Skip to contentSkip to conversation

mpt3sas: Makefile, Kconfig and scsi_transport_sas file changes to support new driver mpt3sas

PATCH New [email protected] 1 participant 1 message Nov 29, 2012

Subsystems (2)
SCSI LSI Logic MPT fusion drivers (FC/SAS/SPI)
lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH v2 1/20 mpt3sas: Makefile, Kconfig and scsi_transport_sas file changes to support new driver mpt3sas

This patch contains the Makefile, Kconfig and scsi_transport_sas file changes to support new driver mpt3sas

Signed-off-by Sreekanth Reddy <[email protected]>
Reviewed-by Nagalakshmi Nandigama <[email protected]>

---

drivers/scsi/Kconfig +1 -0
index e955978..49244f8 100644
@@ -620,6 +620,7 @@ config SCSI_ARCMSR
 
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"
+source "drivers/scsi/mpt3sas/Kconfig"
 source "drivers/scsi/ufs/Kconfig"
 
 config SCSI_HPTIOP
drivers/scsi/Makefile +1 -0
index 1a3368b..88e52bb 100644
@@ -106,6 +106,7 @@ obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/
+obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
 obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o
drivers/scsi/mpt3sas/Kconfig new file +67 -0

67 lines not on this page · raw message

drivers/scsi/mpt3sas/Makefile new file +8 -0
new file mode 100644
index 0000000..4c1d2e7
@@ -0,0 +1,8 @@
+# mpt3sas makefile
+obj-m += mpt3sas.o
+mpt3sas-y +=  mpt3sas_base.o     \
+		mpt3sas_config.o \
+		mpt3sas_scsih.o      \
+		mpt3sas_transport.o     \
+		mpt3sas_ctl.o	\
+		mpt3sas_trigger_diag.o
drivers/scsi/scsi_transport_sas.c +1 -0
index f7565fc..1b68142 100644
@@ -151,6 +151,7 @@ static struct {
 	{ SAS_LINK_RATE_1_5_GBPS,	"1.5 Gbit" },
 	{ SAS_LINK_RATE_3_0_GBPS,	"3.0 Gbit" },
 	{ SAS_LINK_RATE_6_0_GBPS,	"6.0 Gbit" },
+	{ SAS_LINK_RATE_12_0_GBPS,	"12.0 Gbit" },
 };
 sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
 sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
include/scsi/scsi_transport_sas.h +1 -0
index 98b3a20..9b8e088 100644
@@ -36,6 +36,7 @@ enum sas_linkrate {
 	SAS_LINK_RATE_3_0_GBPS = 9,
 	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
 	SAS_LINK_RATE_6_0_GBPS = 10,
+	SAS_LINK_RATE_12_0_GBPS = 11,
 	/* These are virtual to the transport class and may never
 	 * be signalled normally since the standard defined field
 	 * is only 4 bits */