mpt3sas: Ioctl Module Support for MPT based controllers

new file mode 100644
index 0000000..bd89f4f
@@ -0,0 +1,418 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:[email protected])
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_CTL_H_INCLUDED
+#define MPT3SAS_CTL_H_INCLUDED
+
+#ifdef __KERNEL__
+#include <linux/miscdevice.h>
+#endif
+
+
+#ifndef MPT3SAS_MINOR
+#define MPT3SAS_MINOR		(MPT_MINOR + 2)
+#endif
+#define MPT3SAS_DEV_NAME	"mpt3ctl"
+#define MPT3_MAGIC_NUMBER	'L'
+#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
+
+/**
+ * IOCTL opcodes
+ */
+#define MPT3IOCINFO	_IOWR(MPT3_MAGIC_NUMBER, 17, \
+	struct mpt3_ioctl_iocinfo)
+#define MPT3COMMAND	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command)
+#ifdef CONFIG_COMPAT
+#define MPT3COMMAND32	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command32)
+#endif
+#define MPT3EVENTQUERY	_IOWR(MPT3_MAGIC_NUMBER, 21, \
+	struct mpt3_ioctl_eventquery)
+#define MPT3EVENTENABLE	_IOWR(MPT3_MAGIC_NUMBER, 22, \
+	struct mpt3_ioctl_eventenable)
+#define MPT3EVENTREPORT	_IOWR(MPT3_MAGIC_NUMBER, 23, \
+	struct mpt3_ioctl_eventreport)
+#define MPT3HARDRESET	_IOWR(MPT3_MAGIC_NUMBER, 24, \
+	struct mpt3_ioctl_diag_reset)
+#define MPT3BTDHMAPPING	_IOWR(MPT3_MAGIC_NUMBER, 31, \
+	struct mpt3_ioctl_btdh_mapping)
+
+/* diag buffer support */
+#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \
+	struct mpt3_diag_register)
+#define MPT3DIAGRELEASE	_IOWR(MPT3_MAGIC_NUMBER, 27, \
+	struct mpt3_diag_release)
+#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \
+	struct mpt3_diag_unregister)
+#define MPT3DIAGQUERY	_IOWR(MPT3_MAGIC_NUMBER, 29, \
+	struct mpt3_diag_query)
+#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \
+	struct mpt3_diag_read_buffer)
+
+/**
+ * struct mpt3_ioctl_header - main header structure
+ * @ioc_number -  IOC unit number
+ * @port_number - IOC port number
+ * @max_data_size - maximum number bytes to transfer on read
+ */
+struct mpt3_ioctl_header {
+	uint32_t ioc_number;
+	uint32_t port_number;
+	uint32_t max_data_size;
+};
+
+/**
+ * struct mpt3_ioctl_diag_reset - diagnostic reset
+ * @hdr - generic header
+ */
+struct mpt3_ioctl_diag_reset {
+	struct mpt3_ioctl_header hdr;
+};
+
+
+/**
+ * struct mpt3_ioctl_pci_info - pci device info
+ * @device - pci device id
+ * @function - pci function id
+ * @bus - pci bus id
+ * @segment_id - pci segment id
+ */
+struct mpt3_ioctl_pci_info {
+	union {
+		struct {
+			uint32_t device:5;
+			uint32_t function:3;
+			uint32_t bus:24;
+		} bits;
+		uint32_t  word;
+	} u;
+	uint32_t segment_id;
+};
+
+
+#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
+#define MPT2_IOCTL_INTERFACE_FC		(0x01)
+#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
+#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
+#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
+#define MPT2_IOCTL_VERSION_LENGTH	(32)
+
+/**
+ * struct mpt3_ioctl_iocinfo - generic controller info
+ * @hdr - generic header
+ * @adapter_type - type of adapter (spi, fc, sas)
+ * @port_number - port number
+ * @pci_id - PCI Id
+ * @hw_rev - hardware revision
+ * @sub_system_device - PCI subsystem Device ID
+ * @sub_system_vendor - PCI subsystem Vendor ID
+ * @rsvd0 - reserved
+ * @firmware_version - firmware version
+ * @bios_version - BIOS version
+ * @driver_version - driver version - 32 ASCII characters
+ * @rsvd1 - reserved
+ * @scsi_id - scsi id of adapter 0
+ * @rsvd2 - reserved
+ * @pci_information - pci info (2nd revision)
+ */
+struct mpt3_ioctl_iocinfo {
+	struct mpt3_ioctl_header hdr;
+	uint32_t adapter_type;
+	uint32_t port_number;
+	uint32_t pci_id;
+	uint32_t hw_rev;
+	uint32_t subsystem_device;
+	uint32_t subsystem_vendor;
+	uint32_t rsvd0;
+	uint32_t firmware_version;
+	uint32_t bios_version;
+	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
+	uint8_t rsvd1;
+	uint8_t scsi_id;
+	uint16_t rsvd2;
+	struct mpt3_ioctl_pci_info pci_information;
+};
+
+
+/* number of event log entries */
+#define MPT3SAS_CTL_EVENT_LOG_SIZE (50)
+
+/**
+ * struct mpt3_ioctl_eventquery - query event count and type
+ * @hdr - generic header
+ * @event_entries - number of events returned by get_event_report
+ * @rsvd - reserved
+ * @event_types - type of events currently being captured
+ */
+struct mpt3_ioctl_eventquery {
+	struct mpt3_ioctl_header hdr;
+	uint16_t event_entries;
+	uint16_t rsvd;
+	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+/**
+ * struct mpt3_ioctl_eventenable - enable/disable event capturing
+ * @hdr - generic header
+ * @event_types - toggle off/on type of events to be captured
+ */
+struct mpt3_ioctl_eventenable {
+	struct mpt3_ioctl_header hdr;
+	uint32_t event_types[4];
+};
+
+#define MPT3_EVENT_DATA_SIZE (192)
+/**
+ * struct MPT3_IOCTL_EVENTS -
+ * @event - the event that was reported
+ * @context - unique value for each event assigned by driver
+ * @data - event data returned in fw reply message
+ */
+struct MPT3_IOCTL_EVENTS {
+	uint32_t event;
+	uint32_t context;
+	uint8_t data[MPT3_EVENT_DATA_SIZE];
+};
+
+/**
+ * struct mpt3_ioctl_eventreport - returing event log
+ * @hdr - generic header
+ * @event_data - (see struct MPT3_IOCTL_EVENTS)
+ */
+struct mpt3_ioctl_eventreport {
+	struct mpt3_ioctl_header hdr;
+	struct MPT3_IOCTL_EVENTS event_data[1];
+};
+
+/**
+ * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl
+ * @hdr - generic header
+ * @timeout - command timeout in seconds. (if zero then use driver default
+ *  value).
+ * @reply_frame_buf_ptr - reply location
+ * @data_in_buf_ptr - destination for read
+ * @data_out_buf_ptr - data source for write
+ * @sense_data_ptr - sense data location
+ * @max_reply_bytes - maximum number of reply bytes to be sent to app.
+ * @data_in_size - number bytes for data transfer in (read)
+ * @data_out_size - number bytes for data transfer out (write)
+ * @max_sense_bytes - maximum number of bytes for auto sense buffers
+ * @data_sge_offset - offset in words from the start of the request message to
+ * the first SGL
+ * @mf[1];
+ */
+struct mpt3_ioctl_command {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	void __user *reply_frame_buf_ptr;
+	void __user *data_in_buf_ptr;
+	void __user *data_out_buf_ptr;
+	void __user *sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+
+#ifdef CONFIG_COMPAT
+struct mpt3_ioctl_command32 {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	uint32_t reply_frame_buf_ptr;
+	uint32_t data_in_buf_ptr;
+	uint32_t data_out_buf_ptr;
+	uint32_t sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+#endif
+
+/**
+ * struct mpt3_ioctl_btdh_mapping - mapping info
+ * @hdr - generic header
+ * @id - target device identification number
+ * @bus - SCSI bus number that the target device exists on
+ * @handle - device handle for the target device
+ * @rsvd - reserved
+ *
+ * To obtain a bus/id the application sets
+ * handle to valid handle, and bus/id to 0xFFFF.
+ *
+ * To obtain the device handle the application sets
+ * bus/id valid value, and the handle to 0xFFFF.
+ */
+struct mpt3_ioctl_btdh_mapping {
+	struct mpt3_ioctl_header hdr;
+	uint32_t id;
+	uint32_t bus;
+	uint16_t handle;
+	uint16_t rsvd;
+};
+
+
+
+/* application flags for mpt3_diag_register, mpt3_diag_query */
+#define MPT3_APP_FLAGS_APP_OWNED	(0x0001)
+#define MPT3_APP_FLAGS_BUFFER_VALID	(0x0002)
+#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
+
+/* flags for mpt3_diag_read_buffer */
+#define MPT3_FLAGS_REREGISTER		(0x0001)
+
+#define MPT3_PRODUCT_SPECIFIC_DWORDS		23
+
+/**
+ * struct mpt3_diag_register - application register with driver
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @requested_buffer_size - buffers size in bytes
+ * @unique_id - tag specified by application that is used to signal ownership
+ *  of the buffer.
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+struct mpt3_diag_register {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t requested_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_unregister - application unregister with driver
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be unregistered
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+struct mpt3_diag_unregister {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_query - query relevant info associated with diag buffers
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @total_buffer_size - diag buffer size in bytes
+ * @driver_added_buffer_size - size of extra space appended to end of buffer
+ * @unique_id - unique id associated with this buffer.
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+struct mpt3_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t total_buffer_size;
+	uint32_t driver_added_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_release -  request to send Diag Release Message to firmware
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be released
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+struct mpt3_diag_release {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_read_buffer - request for copy of the diag buffer
+ * @hdr - generic header
+ * @status -
+ * @reserved -
+ * @flags - misc flags
+ * @starting_offset - starting offset within drivers buffer where to start
+ *  reading data at into the specified application buffer
+ * @bytes_to_read - number of bytes to copy from the drivers buffer into the
+ *  application buffer starting at starting_offset.
+ * @unique_id - unique id associated with this buffer.
+ * @diagnostic_data - data payload
+ */
+struct mpt3_diag_read_buffer {
+	struct mpt3_ioctl_header hdr;
+	uint8_t status;
+	uint8_t reserved;
+	uint16_t flags;
+	uint32_t starting_offset;
+	uint32_t bytes_to_read;
+	uint32_t unique_id;
+	uint32_t diagnostic_data[1];
+};
+
+#endif /* MPT3SAS_CTL_H_INCLUDED */