3.0.23-stable review

@@ -2373,7 +2373,7 @@ static int out_pga_event(struct snd_soc_
 	}
 }
 
-static const char *st_text[] = { "None", "Right", "Left" };
+static const char *st_text[] = { "None", "Left", "Right" };
 
 static const struct soc_enum str_enum =
 	SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);

@@ -697,9 +697,11 @@ static void add_vma_to_mm(struct mm_stru
 	if (vma->vm_file) {
 		mapping = vma->vm_file->f_mapping;
 
+		mutex_lock(&mapping->i_mmap_mutex);
 		flush_dcache_mmap_lock(mapping);
 		vma_prio_tree_insert(vma, &mapping->i_mmap);
 		flush_dcache_mmap_unlock(mapping);
+		mutex_unlock(&mapping->i_mmap_mutex);
 	}
 
 	/* add the VMA to the tree */

@@ -761,9 +763,11 @@ static void delete_vma_from_mm(struct vm
 	if (vma->vm_file) {
 		mapping = vma->vm_file->f_mapping;
 
+		mutex_lock(&mapping->i_mmap_mutex);
 		flush_dcache_mmap_lock(mapping);
 		vma_prio_tree_remove(vma, &mapping->i_mmap);
 		flush_dcache_mmap_unlock(mapping);
+		mutex_unlock(&mapping->i_mmap_mutex);
 	}
 
 	/* remove from the MM's tree and list */

@@ -2061,6 +2065,7 @@ int nommu_shrink_inode_mappings(struct i
 	high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 	down_write(&nommu_region_sem);
+	mutex_lock(&inode->i_mapping->i_mmap_mutex);
 
 	/* search for VMAs that fall within the dead zone */
 	vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,

@@ -2068,6 +2073,7 @@ int nommu_shrink_inode_mappings(struct i
 		/* found one - only interested if it's shared out of the page
 		 * cache */
 		if (vma->vm_flags & VM_SHARED) {
+			mutex_unlock(&inode->i_mapping->i_mmap_mutex);
 			up_write(&nommu_region_sem);
 			return -ETXTBSY; /* not quite true, but near enough */
 		}

@@ -2095,6 +2101,7 @@ int nommu_shrink_inode_mappings(struct i
 		}
 	}
 
+	mutex_unlock(&inode->i_mapping->i_mmap_mutex);
 	up_write(&nommu_region_sem);
 	return 0;
 }

@@ -72,8 +72,8 @@ static unsigned short normal_i2c[] = { 0
 
 static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
 
-#define FAN_FROM_REG(val, div, rpm_range)	((val) == 0 ? -1 : \
-	(val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range)	((val) == 0 || (val) == 255 ? \
+				0 : (rpm_ranges[rpm_range] * 30) / (val))
 #define TEMP_LIMIT_TO_REG(val)	SENSORS_LIMIT((val) / 1000, 0, 255)
 
 /*

@@ -333,7 +333,7 @@ static ssize_t show_fan_input(struct dev
 		return PTR_ERR(data);
 
 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
-		       data->ppr, data->rpm_range));
+		       data->rpm_range));
 }
 
 static ssize_t show_alarm(struct device *dev,

@@ -429,9 +429,9 @@ static int max6639_init_client(struct i2
 	struct max6639_data *data = i2c_get_clientdata(client);
 	struct max6639_platform_data *max6639_info =
 		client->dev.platform_data;
-	int i = 0;
+	int i;
 	int rpm_range = 1; /* default: 4000 RPM */
-	int err = 0;
+	int err;
 
 	/* Reset chip to default values, see below for GCONFIG setup */
 	err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,

@@ -446,11 +446,6 @@ static int max6639_init_client(struct i2
 	else
 		data->ppr = 2;
 	data->ppr -= 1;
-	err = i2c_smbus_write_byte_data(client,
-			MAX6639_REG_FAN_PPR(i),
-			data->ppr << 5);
-	if (err)
-		goto exit;
 
 	if (max6639_info)
 		rpm_range = rpm_range_to_reg(max6639_info->rpm_range);

@@ -458,6 +453,13 @@ static int max6639_init_client(struct i2
 
 	for (i = 0; i < 2; i++) {
 
+		/* Set Fan pulse per revolution */
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_FAN_PPR(i),
+				data->ppr << 6);
+		if (err)
+			goto exit;
+
 		/* Fans config PWM, RPM */
 		err = i2c_smbus_write_byte_data(client,
 			MAX6639_REG_FAN_CONFIG1(i),

@@ -284,7 +284,7 @@ static int ads1015_probe(struct i2c_clie
 			continue;
 		err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
 		if (err)
-			goto exit_free;
+			goto exit_remove;
 	}
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);

@@ -298,7 +298,6 @@ static int ads1015_probe(struct i2c_clie
 exit_remove:
 	for (k = 0; k < ADS1015_CHANNELS; ++k)
 		device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
 	kfree(data);
 exit:
 	return err;

@@ -865,6 +865,7 @@ static void power_pmu_start(struct perf_
 {
 	unsigned long flags;
 	s64 left;
+	unsigned long val;
 
 	if (!event->hw.idx || !event->hw.sample_period)
 		return;

@@ -880,7 +881,12 @@ static void power_pmu_start(struct perf_
 
 	event->hw.state = 0;
 	left = local64_read(&event->hw.period_left);
-	write_pmc(event->hw.idx, left);
+
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+
+	write_pmc(event->hw.idx, val);
 
 	perf_event_update_userpage(event);
 	perf_pmu_enable(event->pmu);

@@ -681,9 +681,7 @@ int r100_irq_process(struct radeon_devic
 			WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
 			break;
 		default:
-			msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
-			WREG32(RADEON_MSI_REARM_EN, msi_rearm);
-			WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+			WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
 			break;
 		}
 	}

@@ -698,9 +698,7 @@ int rs600_irq_process(struct radeon_devi
 			WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
 			break;
 		default:
-			msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
-			WREG32(RADEON_MSI_REARM_EN, msi_rearm);
-			WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+			WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
 			break;
 		}
 	}

@@ -657,6 +657,11 @@ int __devinit pci_scan_bridge(struct pci
 	dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
 		secondary, subordinate, pass);
 
+	if (!primary && (primary != bus->number) && secondary && subordinate) {
+		dev_warn(&dev->dev, "Primary bus is hard wired to 0\n");
+		primary = bus->number;
+	}
+
 	/* Check if setup is sensible at all */
 	if (!pass &&
 	    (primary != bus->number || secondary <= bus->number)) {

@@ -910,6 +910,8 @@ int ieee80211_register_hw(struct ieee802
 		wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
 			    result);
 
+	ieee80211_led_init(local);
+
 	rtnl_lock();
 
 	result = ieee80211_init_rate_ctrl_alg(local,

@@ -931,8 +933,6 @@ int ieee80211_register_hw(struct ieee802
 
 	rtnl_unlock();
 
-	ieee80211_led_init(local);
-
 	local->network_latency_notifier.notifier_call =
 		ieee80211_max_network_latency;
 	result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,

@@ -60,6 +60,7 @@
 #define USB_PRODUCT_IPHONE_3GS  0x1294
 #define USB_PRODUCT_IPHONE_4	0x1297
 #define USB_PRODUCT_IPHONE_4_VZW 0x129c
+#define USB_PRODUCT_IPHONE_4S	0x12a0
 
 #define IPHETH_USBINTF_CLASS    255
 #define IPHETH_USBINTF_SUBCLASS 253

@@ -103,6 +104,10 @@ static struct usb_device_id ipheth_table
 		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ipheth_table);

@@ -1119,6 +1119,8 @@ ecryptfs_setxattr(struct dentry *dentry,
 	}
 
 	rc = vfs_setxattr(lower_dentry, name, value, size, flags);
+	if (!rc)
+		fsstack_copy_attr_all(dentry->d_inode, lower_dentry->d_inode);
 out:
 	return rc;
 }

@@ -1917,6 +1917,10 @@ static void cxt5051_init_mic_port(struct
 	snd_hda_codec_write(codec, nid, 0,
 			    AC_VERB_SET_UNSOLICITED_ENABLE,
 			    AC_USRSP_EN | event);
+}
+
+static void cxt5051_init_mic_jack(struct hda_codec *codec, hda_nid_t nid)
+{
 	snd_hda_input_jack_add(codec, nid, SND_JACK_MICROPHONE, NULL);
 	snd_hda_input_jack_report(codec, nid);
 }

@@ -1934,7 +1938,6 @@ static int cxt5051_init(struct hda_codec
 	struct conexant_spec *spec = codec->spec;
 
 	conexant_init(codec);
-	conexant_init_jacks(codec);
 
 	if (spec->auto_mic & AUTO_MIC_PORTB)
 		cxt5051_init_mic_port(codec, 0x17, CXT5051_PORTB_EVENT);

@@ -2067,6 +2070,12 @@ static int patch_cxt5051(struct hda_code
 	if (spec->beep_amp)
 		snd_hda_attach_beep_device(codec, spec->beep_amp);
 
+	conexant_init_jacks(codec);
+	if (spec->auto_mic & AUTO_MIC_PORTB)
+		cxt5051_init_mic_jack(codec, 0x17);
+	if (spec->auto_mic & AUTO_MIC_PORTC)
+		cxt5051_init_mic_jack(codec, 0x18);
+
 	return 0;
 }
 

@@ -251,6 +251,9 @@ static struct mmc_blk_ioc_data *mmc_blk_
 		goto idata_err;
 	}
 
+	if (!idata->buf_bytes)
+		return idata;
+
 	idata->buf = kzalloc(idata->buf_bytes, GFP_KERNEL);
 	if (!idata->buf) {
 		err = -ENOMEM;

@@ -297,25 +300,6 @@ static int mmc_blk_ioctl_cmd(struct bloc
 	if (IS_ERR(idata))
 		return PTR_ERR(idata);
 
-	cmd.opcode = idata->ic.opcode;
-	cmd.arg = idata->ic.arg;
-	cmd.flags = idata->ic.flags;
-
-	data.sg = &sg;
-	data.sg_len = 1;
-	data.blksz = idata->ic.blksz;
-	data.blocks = idata->ic.blocks;
-
-	sg_init_one(data.sg, idata->buf, idata->buf_bytes);
-
-	if (idata->ic.write_flag)
-		data.flags = MMC_DATA_WRITE;
-	else
-		data.flags = MMC_DATA_READ;
-
-	mrq.cmd = &cmd;
-	mrq.data = &data;
-
 	md = mmc_blk_get(bdev->bd_disk);
 	if (!md) {
 		err = -EINVAL;

@@ -328,6 +312,48 @@ static int mmc_blk_ioctl_cmd(struct bloc
 		goto cmd_done;
 	}
 
+	cmd.opcode = idata->ic.opcode;
+	cmd.arg = idata->ic.arg;
+	cmd.flags = idata->ic.flags;
+
+	if (idata->buf_bytes) {
+		data.sg = &sg;
+		data.sg_len = 1;
+		data.blksz = idata->ic.blksz;
+		data.blocks = idata->ic.blocks;
+
+		sg_init_one(data.sg, idata->buf, idata->buf_bytes);
+
+		if (idata->ic.write_flag)
+			data.flags = MMC_DATA_WRITE;
+		else
+			data.flags = MMC_DATA_READ;
+
+		/* data.flags must already be set before doing this. */
+		mmc_set_data_timeout(&data, card);
+
+		/* Allow overriding the timeout_ns for empirical tuning. */
+		if (idata->ic.data_timeout_ns)
+			data.timeout_ns = idata->ic.data_timeout_ns;
+
+		if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
+			/*
+			 * Pretend this is a data transfer and rely on the
+			 * host driver to compute timeout.  When all host
+			 * drivers support cmd.cmd_timeout for R1B, this
+			 * can be changed to:
+			 *
+			 *     mrq.data = NULL;
+			 *     cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
+			 */
+			data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
+		}
+
+		mrq.data = &data;
+	}
+
+	mrq.cmd = &cmd;
+
 	mmc_claim_host(card->host);
 
 	if (idata->ic.is_acmd) {

@@ -336,24 +362,6 @@ static int mmc_blk_ioctl_cmd(struct bloc
 			goto cmd_rel_host;
 	}
 
-	/* data.flags must already be set before doing this. */
-	mmc_set_data_timeout(&data, card);
-	/* Allow overriding the timeout_ns for empirical tuning. */
-	if (idata->ic.data_timeout_ns)
-		data.timeout_ns = idata->ic.data_timeout_ns;
-
-	if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
-		/*
-		 * Pretend this is a data transfer and rely on the host driver
-		 * to compute timeout.  When all host drivers support
-		 * cmd.cmd_timeout for R1B, this can be changed to:
-		 *
-		 *     mrq.data = NULL;
-		 *     cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
-		 */
-		data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
-	}
-
 	mmc_wait_for_req(card->host, &mrq);
 
 	if (cmd.error) {

@@ -1065,6 +1065,8 @@ void nfs4_schedule_stateid_recovery(cons
 {
 	struct nfs_client *clp = server->nfs_client;
 
+	if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
+		nfs_async_inode_return_delegation(state->inode, &state->stateid);
 	nfs4_state_mark_reclaim_nograce(clp, state);
 	nfs4_schedule_state_manager(clp);
 }

@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.

@@ -219,9 +219,16 @@ struct tcf_proto {
 
 struct qdisc_skb_cb {
 	unsigned int		pkt_len;
-	long			data[];
+	unsigned char		data[24];
 };
 
+static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
+{
+	struct qdisc_skb_cb *qcb;
+	BUILD_BUG_ON(sizeof(skb->cb) < sizeof(unsigned int) + sz);
+	BUILD_BUG_ON(sizeof(qcb->data) < sz);
+}
+
 static inline int qdisc_qlen(struct Qdisc *q)
 {
 	return q->q.qlen;

@@ -225,8 +225,7 @@ struct choke_skb_cb {
 
 static inline struct choke_skb_cb *choke_skb_cb(const struct sk_buff *skb)
 {
-	BUILD_BUG_ON(sizeof(skb->cb) <
-		sizeof(struct qdisc_skb_cb) + sizeof(struct choke_skb_cb));
+	qdisc_cb_private_validate(skb, sizeof(struct choke_skb_cb));
 	return (struct choke_skb_cb *)qdisc_skb_cb(skb)->data;
 }
 

@@ -117,8 +117,7 @@ struct netem_skb_cb {
 
 static inline struct netem_skb_cb *netem_skb_cb(struct sk_buff *skb)
 {
-	BUILD_BUG_ON(sizeof(skb->cb) <
-		sizeof(struct qdisc_skb_cb) + sizeof(struct netem_skb_cb));
+	qdisc_cb_private_validate(skb, sizeof(struct netem_skb_cb));
 	return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;
 }
 

@@ -93,8 +93,7 @@ struct sfb_skb_cb {
 
 static inline struct sfb_skb_cb *sfb_skb_cb(const struct sk_buff *skb)
 {
-	BUILD_BUG_ON(sizeof(skb->cb) <
-		sizeof(struct qdisc_skb_cb) + sizeof(struct sfb_skb_cb));
+	qdisc_cb_private_validate(skb, sizeof(struct sfb_skb_cb));
 	return (struct sfb_skb_cb *)qdisc_skb_cb(skb)->data;
 }
 

@@ -44,6 +44,7 @@
 #include <linux/mutex.h>
 
 #include <net/neighbour.h>
+#include <net/sch_generic.h>
 
 #include <asm/atomic.h>
 

@@ -117,8 +118,9 @@ struct ipoib_header {
 	u16	reserved;
 };
 
-struct ipoib_pseudoheader {
-	u8  hwaddr[INFINIBAND_ALEN];
+struct ipoib_cb {
+	struct qdisc_skb_cb	qdisc_cb;
+	u8			hwaddr[INFINIBAND_ALEN];
 };
 
 /* Used for all multicast joins (broadcast, IPv4 mcast and IPv6 mcast) */

122 lines not on this page · raw message

@@ -258,21 +258,14 @@ static int ipoib_mcast_join_finish(struc
 	netif_tx_lock_bh(dev);
 	while (!skb_queue_empty(&mcast->pkt_queue)) {
 		struct sk_buff *skb = skb_dequeue(&mcast->pkt_queue);
-		struct dst_entry *dst = skb_dst(skb);
-		struct neighbour *n = NULL;
 
 		netif_tx_unlock_bh(dev);
 
 		skb->dev = dev;
-		if (dst)
-			n = dst_get_neighbour_raw(dst);
-		if (!dst || !n) {
-			/* put pseudoheader back on for next time */
-			skb_push(skb, sizeof (struct ipoib_pseudoheader));
-		}
 
 		if (dev_queue_xmit(skb))
 			ipoib_warn(priv, "dev_queue_xmit failed to requeue packet\n");
+
 		netif_tx_lock_bh(dev);
 	}
 	netif_tx_unlock_bh(dev);

@@ -3434,14 +3434,20 @@ static inline gro_result_t
 __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff *p;
+	unsigned int maclen = skb->dev->hard_header_len;
 
 	for (p = napi->gro_list; p; p = p->next) {
 		unsigned long diffs;
 
 		diffs = (unsigned long)p->dev ^ (unsigned long)skb->dev;
 		diffs |= p->vlan_tci ^ skb->vlan_tci;
-		diffs |= compare_ether_header(skb_mac_header(p),
-					      skb_gro_mac_header(skb));
+		if (maclen == ETH_HLEN)
+			diffs |= compare_ether_header(skb_mac_header(p),
+						      skb_gro_mac_header(skb));
+		else if (!diffs)
+			diffs = memcmp(skb_mac_header(p),
+				       skb_gro_mac_header(skb),
+				       maclen);
 		NAPI_GRO_CB(p)->same_flow = !diffs;
 		NAPI_GRO_CB(p)->flush = 0;
 	}

@@ -421,7 +421,9 @@ static void veth_dellink(struct net_devi
 	unregister_netdevice_queue(peer, head);
 }
 
-static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
+static const struct nla_policy veth_policy[VETH_INFO_MAX + 1] = {
+	[VETH_INFO_PEER]	= { .len = sizeof(struct ifinfomsg) },
+};
 
 static struct rtnl_link_ops veth_link_ops = {
 	.kind		= DRV_NAME,

@@ -1842,7 +1842,7 @@ vortex_timer(unsigned long data)
 		ok = 1;
 	}
 
-	if (!netif_carrier_ok(dev))
+	if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
 		next_tick = 5*HZ;
 
 	if (vp->medialock)

@@ -2051,8 +2051,10 @@ int ip6_mr_input(struct sk_buff *skb)
 	int err;
 
 	err = ip6mr_fib_lookup(net, &fl6, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	read_lock(&mrt_lock);
 	cache = ip6mr_cache_find(mrt,

@@ -696,8 +696,10 @@ static netdev_tx_t reg_vif_xmit(struct s
 	int err;
 
 	err = ip6mr_fib_lookup(net, &fl6, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	read_lock(&mrt_lock);
 	dev->stats.tx_bytes += skb->len;

@@ -640,6 +640,7 @@ int ip_options_rcv_srr(struct sk_buff *s
 	}
 	if (srrptr <= srrspace) {
 		opt->srr_is_hit = 1;
+		iph->daddr = nexthop;
 		opt->is_changed = 1;
 	}
 	return 0;

@@ -31,6 +31,7 @@
 /** struct ip_options - IP Options
  *
  * @faddr - Saved first hop address
+ * @nexthop - Saved nexthop address in LSRR and SSRR
  * @is_data - Options in __data, rather than skb
  * @is_strictroute - Strict source route
  * @srr_is_hit - Packet destination addr was our one

@@ -41,6 +42,7 @@
  */
 struct ip_options {
 	__be32		faddr;
+	__be32		nexthop;
 	unsigned char	optlen;
 	unsigned char	srr;
 	unsigned char	rr;

@@ -84,7 +84,7 @@ int ip_forward(struct sk_buff *skb)
 
 	rt = skb_rtable(skb);
 
-	if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway)
+	if (opt->is_strictroute && opt->nexthop != rt->rt_gateway)
 		goto sr_failed;
 
 	if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) &&

@@ -568,12 +568,13 @@ void ip_forward_options(struct sk_buff *
 		     ) {
 			if (srrptr + 3 > srrspace)
 				break;
-			if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0)
+			if (memcmp(&opt->nexthop, &optptr[srrptr-1], 4) == 0)
 				break;
 		}
 		if (srrptr + 3 <= srrspace) {
 			opt->is_changed = 1;
 			ip_rt_get_source(&optptr[srrptr-1], skb, rt);
+			ip_hdr(skb)->daddr = opt->nexthop;
 			optptr[2] = srrptr+4;
 		} else if (net_ratelimit())
 			printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");

@@ -640,7 +641,7 @@ int ip_options_rcv_srr(struct sk_buff *s
 	}
 	if (srrptr <= srrspace) {
 		opt->srr_is_hit = 1;
-		iph->daddr = nexthop;
+		opt->nexthop = nexthop;
 		opt->is_changed = 1;
 	}
 	return 0;

@@ -573,8 +573,8 @@ void ip_forward_options(struct sk_buff *
 		}
 		if (srrptr + 3 <= srrspace) {
 			opt->is_changed = 1;
-			ip_rt_get_source(&optptr[srrptr-1], skb, rt);
 			ip_hdr(skb)->daddr = opt->nexthop;
+			ip_rt_get_source(&optptr[srrptr-1], skb, rt);
 			optptr[2] = srrptr+4;
 		} else if (net_ratelimit())
 			printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");

@@ -90,6 +90,16 @@ static inline void flowi4_init_output(st
 	fl4->fl4_dport = dport;
 	fl4->fl4_sport = sport;
 }
+
+/* Reset some input parameters after previous lookup */
+static inline void flowi4_update_output(struct flowi4 *fl4, int oif, __u8 tos,
+					__be32 daddr, __be32 saddr)
+{
+	fl4->flowi4_oif = oif;
+	fl4->flowi4_tos = tos;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+}
 				      
 
 struct flowi6 {

@@ -270,6 +270,7 @@ static inline struct rtable *ip_route_co
 		if (IS_ERR(rt))
 			return rt;
 		ip_rt_put(rt);
+		flowi4_update_output(fl4, oif, tos, fl4->daddr, fl4->saddr);
 	}
 	security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
 	return ip_route_output_flow(net, fl4, sk);

@@ -284,6 +285,9 @@ static inline struct rtable *ip_route_ne
 		fl4->fl4_dport = dport;
 		fl4->fl4_sport = sport;
 		ip_rt_put(rt);
+		flowi4_update_output(fl4, sk->sk_bound_dev_if,
+				     RT_CONN_FLAGS(sk), fl4->daddr,
+				     fl4->saddr);
 		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
 		return ip_route_output_flow(sock_net(sk), fl4, sk);
 	}

@@ -906,7 +906,8 @@ static int arp_process(struct sk_buff *s
 			if (addr_type == RTN_UNICAST  &&
 			    (arp_fwd_proxy(in_dev, dev, rt) ||
 			     arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
-			     pneigh_lookup(&arp_tbl, net, &tip, dev, 0))) {
+			     (rt->dst.dev != dev &&
+			      pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
 				n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
 				if (n)
 					neigh_release(n);

@@ -193,7 +193,7 @@ void netpoll_poll_dev(struct net_device
 
 	poll_napi(dev);
 
-	if (dev->priv_flags & IFF_SLAVE) {
+	if (dev->flags & IFF_SLAVE) {
 		if (dev->npinfo) {
 			struct net_device *bond_dev = dev->master;
 			struct sk_buff *skb;

@@ -381,8 +381,8 @@ static int netem_enqueue(struct sk_buff
 		q->counter = 0;
 
 		__skb_queue_head(&q->qdisc->q, skb);
-		q->qdisc->qstats.backlog += qdisc_pkt_len(skb);
-		q->qdisc->qstats.requeues++;
+		sch->qstats.backlog += qdisc_pkt_len(skb);
+		sch->qstats.requeues++;
 		ret = NET_XMIT_SUCCESS;
 	}
 

@@ -2513,9 +2513,6 @@ static int velocity_close(struct net_dev
 	if (dev->irq != 0)
 		free_irq(dev->irq, dev);
 
-	/* Power down the chip */
-	pci_set_power_state(vptr->pdev, PCI_D3hot);
-
 	velocity_free_rings(vptr);
 
 	vptr->flags &= (~VELOCITY_FLAGS_OPENED);

@@ -650,6 +650,11 @@ static void tcp_v4_send_reset(struct soc
 				      arg.iov[0].iov_len, IPPROTO_TCP, 0);
 	arg.csumoffset = offsetof(struct tcphdr, check) / 2;
 	arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
+	/* When socket is gone, all binding information is lost.
+	 * routing might fail in this case. using iif for oif to
+	 * make sure we can deliver it
+	 */
+	arg.bound_dev_if = sk ? sk->sk_bound_dev_if : inet_iif(skb);
 
 	net = dev_net(skb_dst(skb)->dev);
 	ip_send_reply(net->ipv4.tcp_sock, skb, ip_hdr(skb)->saddr,

@@ -1289,25 +1289,26 @@ static int tcp_match_skb_to_sack(struct
 	return in_sack;
 }
 
-static u8 tcp_sacktag_one(struct sk_buff *skb, struct sock *sk,
-			  struct tcp_sacktag_state *state,
+/* Mark the given newly-SACKed range as such, adjusting counters and hints. */
+static u8 tcp_sacktag_one(struct sock *sk,
+			  struct tcp_sacktag_state *state, u8 sacked,
+			  u32 start_seq, u32 end_seq,
 			  int dup_sack, int pcount)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
-	u8 sacked = TCP_SKB_CB(skb)->sacked;
 	int fack_count = state->fack_count;
 
 	/* Account D-SACK for retransmitted packet. */
 	if (dup_sack && (sacked & TCPCB_RETRANS)) {
 		if (tp->undo_marker && tp->undo_retrans &&
-		    after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
+		    after(end_seq, tp->undo_marker))
 			tp->undo_retrans--;
 		if (sacked & TCPCB_SACKED_ACKED)
 			state->reord = min(fack_count, state->reord);
 	}
 
 	/* Nothing to do; acked frame is about to be dropped (was ACKed). */
-	if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
+	if (!after(end_seq, tp->snd_una))
 		return sacked;
 
 	if (!(sacked & TCPCB_SACKED_ACKED)) {

@@ -1326,13 +1327,13 @@ static u8 tcp_sacktag_one(struct sk_buff
 				/* New sack for not retransmitted frame,
 				 * which was in hole. It is reordering.
 				 */
-				if (before(TCP_SKB_CB(skb)->seq,
+				if (before(start_seq,
 					   tcp_highest_sack_seq(tp)))
 					state->reord = min(fack_count,
 							   state->reord);
 
 				/* SACK enhanced F-RTO (RFC4138; Appendix B) */
-				if (!after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark))
+				if (!after(end_seq, tp->frto_highmark))
 					state->flag |= FLAG_ONLY_ORIG_SACKED;
 			}
 

@@ -1350,8 +1351,7 @@ static u8 tcp_sacktag_one(struct sk_buff
 
 		/* Lost marker hint past SACKed? Tweak RFC3517 cnt */
 		if (!tcp_is_fack(tp) && (tp->lost_skb_hint != NULL) &&
-		    before(TCP_SKB_CB(skb)->seq,
-			   TCP_SKB_CB(tp->lost_skb_hint)->seq))
+		    before(start_seq, TCP_SKB_CB(tp->lost_skb_hint)->seq))
 			tp->lost_cnt_hint += pcount;
 
 		if (fack_count > tp->fackets_out)

@@ -1407,7 +1407,11 @@ static int tcp_shifted_skb(struct sock *
 	}
 
 	/* We discard results */
-	tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
+	tcp_sacktag_one(sk, state,
+			TCP_SKB_CB(skb)->sacked,
+			TCP_SKB_CB(skb)->seq,
+			TCP_SKB_CB(skb)->end_seq,
+			dup_sack, pcount);
 
 	/* Difference in this won't matter, both ACKed by the same cumul. ACK */
 	TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);

@@ -1646,10 +1650,14 @@ static struct sk_buff *tcp_sacktag_walk(
 			break;
 
 		if (in_sack) {
-			TCP_SKB_CB(skb)->sacked = tcp_sacktag_one(skb, sk,
-								  state,
-								  dup_sack,
-								  tcp_skb_pcount(skb));
+			TCP_SKB_CB(skb)->sacked =
+				tcp_sacktag_one(sk,
+						state,
+						TCP_SKB_CB(skb)->sacked,
+						TCP_SKB_CB(skb)->seq,
+						TCP_SKB_CB(skb)->end_seq,
+						dup_sack,
+						tcp_skb_pcount(skb));
 
 			if (!before(TCP_SKB_CB(skb)->seq,
 				    tcp_highest_sack_seq(tp)))

@@ -1370,6 +1370,9 @@ static u8 tcp_sacktag_one(struct sock *s
 	return sacked;
 }
 
+/* Shift newly-SACKed bytes from this skb to the immediately previous
+ * already-SACKed sk_buff. Mark the newly-SACKed bytes as such.
+ */
 static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
 			   struct tcp_sacktag_state *state,
 			   unsigned int pcount, int shifted, int mss,

@@ -1377,12 +1380,11 @@ static int tcp_shifted_skb(struct sock *
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
+	u32 start_seq = TCP_SKB_CB(skb)->seq;	/* start of newly-SACKed */
+	u32 end_seq = start_seq + shifted;	/* end of newly-SACKed */
 
 	BUG_ON(!pcount);
 
-	if (skb == tp->lost_skb_hint)
-		tp->lost_cnt_hint += pcount;
-
 	TCP_SKB_CB(prev)->end_seq += shifted;
 	TCP_SKB_CB(skb)->seq += shifted;
 

@@ -1406,12 +1408,11 @@ static int tcp_shifted_skb(struct sock *
 		skb_shinfo(skb)->gso_type = 0;
 	}
 
-	/* We discard results */
-	tcp_sacktag_one(sk, state,
-			TCP_SKB_CB(skb)->sacked,
-			TCP_SKB_CB(skb)->seq,
-			TCP_SKB_CB(skb)->end_seq,
-			dup_sack, pcount);
+	/* Adjust counters and hints for the newly sacked sequence range but
+	 * discard the return value since prev is already marked.
+	 */
+	tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+			start_seq, end_seq, dup_sack, pcount);
 
 	/* Difference in this won't matter, both ACKed by the same cumul. ACK */
 	TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);

@@ -1385,6 +1385,10 @@ static int tcp_shifted_skb(struct sock *
 
 	BUG_ON(!pcount);
 
+	/* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
+	if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
+		tp->lost_cnt_hint += pcount;
+
 	TCP_SKB_CB(prev)->end_seq += shifted;
 	TCP_SKB_CB(skb)->seq += shifted;
 

@@ -1373,7 +1373,12 @@ static void rt_del(unsigned hash, struct
 void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 		    __be32 saddr, struct net_device *dev)
 {
+	int s, i;
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
+	struct rtable *rt;
+	__be32 skeys[2] = { saddr, 0 };
+	int    ikeys[2] = { dev->ifindex, 0 };
+	struct flowi4 fl4;
 	struct inet_peer *peer;
 	struct net *net;
 

@@ -1396,13 +1401,34 @@ void ip_rt_redirect(__be32 old_gw, __be3
 			goto reject_redirect;
 	}
 
-	peer = inet_getpeer_v4(daddr, 1);
-	if (peer) {
-		peer->redirect_learned.a4 = new_gw;
-
-		inet_putpeer(peer);
-
-		atomic_inc(&__rt_peer_genid);
+	memset(&fl4, 0, sizeof(fl4));
+	fl4.daddr = daddr;
+	for (s = 0; s < 2; s++) {
+		for (i = 0; i < 2; i++) {
+			fl4.flowi4_oif = ikeys[i];
+			fl4.saddr = skeys[s];
+			rt = __ip_route_output_key(net, &fl4);
+			if (IS_ERR(rt))
+				continue;
+
+			if (rt->dst.error || rt->dst.dev != dev ||
+			    rt->rt_gateway != old_gw) {
+				ip_rt_put(rt);
+				continue;
+			}
+
+			if (!rt->peer)
+				rt_bind_peer(rt, rt->rt_dst, 1);
+
+			peer = rt->peer;
+			if (peer) {
+				peer->redirect_learned.a4 = new_gw;
+				atomic_inc(&__rt_peer_genid);
+			}
+
+			ip_rt_put(rt);
+			return;
+		}
 	}
 	return;
 

@@ -1369,16 +1369,41 @@ static void rt_del(unsigned hash, struct
 	spin_unlock_bh(rt_hash_lock_addr(hash));
 }
 
+static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+{
+	struct rtable *rt = (struct rtable *) dst;
+	__be32 orig_gw = rt->rt_gateway;
+	struct neighbour *n, *old_n;
+
+	dst_confirm(&rt->dst);
+
+	rt->rt_gateway = peer->redirect_learned.a4;
+	n = __arp_bind_neighbour(&rt->dst, rt->rt_gateway);
+	if (IS_ERR(n))
+		return PTR_ERR(n);
+	old_n = xchg(&rt->dst._neighbour, n);
+	if (old_n)
+		neigh_release(old_n);
+	if (!n || !(n->nud_state & NUD_VALID)) {
+		if (n)
+			neigh_event_send(n, NULL);
+		rt->rt_gateway = orig_gw;
+		return -EAGAIN;
+	} else {
+		rt->rt_flags |= RTCF_REDIRECTED;
+		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
+	}
+	return 0;
+}
+
 /* called in rcu_read_lock() section */
 void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 		    __be32 saddr, struct net_device *dev)
 {
 	int s, i;
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
-	struct rtable *rt;
 	__be32 skeys[2] = { saddr, 0 };
 	int    ikeys[2] = { dev->ifindex, 0 };
-	struct flowi4 fl4;
 	struct inet_peer *peer;
 	struct net *net;
 

@@ -1401,33 +1426,42 @@ void ip_rt_redirect(__be32 old_gw, __be3
 			goto reject_redirect;
 	}
 
-	memset(&fl4, 0, sizeof(fl4));
-	fl4.daddr = daddr;
 	for (s = 0; s < 2; s++) {
 		for (i = 0; i < 2; i++) {
-			fl4.flowi4_oif = ikeys[i];
-			fl4.saddr = skeys[s];
-			rt = __ip_route_output_key(net, &fl4);
-			if (IS_ERR(rt))
-				continue;
-
-			if (rt->dst.error || rt->dst.dev != dev ||
-			    rt->rt_gateway != old_gw) {
-				ip_rt_put(rt);
-				continue;
-			}
-
-			if (!rt->peer)
-				rt_bind_peer(rt, rt->rt_dst, 1);
-
-			peer = rt->peer;
-			if (peer) {
-				peer->redirect_learned.a4 = new_gw;
-				atomic_inc(&__rt_peer_genid);
+			unsigned int hash;
+			struct rtable __rcu **rthp;
+			struct rtable *rt;
+
+			hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net));
+
+			rthp = &rt_hash_table[hash].chain;
+
+			while ((rt = rcu_dereference(*rthp)) != NULL) {
+				rthp = &rt->dst.rt_next;
+
+				if (rt->rt_key_dst != daddr ||
+				    rt->rt_key_src != skeys[s] ||
+				    rt->rt_oif != ikeys[i] ||
+				    rt_is_input_route(rt) ||
+				    rt_is_expired(rt) ||
+				    !net_eq(dev_net(rt->dst.dev), net) ||
+				    rt->dst.error ||
+				    rt->dst.dev != dev ||
+				    rt->rt_gateway != old_gw)
+					continue;
+
+				if (!rt->peer)
+					rt_bind_peer(rt, rt->rt_dst, 1);
+
+				peer = rt->peer;
+				if (peer) {
+					if (peer->redirect_learned.a4 != new_gw) {
+						peer->redirect_learned.a4 = new_gw;
+						atomic_inc(&__rt_peer_genid);
+					}
+					check_peer_redir(&rt->dst, peer);
+				}
 			}
-
-			ip_rt_put(rt);
-			return;
 		}
 	}
 	return;

@@ -1715,33 +1749,6 @@ static void ip_rt_update_pmtu(struct dst
 	}
 }
 
-static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
-{
-	struct rtable *rt = (struct rtable *) dst;
-	__be32 orig_gw = rt->rt_gateway;
-	struct neighbour *n, *old_n;
-
-	dst_confirm(&rt->dst);
-
-	rt->rt_gateway = peer->redirect_learned.a4;
-	n = __arp_bind_neighbour(&rt->dst, rt->rt_gateway);
-	if (IS_ERR(n))
-		return PTR_ERR(n);
-	old_n = xchg(&rt->dst._neighbour, n);
-	if (old_n)
-		neigh_release(old_n);
-	if (!n || !(n->nud_state & NUD_VALID)) {
-		if (n)
-			neigh_event_send(n, NULL);
-		rt->rt_gateway = orig_gw;
-		return -EAGAIN;
-	} else {
-		rt->rt_flags |= RTCF_REDIRECTED;
-		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
-	}
-	return 0;
-}
-
 static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
 {
 	struct rtable *rt = (struct rtable *) dst;

@@ -136,6 +136,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */

@@ -788,7 +788,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),

@@ -803,7 +802,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },

@@ -828,7 +826,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },

@@ -836,7 +833,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),

@@ -846,7 +842,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },

@@ -865,8 +860,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },

@@ -887,28 +880,18 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },

@@ -1083,127 +1066,27 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },

@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },

@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {

@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },

@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 	{ }
 };
 

@@ -49,6 +49,10 @@
 #define MTS_MT9234ZBA_PRODUCT_ID	0xF115
 #define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID		0x1a61
+#define ABBOTT_PRODUCT_ID		0x3410
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02

@@ -62,12 +62,6 @@
 #define USB_PORT_FEAT_TEST              21
 #define USB_PORT_FEAT_INDICATOR         22
 #define USB_PORT_FEAT_C_PORT_L1         23
-#define USB_PORT_FEAT_C_PORT_LINK_STATE	25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET     28
-#define USB_PORT_FEAT_C_BH_PORT_RESET   29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
 
 /*
  * Port feature selectors added by USB 3.0 spec.

@@ -76,8 +70,8 @@
 #define USB_PORT_FEAT_LINK_STATE		5
 #define USB_PORT_FEAT_U1_TIMEOUT		23
 #define USB_PORT_FEAT_U2_TIMEOUT		24
-#define USB_PORT_FEAT_C_LINK_STATE		25
-#define USB_PORT_FEAT_C_CONFIG_ERR		26
+#define USB_PORT_FEAT_C_PORT_LINK_STATE		25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
 #define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
 #define USB_PORT_FEAT_BH_PORT_RESET		28
 #define USB_PORT_FEAT_C_BH_PORT_RESET		29

@@ -871,7 +871,17 @@ static void __devinit quirk_usb_early_ha
 	 */
 	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
 		return;
+	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+		return;
 
+	if (pci_enable_device(pdev) < 0) {
+		dev_warn(&pdev->dev, "Can't enable PCI device, "
+				"BIOS handoff failed.\n");
+		return;
+	}
 	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
 		quirk_usb_handoff_uhci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)

@@ -880,5 +890,6 @@ static void __devinit quirk_usb_early_ha
 		quirk_usb_disable_ehci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
+	pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);

@@ -75,7 +75,7 @@ static void xhci_usb2_hub_descriptor(str
 	 */
 	memset(port_removable, 0, sizeof(port_removable));
 	for (i = 0; i < ports; i++) {
-		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
 		/* If a device is removable, PORTSC reports a 0, same as in the
 		 * hub descriptor DeviceRemovable bits.
 		 */

@@ -1002,26 +1002,42 @@ static unsigned int xhci_parse_exponent_
 }
 
 /*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
  * microframes, rounded down to nearest power of 2.
  */
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
-		struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+		struct usb_host_endpoint *ep, unsigned int desc_interval,
+		unsigned int min_exponent, unsigned int max_exponent)
 {
 	unsigned int interval;
 
-	interval = fls(8 * ep->desc.bInterval) - 1;
-	interval = clamp_val(interval, 3, 10);
-	if ((1 << interval) != 8 * ep->desc.bInterval)
+	interval = fls(desc_interval) - 1;
+	interval = clamp_val(interval, min_exponent, max_exponent);
+	if ((1 << interval) != desc_interval)
 		dev_warn(&udev->dev,
 			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
 			 ep->desc.bEndpointAddress,
 			 1 << interval,
-			 8 * ep->desc.bInterval);
+			 desc_interval);
 
 	return interval;
 }
 
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval * 8, 3, 10);
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field

@@ -1040,7 +1056,7 @@ static unsigned int xhci_get_endpoint_in
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
 		    usb_endpoint_xfer_bulk(&ep->desc)) {
-			interval = ep->desc.bInterval;
+			interval = xhci_parse_microframe_interval(udev, ep);
 			break;
 		}
 		/* Fall through - SS and HS isoc/int have same decoding */

@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub
 	if (type == HUB_INIT3)
 		goto init3;
 
-	/* After a resume, port power should still be on.
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
 	 * For any other type of activation, turn it on.
 	 */
 	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
 
 		/* Speed up system boot by using a delayed_work for the
 		 * hub's initial power-up delays.  This is pretty awkward

@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub
 		goto fail;
 	}
 
-	if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
-		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_SET_DEPTH, USB_RT_HUB,
-				hdev->level - 1, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-
-		if (ret < 0) {
-			message = "can't set hub depth";
-			goto fail;
-		}
-	}
-
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
 	 * but the hub can/will return fewer bytes here.

@@ -29,7 +29,7 @@ extern unsigned int sig_xstate_size;
 extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
+extern void math_state_restore(void);
 extern void __math_state_restore(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 

@@ -745,10 +745,10 @@ void __math_state_restore(void)
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
  * Don't touch unless you *really* know how it works.
  *
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
+ * Must be called with kernel preemption disabled (eg with local
+ * local interrupts as in the case of do_device_not_available).
  */
-asmlinkage void math_state_restore(void)
+void math_state_restore(void)
 {
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = thread->task;

@@ -307,9 +307,54 @@ static inline void __clear_fpu(struct ta
 	}
 }
 
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: TS_USEDFPU must be clear (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+	return !(current_thread_info()->status & TS_USEDFPU) &&
+		(read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+	struct pt_regs *regs = get_irq_regs();
+	return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+	return !in_interrupt() ||
+		interrupted_user_mode() ||
+		interrupted_kernel_fpu_idle();
+}
+
 static inline void kernel_fpu_begin(void)
 {
 	struct thread_info *me = current_thread_info();
+
+	WARN_ON_ONCE(!irq_fpu_usable());
 	preempt_disable();
 	if (me->status & TS_USEDFPU)
 		__save_init_fpu(me->task);

@@ -323,14 +368,6 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
-static inline bool irq_fpu_usable(void)
-{
-	struct pt_regs *regs;
-
-	return !in_interrupt() || !(regs = get_irq_regs()) || \
-		user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
  * DNA fault but don't modify SSE registers. And these instructions

@@ -367,6 +404,7 @@ static inline void irq_ts_restore(int TS
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
+	WARN_ON_ONCE(task_thread_info(tsk)->status & TS_USEDFPU);
 	preempt_disable();
 	__save_init_fpu(tsk);
 	stts();

@@ -777,6 +777,7 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 dotraplinkage void __kprobes
 do_device_not_available(struct pt_regs *regs, long error_code)
 {
+	WARN_ON_ONCE(!user_mode_vm(regs));
 #ifdef CONFIG_MATH_EMULATION
 	if (read_cr0() & X86_CR0_EM) {
 		struct math_emu_info info = { };

@@ -404,7 +404,7 @@ static inline void irq_ts_restore(int TS
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
-	WARN_ON_ONCE(task_thread_info(tsk)->status & TS_USEDFPU);
+	WARN_ON_ONCE(!(task_thread_info(tsk)->status & TS_USEDFPU));
 	preempt_disable();
 	__save_init_fpu(tsk);
 	stts();

@@ -400,6 +400,48 @@ static inline void irq_ts_restore(int TS
 }
 
 /*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+	return current_thread_info()->status & TS_USEDFPU;
+}
+
+static inline void user_fpu_end(void)
+{
+	preempt_disable();
+	current_thread_info()->status &= ~TS_USEDFPU;
+	stts();
+	preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+	preempt_disable();
+	if (!user_has_fpu()) {
+		clts();
+		current_thread_info()->status |= TS_USEDFPU;
+	}
+	preempt_enable();
+}
+
+/*
  * These disable preemption on their own and are safe
  */
 static inline void save_init_fpu(struct task_struct *tsk)

@@ -777,7 +777,6 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 dotraplinkage void __kprobes
 do_device_not_available(struct pt_regs *regs, long error_code)
 {
-	WARN_ON_ONCE(!user_mode_vm(regs));
 #ifdef CONFIG_MATH_EMULATION
 	if (read_cr0() & X86_CR0_EM) {
 		struct math_emu_info info = { };

@@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf)
 	if (!used_math())
 		return 0;
 
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (user_has_fpu()) {
 		if (use_xsave())
 			err = xsave_user(buf);
 		else

@@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf)
 
 		if (err)
 			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		user_fpu_end();
 	} else {
 		sanitize_i387_state(tsk);
 		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,

@@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf
 			return err;
 	}
 
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
+	user_fpu_begin();
 	if (use_xsave())
 		err = restore_user_xstate(buf);
 	else

@@ -259,7 +259,6 @@ static inline void fpu_save_init(struct
 static inline void __save_init_fpu(struct task_struct *tsk)
 {
 	fpu_save_init(&tsk->thread.fpu);
-	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
 static inline int fpu_fxrstor_checking(struct fpu *fpu)

@@ -290,6 +289,7 @@ static inline void __unlazy_fpu(struct t
 {
 	if (task_thread_info(tsk)->status & TS_USEDFPU) {
 		__save_init_fpu(tsk);
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
 		stts();
 	} else
 		tsk->fpu_counter = 0;

@@ -356,9 +356,11 @@ static inline void kernel_fpu_begin(void
 
 	WARN_ON_ONCE(!irq_fpu_usable());
 	preempt_disable();
-	if (me->status & TS_USEDFPU)
+	if (me->status & TS_USEDFPU) {
 		__save_init_fpu(me->task);
-	else
+		me->status &= ~TS_USEDFPU;
+		/* We do 'stts()' in kernel_fpu_end() */
+	} else
 		clts();
 }
 

@@ -449,6 +451,7 @@ static inline void save_init_fpu(struct
 	WARN_ON_ONCE(!(task_thread_info(tsk)->status & TS_USEDFPU));
 	preempt_disable();
 	__save_init_fpu(tsk);
+	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 	stts();
 	preempt_enable();
 }

@@ -280,6 +280,47 @@ static inline int restore_fpu_checking(s
 }
 
 /*
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
+ */
+static inline int __thread_has_fpu(struct thread_info *ti)
+{
+	return ti->status & TS_USEDFPU;
+}
+
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct thread_info *ti)
+{
+	ti->status &= ~TS_USEDFPU;
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct thread_info *ti)
+{
+	ti->status |= TS_USEDFPU;
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct thread_info *ti)
+{
+	__thread_clear_has_fpu(ti);
+	stts();
+}
+
+static inline void __thread_fpu_begin(struct thread_info *ti)
+{
+	clts();
+	__thread_set_has_fpu(ti);
+}
+
+/*
  * Signal frame handlers...
  */
 extern int save_i387_xstate(void __user *buf);

@@ -287,23 +328,21 @@ extern int restore_i387_xstate(void __us
 
 static inline void __unlazy_fpu(struct task_struct *tsk)
 {
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (__thread_has_fpu(task_thread_info(tsk))) {
 		__save_init_fpu(tsk);
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		__thread_fpu_end(task_thread_info(tsk));
 	} else
 		tsk->fpu_counter = 0;
 }
 
 static inline void __clear_fpu(struct task_struct *tsk)
 {
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (__thread_has_fpu(task_thread_info(tsk))) {
 		/* Ignore delayed exceptions from user space */
 		asm volatile("1: fwait\n"
 			     "2:\n"
 			     _ASM_EXTABLE(1b, 2b));
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		__thread_fpu_end(task_thread_info(tsk));
 	}
 }
 

@@ -311,14 +350,14 @@ static inline void __clear_fpu(struct ta
  * Were we in an interrupt that interrupted kernel mode?
  *
  * We can do a kernel_fpu_begin/end() pair *ONLY* if that
- * pair does nothing at all: TS_USEDFPU must be clear (so
+ * pair does nothing at all: the thread must not have fpu (so
  * that we don't try to save the FPU state), and TS must
  * be set (so that the clts/stts pair does nothing that is
  * visible in the interrupted kernel thread).
  */
 static inline bool interrupted_kernel_fpu_idle(void)
 {
-	return !(current_thread_info()->status & TS_USEDFPU) &&
+	return !__thread_has_fpu(current_thread_info()) &&
 		(read_cr0() & X86_CR0_TS);
 }
 

@@ -356,9 +395,9 @@ static inline void kernel_fpu_begin(void
 
 	WARN_ON_ONCE(!irq_fpu_usable());
 	preempt_disable();
-	if (me->status & TS_USEDFPU) {
+	if (__thread_has_fpu(me)) {
 		__save_init_fpu(me->task);
-		me->status &= ~TS_USEDFPU;
+		__thread_clear_has_fpu(me);
 		/* We do 'stts()' in kernel_fpu_end() */
 	} else
 		clts();

@@ -422,24 +461,21 @@ static inline void irq_ts_restore(int TS
  */
 static inline int user_has_fpu(void)
 {
-	return current_thread_info()->status & TS_USEDFPU;
+	return __thread_has_fpu(current_thread_info());
 }
 
 static inline void user_fpu_end(void)
 {
 	preempt_disable();
-	current_thread_info()->status &= ~TS_USEDFPU;
-	stts();
+	__thread_fpu_end(current_thread_info());
 	preempt_enable();
 }
 
 static inline void user_fpu_begin(void)
 {
 	preempt_disable();
-	if (!user_has_fpu()) {
-		clts();
-		current_thread_info()->status |= TS_USEDFPU;
-	}
+	if (!user_has_fpu())
+		__thread_fpu_begin(current_thread_info());
 	preempt_enable();
 }
 

@@ -448,11 +484,10 @@ static inline void user_fpu_begin(void)
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
-	WARN_ON_ONCE(!(task_thread_info(tsk)->status & TS_USEDFPU));
+	WARN_ON_ONCE(!__thread_has_fpu(task_thread_info(tsk)));
 	preempt_disable();
 	__save_init_fpu(tsk);
-	task_thread_info(tsk)->status &= ~TS_USEDFPU;
-	stts();
+	__thread_fpu_end(task_thread_info(tsk));
 	preempt_enable();
 }
 

@@ -734,7 +734,7 @@ void __math_state_restore(void)
 		return;
 	}
 
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
+	__thread_set_has_fpu(thread);	/* clts in caller! */
 	tsk->fpu_counter++;
 }
 

@@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_s
 	if (!fx)
 		return;
 
-	BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+	BUG_ON(__thread_has_fpu(task_thread_info(tsk)));
 
 	xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
 

@@ -948,7 +948,7 @@ static void __vmx_load_host_state(struct
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 #endif
-	if (current_thread_info()->status & TS_USEDFPU)
+	if (__thread_has_fpu(current_thread_info()))
 		clts();
 	load_gdt(&__get_cpu_var(host_gdt));
 }

@@ -30,7 +30,6 @@ extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
 extern void math_state_restore(void);
-extern void __math_state_restore(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
 extern user_regset_active_fn fpregs_active, xfpregs_active;

@@ -293,23 +293,11 @@ __switch_to(struct task_struct *prev_p,
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
-	bool preload_fpu;
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
 	__unlazy_fpu(prev_p);
 
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
-
 	/*
 	 * Reload esp0.
 	 */

@@ -348,11 +336,6 @@ __switch_to(struct task_struct *prev_p,
 		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/* If we're going to preload the fpu context, make sure clts
-	   is run while we're batching the cpu state updates. */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so

@@ -362,9 +345,6 @@ __switch_to(struct task_struct *prev_p,
 	 */
 	arch_end_context_switch(next_p);
 
-	if (preload_fpu)
-		__math_state_restore();
-
 	/*
 	 * Restore %gs if needed (which is common)
 	 */

@@ -377,18 +377,6 @@ __switch_to(struct task_struct *prev_p,
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
-	bool preload_fpu;
-
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:

@@ -421,10 +409,6 @@ __switch_to(struct task_struct *prev_p,
 	/* Must be after DS reload */
 	__unlazy_fpu(prev_p);
 
-	/* Make sure cpu is ready for new context */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so

@@ -483,13 +467,6 @@ __switch_to(struct task_struct *prev_p,
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/*
-	 * Preload the FPU context, now that we've determined that the
-	 * task is likely to be using it. 
-	 */
-	if (preload_fpu)
-		__math_state_restore();
-
 	return prev_p;
 }
 

@@ -717,28 +717,6 @@ asmlinkage void __attribute__((weak)) sm
 }
 
 /*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use.  Used during context switch.
- */
-void __math_state_restore(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
-
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(tsk))) {
-		stts();
-		force_sig(SIGSEGV, tsk);
-		return;
-	}
-
-	__thread_set_has_fpu(thread);	/* clts in caller! */
-	tsk->fpu_counter++;
-}
-
-/*
  * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
  *

@@ -768,9 +746,18 @@ void math_state_restore(void)
 		local_irq_disable();
 	}
 
-	clts();				/* Allow maths ops (or we recurse) */
+	__thread_fpu_begin(thread);
 
-	__math_state_restore();
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		__thread_fpu_end(thread);
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
+
+	tsk->fpu_counter++;
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 

@@ -211,15 +211,6 @@ static inline void fpu_fxsave(struct fpu
 
 #endif	/* CONFIG_X86_64 */
 
-/* We need a safe address that is cheap to find and that is already
-   in L1 during context switch. The best choices are unfortunately
-   different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
 /*
  * These must be called with preempt disabled
  */

@@ -243,16 +234,6 @@ static inline void fpu_save_init(struct
 
 	if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
 		asm volatile("fnclex");
-
-	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
-	   is pending.  Clear the x87 state here by setting it to fixed
-	   values. safe_address is a random variable that should be in L1 */
-	alternative_input(
-		ASM_NOP8 ASM_NOP2,
-		"emms\n\t"	  	/* clear stack tags */
-		"fildl %P[addr]",	/* set F?P to defined value */
-		X86_FEATURE_FXSAVE_LEAK,
-		[addr] "m" (safe_address));
 }
 
 static inline void __save_init_fpu(struct task_struct *tsk)

@@ -378,6 +378,8 @@ __switch_to(struct task_struct *prev_p,
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
 
+	__unlazy_fpu(prev_p);
+
 	/*
 	 * Reload esp0, LDT and the page table pointer:
 	 */

@@ -406,9 +408,6 @@ __switch_to(struct task_struct *prev_p,
 
 	load_TLS(next, cpu);
 
-	/* Must be after DS reload */
-	__unlazy_fpu(prev_p);
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so

@@ -731,6 +731,10 @@ void math_state_restore(void)
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = thread->task;
 
+	/* We need a safe address that is cheap to find and that is already
+	   in L1. We just brought in "thread->task", so use that */
+#define safe_address (thread->task)
+
 	if (!tsk_used_math(tsk)) {
 		local_irq_enable();
 		/*

@@ -748,6 +752,16 @@ void math_state_restore(void)
 
 	__thread_fpu_begin(thread);
 
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. safe_address is a random variable that should be in L1 */
+	alternative_input(
+		ASM_NOP8 ASM_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %P[addr]",	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (safe_address));
+
 	/*
 	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
 	 */

@@ -264,21 +264,21 @@ static inline int restore_fpu_checking(s
  * be preemption protection *and* they need to be
  * properly paired with the CR0.TS changes!
  */
-static inline int __thread_has_fpu(struct thread_info *ti)
+static inline int __thread_has_fpu(struct task_struct *tsk)
 {
-	return ti->status & TS_USEDFPU;
+	return tsk->thread.has_fpu;
 }
 
 /* Must be paired with an 'stts' after! */
-static inline void __thread_clear_has_fpu(struct thread_info *ti)
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
 {
-	ti->status &= ~TS_USEDFPU;
+	tsk->thread.has_fpu = 0;
 }
 
 /* Must be paired with a 'clts' before! */
-static inline void __thread_set_has_fpu(struct thread_info *ti)
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
 {
-	ti->status |= TS_USEDFPU;
+	tsk->thread.has_fpu = 1;
 }
 
 /*

@@ -288,16 +288,16 @@ static inline void __thread_set_has_fpu(
  * These generally need preemption protection to work,
  * do try to avoid using these on their own.
  */
-static inline void __thread_fpu_end(struct thread_info *ti)
+static inline void __thread_fpu_end(struct task_struct *tsk)
 {
-	__thread_clear_has_fpu(ti);
+	__thread_clear_has_fpu(tsk);
 	stts();
 }
 
-static inline void __thread_fpu_begin(struct thread_info *ti)
+static inline void __thread_fpu_begin(struct task_struct *tsk)
 {
 	clts();
-	__thread_set_has_fpu(ti);
+	__thread_set_has_fpu(tsk);
 }
 
 /*

@@ -308,21 +308,21 @@ extern int restore_i387_xstate(void __us
 
 static inline void __unlazy_fpu(struct task_struct *tsk)
 {
-	if (__thread_has_fpu(task_thread_info(tsk))) {
+	if (__thread_has_fpu(tsk)) {
 		__save_init_fpu(tsk);
-		__thread_fpu_end(task_thread_info(tsk));
+		__thread_fpu_end(tsk);
 	} else
 		tsk->fpu_counter = 0;
 }
 
 static inline void __clear_fpu(struct task_struct *tsk)
 {
-	if (__thread_has_fpu(task_thread_info(tsk))) {
+	if (__thread_has_fpu(tsk)) {
 		/* Ignore delayed exceptions from user space */
 		asm volatile("1: fwait\n"
 			     "2:\n"
 			     _ASM_EXTABLE(1b, 2b));
-		__thread_fpu_end(task_thread_info(tsk));
+		__thread_fpu_end(tsk);
 	}
 }
 

@@ -337,7 +337,7 @@ static inline void __clear_fpu(struct ta
  */
 static inline bool interrupted_kernel_fpu_idle(void)
 {
-	return !__thread_has_fpu(current_thread_info()) &&
+	return !__thread_has_fpu(current) &&
 		(read_cr0() & X86_CR0_TS);
 }
 

@@ -371,12 +371,12 @@ static inline bool irq_fpu_usable(void)
 
 static inline void kernel_fpu_begin(void)
 {
-	struct thread_info *me = current_thread_info();
+	struct task_struct *me = current;
 
 	WARN_ON_ONCE(!irq_fpu_usable());
 	preempt_disable();
 	if (__thread_has_fpu(me)) {
-		__save_init_fpu(me->task);
+		__save_init_fpu(me);
 		__thread_clear_has_fpu(me);
 		/* We do 'stts()' in kernel_fpu_end() */
 	} else

@@ -441,13 +441,13 @@ static inline void irq_ts_restore(int TS
  */
 static inline int user_has_fpu(void)
 {
-	return __thread_has_fpu(current_thread_info());
+	return __thread_has_fpu(current);
 }
 
 static inline void user_fpu_end(void)
 {
 	preempt_disable();
-	__thread_fpu_end(current_thread_info());
+	__thread_fpu_end(current);
 	preempt_enable();
 }
 

@@ -455,7 +455,7 @@ static inline void user_fpu_begin(void)
 {
 	preempt_disable();
 	if (!user_has_fpu())
-		__thread_fpu_begin(current_thread_info());
+		__thread_fpu_begin(current);
 	preempt_enable();
 }
 

@@ -464,10 +464,10 @@ static inline void user_fpu_begin(void)
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
-	WARN_ON_ONCE(!__thread_has_fpu(task_thread_info(tsk)));
+	WARN_ON_ONCE(!__thread_has_fpu(tsk));
 	preempt_disable();
 	__save_init_fpu(tsk);
-	__thread_fpu_end(task_thread_info(tsk));
+	__thread_fpu_end(tsk);
 	preempt_enable();
 }