compat-wireless:rt2800usb: Added rx packet length validity check
Quoted 7 lines · Sergei Poselenov
On our system (ARM Cortex-M3 SOC running linux-2.6.33 with compat-wireless-3.4-rc3-1 modules configured for rt2x00) frequent crashes were observed in rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. In case of the bad length, mark the packet as with CRC error.
Nice find! However this is a *real* patch that must go upstream, so you should submit it to the rt2800usb maintainers and also mark the patch as a stable fix. You mark the patch as a stable fix by appending at the bottom of the commit log message: Cc: [email protected]. For example:
commit e19f15ac6437624b6214b2f0ec0d69fb7eb205fa
Author: Rajkumar Manoharan <[email protected]> Date: Thu Aug 9 12:37:26 2012 +0530
ath9k: stop btcoex on device suspend
During suspend, the device will be moved to FULLSLEEP state. As btcoex is never been stopped, the btcoex timer is running and tries to access hw on fullsleep state. Fix that.
Once you submit if you want it merged into a stable compat-wireless release even before Greg Kroah-Hartman can apply it and make a new 3.4.10 release (by the time you submit maybe 3.4.11 maybe) you can send the patch to be applied to the driver in compat-wirelss by submitting it to be part of the linux-next-pending/ directory. In there are patches that are at least posted publicly. The format of the patch there is to be in a full patch. If you have doubts check out the compat-wireless-3.5.1-1-snpc.tar.bz2 release which has patches in all of these directories:
* pending-stable/
* linux-next-pending/
* linux-next-cherry-picks/
* crap/
At this point you may also want to consider upgrading to compat-wireless-3.5.1-1-snpc.tar.bz2. I should note that to send patches for the 3.4 stable release of compat-wireless you should use the linux-3.4.y branch. The same applies to the 3.5 release, you'd use the linux-3.5.y branch. Except for patches for files in the above directories I also require all patches merged into the stable branches to be in the master branch first -- this follows the kernel's on policy on stable releases.
The compat-wireless project is also now renamed to "compat-drivers" and we have a new mailing list and home page for the project. New releases based under the new name will start as of the v3.7 releases. For more details please see:
https://backports.wiki.kernel.org
Please have a read here with regards for documentation of the additional patches for compat-drivers.
https://backports.wiki.kernel.org/index.php/Documentation/compat-drivers/additional-patches
Luis
Hello Luis,
Thanks for the feedback. One simple question below.
Quoted 10 lines · On Mon, 20 Aug 2012 11:35:06 +0500 "Luis R. Rodriguez"…
Quoted 7 lines · Sergei Poselenov
On our system (ARM Cortex-M3 SOC running linux-2.6.33 with compat-wireless-3.4-rc3-1 modules configured for rt2x00) frequent crashes were observed in rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. In case of the bad length, mark the packet as with CRC error.
Quoted 6 lines
Nice find! However this is a *real* patch that must go upstream, so you should submit it to the rt2800usb maintainers and also mark the patch as a stable fix. You mark the patch as a stable fix by appending at the bottom of the commit log message: Cc: [email protected]. For example:
Before I did something stupid with my patch, here is what I'm going to do to make it reviewed in upsteam:
- Reapply and retest on compat-wireless-3.5.1-1-snpc.tar.bz2
- According to the http://linuxwireless.org/en/developers/maintainers
send the patch to
M: Ivo van Doorn <[email protected]>
M: Gertjan van Wingerde <[email protected]>
M: Helmut Schaa <[email protected]>
and CC to [email protected]
- Add the "Cc: [email protected]" before my "Signed-off-by" tag, as suggested in the example below.
Is that correct?
Thanks is advance.
After I will submit it to the mainline, I will try to provide the patch to the linux-next-pending.
Regards,
Sergei Poselenov, Emcraft Systems
Quoted 51 lines
commit
e19f15ac6437624b6214b2f0ec0d69fb7eb205faAuthor: Rajkumar Manoharan <[email protected]> Date: Thu Aug 9 12:37:26 2012 +0530ath9k: stop btcoex on device suspend
During suspend, the device will be moved to FULLSLEEP state. As btcoex is never been stopped, the btcoex timer is running and tries to access hw on fullsleep state. Fix that.
Signed-off-by Rajkumar Manoharan <[email protected]>Signed-off-by John W. Linville <[email protected]>Once you submit if you want it merged into a stable compat-wireless release even before Greg Kroah-Hartman can apply it and make a new 3.4.10 release (by the time you submit maybe 3.4.11 maybe) you can send the patch to be applied to the driver in compat-wirelss by submitting it to be part of the linux-next-pending/ directory. In there are patches that are at least posted publicly. The format of the patch there is to be in a full patch. If you have doubts check out the compat-wireless-3.5.1-1-snpc.tar.bz2 release which has patches in all of these directories:
* pending-stable/
* linux-next-pending/
* linux-next-cherry-picks/
* crap/At this point you may also want to consider upgrading to compat-wireless-3.5.1-1-snpc.tar.bz2. I should note that to send patches for the 3.4 stable release of compat-wireless you should use the linux-3.4.y branch. The same applies to the 3.5 release, you'd use the linux-3.5.y branch. Except for patches for files in the above directories I also require all patches merged into the stable branches to be in the master branch first -- this follows the kernel's on policy on stable releases.
The compat-wireless project is also now renamed to "compat-drivers" and we have a new mailing list and home page for the project. New releases based under the new name will start as of the v3.7 releases. For more details please see:
https://backports.wiki.kernel.org
Please have a read here with regards for documentation of the additional patches for compat-drivers.
https://backports.wiki.kernel.org/index.php/Documentation/compat-drivers/additional-patches
Luis
Quoted 6 lines · Sergei Poselenov
- Reapply and retest on compat-wireless-3.5.1-1-snpc.tar.bz2
- According to the http://linuxwireless.org/en/developers/maintainers
send the patch to
M: Ivo van Doorn <[email protected]>
M: Gertjan van Wingerde <[email protected]>
M: Helmut Schaa <[email protected]>
Preferably post it to [email protected] instead to Ivo, Gertjan and Helmut directly.
Thanks
Stanislaw