Prevent devices with RMRRs from being placed into SI Domain
PATCH v3 1/1 Prevent devices with RMRRs from being placed into SI Domain
This patch is to prevent devices that have RMRRs associated with them to not be placed into the SI Domain during init. We don't put USB devices into this category, however. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost.
----
PATCH v1: https://lkml.org/lkml/2012/6/15/204
PATCH v2: https://lkml.org/lkml/2012/9/18/354
drivers/iommu/intel-iommu.c | 30 ++++++++++++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
drivers/iommu/intel-iommu.c renamed from drivers/iommu/intel-iommu.c.ORIG +30 -0
@@ -2320,8 +2320,38 @@ static int domain_add_dev_info(struct dmreturn 0 ; } +static bool device_has_rmrr (struct pci_dev *dev) +{ +struct dmar_rmrr_unit *rmrr; +int i; + +for_each_rmrr_units (rmrr) { +for (i =0 ; i < rmrr->devices_cnt; i++) { +/* +* Here we are just concerned with checking each device +* that has an RMRR associated with it and not allow it +* to be placed into the SI Domain during startup. +*/ +if (rmrr->devices[i] == dev) +return true; + } + } +return false; +} +static int iommu_should_identity_map (struct pci_dev *pdev,int startup) { + +/* +* This is where we will refuse any device that has an +* RMRR associated with it and is not a USB device and +* NOT allow it to be placed into the SI Domain. We don't +* need a separate bit for this because it could be ANY device. +*/ +if (device_has_rmrr (pdev) && + (pdev->class >>8 ) !=PCI_CLASS_SERIAL_USB ) +return 0 ; +if ((iommu_identity_mapping &IDENTMAP_AZALIA ) &&IS_AZALIA (pdev))return 1 ;
I meant to edit the preamble with no reference to init. This patch will prevent any device with an RMRR association from getting placed into the SI Domain and any time.
Tom
-----Original Message-----
From: Mingarelli, Thomas
Sent: Wednesday, October 17, 2012 4:17 PM
To: Alex Williamson; David Woodhouse; Don Dutile
Cc: Khan, Shuah; Mingarelli, Thomas; Knippers, Linda; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; [email protected]
Subject: [PATCH v3] Prevent devices with RMRRs from being placed into SI Domain
This patch is to prevent devices that have RMRRs associated with them to not be placed into the SI Domain during init. We don't put USB devices into this category, however. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost.
----
PATCH v1: https://lkml.org/lkml/2012/6/15/204
PATCH v2: https://lkml.org/lkml/2012/9/18/354
drivers/iommu/intel-iommu.c | 30 ++++++++++++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
drivers/iommu/intel-iommu.c renamed from drivers/iommu/intel-iommu.c.ORIG +30 -0
@@ -2320,8 +2320,38 @@ static int domain_add_dev_info(struct dmreturn 0 ; } +static bool device_has_rmrr (struct pci_dev *dev) +{ +struct dmar_rmrr_unit *rmrr; +int i; + +for_each_rmrr_units (rmrr) { +for (i =0 ; i < rmrr->devices_cnt; i++) { +/* +* Here we are just concerned with checking each device +* that has an RMRR associated with it and not allow it +* to be placed into the SI Domain during startup. +*/ +if (rmrr->devices[i] == dev) +return true; + } + } +return false; +} +static int iommu_should_identity_map (struct pci_dev *pdev,int startup) { + +/* +* This is where we will refuse any device that has an +* RMRR associated with it and is not a USB device and +* NOT allow it to be placed into the SI Domain. We don't +* need a separate bit for this because it could be ANY device. +*/ +if (device_has_rmrr (pdev) && + (pdev->class >>8 ) !=PCI_CLASS_SERIAL_USB ) +return 0 ; +if ((iommu_identity_mapping &IDENTMAP_AZALIA ) &&IS_AZALIA (pdev))return 1 ;
Quoted 57 lines · Tom Mingarelli
This patch is to prevent devices that have RMRRs associated with them to not be placed into the SI Domain during init. We don't put USB devices into this category, however. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost.
Signed-off-by Thomas Mingarelli <[email protected]>Tested-by Shuah Khan <[email protected]>----
PATCH v1: https://lkml.org/lkml/2012/6/15/204
PATCH v2: https://lkml.org/lkml/2012/9/18/354
drivers/iommu/intel-iommu.c| 30 ++++++++++++++++++++++++++++++1 files changed, 30 insertions(+), 0 deletions(-)diff -up
./drivers/iommu/intel-iommu.c.ORIG./drivers/iommu/intel-iommu.cdrivers/iommu/intel-iommu.c renamed from drivers/iommu/intel-iommu.c.ORIG +30
-0@@ -2320,8 +2320,38 @@ static int domain_add_dev_info(struct dmreturn 0 ; } +static bool device_has_rmrr (struct pci_dev *dev) +{ +struct dmar_rmrr_unit *rmrr; +int i; + +for_each_rmrr_units (rmrr) { +for (i =0 ; i < rmrr->devices_cnt; i++) { +/* +* Here we are just concerned with checking each device +* that has an RMRR associated with it and not allow it +* to be placed into the SI Domain during startup. +*/ +if (rmrr->devices[i] == dev) +return true; + } + } +return false; +} +static int iommu_should_identity_map (struct pci_dev *pdev,int startup) { + +/* +* This is where we will refuse any device that has an +* RMRR associated with it and is not a USB device and +* NOT allow it to be placed into the SI Domain. We don't +* need a separate bit for this because it could be ANY device. +*/ +if (device_has_rmrr (pdev) && + (pdev->class >>8 ) !=PCI_CLASS_SERIAL_USB ) +return 0 ; +if ((iommu_identity_mapping &IDENTMAP_AZALIA ) &&IS_AZALIA (pdev))return 1 ;
Quoted 6 lines
_______________________________________________
iommu mailing list iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
.
I applied this patch to my system and booted with IOMMU pass through mode enabled. Without the patch my system would panic or wedge. I also applied a be2net patch I'm working on and was able to get successful netperf runs with IOMMU pass through mode enabled.
-Craig