arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `moveml (%
PATCH 62/63 arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `moveml (%
Hi Al,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal.git master head: aad206fddcb7642e6777b1b992645299b7557ded commit: 28ba6e34ce54cb7ce2e509369a6f9c47c13083d9 [62/63] m68k: switch to generic sys_execve()/kernel_execve() config: m68k-m5475evb_defconfig (attached as .config)
All related error/warning messages:
arch/m68k/kernel/entry.S: Assembler messages:arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement moveml (%sp)+,%d0-%d2' ignored arch/m68k/kernel/entry.S:117: Error: operands mismatch -- statement moveml %d1-%d3,-(%sp)' ignored
---
0-DAY kernel build testing backend Open Source Technology Centre
Fengguang Wu <[email protected]> Intel Corporation
#
# Automatically generated file; DO NOT EDIT.
# Linux/m68k 3.6.0-rc3 Kernel Configuration
#CONFIG_M68K=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_GPIO=yCONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CSUM=yCONFIG_TIME_LOW_RES=yCONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not setCONFIG_ZONE_DMA=yCONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_SHOW=y
#
# RCU Subsystem
#CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=14
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not setCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_EMBEDDED=y
#
# Kernel Performance Events And Counters
#CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_HAVE_CLK=yCONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not setCONFIG_MMU=yCONFIG_MMU_COLDFIRE=y
#
# Platform setup
#
#
# Processor Type
#
# CONFIG_M68KCLASSIC is not setCONFIG_COLDFIRE=y
CONFIG_M54xx=y
CONFIG_M547x=y
# CONFIG_M548x is not set
#
# Processor Specific Options
#
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not setCONFIG_ARCH_DISCONTIGMEM_ENABLE=yCONFIG_NODES_SHIFT=3CONFIG_CPU_HAS_NO_BITFIELDS=yCONFIG_CPU_HAS_NO_MULDIV64=yCONFIG_FPU=yCONFIG_HAVE_CACHE_CB=yCONFIG_HAVE_MBAR=yCONFIG_CLOCK_SET=yCONFIG_CLOCK_FREQ=266000000CONFIG_CACHE_WRITETHRU=y
# CONFIG_CACHE_COPYBACK is not set
#
# Machine Types
#
# CONFIG_FIREBEE is not set
#
# Machine Options
#
# CONFIG_UBOOT is not set
# CONFIG_4KSTACKS is not set
#
# RAM configuration
#CONFIG_RAMBASE=0x0CONFIG_RAMSIZE=0x2000000CONFIG_VECTORBASE=0x0CONFIG_MBAR=0xff000000CONFIG_KERNELBASE=0x20000
#
# ROM configuration
#
# CONFIG_ROM is not setCONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
#
# Bus Support
#
# CONFIG_GENERIC_ISA_DMA is not set
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# Kernel Features
#CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_SELECT_MEMORY_MODEL=yCONFIG_DISCONTIGMEM_MANUAL=yCONFIG_DISCONTIGMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_CROSS_MEMORY_ATTACH=yCONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_GENERIC_CPU_DEVICES=y
# CONFIG_DMA_SHARED_BUFFER is not setCONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not setCONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not setCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not setCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #CONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Misc devices
#
# CONFIG_ATMEL_PWM is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline #
#
# Altera FPGA firmware download module
#CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_SINK is not setCONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_MCF=yCONFIG_SERIAL_MCF_BAUDRATE=19200CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options. #CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not setCONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
#
# Hardware Spinlock drivers
#
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
#
# Platform devices
#
# CONFIG_PROC_HARDWARE is not set
#
# Character devices
#
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is not set # CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set CONFIG_ROMFS_BACKED_BY_MTD=y
# CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_MTD=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NLS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not setCONFIG_DEFAULT_MESSAGE_LOGLEVEL=4CONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
# CONFIG_TEST_KSTRTOX is not setCONFIG_BOOTPARAM=yCONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not setCONFIG_HAS_IOMEM=yCONFIG_HAS_DMA=yCONFIG_GENERIC_ATOMIC64=yCONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
Re: [signal:master 62/63] arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `movem
Quoted 9 lines · Fengguang Wu
Hi Al,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal.git master head: aad206fddcb7642e6777b1b992645299b7557ded commit: 28ba6e34ce54cb7ce2e509369a6f9c47c13083d9 [62/63] m68k: switch to generic sys_execve()/kernel_execve() config: m68k-m5475evb_defconfig (attached as .config)
Quoted 5 lines
All related error/warning messages:
arch/m68k/kernel/entry.S: Assembler messages:arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statementmoveml (%sp)+,%d0-%d2' ignored arch/m68k/kernel/entry.S:117: Error: operands mismatch -- statementmoveml %d1-%d3,-(%sp)' ignored
On which toolchain? It had been a valid instruction on all m68k, starting with 68000. Is that as(1) insisting on %sp@+ form instead of (%sp)+? But we have both kinds used in arch/m68k, so if some toolchain version barfs on that, it's probably rather unhappy elsewhere...
Re: [signal:master 62/63] arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `movem
In reply to Fengguang WuQuoted 12 lines · Al Viro
Quoted 11 lines · Fengguang Wu
Hi Al,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal.git master head: aad206fddcb7642e6777b1b992645299b7557ded commit: 28ba6e34ce54cb7ce2e509369a6f9c47c13083d9 [62/63] m68k: switch to generic sys_execve()/kernel_execve() config: m68k-m5475evb_defconfig (attached as .config)All related error/warning messages:
Quoted 8 lines
Quoted 3 lines
arch/m68k/kernel/entry.S: Assembler messages:arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statementmoveml (%sp)+,%d0-%d2' ignored arch/m68k/kernel/entry.S:117: Error: operands mismatch -- statementmoveml %d1-%d3,-(%sp)' ignoredOn which toolchain? It had been a valid instruction on all m68k, starting with 68000. Is that as(1) insisting on %sp@+ form instead of (%sp)+? But we have both kinds used in
arch/m68k, so if some toolchain version barfs on that, it's probably rather unhappy elsewhere...
Err, I'm running binaries from:
Thanks,
Fengguang
Re: [signal:master 62/63] arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `movem
In reply to Fengguang WuQuoted 17 lines · Fengguang Wu
Quoted 16 lines · Al Viro
Quoted 14 lines · Fengguang Wu
Hi Al,
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal.git master head: aad206fddcb7642e6777b1b992645299b7557ded commit: 28ba6e34ce54cb7ce2e509369a6f9c47c13083d9 [62/63] m68k: switch to generic sys_execve()/kernel_execve() config: m68k-m5475evb_defconfig (attached as .config)All related error/warning messages:
arch/m68k/kernel/entry.S: Assembler messages:arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statementmoveml (%sp)+,%d0-%d2' ignored arch/m68k/kernel/entry.S:117: Error: operands mismatch -- statementmoveml %d1-%d3,-(%sp)' ignored
Quoted 8 lines
Quoted 4 lines
On which toolchain? It had been a valid instruction on all m68k, starting with 68000. Is that as(1) insisting on %sp@+ form instead of (%sp)+? But we have both kinds used in
arch/m68k, so if some toolchain version barfs on that, it's probably rather unhappy elsewhere...Err, I'm running binaries from:
Ho-hum...
; strings as |grep Binutils
(GNU Binutils) 2.22
;
So it's 2.22... 2.20 definitely accepts both variants of syntax. OK, I'll look into that.
Re: [signal:master 62/63] arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `movem
In reply to Fengguang WuQuoted 8 lines · Al Viro
Quoted 1 line
Ho-hum...
; strings as |grep Binutils
(GNU Binutils) 2.22
;So it's 2.22... 2.20 definitely accepts both variants of syntax.
So does debian build of binutils-2.22, for that matter...
Re: [signal:master 62/63] arch/m68k/kernel/entry.S:115: Error: operands mismatch -- statement `movem
In reply to Fengguang WuQuoted 4 lines · Fengguang Wu
Quoted 4 lines
On which toolchain? It had been a valid instruction on all m68k, starting with 68000. Is that as(1) insisting on %sp@+ form instead of (%sp)+? But we have both kinds used in
arch/m68k, so if some toolchain version barfs on that, it's probably rather unhappy elsewhere...
Hrrrm.... Looks like it's an effect of weird addressing modes being somewhat trimmed down on coldfire... So these lines should become something like
moveml 4(%sp), %d1-%d2
moveq #PT_SIZEOF,%d3
moveml %d1-%d3,(%sp) | we are not returning anyway...With that it still works on aranym and AFAICS those forms should be acceptable on anything, including all coldfire variants... As far as I can see, all places using increment/decrement forms of movem (essentially, bulk push/pop on arbitrary set of registers) are in the code that never gets touched on coldfire and non-MMU builds; the only potential exception is non-assembler variant of SAVE_ALL_INT (#define SAVE_ALL_INT .... in asm/entry.h), but that macro is never actually used anywhere in C code.
OK, folded and pushed. Should be on git.kernel.org shortly...