qcserial: remove unused "debug" parameter
Subsystems (3)
PATCH 3/4 qcserial: remove unused "debug" parameter
Signed-off-by Thomas Tuttle <[email protected]>
--- drivers/usb/serial/qcserial.c | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-)
drivers/usb/serial/qcserial.c +0 -2
@@ -22,8 +22,6 @@#define DRIVER_AUTHOR "Qualcomm Inc"#define DRIVER_DESC "Qualcomm USB Serial driver" -static bool debug; -static const struct usb_device_id id_table[] = { {USB_DEVICE (0x05c6 ,0x9211 )},/* Acer Gobi QDL device */ {USB_DEVICE (0x05c6 ,0x9212 )},/* Acer Gobi Modem Device */
@@ -298,6 +296,3 @@ module_exit(qcexit);MODULE_AUTHOR (DRIVER_AUTHOR );MODULE_DESCRIPTION (DRIVER_DESC );MODULE_LICENSE ("GPL v2" );
A message that is not in the archive (sent off-list or not yet received): [email protected]
...ignore this patch. debug is not unused -- the dbg macro references it, but is defined elsewhere.
Sorry for the noise; turns out I was not actually building my modified tree. >.<
Quoted 26 lines · Thomas Tuttle
Signed-off-by Thomas Tuttle <[email protected]>---
drivers/usb/serial/qcserial.c | 5 -----1 files changed, 0 insertions(+), 5 deletions(-)drivers/usb/serial/qcserial.c +0
-2@@ -22,8 +22,6 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static bool debug; - static const struct usb_device_id id_table[] = {{USB_DEVICE(0x05c6,
0x9211)}, /* Acer Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */drivers/usb/serial/qcserial.c +0
-4@@ -298,6 +296,3 @@ module_exit(qcexit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL v2"); - -module_param (debug, bool,S_IRUGO |S_IWUSR ); -MODULE_PARM_DESC (debug,"Debug enabled or not" ); --
Quoted 2 lines
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html