a.ipk was created by libjpeg-turbo. Sorry for 

the noise

Andreas