Skip to contentSkip to conversation

Bug/Typo in ffmpeg.mk

Buildroot universeII at gmx.de 3 participants 3 messages Feb 13, 2012 – Mar 25, 2012 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi buildroot guys,
I just found the buildroot project due to a magazine article and I'm really impressed how simple cross compiling is using this tool.

I'm trying to create a system for a 7400 power-pc and I think I found a typo in /package/multimedia/ffmpeg/ffmpeg.mk

line 148 is:
FFMPEG_CONF_OPT -= --enable-altivec

but should be:
FFMPEG_CONF_OPT += --enable-altivec

My first step is to try running the new kernel/system in qemu, but I'm not sure which option to parameter -M is the correct one for the 7400 CPU.

qemu help gives me the following options:

Quoted 1 line

qemu-system-ppc -M ?

Supported machines are:
virtex-ml507 Xilinx Virtex ML507 reference design
mpc8544ds mpc8544ds
bamboo bamboo (alias of bamboo-0.13)
bamboo-0.13 bamboo
bamboo-0.12 bamboo

ref405ep   ref405ep
taihu      taihu
mac99      Mac99 based PowerMAC
g3beige    Heathrow based PowerMAC (default)
prep       PowerPC PREP platform

Can anyone give me a hint?

Regards,
Andreas

Signature · 2 lines
Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"universeII" == universeII <[email protected]> writes:

universeII> Hi buildroot guys,

universeII> I just found the buildroot project due to a magazine universeII> article and I'm really impressed how simple cross compiling universeII> is using this tool.

Thanks. Out of interest, what magazine was that?

universeII> I'm trying to create a system for a 7400 power-pc and I universeII> think I found a typo in
universeII> /package/multimedia/ffmpeg/ffmpeg.mk

universeII> line 148 is:
universeII> FFMPEG_CONF_OPT -= --enable-altivec

universeII> but should be:
universeII> FFMPEG_CONF_OPT += --enable-altivec

Good catch! I've fixed it in git now.

universeII> My first step is to try running the new kernel/system in universeII> qemu, but I'm not sure which option to parameter -M is the universeII> correct one for the 7400 CPU.

I'm not sure for 7400 either (perhaps check on the qemu list), but we do have a ppc qemu defconfig (make qemu_ppc_g3beige_defconfig). See board/qemu/powerpc-g3beige/readme.txt for details of qemu options.

Signature · 1 line
Bye, Peter Korsgaard
#3 lore raw

[Buildroot] (no subject)

In reply to a message not in the archive
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"universeII" == universeII <[email protected]> writes:

Hi,

universeII> I'm still new to buildroot and a little bit confused.

universeII> My goal is to convince my company to replace the actually universeII> used LynxOS by Linux on our self developed PowerPC VME universeII> boards. The only difference is a non-standard serial port, universeII> so I'm searching the kernel's serial driver. Calling make universeII> menuconfig I do not find any possibility to select the universeII> different device drivers as I normally do when compiling universeII> vanilla kernels. Where can I configure which drivers are universeII> compiled into the kernel and which drivers will be compiled universeII> as modules?

make menuconfig is the configuration options for buildroot. To see the configuration options for the Linux kernel, first make sure you have enabled Kernel->Linux Kernel and then run:

make linux-menuconfig

To see the menuconfig interface of the kernel.

Signature · 1 line
Bye, Peter Korsgaard