mount recovery taking quite long time
3.0.17 kernel, 800GB fs, fresh boot, mount of /home at boot (so no daemons running yet), and :
[ 17.768459] XFS (md3): Starting recovery (logdev: internal) [ 872.427061] XFS (md3): Ending recovery (logdev: internal)
That mount was after (unfortunate) machine reset while it was doing many things.
The question is - what could take so long in here?
Signature · 7 lines
Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/ _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 11 lines · Arkadiusz Miśkiewicz
3.0.17 kernel, 800GB fs, fresh boot, mount of /home at boot (so no daemons running yet), and :
[ 17.768459] XFS (md3): Starting recovery (logdev: internal) [ 872.427061] XFS (md3): Ending recovery (logdev: internal)That mount was after (unfortunate) machine reset while it was doing many things.
The question is - what could take so long in here?
How big is the log? It's entirely possible that your log is full of modified inodes and so it's having to read them all in first. A modified inode only takes a couple of hundred bytes in the log, so even if you have a 100MB log, you can still have a couple of million dirty inodes in the log that have to be read and replayed.
This has been known for some time, but the worse case (around 15 minutes - what you've seen here - is most I've seen or heard reported) is relatively rare so there hasn't been any urgency to solve this:
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs