include/linux/pm_domain.h:252:2: error: too many arguments to function '__pm_g
PATCH 22/38 include/linux/pm_domain.h:252:2: error: too many arguments to function '__pm_g
Hi Rafael,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: 9ea3f7070730c4148694904a335825f7e4540604 commit: 3fca1aaa84488678c2b57d9b35259bbd4efd86ca [22/38] PM / Domains: Make it possible to use domain names when adding devices config: sh-allnoconfig (attached as .config)
All related error/warning messages:
In file included from drivers/sh/pm_runtime.c:15:0:include/linux/pm_domain.h: In function 'pm_genpd_of_add_device':include/linux/pm_domain.h:252:2: error: too many arguments to function '__pm_genpd_of_add_device'include/linux/pm_domain.h:182:19: note: declared hereinclude/linux/pm_domain.h: In function 'pm_genpd_name_add_device':include/linux/pm_domain.h:258:2: warning: passing argument 1 of '__pm_genpd_name_add_device' discards 'const' qualifier from pointer target type [enabled by default] include/linux/pm_domain.h:187:19: note: expected 'char *' but argument is of type 'const char *'
vim +252 include/linux/pm_domain.h
249 static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
250 struct device *dev)
251 {
Quoted 1 line
252 return
__pm_genpd_of_add_device(genpd_node, dev, NULL);
253 }
254
255 static inline int pm_genpd_name_add_device(const char *domain_name,
---
0-DAY kernel build testing backend Open Source Technology Centre
Fengguang Wu <[email protected]> Intel Corporation
#
# Automatically generated file; DO NOT EDIT.
# Linux/sh 3.6.0-rc1 Kernel Configuration
#CONFIG_SUPERH=yCONFIG_SUPERH32=y
# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=yCONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_CMT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_NO_IOPORT=yCONFIG_DMA_NONCOHERENT=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=yCONFIG_IRQ_WORK=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not setCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_MAY_HAVE_SPARSE_IRQ=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# Timers subsystem
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=17
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_ANON_INODES=yCONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not setCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_CLK=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
#
# GCOV-based kernel profiling
#CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System type
#CONFIG_CPU_SH2=yCONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_SH7201 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7264 is not set
# CONFIG_CPU_SUBTYPE_SH7269 is not set
# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7734 is not set
# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SH7786 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
#
# Memory management options
#CONFIG_QUICKLIST=yCONFIG_PAGE_OFFSET=0x00000000CONFIG_FORCE_MAX_ZONEORDER=14CONFIG_MEMORY_START=0x08000000CONFIG_MEMORY_SIZE=0x04000000
# CONFIG_29BIT is not setCONFIG_32BIT=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_MAX_ACTIVE_REGIONS=1CONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not setCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_STATIC=yCONFIG_HAVE_MEMBLOCK=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_ARCH_DISCARD_MEMBLOCK=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_NR_QUICK=1CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
#
# Cache configuration
#
# CONFIG_CACHE_WRITEBACK is not setCONFIG_CACHE_WRITETHROUGH=y
# CONFIG_CACHE_OFF is not set
#
# Processor features
#CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
#
# Board support
#
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
#
# Timer and clock configuration
#
# CONFIG_SH_TIMER_CMT is not setCONFIG_SH_PCLK_FREQ=31250000CONFIG_SH_CLK_CPG=yCONFIG_SH_CLK_CPG_LEGACY=y
#
# CPU Frequency scaling
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
#
# Companion Chips
#
#
# Additional SuperH Device Drivers
#
# CONFIG_HEARTBEAT is not set
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not setCONFIG_PHYSICAL_START=0x08000000CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_GUSA=y
#
# SuperH / SH-Mobile Driver Options
#CONFIG_SH_INTC=y
#
# Interrupt controller options
#
#
# Pin function controller options
#
#
# Boot options
#CONFIG_ZERO_PAGE_OFFSET=0x00001000CONFIG_BOOT_LINK_OFFSET=0x00800000CONFIG_ENTRY_OFFSET=0x00001000
#
# Bus options
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# Executable file formats
#
# CONFIG_BINFMT_ELF_FDPIC is not set
# CONFIG_BINFMT_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
#
# Misc devices
#
# CONFIG_ATMEL_PWM is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline #
#
# Altera FPGA firmware download module
#
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options. #CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB_SH_MOBILE_MERAM is not set
# CONFIG_SOUND is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not setCONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not setCONFIG_CLKDEV_LOOKUP=y
#
# Hardware Spinlock drivers
#
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
#
# File systems
#
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DUMP_CODE is not set
# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITYFS is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not setCONFIG_HAS_IOMEM=yCONFIG_HAS_DMA=yCONFIG_GENERIC_ATOMIC64=yCONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
Re: [pm:linux-next 22/38] include/linux/pm_domain.h:252:2: error: too many arguments to function '__
Hi,
Quoted 19 lines · Fengguang Wu
Hi Rafael,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: 9ea3f7070730c4148694904a335825f7e4540604 commit: 3fca1aaa84488678c2b57d9b35259bbd4efd86ca [22/38] PM / Domains: Make it possible to use domain names when adding devices config: sh-allnoconfig (attached as .config)All related error/warning messages:
In file included from
drivers/sh/pm_runtime.c:15:0:include/linux/pm_domain.h: In function 'pm_genpd_of_add_device':include/linux/pm_domain.h:252:2: error: too many arguments to function '__pm_genpd_of_add_device'include/linux/pm_domain.h:182:19: note: declared hereinclude/linux/pm_domain.h: In function 'pm_genpd_name_add_device':include/linux/pm_domain.h:258:2: warning: passing argument 1 of '__pm_genpd_name_add_device' discards 'const' qualifier from pointer target type [enabled by default]include/linux/pm_domain.h:187:19: note: expected 'char *' but argument is of type 'const char *'
Quoted 9 lines
vim +252
include/linux/pm_domain.h
249 static inline int pm_genpd_of_add_device(structdevice_node*genpd_node,
250 struct device *dev)
251 {Quoted 1 line
252 return
__pm_genpd_of_add_device(genpd_node, dev, NULL);253 }
254
255 static inline int pm_genpd_name_add_device(const char*domain_name,
That is due to CONFIG_PM_GENERIC_DOMAINS unset. Should be fixed now.
Thanks,
Rafael