Skip to contentSkip to conversation

Please pull u-boot-ti/master

U-Boot Tom Rini 2 participants 4 messages Mar 19, 2012 – Mar 26, 2012

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

Hello,

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

are available in the git repository at:

git://git.denx.de/u-boot-ti master

Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting devkit8000/spl: init GPMC for dm9000 in SPL omap-common/spl: Add linux boot to SPL omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm

Stefano Babic (4):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL

Tom Rini (1):
cam_enc_4xx: Rename 'images' to 'imgs'

 arch/arm/cpu/armv7/Makefile               |    2 -
 arch/arm/cpu/armv7/cpu.c                  |    2 +
 arch/arm/cpu/armv7/omap-common/spl.c      |   46 ++++-
 arch/arm/cpu/armv7/omap-common/spl_nand.c |   47 ++++-
 arch/arm/cpu/armv7/omap3/board.c          |    2 +
 arch/arm/include/asm/bootm.h              |   26 +++
 arch/arm/include/asm/omap_common.h        |    2 +
 arch/arm/lib/Makefile                     |    5 +-
 arch/arm/lib/bootm.c                      |  341 +++++++++++++++--------------
 board/ait/cam_enc_4xx/cam_enc_4xx.c       |   48 ++--
 board/technexion/twister/twister.c        |   23 ++
 board/timll/devkit8000/devkit8000.c       |   37 +++
 common/Makefile                           |    1 +
 common/cmd_spl.c                          |  188 ++++++++++++++++
 doc/README.commands.spl                   |   31 +++
 include/cmd_spl.h                         |   31 +++
 include/configs/devkit8000.h              |   15 +-
 include/configs/twister.h                 |   12 +
 include/image.h                           |    2 +
 19 files changed, 662 insertions(+), 199 deletions(-)
 create mode 100644 arch/arm/include/asm/bootm.h
 create mode 100644 common/cmd_spl.c
 create mode 100644 doc/README.commands.spl
 create mode 100644 include/cmd_spl.h

These patches have been in progress for quite some time and Wolfgang has requested that they go in now rather than after the upcoming release.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120319/bc493770/attachment.pgp>
author
#1 lore raw
Quoted 5 lines · Tom Rini

Hello,

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

[snip]

This pull request is now updated as such:

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

are available in the git repository at:

git://git.denx.de/u-boot-ti master

Christian Riesch (1):
calimain, enbw_cmc: Fix typo in comments

Grazvydas Ignotas (1):
twl4030: fix potential power supply handling issues

Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting devkit8000/spl: init GPMC for dm9000 in SPL omap-common/spl: Add linux boot to SPL omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm

Stefano Babic (8):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL
NAND: TI: fix warnings in omap_gpmc.c
OMAP3: mt_ventoux: updated timing for FPGA
OMAP3: mt_ventoux: sets its own mtdparts
Davinci: ea20: use gpio framework to access gpios

Tom Rini (1):
cam_enc_4xx: Rename 'images' to 'imgs'

jacopo mondi (1):
omap3_spi: receive transmit mode

 arch/arm/cpu/armv7/Makefile               |    2 -
 arch/arm/cpu/armv7/cpu.c                  |    2 +
 arch/arm/cpu/armv7/omap-common/spl.c      |   46 ++++-
 arch/arm/cpu/armv7/omap-common/spl_nand.c |   47 ++++-
 arch/arm/cpu/armv7/omap3/board.c          |    2 +
 arch/arm/include/asm/bootm.h              |   26 +++
 arch/arm/include/asm/omap_common.h        |    2 +
 arch/arm/lib/Makefile                     |    5 +-
 arch/arm/lib/bootm.c                      |  341 +++++++++++++++--------------
 board/ait/cam_enc_4xx/cam_enc_4xx.c       |   48 ++--
 board/davinci/ea20/ea20.c                 |   38 +---
 board/enbw/enbw_cmc/enbw_cmc.c            |    2 +-
 board/omicron/calimain/calimain.c         |    2 +-
 board/technexion/twister/twister.c        |   23 ++
 board/teejet/mt_ventoux/mt_ventoux.h      |   11 +-
 board/timll/devkit8000/devkit8000.c       |   37 +++
 common/Makefile                           |    1 +
 common/cmd_spl.c                          |  188 ++++++++++++++++
 doc/README.commands.spl                   |   31 +++
 drivers/mtd/nand/omap_gpmc.c              |   14 +-
 drivers/power/twl4030.c                   |   18 ++-
 drivers/spi/omap3_spi.c                   |   66 ++++++-
 drivers/spi/omap3_spi.h                   |    2 +
 include/cmd_spl.h                         |   31 +++
 include/configs/devkit8000.h              |   15 +-
 include/configs/ea20.h                    |    2 +
 include/configs/mt_ventoux.h              |   10 +
 include/configs/twister.h                 |   12 +
 include/image.h                           |    2 +
 29 files changed, 777 insertions(+), 249 deletions(-)
 create mode 100644 arch/arm/include/asm/bootm.h
 create mode 100644 common/cmd_spl.c
 create mode 100644 doc/README.commands.spl
 create mode 100644 include/cmd_spl.h
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120326/f059a7a5/attachment.pgp>
#2 lore raw

Hi Tom,

Le 26/03/2012 19:36, Tom Rini a ?crit :

Quoted 80 lines · Tom Rini
Quoted 5 lines

Hello,

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

[snip]

This pull request is now updated as such:

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

are available in the git repository at:

git://git.denx.de/u-boot-ti master

Christian Riesch (1):
calimain, enbw_cmc: Fix typo in comments

Grazvydas Ignotas (1):
twl4030: fix potential power supply handling issues

Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting devkit8000/spl: init GPMC for dm9000 in SPL omap-common/spl: Add linux boot to SPL omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm

Stefano Babic (8):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL
NAND: TI: fix warnings in omap_gpmc.c
OMAP3: mt_ventoux: updated timing for FPGA
OMAP3: mt_ventoux: sets its own mtdparts
Davinci: ea20: use gpio framework to access gpios

Tom Rini (1):
cam_enc_4xx: Rename 'images' to 'imgs'

jacopo mondi (1):
omap3_spi: receive transmit mode

  arch/arm/cpu/armv7/Makefile               |    2 -
  arch/arm/cpu/armv7/cpu.c                  |    2 +
  arch/arm/cpu/armv7/omap-common/spl.c      |   46 ++++-
  arch/arm/cpu/armv7/omap-common/spl_nand.c |   47 ++++-
  arch/arm/cpu/armv7/omap3/board.c          |    2 +
  arch/arm/include/asm/bootm.h              |   26 +++
  arch/arm/include/asm/omap_common.h        |    2 +
  arch/arm/lib/Makefile                     |    5 +-
  arch/arm/lib/bootm.c                      |  341 +++++++++++++++--------------
  board/ait/cam_enc_4xx/cam_enc_4xx.c       |   48 ++--
  board/davinci/ea20/ea20.c                 |   38 +---
  board/enbw/enbw_cmc/enbw_cmc.c            |    2 +-
  board/omicron/calimain/calimain.c         |    2 +-
  board/technexion/twister/twister.c        |   23 ++
  board/teejet/mt_ventoux/mt_ventoux.h      |   11 +-
  board/timll/devkit8000/devkit8000.c       |   37 +++
  common/Makefile                           |    1 +
  common/cmd_spl.c                          |  188 ++++++++++++++++
  doc/README.commands.spl                   |   31 +++
  drivers/mtd/nand/omap_gpmc.c              |   14 +-
  drivers/power/twl4030.c                   |   18 ++-
  drivers/spi/omap3_spi.c                   |   66 ++++++-
  drivers/spi/omap3_spi.h                   |    2 +
  include/cmd_spl.h                         |   31 +++
  include/configs/devkit8000.h              |   15 +-
  include/configs/ea20.h                    |    2 +
  include/configs/mt_ventoux.h              |   10 +
  include/configs/twister.h                 |   12 +
  include/image.h                           |    2 +
  29 files changed, 777 insertions(+), 249 deletions(-)
Quoted 4 lines

create mode 100644 arch/arm/include/asm/bootm.h
create mode 100644 common/cmd_spl.c
create mode 100644 doc/README.commands.spl
create mode 100644 include/cmd_spl.h

Applied to u-boot-arm/master, thanks.

Amicalement,

Signature · 1 line
Albert.
#3 lore raw

Le 26/03/2012 22:45, Albert ARIBAUD a ?crit :

Quoted 90 lines

Hi Tom,

Le 26/03/2012 19:36, Tom Rini a ?crit :

Quoted 81 lines · Tom Rini
Quoted 6 lines

Hello,

The following changes since commit
32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

[snip]

This pull request is now updated as such:

The following changes since commit
32ec258f829808dd7cf74fd83ba999fdaaeab715:
Marek Vasut (1):
IXP: Fix GPIO_INT_ACT_LOW_SET()

are available in the git repository at:

git://git.denx.de/u-boot-ti master

Christian Riesch (1):
calimain, enbw_cmc: Fix typo in comments

Grazvydas Ignotas (1):
twl4030: fix potential power supply handling issues

Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting
devkit8000/spl: init GPMC for dm9000 in SPL
omap-common/spl: Add linux boot to SPL
omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm

Stefano Babic (8):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL
NAND: TI: fix warnings in omap_gpmc.c
OMAP3: mt_ventoux: updated timing for FPGA
OMAP3: mt_ventoux: sets its own mtdparts
Davinci: ea20: use gpio framework to access gpios

Tom Rini (1):
cam_enc_4xx: Rename 'images' to 'imgs'

jacopo mondi (1):
omap3_spi: receive transmit mode

arch/arm/cpu/armv7/Makefile | 2 - arch/arm/cpu/armv7/cpu.c | 2 + arch/arm/cpu/armv7/omap-common/spl.c | 46 ++++- arch/arm/cpu/armv7/omap-common/spl_nand.c | 47 ++++- arch/arm/cpu/armv7/omap3/board.c | 2 + arch/arm/include/asm/bootm.h | 26 +++ arch/arm/include/asm/omap_common.h | 2 + arch/arm/lib/Makefile | 5 +- arch/arm/lib/bootm.c | 341 +++++++++++++++-------------- board/ait/cam_enc_4xx/cam_enc_4xx.c | 48 ++-- board/davinci/ea20/ea20.c | 38 +--- board/enbw/enbw_cmc/enbw_cmc.c | 2 +- board/omicron/calimain/calimain.c | 2 +- board/technexion/twister/twister.c | 23 ++ board/teejet/mt_ventoux/mt_ventoux.h | 11 +- board/timll/devkit8000/devkit8000.c | 37 +++ common/Makefile | 1 +
common/cmd_spl.c | 188 ++++++++++++++++ doc/README.commands.spl | 31 +++ drivers/mtd/nand/omap_gpmc.c | 14 +-

drivers/power/twl4030.c | 18 ++-
drivers/spi/omap3_spi.c | 66 ++++++-
drivers/spi/omap3_spi.h | 2 +

include/cmd_spl.h | 31 +++
include/configs/devkit8000.h | 15 +-
include/configs/ea20.h | 2 +
include/configs/mt_ventoux.h | 10 +
include/configs/twister.h | 12 +
include/image.h | 2 +

Quoted 5 lines
29 files changed, 777 insertions(+), 249 deletions(-)

create mode 100644 arch/arm/include/asm/bootm.h
create mode 100644 common/cmd_spl.c
create mode 100644 doc/README.commands.spl
create mode 100644 include/cmd_spl.h

Quoted 3 lines

Applied to u-boot-arm/master, thanks.

Amicalement,

Correction: the "arm: Add Prep subcommand support to bootm" commit does not apply cleanly to the u-boot tree. I am rolling by my tree. Please rebase on it and re-request a pull.

Amicalement,

Signature · 1 line
Albert.