new pkg tor
PATCH 1/1 new pkg tor
I hope this little patch is useful for someone.
package/Config.in 2012-10-23 15:53:16.000000000 +0200 renamed from package/Config.in 2012-10-23 19:14:27.000000000 +0200 +1 -0
@@ -635,6 +636,7 @@ source "package/tinyhttpd/Config.in" endif source "package/tn5250/Config.in" +source "package/tor/Config.in" source "package/transmission/Config.in" source "package/ttcp/Config.in" source "package/udpcast/Config.in"
diff -Nura buildroot.orig/package/tor/Config.in
buildroot/package/tor/Config.in
--- buildroot.orig/package/tor/Config.in 1970-01-01 01:00:00.000000000
+0100
+++ buildroot/package/tor/Config.in 2012-10-23 15:26:31.000000000 +0200
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_TOR
+ bool "tor" + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_ZLIB + select BR2_PACKAGE_LIBEVENT + help + Tor is free software and an open network that helps you defend + against a form of network surveillance that threatens personal + freedom and privacy, confidential business activities and + relationships, and state security known as traffic analysis.
+
+ https://www.torproject.org/
+
+config BR2_PACKAGE_TOR_DISABLE_TPROXY
+ bool "disable transparent proxy" + depends on BR2_PACKAGE_TOR + help
+ This option disables the function, to run the tor daemon
+ as transparent proxy.
package/tor/S60tor 2012-10-23 19:53:53.000000000 +0200 renamed from package/tor/S60tor 1970-01-01 01:00:00.000000000 +0100 +47 -0
47 lines not on this page · raw message
package/tor/tor.mk 2012-10-23 17:14:10.000000000 +0200 renamed from package/tor/tor.mk 1970-01-01 01:00:00.000000000 +0100 +26 -0
@@ -0,0 +1,48 @@ +############################################################# +# +# tor-0.2.2.39 +# +############################################################# + +TOR_VERSION = 0.2.2.39 +TOR_SITE = https://www.torproject.org/dist +TOR_DEPENDENCIES = zlib libevent openssl +TOR_CONF_OPT = + +ifeq ($(BR2_PACKAGE_TOR_DISABLE_TPROXY),y) +TOR_CONF_OPT += --disable-transparent +endif + +ifeq ($(BR2_PTHREADS_NONE),y) +TOR_CONF_OPT += --disable-threads +endif + +ifneq ($(BR2_LARGEFILE),y) +TOR_CONF_OPT += --disable-largefile +endif + +define TOR_INSTALL_INITSCRIPT +if [ ! -f $(TARGET_DIR)/etc/init.d/S60tor ]; then \ + $(INSTALL) -D -m 755 package/tor/S60tor
$(TARGET_DIR)/etc/init.d/S60tor; \
+fi
+endef
+
+define TOR_INSTALL_CONF
+if [ ! -f $(TARGET_DIR)/etc/torrc ]; then \
+ $(INSTALL) -D -m 644 package/tor/torrc $(TARGET_DIR)/etc/torrc; \
+fi
+endef
+
+define TOR_INSTALL_TARGET_CMDS
+ $(INSTALL) -D -m 755 $(TOR_DIR)/src/or/tor $(TARGET_DIR)/usr/sbin/tor + $(TOR_INSTALL_INITSCRIPT) + $(TOR_INSTALL_CONF) +endef + +define TOR_UNINSTALL_TARGET_CMDS + rm -f $(TARGET_DIR)/usr/sbin/tor + rm -f $(TARGET_DIR)/etc/torrc + rm -f $(TARGET_DIR)/etc/init.d/S60tor
+endef
+
+$(eval $(autotools-package))
package/tor/torrc 2012-10-23 17:27:24.000000000 +0200 renamed from package/tor/torrc 1970-01-01 01:00:00.000000000 +0100 +35 -0
@@ -0,0 +1,170 @@ +## Configuration file for a typical Tor user +## Last updated 16 July 2009 for Tor 0.2.2.1-alpha. +## (May or may not work for much older or much newer versions of Tor.) +## +## Lines that begin with "## " try to explain what's going on. Lines +## that begin with just "#" are disabled commands: you can enable them +## by removing the "#" symbol. +## +## See 'man tor', or https://www.torproject.org/tor-manual.html, +## for more options you can use in this file. +## +## Tor will look for this file in various places based on your platform: +## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc + + +## Replace this with "SocksPort 0" if you plan to run Tor only as a +## relay, and not make any local application connections yourself. +SocksPort 9050 # what port to open for local application connections +SocksListenAddress 127.0.0.1 # accept connections only from localhost +#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also + +## Entry policies to allow/deny SOCKS requests based on IP address. +## First entry that matches wins. If no SocksPolicy is set, we accept +## all (and only) requests from SocksListenAddress. +#SocksPolicy accept 192.168.0.0/16 +#SocksPolicy reject * + +## Logs go to stdout at level "notice" unless redirected by something +## else, like one of the below lines. You can have as many Log lines as +## you want. +## +## We advise using "notice" in most cases, since anything more verbose +## may provide sensitive information to an attacker who obtains the logs. +## +## Send all messages of level 'notice' or higher
to /usr/local/var/log/tor/notices.log
+#Log notice file /usr/local/var/log/tor/notices.log
+## Send every possible message to /usr/local/var/log/tor/debug.log +#Log debug file /usr/local/var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+#Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use +## --runasdaemon 1 on the command line. This is ignored on Windows; +## see the FAQ entry if you want Tor to run as an NT service. +RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store +## things in $HOME/.tor on Unix, and in Application Data\tor on Windows. +#DataDirectory /usr/local/var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor +## controller applications, as documented in control-spec.txt. +#ControlPort 9051
+## If you enable the controlport, be sure to enable one of these +## authentication methods, to prevent attackers from accessing it. +#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C +#CookieAuthentication 1
+
+############### This section is just for location-hidden services ### +
+## Once you have configured a hidden service, you can look at the +## contents of the file ".../hidden_service/hostname" for the address +## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the +## address y:z.
+
+#HiddenServiceDir /usr/local/var/lib/tor/hidden_service/ +#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /usr/local/var/lib/tor/other_hidden_service/ +#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays ##################### +#
+## See https://www.torproject.org/docs/tor-doc-relay for details. +
+## Required: what port to advertise for incoming Tor connections. +#ORPort 9001
+## If you want to listen on a port other than the one advertised +## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the +## line below too. You'll need to do ipchains or other port forwarding +## yourself to make this work.
+#ORListenAddress 0.0.0.0:9090
+
+## A handle for your relay, so people don't have to refer to it by key. +#Nickname ididnteditheconfig
+
+## The IP address or full DNS name for your relay. Leave commented out +## and Tor will guess.
+#Address noname.example.com
+
+## Define these to limit how much relayed traffic you will allow. Your +## own traffic is still unthrottled. Note that RelayBandwidthRate must +## be at least 20 KB.
+#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps) +#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps) +
+## Use these to restrict the maximum traffic per day, week, or month. +## Note that this threshold applies to sent _and_ to received bytes, +## not to their sum: Setting "4 GB" may allow up to 8 GB
+## total before hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period. +#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day) +#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax +## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you +## if your relay is misconfigured or something else goes wrong. Google +## indexes this, so spammers might also collect it. +#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com> +
+## Uncomment this to mirror directory information for others. Please do +## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections +## If you want to listen on a port other than the one advertised +## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line +## below too. You'll need to do ipchains or other port forwarding yourself +## to make this work.
+#DirListenAddress 0.0.0.0:9091
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you +## can explain what Tor is if anybody wonders why your IP address is +## contacting them. See contrib/tor-exit-notice.html in Tor's source +## distribution for a sample.
+#DirPortFrontPage /usr/local/etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity +## key fingerprint of each Tor relay you control, even if they're on +## different networks. You declare it here so Tor clients can avoid +## using more than one of your relays in a single circuit. See +## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers
+#MyFamily $keyid,$keyid,...
+
+## A comma-separated list of exit policies. They're considered first +## to last, and the first match wins. If you want to _replace_ +## the default exit policy, end this with either a reject *:* or an +## accept *:*. Otherwise, you're _augmenting_ (prepending to) the +## default exit policy. Leave commented to just use the default, which is +## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall, +## you should update your exit policy to reflect this -- otherwise Tor +## users will be told that those destinations are down.
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more +#ExitPolicy accept *:119 # accept nntp as well as default exit policy +#ExitPolicy reject *:* # no exits allowed
+#
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the +## main directory. Since there is no complete public list of them, even if an +## ISP is filtering connections to all the known Tor relays, they probably +## won't be able to block all the bridges. Also, websites won't treat you +## differently because they won't know you're running Tor. If you can +## be a real relay, please do; but if not, be a bridge! +#BridgeRelay 1
+#ExitPolicy reject *:*
+
Signature · 3 lines
powered by Linux 2.6.32-5-amd64 && KDE: 3.5.13.1 *support ur local antifa*