x86: Remove deprecated disable_hlt and enable_hlt
Subsystems (4)
PATCH v3 1/1 x86: Remove deprecated disable_hlt and enable_hlt
From: Len Brown <[email protected]>
The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax().
This workaround was commented:
"disable hlt during certain critical i/o operations"
"This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove."
H. Peter Anvin additionally adds:
"To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail.
They were by far in the minority even back then."
Alan Cox further says:
"Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray.
Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use."
So, let's finally drop this.
---
Rebased to 3.4-rc0
Documentation/feature-removal-schedule.txt | 8 ------- arch/x86/include/asm/system.h | 7 ------ arch/x86/kernel/process.c | 24 ------------------- drivers/block/floppy.c | 36 ---------------------------- 4 files changed, 75 deletions(-)
Documentation/feature-removal-schedule.txt +0 -8
@@ -6,14 +6,6 @@ be removed from this file. --------------------------- -What: x86 floppy disable_hlt -When: 2012 -Why: ancient workaround of dubious utility clutters the - code used by everybody else. -Who: Len Brown <[email protected]> - ---------------------------- - What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle When: 2012 Why: This optional sub-feature of APM is of dubious reliability,
arch/x86/include/asm/system.h +0 -7
@@ -93,10 +93,6 @@ do { \ "memory"); \ } while (0) -/* -* disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT #else /* frame pointer must be last for get_wchan */
@@ -392,9 +388,6 @@ static inline void clflush(volatile void *__p)#define nop () asm volatile ("nop") -void disable_hlt (void ); -void enable_hlt (void ); -void cpu_idle_wait (void );extern unsigned long arch_align_stack (unsigned long sp);
arch/x86/kernel/process.c +0 -24
@@ -342,34 +342,10 @@ void (*pm_idle)(void);EXPORT_SYMBOL (pm_idle);#endif -#ifdef CONFIG_X86_32 -/* -* This halt magic was a workaround for ancient floppy DMA -* wreckage. It should be safe to remove. -*/ -static int hlt_counter; -void disable_hlt (void ) -{ - hlt_counter++; -} -EXPORT_SYMBOL (disable_hlt); - -void enable_hlt (void ) -{ - hlt_counter--; -} -EXPORT_SYMBOL (enable_hlt); - -static inline int hlt_use_halt (void ) -{ -return (!hlt_counter && boot_cpu_data.hlt_works_ok); -} -#else static inline int hlt_use_halt (void ) {return 1 ; } -#endif /* * We use this if we don't have any better
drivers/block/floppy.c +0 -36
@@ -1031,37 +1031,6 @@ static int fd_wait_for_completion(unsigned long delay, timeout_fn function)return 0 ; } -static DEFINE_SPINLOCK (floppy_hlt_lock); -static int hlt_disabled; -static void floppy_disable_hlt (void ) -{ -unsigned long flags; - -WARN_ONCE (1 ,"floppy_disable_hlt() scheduled for removal in 2012" ); -spin_lock_irqsave (&floppy_hlt_lock, flags); -if (!hlt_disabled) { - hlt_disabled =1 ; -#ifdef HAVE_DISABLE_HLT -disable_hlt (); -#endif - } -spin_unlock_irqrestore (&floppy_hlt_lock, flags); -} - -static void floppy_enable_hlt (void ) -{ -unsigned long flags; - -spin_lock_irqsave (&floppy_hlt_lock, flags); -if (hlt_disabled) { - hlt_disabled =0 ; -#ifdef HAVE_DISABLE_HLT -enable_hlt (); -#endif - } -spin_unlock_irqrestore (&floppy_hlt_lock, flags); -} -static void setup_DMA (void ) {unsigned long f;
@@ -1106,7 +1075,6 @@ static void setup_DMA(void)fd_enable_dma ();release_dma_lock (f);#endif -floppy_disable_hlt (); }static void show_floppy (void );
@@ -1708,7 +1676,6 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)fd_disable_dma ();release_dma_lock (f); -floppy_enable_hlt (); do_floppy =NULL ;if (fdc >=N_FDC ||FDCS ->address ==-1 ) {/* we don't even know which FDC is the culprit */
@@ -1857,8 +1824,6 @@ static void floppy_shutdown(unsigned long data)show_floppy ();cancel_activity (); -floppy_enable_hlt (); - flags =claim_dma_lock ();fd_disable_dma ();release_dma_lock (flags);
@@ -4509,7 +4474,6 @@ static void floppy_release_irq_and_dma(void)#if N_FDC >1 set_dor (1 , ~8 ,0 );#endif -floppy_enable_hlt ();if (floppy_track_buffer && max_buffer_sectors) { tmpsize = max_buffer_sectors *1024 ;
Signature · 1 line
1.7.9.3
Quoted 1 line · On Wed, 28 Mar 2012 11:03:00 -0400 Josh Boyer <[email protected]> wrote:
From: Len Brown <[email protected]>
Nope, it's [email protected] and/or [email protected].
I've been using both addresses for Len lately - I think some people's @kernel.org addresses are now dead. I don't know about Len, but mine has died and I haven't set about working out how to resurrect it.
Quoted 3 lines
The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside
default_idle()withcpu_relax().
Quoted 10 lines · Andrew Morton
Quoted 1 line · On Wed, 28 Mar 2012 11:03:00 -0400 Josh Boyer <[email protected]> wrote:
From: Len Brown <[email protected]>
Nope, it's [email protected] and/or [email protected].
I've been using both addresses for Len lately - I think some people's @kernel.org addresses are now dead. I don't know about Len, but mine has died and I haven't set about working out how to resurrect it.
Well, crap. I got the S-o-b and CC right. Not sure how I flubbed that. Sorry Len.
josh