Skip to contentSkip to conversation

staging: comedi: adv_pci_dio: remove CheckAndAllocCard()

PATCH In review H Hartley Sweeten 2 participants 2 messages Jul 19, 2012 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 22/90 staging: comedi: adv_pci_dio: remove CheckAndAllocCard()

This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list.

Cc Ian Abbott <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
---
 drivers/staging/comedi/drivers/adv_pci_dio.c | 39 +---------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)
drivers/staging/comedi/drivers/adv_pci_dio.c +1 -38
index e1f52c6..ab92169 100644
@@ -382,8 +382,6 @@ static const struct dio_boardtype boardtypes[] = {
 };
 
 struct pci_dio_private {
-	struct pci_dio_private *prev;	/*  previous private struct */
-	struct pci_dio_private *next;	/*  next private struct */
 	struct pci_dev *pcidev;	/*  pointer to board's pci_dev */
 	char valid;		/*  card is usable */
 	char GlobalIrqEnabled;	/*  1= any IRQ source is enabled */
@@ -404,8 +402,6 @@ struct pci_dio_private {
 	unsigned short IDIFiltrHigh[8];	/*  IDI's filter value high signal */
 };
 
-static struct pci_dio_private *pci_priv;	/* list of allocated cards */
-
 #define devpriv ((struct pci_dio_private *)dev->private)
 #define this_board ((const struct dio_boardtype *)dev->board_ptr)
 
@@ -1055,38 +1051,12 @@ static int pci_dio_add_8254(struct comedi_device *dev,
 	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int CheckAndAllocCard(struct comedi_device *dev,
-			     struct comedi_devconfig *it,
-			     struct pci_dev *pcidev)
-{
-	struct pci_dio_private *pr, *prev;
-
-	for (pr = pci_priv, prev = NULL; pr != NULL; prev = pr, pr = pr->next) {
-		if (pr->pcidev == pcidev)
-			return 0; /* this card is used, look for another */
-
-	}
-
-	if (prev) {
-		devpriv->prev = prev;
-		prev->next = devpriv;
-	} else {
-		pci_priv = devpriv;
-	}
-
-	return 1;
-}
-
 static struct pci_dev *pci_dio_find_pci_dev(struct comedi_device *dev,
 					    struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev = NULL;
 	unsigned long iobase;
 	int i;
-	int ret;
 
 	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
@@ -1103,8 +1073,7 @@ static struct pci_dev *pci_dio_find_pci_dev(struct comedi_device *dev,
 					continue;
 				}
 			}
-			ret = CheckAndAllocCard(dev, it, pcidev);
-			if (ret != 1)
+			if (pci_is_enabled(pcidev))
 				continue;
 			dev->board_ptr = boardtypes + i;
 			break;
@@ -1260,12 +1229,6 @@ static void pci_dio_detach(struct comedi_device *dev)
 				comedi_pci_disable(devpriv->pcidev);
 			pci_dev_put(devpriv->pcidev);
 		}
-		if (devpriv->prev)
-			devpriv->prev->next = devpriv->next;
-		else
-			pci_priv = devpriv->next;
-		if (devpriv->next)
-			devpriv->next->prev = devpriv->prev;
 	}
 }
 
Signature · 1 line
1.7.11
#1 lore raw
Quoted 5 lines · H Hartley Sweeten

This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list.

As mentioned in my replies to your patches to adv_pci1723 and adv_pci1710, pci_is_enabled() might not be sufficient. I think it's better just to take out the free/in-use test.

Signature · 2 lines
-=( Ian Abbott @ MEV Ltd.    E-mail: <[email protected]>        )=-
-=( Tel: +44 (0)161 477 1898   FAX: +44 (0)161 718 3587         )=-