staging: comedi: dt3000: cleanup "find pci device" code
PATCH 65/90 staging: comedi: dt3000: cleanup "find pci device" code
The "find pci device" code for this driver was split between two functions which could cause the driver to walk the pci bus multiple times while looking for a match.
Consolidate the functions into the format that is more standard for the comedi pci drivers.
Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ian Abbott <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
--- drivers/staging/comedi/drivers/dt3000.c | 85 ++++++++++++--------------------- 1 file changed, 31 insertions(+), 54 deletions(-)
drivers/staging/comedi/drivers/dt3000.c +31 -54
@@ -159,7 +159,6 @@ static const struct dt3k_boardtype dt3k_boardtypes[] = { }, }; -#define n_dt3k_boards sizeof(dt3k_boardtypes)/sizeof(struct dt3k_boardtype)#define this_board ((const struct dt3k_boardtype *)dev->board_ptr)#define DT3000_SIZE (4*0x1000)
@@ -797,87 +796,65 @@ static int setup_pci(struct comedi_device *dev)return 0 ; } -static struct pci_dev *dt_pci_find_device (struct pci_dev *from,int *board) +static struct pci_dev *dt3000_find_pci_dev (struct comedi_device *dev, +struct comedi_devconfig *it) { +struct pci_dev *pcidev =NULL ; +int bus = it->options[0 ]; +int slot = it->options[1 ];int i; -for (from =pci_get_device (PCI_VENDOR_ID_DT ,PCI_ANY_ID , from); - from !=NULL ; - from =pci_get_device (PCI_VENDOR_ID_DT ,PCI_ANY_ID , from)) { -for (i =0 ; i < n_dt3k_boards; i++) { -if (from->device == dt3k_boardtypes[i].device_id) { - *board = i; -return from; - } +for_each_pci_dev (pcidev) { +if (bus || slot) { +if (bus != pcidev->bus->number || + slot !=PCI_SLOT (pcidev->devfn)) +continue ; } -printk - ("unknown Data Translation PCI device found with device_id=0x%04x\n" , - from->device); - } - *board =-1 ; -return from; -} - -static int dt_pci_probe (struct comedi_device *dev,int bus,int slot) -{ -int board; -int ret; -struct pci_dev *pcidev; - - pcidev =NULL ; -while ((pcidev =dt_pci_find_device (pcidev, &board)) !=NULL ) { -if ((bus ==0 && slot ==0 ) || - (pcidev->bus->number == bus && -PCI_SLOT (pcidev->devfn) == slot)) { -break ; +if (pcidev->vendor !=PCI_VENDOR_ID_DT ) +continue ; +for (i =0 ; i <ARRAY_SIZE (dt3k_boardtypes); i++) { +if (dt3k_boardtypes[i].device_id != pcidev->device) +continue ; + dev->board_ptr = dt3k_boardtypes + i; +return pcidev; } } - devpriv->pci_dev = pcidev; - -if (board >=0 ) - dev->board_ptr = dt3k_boardtypes + board; - -if (!devpriv->pci_dev) -return 0 ; - - ret =setup_pci (dev); -if (ret <0 ) -return ret; - -return 1 ; +dev_err (dev->class_dev, +"No supported board found! (req. bus %d, slot %d)\n" , + bus, slot); +return NULL ; }static int dt3000_attach (struct comedi_device *dev,struct comedi_devconfig *it) { +struct pci_dev *pcidev;struct comedi_subdevice *s; -int bus, slot;int ret =0 ;dev_dbg (dev->class_dev,"dt3000:\n" ); - bus = it->options[0 ]; - slot = it->options[1 ]; ret =alloc_private (dev,sizeof (struct dt3k_private ));if (ret <0 )return ret; - ret =dt_pci_probe (dev, bus, slot); + pcidev =dt3000_find_pci_dev (dev, it); +if (!pcidev) +return -EIO ; + devpriv->pci_dev = pcidev; + + ret =setup_pci (dev);if (ret <0 )return ret; -if (ret ==0 ) { -dev_warn (dev->class_dev,"no DT board found\n" ); -return -ENODEV ; - } dev->board_name = this_board->name; -if (request_irq (devpriv->pci_dev->irq, dt3k_interrupt,IRQF_SHARED , +if (request_irq (pcidev->irq, dt3k_interrupt,IRQF_SHARED ,"dt3000" , dev)) {dev_err (dev->class_dev,"unable to allocate IRQ %u\n" , - devpriv->pci_dev->irq); + pcidev->irq);return -EINVAL ; } - dev->irq = devpriv->pci_dev->irq; + dev->irq = pcidev->irq; ret =comedi_alloc_subdevices (dev,4 );if (ret)
Signature · 1 line
1.7.11
Quoted 3 lines · H Hartley Sweeten
The "find pci device" code for this driver was split between two functions which could cause the driver to walk the pci bus multiple times while looking for a match.
Actually the original version only walks through the PCI devices once (due to the from parameter in dt_pci_find_device()), but your version is cleaner.
Signature · 2 lines
-=( Ian Abbott @ MEV Ltd. E-mail: <[email protected]> )=- -=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-