md/raid5:Fix recover/replace stop and start repreatedly if handle stipe failed,because one disk had bad blocks.

From 759a61519343c64066a5a14bb97447878aa1297e Mon Sep 17 00:00:00 2001
From: majianpeng <[email protected]>
Date: Mon, 19 Mar 2012 15:59:04 +0800
Subject: [PATCH] md/raid5:Fix recover/replace stop and start repreatedly if
handle stipe failed,because one disk had bad blocks.

When raid5 recovering,then failed because one disk had bad blocks. The sync_request() return value which larger than 0 and set MD_RECOVERY_INTR.Because the statement if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) first call,so the mddev->curr_resync did not change. After the sync done,the mddev->curr_resync did not change.So the resync_thread will stop and start repeatedly.

---
 drivers/md/md.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

index ce88755..370c9d9 100644
@@ -7261,11 +7261,12 @@ void md_do_sync(struct mddev *mddev)
 			atomic_add(sectors, &mddev->recovery_active);
 		}
 
-		if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
-			break;
 
 		j += sectors;
 		if (j>1) mddev->curr_resync = j;
+
+		if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
+			break;
 		mddev->curr_mark_cnt = io_sectors;
 		if (last_check == 0)
 			/* this is the earliest that rebuild will be

1.7.5.4

 				
--------------
kedacomkernel
2012-03-19