Pull request: u-boot-arm/master
Hello Tom,
The following changes since commit095728803eedfce850a2f85828f79500cb09979e:
Merge branch 'master' of git://git.denx.de/u-boot-net (2012-12-17 18:39:50 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 96764df1b47ddebfb50fadf5af72530b07b5fc89:
Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
This pull request is specifically to get past the big merge issues from u-boot-arm to u-boot which involved samsung, ixm and tegra fixes, thanks to all those who took part in helping untie the knot. Once this is in, I'll certainly have another pull request, early in the coming week.
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge samsung, imx, tegra into u-boot-arm/master
Allen Martin (2):
tegra: add CONSOLE_MUX support to tegra-kbc Merge remote-tracking branch 'u-boot/master' into
u-boot-arm-merged
Ashok Kumar Reddy (1):
ARM: arm1176: Define arch_cpu_init() for s3c64xx
Beno?t Th?baudeau (17):
arm1136: Fix enable_caches()
mx31: Move EHCI definitions to ehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: Fix OC_DIS usage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missing OC_DIS for i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Make board_ehci_hcd_init() optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Mark lowlevel_init board-specific code
Chander Kashyap (1):
Exynos5250: Enable PXE Support
Fabio Estevam (28):
mx25pdk: Include CONFIG_MX25
mx25pdk: Add esdhc support
pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
mx25: Place common functions into sys_proto.h
pmic: Add support for mc34704
mx25pdk: Add Ethernet support
mx53loco: Allow booting a zImage kernel
mx25pdk: Allow booting a zImage kernel
mx51evk: Allow booting a zImage kernel
mx35pdk: Allow booting a zImage kernel
mx6qsabre_common: Allow booting a zImage kernel
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi: mxc_spi: Fix handling of chip select
spi: mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: Configure CONFIG_BOOTDELAY to one second
mx53loco: Configure CONFIG_BOOTDELAY to one second
mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
mx51evk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Configure CONFIG_BOOTDELAY to one second
mx31pdk: Configure CONFIG_BOOTDELAY to one second
mx35pdk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Adapt it for the new PMIC framework
woodburn: Set gpio value in gpio_direction_output()
mx53loco: Fix PMIC name
mx25pdk: Allow booting a device tree kernel
Hatim RV (3):
EXYNOS: Add clock for SPI
EXYNOS5: Add base address for SPI
EXYNOS5: Enable SPI
Marek Vasut (9):
dm: wdt: Move s5p watchdog timer to drivers/watchdog/
mx28: Fix typo in POWER_MINPWR_VBG_OFF
mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
mx28: Rename regs-power.h to regs-power-mx28.h
mxs: Silence elftosb
mxs: Implement common function to setup VDDx
mxs: Properly setup VDDD in power supply setup code
mxs: Staticize SPL functions
Mayuresh Kulkarni (1):
tegra: Enable display/lcd support on Seaboard
Minkyu Kang (6):
ARCH: EXYNOS: add support to match product id
EXYNOS: Clock: Add common function for pll rate calculation
s3c64xx: fix the compiler error and warning
Merge branch 'master' of git://git.denx.de/u-boot into resolve
universal_c210: fix compiler error and compiler warning
universal_c210: check the NULL pointer when get the PMIC
Otavio Salvador (1):
mxs: SPL: Generalize memory initialization
Piotr Wilczek (12):
arm:exynos4:trats: Correct SDRAM configuration for trats arm:exynos4:trats: Fix SDRAM size arm:exynos4:pinmux: Modify the gpio function for mmc arm:exynos4:trats: Use pinmux for mmc configuration arm:exynos4:universal: Use pinmux for mmc configuration arm:exynos4:universal: Eliminated low level init
arm: trats: Power down core 1
exynos4: universal_C210: use software SPI misc:max8998 Add LDO macros
drivers: video: Add ld9040 video driver
drivers: video: fix image position
exynos4: universal_C210: add display support
Rajeshwari Shinde (16):
PMIC: MAX77686: Add support for MAX77686
SMDK5250: Config: Enable MAX77686 pmic chip
SOUND: SAMSUNG: Add I2S driver
SOUND: Add WM8994 codec
Sound: Add command for audio playback
EXYNOS: Add I2S registers
EXYNOS: Add parameters required by I2S
EXYNOS: Add pinmux for I2S
EXYNOS: Add I2S base address
EXYNOS: Add clock for I2S
SMDK5250: Enable Sound
EXYNOS5: Add pinmux support for SPI
SPI: Add SPI Driver for EXYNOS.
EXYNOS5: Enable SPI booting.
POWER: MAX77686: Modified as per the latest Implementation
SMDK5250: Enable pmic MAX77686
Simon Glass (17):
pxa: Disable dcache on palmld, palmtc, zipitz2
tegra: Use const for pinmux_config_pingroup/table()
tegra: Add display support to funcmux
tegra: fdt: Add pwm binding and node
tegra: fdt: Add LCD definitions for Tegra
tegra: Add support for PWM
tegra: Add LCD driver
tegra: Add LCD support to Nvidia boards
arm: Add control over cachability of memory regions
lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
lcd: Add support for flushing LCD fb from dcache after update
tegra: Align LCD frame buffer to section boundary
tegra: Support control of cache settings for LCD
tegra: fdt: Add LCD definitions for Seaboard
lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
tegra: config: seaboard: Move tegra-common-post to correct place
Stefano Babic (9):
ARM: Fix start.S when used with SPL in arm1136
MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
MX35: Add soc_boot_mode and soc_boot_device to MX35
SPL: Added SPL target for mx35 SOC to SPL Makefile
ARM: Add SPL target to arm1136
MX35: add support for woodburn board
MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk Merge git://git.denx.de/u-boot
Merge branch 'master' of git://git.denx.de/u-boot into master
Stephen Warren (4):
ARM: tegra: TrimSlice: add support for USB1 port
mmc: tegra: support 4-bit operation too on 8-bit slots
ARM: tegra: enable 8-bit SD slots in board files
tegra: use generic fs commands in BOOTCOMMAND
Troy Kisky (4):
mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
imx-common: cpu: add imx_ddr_size
arch-mx6: add mx6dl_pins.h
Wei Ni (1):
tegra: Add SOC support for display/lcd
?ukasz Majewski (1):
gpio:fix: Proper handling of GPIO subsystem parts at Samsung
devices
MAINTAINERS |
1 + Makefile
| 4 +-
README |
16 ++-
arch/arm/cpu/arm1136/config.mk |
3 + arch/arm/cpu/arm1136/cpu.c
| 22 ++--
arch/arm/cpu/arm1136/mx35/Makefile |
1 + arch/arm/cpu/arm1136/mx35/generic.c
| 75 +++++++++++
arch/arm/cpu/arm1136/mx35/mx35_sdram.c |
137 ++++++++++++++++++++
arch/arm/cpu/arm1136/start.S |
31 +++--
arch/arm/cpu/arm1136/u-boot-spl.lds |
62 +++++++++
arch/arm/cpu/arm1176/s3c64xx/Makefile |
2 +- arch/arm/cpu/arm1176/s3c64xx/init.c
| 26 ++++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c |
4 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 38 +++---
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c |
305 ++++++++++++++++----------------------------
arch/arm/cpu/armv7/cache_v7.c |
11 ++
arch/arm/cpu/armv7/exynos/clock.c |
350 +++++++++++++++++++++++++++++++++++++++++----------
arch/arm/cpu/armv7/exynos/pinmux.c |
64 ++++++++++
arch/arm/cpu/armv7/mx5/clock.c |
4 +- arch/arm/cpu/armv7/mx5/lowlevel_init.S
| 2 +-
arch/arm/cpu/armv7/mx6/clock.c |
2 + arch/arm/cpu/armv7/mx6/soc.c
| 32 +++--
arch/arm/cpu/armv7/s5p-common/Makefile |
1 - arch/arm/cpu/armv7/tegra20/Makefile
| 2 +
arch/arm/cpu/armv7/tegra20/display.c |
409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/tegra20/pwm.c |
101 +++++++++++++++
arch/arm/cpu/tegra20-common/funcmux.c |
37 ++++++
arch/arm/cpu/tegra20-common/pinmux.c |
4 +- arch/arm/dts/tegra20.dtsi
| 105 ++++++++++++++++
arch/arm/imx-common/cpu.c |
66 ++++++++--
arch/arm/include/asm/arch-exynos/clk.h |
4 + arch/arm/include/asm/arch-exynos/clock.h
| 29 +++++
arch/arm/include/asm/arch-exynos/cpu.h |
18 +++
arch/arm/include/asm/arch-exynos/gpio.h |
19 +++
arch/arm/include/asm/arch-exynos/i2s-regs.h |
66 ++++++++++
arch/arm/include/asm/arch-exynos/periph.h |
7 ++ arch/arm/include/asm/arch-exynos/sound.h
| 44 +++++++
arch/arm/include/asm/arch-exynos/spi.h |
78 ++++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h |
5 +- arch/arm/include/asm/arch-mx25/sys_proto.h
| 3 +
arch/arm/include/asm/arch-mx31/imx-regs.h |
27 +---
arch/arm/include/asm/arch-mx35/imx-regs.h |
4 + arch/arm/include/asm/arch-mx35/mmc_host_def.h
| 31 +++++
arch/arm/include/asm/arch-mx35/spl.h |
38 ++++++
arch/arm/include/asm/arch-mx35/sys_proto.h |
2 + arch/arm/include/asm/arch-mx5/mx5x_pins.h
| 6 +-
arch/arm/include/asm/arch-mx5/sys_proto.h |
10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h |
2 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 149 ++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h |
10 +-
arch/arm/include/asm/arch-mxs/imx-regs.h |
7 +- arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
| 6 +- arch/arm/include/asm/arch-mxs/{regs-power.h =>
regs-power-mx28.h} | 4 +-
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
7 +- arch/arm/include/asm/arch-tegra20/dc.h
| 545
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/display.h |
152 ++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/pinmux.h |
4 +- arch/arm/include/asm/arch-tegra20/pwm.h
| 75 +++++++++++
arch/arm/include/asm/system.h |
31 +++++
arch/arm/lib/cache-cp15.c |
51 ++++++--
board/compal/paz00/paz00.c |
5 +- board/compulab/dts/tegra20-trimslice.dts
| 3 +-
board/compulab/trimslice/trimslice.c |
8 ++ board/freescale/mx25pdk/mx25pdk.c
| 121 ++++++++++++++++++
board/freescale/mx31ads/u-boot.lds |
2 + board/freescale/mx35pdk/lowlevel_init.S
| 4 +
board/freescale/mx35pdk/mx35pdk.c |
21 ++++
board/freescale/mx53loco/mx53loco.c |
2 +- board/nvidia/common/board.c
| 24 ++++
board/nvidia/dts/tegra20-seaboard.dts |
33 +++++
board/nvidia/harmony/harmony.c |
5 +- board/nvidia/seaboard/seaboard.c
| 5 +-
board/samsung/smdk5250/Makefile |
2 +- board/samsung/smdk5250/smdk5250.c
| 15 +++ board/samsung/smdk5250/{mmc_boot.c =>
spl_boot.c} | 31 ++++-
board/samsung/trats/trats.c |
80 ++++--------
board/samsung/universal_c210/Makefile |
1 - board/samsung/universal_c210/lowlevel_init.S
| 395 ---------------------------------------------------------
board/samsung/universal_c210/universal.c |
337 ++++++++++++++++++++++++++++++++++++++-----------
board/syteco/zmx25/zmx25.c |
1 + board/woodburn/Makefile
| 43 +++++++
board/woodburn/imximage.cfg |
4 + board/woodburn/lowlevel_init.S
| 38 ++++++
board/woodburn/woodburn.c |
264 +++++++++++++++++++++++++++++++++++++++
boards.cfg |
2 + common/Makefile
| 1 +
common/cmd_sound.c |
96 ++++++++++++++
common/lcd.c |
89 ++++++++++---
common/main.c |
12 +-
doc/README.imx5 |
5 + doc/device-tree-bindings/pwm/tegra20-pwm.txt
| 18 +++
doc/device-tree-bindings/video/displaymode.txt |
42 +++++++
doc/device-tree-bindings/video/tegra20-dc.txt |
85 +++++++++++++
drivers/gpio/mxc_gpio.c |
6 +- drivers/gpio/s5p_gpio.c
| 6 +-
drivers/input/tegra-kbc.c |
18 ++-
drivers/mmc/tegra_mmc.c |
7 +- drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_max77686.c |
48 +++++++
drivers/power/power_fsl.c |
8 +- drivers/serial/s3c64xx.c
| 3 +-
drivers/sound/Makefile |
48 +++++++
drivers/sound/samsung-i2s.c |
358 ++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/sound/sound.c |
228 +++++++++++++++++++++++++++++++++
drivers/sound/wm8994.c |
792
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/sound/wm8994.h |
87 +++++++++++++
drivers/sound/wm8994_registers.h |
299 ++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/Makefile |
1 + drivers/spi/exynos_spi.c
| 367 +++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/mxc_spi.c |
9 +- drivers/usb/host/ehci-mx5.c
| 146 ++++++++++++++++++----
drivers/usb/host/ehci-mx6.c |
5 + drivers/usb/host/ehci-mxc.c
| 225 +++++++++++++++++++++++++--------
drivers/video/Makefile |
2 + drivers/video/exynos_fb.c
| 15 ++-
drivers/video/ipu_regs.h |
2 +- drivers/video/ld9040.c
| 144 +++++++++++++++++++++
drivers/video/tegra.c |
379 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/watchdog/Makefile |
1 + arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
| 0
include/configs/harmony.h |
4 +- include/configs/mx25pdk.h
| 43 ++++++-
include/configs/mx28evk.h |
2 +- include/configs/mx31pdk.h
| 2 +-
include/configs/mx35pdk.h |
18 ++-
include/configs/mx51_efikamx.h |
1 + include/configs/mx51evk.h
| 5 +-
include/configs/mx53evk.h |
1 + include/configs/mx53loco.h
| 4 +-
include/configs/mx6qarm2.h |
1 + include/configs/mx6qsabre_common.h
| 4 +-
include/configs/mx6qsabrelite.h |
3 +- include/configs/palmld.h
| 3 +
include/configs/palmtc.h |
3 + include/configs/paz00.h
| 3 +
include/configs/s5pc210_universal.h |
36 ++++++
include/configs/seaboard.h |
16 ++-
include/configs/smdk5250.h |
74 ++++++++++-
include/configs/tec.h |
1 - include/configs/tegra-common-post.h
| 43 +++----
include/configs/tegra20-common.h |
3 + include/configs/trats.h
| 17 ++-
include/configs/trimslice.h |
4 + include/configs/ventana.h
| 3 +
include/configs/vision2.h |
1 + include/configs/whistler.h
| 3 +
include/configs/woodburn.h |
34 +++++
include/configs/woodburn_common.h |
313 ++++++++++++++++++++++++++++++++++++++++++++++
include/configs/woodburn_sd.h |
60 +++++++++
include/configs/zipitz2.h |
3 + include/configs/zmx25.h
| 6 +-
include/fdtdec.h |
2 + include/i2s.h
| 127 +++++++++++++++++++
include/lcd.h |
11 ++
include/ld9040.h |
32 +++++
include/mc34704.h |
49 ++++++++
include/power/max77686_pmic.h |
158 +++++++++++++++++++++++
include/power/max8998_pmic.h |
2 + include/sound.h
| 62 +++++++++
include/usb/ehci-fsl.h |
28 ++++-
lib/fdtdec.c |
2 + nand_spl/board/freescale/mx31pdk/u-boot.lds
| 2 +
spl/Makefile |
6 + 163 files changed, 8451 insertions(+), 1094 deletions(-) create
mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c create mode 100644
arch/arm/cpu/arm1136/u-boot-spl.lds create mode 100644
arch/arm/cpu/arm1176/s3c64xx/init.c create mode 100644
arch/arm/cpu/armv7/tegra20/display.c create mode 100644
arch/arm/cpu/armv7/tegra20/pwm.c create mode 100644
arch/arm/include/asm/arch-exynos/i2s-regs.h create mode 100644
arch/arm/include/asm/arch-exynos/sound.h create mode 100644
arch/arm/include/asm/arch-exynos/spi.h create mode 100644
arch/arm/include/asm/arch-mx35/mmc_host_def.h create mode 100644
arch/arm/include/asm/arch-mx35/spl.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6dl_pins.h rename
arch/arm/include/asm/arch-mxs/{regs-power.h => regs-power-mx28.h}
(99%) create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h create
mode 100644 arch/arm/include/asm/arch-tegra20/display.h create mode
100644 arch/arm/include/asm/arch-tegra20/pwm.h rename
board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) delete mode
100644 board/samsung/universal_c210/lowlevel_init.S create mode 100644
board/woodburn/Makefile create mode 100644 board/woodburn/imximage.cfg
create mode 100644 board/woodburn/lowlevel_init.S create mode 100644
board/woodburn/woodburn.c create mode 100644 common/cmd_sound.c create
mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode
100644 doc/device-tree-bindings/video/displaymode.txt create mode
100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode
100644 drivers/power/pmic/pmic_max77686.c create mode 100644
drivers/sound/Makefile create mode 100644 drivers/sound/samsung-i2s.c
create mode 100644 drivers/sound/sound.c create mode 100644
drivers/sound/wm8994.c create mode 100644 drivers/sound/wm8994.h
create mode 100644 drivers/sound/wm8994_registers.h create mode 100644
drivers/spi/exynos_spi.c create mode 100644 drivers/video/ld9040.c
create mode 100644 drivers/video/tegra.c rename
arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
(100%) create mode 100644 include/configs/woodburn.h create mode
100644 include/configs/woodburn_common.h create mode 100644
include/configs/woodburn_sd.h create mode 100644 include/i2s.h create
mode 100644 include/ld9040.h create mode 100644 include/mc34704.h
create mode 100644 include/power/max77686_pmic.h create mode 100644 include/sound.h
Amicalement,
Signature · 1 line
Albert.
Quoted 510 lines · Albert ARIBAUD
Hello Tom,
The following changes since commit
095728803eedfce850a2f85828f79500cb09979e:Merge branch 'master' of
git://git.denx.de/u-boot-net(2012-12-17 18:39:50 -0700)are available in the git repository at:
git://git.denx.de/u-boot-armmasterfor you to fetch changes up to
96764df1b47ddebfb50fadf5af72530b07b5fc89:Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
This pull request is specifically to get past the big merge issues from u-boot-arm to u-boot which involved samsung, ixm and tegra fixes, thanks to all those who took part in helping untie the knot. Once this is in, I'll certainly have another pull request, early in the coming week.
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge samsung, imx, tegra into u-boot-arm/masterAllen Martin (2):
tegra: addCONSOLE_MUXsupport to tegra-kbc Merge remote-tracking branch 'u-boot/master' into
u-boot-arm-mergedAshok Kumar Reddy (1):
ARM: arm1176: Define arch_cpu_init() for s3c64xxBeno??t Th??baudeau (17):
arm1136: Fixenable_caches()
mx31: Move EHCI definitions toehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: FixOC_DISusage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missingOC_DISfor i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Makeboard_ehci_hcd_init()optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Marklowlevel_initboard-specific codeChander Kashyap (1):
Exynos5250: Enable PXE SupportFabio Estevam (28):
mx25pdk: IncludeCONFIG_MX25
mx25pdk: Add esdhc support
pmic_fsl: IntroduceFSL_PMIC_I2C_LENGTH
mx25: Place common functions intosys_proto.h
pmic: Add support for mc34704
mx25pdk: Add Ethernet support
mx53loco: Allow booting a zImage kernel
mx25pdk: Allow booting a zImage kernel
mx51evk: Allow booting a zImage kernel
mx35pdk: Allow booting a zImage kernel
mx6qsabre_common: Allow booting a zImage kernel
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi:mxc_spi: Fix handling of chip select
spi:mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: ConfigureCONFIG_BOOTDELAYto one second
mx53loco: ConfigureCONFIG_BOOTDELAYto one second
mx6qsabrelite: ConfigureCONFIG_BOOTDELAYto one second
mx6qsabre_common: ConfigureCONFIG_BOOTDELAYto one second
mx51evk: ConfigureCONFIG_BOOTDELAYto one second
mx25pdk: ConfigureCONFIG_BOOTDELAYto one second
mx31pdk: ConfigureCONFIG_BOOTDELAYto one second
mx35pdk: ConfigureCONFIG_BOOTDELAYto one second
mx25pdk: Adapt it for the new PMIC framework
woodburn: Set gpio value ingpio_direction_output()
mx53loco: Fix PMIC name
mx25pdk: Allow booting a device tree kernelHatim RV (3):
EXYNOS: Add clock for SPI
EXYNOS5: Add base address for SPI
EXYNOS5: Enable SPIMarek Vasut (9):
dm: wdt: Move s5p watchdog timer todrivers/watchdog/
mx28: Fix typo inPOWER_MINPWR_VBG_OFF
mx28: Fix typo inPOWER_DCLIMITS_NEGLIMIT_OFFSET
mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
mx28: Renameregs-power.htoregs-power-mx28.h
mxs: Silence elftosb
mxs: Implement common function to setup VDDx
mxs: Properly setup VDDD in power supply setup code
mxs: Staticize SPL functionsMayuresh Kulkarni (1):
tegra: Enable display/lcd support on SeaboardMinkyu Kang (6):
ARCH: EXYNOS: add support to match product id
EXYNOS: Clock: Add common function for pll rate calculation
s3c64xx: fix the compiler error and warning
Merge branch 'master' ofgit://git.denx.de/u-bootinto resolve
universal_c210: fix compiler error and compiler warning
universal_c210: check the NULL pointer when get the PMICOtavio Salvador (1):
mxs: SPL: Generalize memory initializationPiotr Wilczek (12):
arm:exynos4:trats: Correct SDRAM configuration for trats arm:exynos4:trats: Fix SDRAM size arm:exynos4:pinmux: Modify the gpio function for mmc arm:exynos4:trats: Use pinmux for mmc configuration arm:exynos4:universal: Use pinmux for mmc configuration arm:exynos4:universal: Eliminated low level init
arm: trats: Power down core 1
exynos4:universal_C210: use software SPI misc:max8998 Add LDO macros
drivers: video: Add ld9040 video driver
drivers: video: fix image position
exynos4:universal_C210: add display supportRajeshwari Shinde (16):
PMIC: MAX77686: Add support for MAX77686
SMDK5250: Config: Enable MAX77686 pmic chip
SOUND: SAMSUNG: Add I2S driver
SOUND: Add WM8994 codec
Sound: Add command for audio playback
EXYNOS: Add I2S registers
EXYNOS: Add parameters required by I2S
EXYNOS: Add pinmux for I2S
EXYNOS: Add I2S base address
EXYNOS: Add clock for I2S
SMDK5250: Enable Sound
EXYNOS5: Add pinmux support for SPI
SPI: Add SPI Driver for EXYNOS.
EXYNOS5: Enable SPI booting.
POWER: MAX77686: Modified as per the latest Implementation
SMDK5250: Enable pmic MAX77686Simon Glass (17):
pxa: Disable dcache on palmld, palmtc, zipitz2
tegra: Use const for pinmux_config_pingroup/table()
tegra: Add display support to funcmux
tegra: fdt: Add pwm binding and node
tegra: fdt: Add LCD definitions for Tegra
tegra: Add support for PWM
tegra: Add LCD driver
tegra: Add LCD support to Nvidia boards
arm: Add control over cachability of memory regions
lcd: AddCONFIG_LCD_ALIGNMENTto select frame buffer alignment
lcd: Add support for flushing LCD fb from dcache after update
tegra: Align LCD frame buffer to section boundary
tegra: Support control of cache settings for LCD
tegra: fdt: Add LCD definitions for Seaboard
lcd: AddCONFIG_CONSOLE_SCROLL_LINESoption to speed console
tegra: Remove unnecessaryCONFIG_SYS_NAND_BASE
tegra: config: seaboard: Move tegra-common-post to correct placeStefano Babic (9):
ARM: Fixstart.Swhen used with SPL in arm1136
MX35: addLOW_LEVEL_SRAM_STACKto useSPL_FRAMEWORK
MX35: Addsoc_boot_modeandsoc_boot_deviceto MX35
SPL: Added SPL target for mx35 SOC to SPLMakefile
ARM: Add SPL target to arm1136
MX35: add support for woodburn board
MX5: addedCONFIG_PMIC_FSL_MC13892to mx53evk Mergegit://git.denx.de/u-boot
Merge branch 'master' ofgit://git.denx.de/u-bootinto masterStephen Warren (4):
ARM: tegra: TrimSlice: add support for USB1 port
mmc: tegra: support 4-bit operation too on 8-bit slots
ARM: tegra: enable 8-bit SD slots in board files
tegra: use generic fs commands in BOOTCOMMANDTroy Kisky (4):
mx6: soc: updateget_cpu_revandget_imx_typefor mx6solo/sololite
mx6: useCONFIG_MX6instead ofCONFIG_MX6Q
imx-common: cpu: addimx_ddr_size
arch-mx6: addmx6dl_pins.hWei Ni (1):
tegra: Add SOC support for display/lcd??ukasz Majewski (1):
gpio:fix: Proper handling of GPIO subsystem parts at Samsung
devices
MAINTAINERS|
1 +Makefile
| 4 +-
README |
16 ++-
arch/arm/cpu/arm1136/config.mk|
3 +arch/arm/cpu/arm1136/cpu.c
| 22 ++--
arch/arm/cpu/arm1136/mx35/Makefile|
1 +arch/arm/cpu/arm1136/mx35/generic.c
| 75 +++++++++++
arch/arm/cpu/arm1136/mx35/mx35_sdram.c|
137 ++++++++++++++++++++
arch/arm/cpu/arm1136/start.S|
31 +++--
arch/arm/cpu/arm1136/u-boot-spl.lds|
62 +++++++++
arch/arm/cpu/arm1176/s3c64xx/Makefile|
2 +-arch/arm/cpu/arm1176/s3c64xx/init.c
| 26 ++++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c|
4 +-arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 38 +++---
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c|
305 ++++++++++++++++----------------------------
arch/arm/cpu/armv7/cache_v7.c|
11 ++
arch/arm/cpu/armv7/exynos/clock.c|
350 +++++++++++++++++++++++++++++++++++++++++----------
arch/arm/cpu/armv7/exynos/pinmux.c|
64 ++++++++++
arch/arm/cpu/armv7/mx5/clock.c|
4 +-arch/arm/cpu/armv7/mx5/lowlevel_init.S
| 2 +-
arch/arm/cpu/armv7/mx6/clock.c|
2 +arch/arm/cpu/armv7/mx6/soc.c
| 32 +++--
arch/arm/cpu/armv7/s5p-common/Makefile|
1 -arch/arm/cpu/armv7/tegra20/Makefile
| 2 +
arch/arm/cpu/armv7/tegra20/display.c|
409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/tegra20/pwm.c|
101 +++++++++++++++
arch/arm/cpu/tegra20-common/funcmux.c|
37 ++++++
arch/arm/cpu/tegra20-common/pinmux.c|
4 +-arch/arm/dts/tegra20.dtsi
| 105 ++++++++++++++++
arch/arm/imx-common/cpu.c|
66 ++++++++--
arch/arm/include/asm/arch-exynos/clk.h|
4 +arch/arm/include/asm/arch-exynos/clock.h
| 29 +++++
arch/arm/include/asm/arch-exynos/cpu.h|
18 +++
arch/arm/include/asm/arch-exynos/gpio.h|
19 +++
arch/arm/include/asm/arch-exynos/i2s-regs.h|
66 ++++++++++
arch/arm/include/asm/arch-exynos/periph.h|
7 ++arch/arm/include/asm/arch-exynos/sound.h
| 44 +++++++
arch/arm/include/asm/arch-exynos/spi.h|
78 ++++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h|
5 +-arch/arm/include/asm/arch-mx25/sys_proto.h
| 3 +
arch/arm/include/asm/arch-mx31/imx-regs.h|
27 +---
arch/arm/include/asm/arch-mx35/imx-regs.h|
4 +arch/arm/include/asm/arch-mx35/mmc_host_def.h
| 31 +++++
arch/arm/include/asm/arch-mx35/spl.h|
38 ++++++
arch/arm/include/asm/arch-mx35/sys_proto.h|
2 +arch/arm/include/asm/arch-mx5/mx5x_pins.h
| 6 +-
arch/arm/include/asm/arch-mx5/sys_proto.h|
10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h|
2 +arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 149 ++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h|
10 +-
arch/arm/include/asm/arch-mxs/imx-regs.h|
7 +-arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
| 6 +-arch/arm/include/asm/arch-mxs/{regs-power.h=>regs-power-mx28.h} | 4 +- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- arch/arm/include/asm/arch-tegra20/dc.h | 545 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-tegra20/display.h | 152 ++++++++++++++++++++++ arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- arch/arm/include/asm/arch-tegra20/pwm.h | 75 +++++++++++ arch/arm/include/asm/system.h | 31 +++++ arch/arm/lib/cache-cp15.c | 51 ++++++-- board/compal/paz00/paz00.c | 5 +- board/compulab/dts/tegra20-trimslice.dts | 3 +- board/compulab/trimslice/trimslice.c | 8 ++ board/freescale/mx25pdk/mx25pdk.c | 121 ++++++++++++++++++ board/freescale/mx31ads/u-boot.lds | 2 + board/freescale/mx35pdk/lowlevel_init.S | 4 + board/freescale/mx35pdk/mx35pdk.c | 21 ++++ board/freescale/mx53loco/mx53loco.c | 2 +- board/nvidia/common/board.c | 24 ++++ board/nvidia/dts/tegra20-seaboard.dts | 33 +++++ board/nvidia/harmony/harmony.c | 5 +- board/nvidia/seaboard/seaboard.c | 5 +- board/samsung/smdk5250/Makefile | 2 +- board/samsung/smdk5250/smdk5250.c | 15 +++ board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 ++++- board/samsung/trats/trats.c | 80 ++++-------- board/samsung/universal_c210/Makefile | 1 - board/samsung/universal_c210/lowlevel_init.S | 395 --------------------------------------------------------- board/samsung/universal_c210/universal.c | 337 ++++++++++++++++++++++++++++++++++++++----------- board/syteco/zmx25/zmx25.c | 1 + board/woodburn/Makefile | 43 +++++++ board/woodburn/imximage.cfg | 4 + board/woodburn/lowlevel_init.S | 38 ++++++ board/woodburn/woodburn.c | 264 +++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 + common/Makefile | 1 + common/cmd_sound.c | 96 ++++++++++++++ common/lcd.c | 89 ++++++++++--- common/main.c | 12 +- doc/README.imx5 | 5 + doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 +++ doc/device-tree-bindings/video/displaymode.txt | 42 +++++++ doc/device-tree-bindings/video/tegra20-dc.txt | 85 +++++++++++++ drivers/gpio/mxc_gpio.c | 6 +- drivers/gpio/s5p_gpio.c | 6 +- drivers/input/tegra-kbc.c | 18 ++- drivers/mmc/tegra_mmc.c | 7 +- drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pmic_max77686.c | 48 +++++++ drivers/power/power_fsl.c | 8 +- drivers/serial/s3c64xx.c | 3 +- drivers/sound/Makefile | 48 +++++++ drivers/sound/samsung-i2s.c | 358 ++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/sound/sound.c | 228 +++++++++++++++++++++++++++++++++ drivers/sound/wm8994.c | 792 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/sound/wm8994.h | 87 +++++++++++++ drivers/sound/wm8994_registers.h | 299 ++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/Makefile | 1 + drivers/spi/exynos_spi.c | 367 +++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/mxc_spi.c | 9 +- drivers/usb/host/ehci-mx5.c | 146 ++++++++++++++++++---- drivers/usb/host/ehci-mx6.c | 5 + drivers/usb/host/ehci-mxc.c | 225 +++++++++++++++++++++++++-------- drivers/video/Makefile | 2 + drivers/video/exynos_fb.c | 15 ++- drivers/video/ipu_regs.h | 2 +- drivers/video/ld9040.c | 144 +++++++++++++++++++++ drivers/video/tegra.c | 379 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/watchdog/Makefile | 1 + arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0 include/configs/harmony.h | 4 +- include/configs/mx25pdk.h | 43 ++++++- include/configs/mx28evk.h | 2 +- include/configs/mx31pdk.h | 2 +- include/configs/mx35pdk.h | 18 ++- include/configs/mx51_efikamx.h | 1 + include/configs/mx51evk.h | 5 +- include/configs/mx53evk.h | 1 + include/configs/mx53loco.h | 4 +- include/configs/mx6qarm2.h | 1 + include/configs/mx6qsabre_common.h | 4 +- include/configs/mx6qsabrelite.h | 3 +- include/configs/palmld.h | 3 + include/configs/palmtc.h | 3 + include/configs/paz00.h | 3 + include/configs/s5pc210_universal.h | 36 ++++++ include/configs/seaboard.h | 16 ++- include/configs/smdk5250.h | 74 ++++++++++- include/configs/tec.h | 1 - include/configs/tegra-common-post.h | 43 +++---- include/configs/tegra20-common.h | 3 + include/configs/trats.h | 17 ++- include/configs/trimslice.h | 4 + include/configs/ventana.h | 3 + include/configs/vision2.h | 1 + include/configs/whistler.h | 3 + include/configs/woodburn.h | 34 +++++ include/configs/woodburn_common.h | 313 ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/woodburn_sd.h | 60 +++++++++ include/configs/zipitz2.h | 3 + include/configs/zmx25.h | 6 +- include/fdtdec.h | 2 + include/i2s.h | 127 +++++++++++++++++++ include/lcd.h | 11 ++ include/ld9040.h | 32 +++++ include/mc34704.h | 49 ++++++++ include/power/max77686_pmic.h | 158 +++++++++++++++++++++++ include/power/max8998_pmic.h | 2 + include/sound.h | 62 +++++++++ include/usb/ehci-fsl.h | 28 ++++- lib/fdtdec.c | 2 + nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 + spl/Makefile | 6 + 163 files changed, 8451 insertions(+), 1094 deletions(-) create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c create mode 100644 arch/arm/cpu/armv7/tegra20/display.c create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h create mode 100644 arch/arm/include/asm/arch-exynos/sound.h create mode 100644 arch/arm/include/asm/arch-exynos/spi.h create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h create mode 100644 arch/arm/include/asm/arch-mx35/spl.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h rename arch/arm/include/asm/arch-mxs/{regs-power.h => regs-power-mx28.h} (99%) create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h create mode 100644 arch/arm/include/asm/arch-tegra20/display.h create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) delete mode 100644 board/samsung/universal_c210/lowlevel_init.S create mode 100644 board/woodburn/Makefile create mode 100644 board/woodburn/imximage.cfg create mode 100644 board/woodburn/lowlevel_init.S create mode 100644 board/woodburn/woodburn.c create mode 100644 common/cmd_sound.c create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode 100644 doc/device-tree-bindings/video/displaymode.txt create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode 100644 drivers/power/pmic/pmic_max77686.c create mode 100644 drivers/sound/Makefile create mode 100644 drivers/sound/samsung-i2s.c create mode 100644 drivers/sound/sound.c create mode 100644 drivers/sound/wm8994.c create mode 100644 drivers/sound/wm8994.h create mode 100644 drivers/sound/wm8994_registers.h create mode 100644 drivers/spi/exynos_spi.c create mode 100644 drivers/video/ld9040.c create mode 100644 drivers/video/tegra.c rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%) create mode 100644 include/configs/woodburn.h create mode 100644 include/configs/woodburn_common.h create mode 100644 include/configs/woodburn_sd.h create mode 100644 include/i2s.h create mode 100644 include/ld9040.h create mode 100644 include/mc34704.h create mode 100644 include/power/max77686_pmic.h create mode 100644
Quoted 1 line
include/sound.h
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121222/33bc92df/attachment.pgp>
Hi Albert,
2012? 12? 22? ???? Albert ARIBAUD?? ??:
Quoted 29 lines
Hello Tom,
The following changes since commit
095728803eedfce850a2f85828f79500cb09979e:Merge branch 'master' of
git://git.denx.de/u-boot-net(2012-12-17 18:39:50 -0700)are available in the git repository at:
git://git.denx.de/u-boot-armmasterfor you to fetch changes up to
96764df1b47ddebfb50fadf5af72530b07b5fc89:Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
This pull request is specifically to get past the big merge issues from u-boot-arm to u-boot which involved samsung, ixm and tegra fixes, thanks to all those who took part in helping untie the knot. Once this is in, I'll certainly have another pull request, early in the coming week.
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge samsung, imx, tegra into u-boot-arm/master
Hi Albert,
Quoted 36 lines
Hi Albert,
2012? 12? 22? ???? Albert ARIBAUD?? ??:
Quoted 25 lines
Hello Tom,
The following changes since commit
095728803eedfce850a2f85828f79500cb09979e:Merge branch 'master' of
git://git.denx.de/u-boot-net(2012-12-17 18:39:50 -0700)are available in the git repository at:
git://git.denx.de/u-boot-armmasterfor you to fetch changes up to
96764df1b47ddebfb50fadf5af72530b07b5fc89:Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22
11:59:14 +0100)This pull request is specifically to get past the big merge issues from u-boot-arm to u-boot which involved samsung, ixm and tegra fixes, thanks to all those who took part in helping untie the knot. Once this is in, I'll certainly have another pull request, early in the coming week.
Quoted 5 lines
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge samsung, imx, tegra into u-boot-arm/master
Quoted 4 lines
From this merge commit, i found "arm:exynos4:pinmux: Modify the gpio function for mmc" commit codes are removed.
It seems to be removed by manual merge with "exynos:pinmux: Add pinmux support for i2c" commit.
Joonyoung thanks for information. We have spotted this yesterday. Piotr has prepared patch for fixing this (will be posted very soon).
After Piotr's patch Trats recognizes eMMC device again.
Quoted 287 lines
Thanks.
Quoted 281 lines
Allen Martin (2):
tegra: addCONSOLE_MUXsupport to tegra-kbc Merge remote-tracking branch 'u-boot/master' into
u-boot-arm-mergedAshok Kumar Reddy (1):
ARM: arm1176: Define arch_cpu_init() for s3c64xxBeno?t Th?baudeau (17):
arm1136: Fixenable_caches()
mx31: Move EHCI definitions toehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: FixOC_DISusage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missingOC_DISfor i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Makeboard_ehci_hcd_init()optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Marklowlevel_initboard-specific codeChander Kashyap (1):
Exynos5250: Enable PXE SupportFabio Estevam (28):
mx25pdk: IncludeCONFIG_MX25
mx25pdk: Add esdhc support
pmic_fsl: IntroduceFSL_PMIC_I2C_LENGTH
mx25: Place common functions intosys_proto.h
pmic: Add support for mc34704
mx25pdk: Add Ethernet support
mx53loco: Allow booting a zImage kernel
mx25pdk: Allow booting a zImage kernel
mx51evk: Allow booting a zImage kernel
mx35pdk: Allow booting a zImage kernel
mx6qsabre_common: Allow booting a zImage kernel
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi:mxc_spi: Fix handling of chip select
spi:mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: ConfigureCONFIG_BOOTDELAYto one second
mx53loco: ConfigureCONFIG_BOOTDELAYto one second
mx6qsabrelite: ConfigureCONFIG_BOOTDELAYto one second
mx6qsabre_common: ConfigureCONFIG_BOOTDELAYto one second
mx51evk: ConfigureCONFIG_BOOTDELAYto one second
mx25pdk: ConfigureCONFIG_BOOTDELAYto one second
mx31pdk: ConfigureCONFIG_BOOTDELAYto one second
mx35pdk: ConfigureCONFIG_BOOTDELAYto one second
mx25pdk: Adapt it for the new PMIC framework
woodburn: Set gpio value ingpio_direction_output()
mx53loco: Fix PMIC name
mx25pdk: Allow booting a device tree kernelHatim RV (3):
EXYNOS: Add clock for SPI
EXYNOS5: Add base address for SPI
EXYNOS5: Enable SPIMarek Vasut (9):
dm: wdt: Move s5p watchdog timer todrivers/watchdog/
mx28: Fix typo inPOWER_MINPWR_VBG_OFF
mx28: Fix typo inPOWER_DCLIMITS_NEGLIMIT_OFFSET
mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
mx28: Renameregs-power.htoregs-power-mx28.h
mxs: Silence elftosb
mxs: Implement common function to setup VDDx
mxs: Properly setup VDDD in power supply setup code
mxs: Staticize SPL functionsMayuresh Kulkarni (1):
tegra: Enable display/lcd support on SeaboardMinkyu Kang (6):
ARCH: EXYNOS: add support to match product id
EXYNOS: Clock: Add common function for pll rate calculation
s3c64xx: fix the compiler error and warning
Merge branch 'master' ofgit://git.denx.de/u-bootinto resolve
universal_c210: fix compiler error and compiler warning
universal_c210: check the NULL pointer when get the PMICOtavio Salvador (1):
mxs: SPL: Generalize memory initializationPiotr Wilczek (12):
arm:exynos4:trats: Correct SDRAM configuration for trats arm:exynos4:trats: Fix SDRAM size arm:exynos4:pinmux: Modify the gpio function for mmc arm:exynos4:trats: Use pinmux for mmc configuration arm:exynos4:universal: Use pinmux for mmc configuration arm:exynos4:universal: Eliminated low level init
arm: trats: Power down core 1
exynos4:universal_C210: use software SPI misc:max8998 Add LDO macros
drivers: video: Add ld9040 video driver
drivers: video: fix image position
exynos4:universal_C210: add display supportRajeshwari Shinde (16):
PMIC: MAX77686: Add support for MAX77686
SMDK5250: Config: Enable MAX77686 pmic chip
SOUND: SAMSUNG: Add I2S driver
SOUND: Add WM8994 codec
Sound: Add command for audio playback
EXYNOS: Add I2S registers
EXYNOS: Add parameters required by I2S
EXYNOS: Add pinmux for I2S
EXYNOS: Add I2S base address
EXYNOS: Add clock for I2S
SMDK5250: Enable Sound
EXYNOS5: Add pinmux support for SPI
SPI: Add SPI Driver for EXYNOS.
EXYNOS5: Enable SPI booting.
POWER: MAX77686: Modified as per the latest Implementation
SMDK5250: Enable pmic MAX77686Simon Glass (17):
pxa: Disable dcache on palmld, palmtc, zipitz2
tegra: Use const for pinmux_config_pingroup/table()
tegra: Add display support to funcmux
tegra: fdt: Add pwm binding and node
tegra: fdt: Add LCD definitions for Tegra
tegra: Add support for PWM
tegra: Add LCD driver
tegra: Add LCD support to Nvidia boards
arm: Add control over cachability of memory regions
lcd: AddCONFIG_LCD_ALIGNMENTto select frame buffer alignment
lcd: Add support for flushing LCD fb from dcache after update
tegra: Align LCD frame buffer to section boundary
tegra: Support control of cache settings for LCD
tegra: fdt: Add LCD definitions for Seaboard
lcd: AddCONFIG_CONSOLE_SCROLL_LINESoption to speed console
tegra: Remove unnecessaryCONFIG_SYS_NAND_BASE
tegra: config: seaboard: Move tegra-common-post to correct
placeStefano Babic (9):
ARM: Fixstart.Swhen used with SPL in arm1136
MX35: addLOW_LEVEL_SRAM_STACKto useSPL_FRAMEWORK
MX35: Addsoc_boot_modeandsoc_boot_deviceto MX35
SPL: Added SPL target for mx35 SOC to SPLMakefile
ARM: Add SPL target to arm1136
MX35: add support for woodburn board
MX5: addedCONFIG_PMIC_FSL_MC13892to mx53evk Mergegit://git.denx.de/u-boot
Merge branch 'master' ofgit://git.denx.de/u-bootinto masterStephen Warren (4):
ARM: tegra: TrimSlice: add support for USB1 port
mmc: tegra: support 4-bit operation too on 8-bit slots
ARM: tegra: enable 8-bit SD slots in board files
tegra: use generic fs commands in BOOTCOMMANDTroy Kisky (4):
mx6: soc: updateget_cpu_revandget_imx_typefor
mx6solo/sololite mx6: useCONFIG_MX6instead ofCONFIG_MX6Q
imx-common: cpu: addimx_ddr_size
arch-mx6: addmx6dl_pins.hWei Ni (1):
tegra: Add SOC support for display/lcd?ukasz Majewski (1):
gpio:fix: Proper handling of GPIO subsystem parts at Samsung
devices
MAINTAINERS|
1 +Makefile
| 4 +-
README |
16 ++-
arch/arm/cpu/arm1136/config.mk|
3 +arch/arm/cpu/arm1136/cpu.c
| 22 ++--
arch/arm/cpu/arm1136/mx35/Makefile|
1 +arch/arm/cpu/arm1136/mx35/generic.c
| 75 +++++++++++
arch/arm/cpu/arm1136/mx35/mx35_sdram.c|
137 ++++++++++++++++++++
arch/arm/cpu/arm1136/start.S|
31 +++--
arch/arm/cpu/arm1136/u-boot-spl.lds|
62 +++++++++
arch/arm/cpu/arm1176/s3c64xx/Makefile|
2 +-arch/arm/cpu/arm1176/s3c64xx/init.c
| 26 ++++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c|
4 +-arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 38 +++---
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c|
305 ++++++++++++++++----------------------------
arch/arm/cpu/armv7/cache_v7.c|
11 ++
arch/arm/cpu/armv7/exynos/clock.c|
350 +++++++++++++++++++++++++++++++++++++++++----------
arch/arm/cpu/armv7/exynos/pinmux.c|
64 ++++++++++
arch/arm/cpu/armv7/mx5/clock.c|
4 +-arch/arm/cpu/armv7/mx5/lowlevel_init.S
| 2 +-
arch/arm/cpu/armv7/mx6/clock.c|
2 +arch/arm/cpu/armv7/mx6/soc.c
| 32 +++--
arch/arm/cpu/armv7/s5p-common/Makefile|
1 -arch/arm/cpu/armv7/tegra20/Makefile
| 2 +
arch/arm/cpu/armv7/tegra20/display.c|
409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/tegra20/pwm.c|
101 +++++++++++++++
arch/arm/cpu/tegra20-common/funcmux.c|
37 ++++++
arch/arm/cpu/tegra20-common/pinmux.c|
4 +-arch/arm/dts/tegra20.dtsi
| 105 ++++++++++++++++
arch/arm/imx-common/cpu.c|
66 ++++++++--
arch/arm/include/asm/arch-exynos/clk.h|
4 +arch/arm/include/asm/arch-exynos/clock.h
| 29 +++++
arch/arm/include/asm/arch-exynos/cpu.h|
18 +++
arch/arm/include/asm/arch-exynos/gpio.h|
19 +++
arch/arm/include/asm/arch-exynos/i2s-regs.h|
66 ++++++++++
arch/arm/include/asm/arch-exynos/periph.h|
7 ++arch/arm/include/asm/arch-exynos/sound.h
| 44 +++++++
arch/arm/include/asm/arch-exynos/spi.h|
78 ++++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h|
5 +-arch/arm/include/asm/arch-mx25/sys_proto.h
| 3 +
arch/arm/include/asm/arch-mx31/imx-regs.h|
27 +---
arch/arm/include/asm/arch-mx35/imx-regs.h|
4 +arch/arm/include/asm/arch-mx35/mmc_host_def.h
| 31 +++++
arch/arm/include/asm/arch-mx35/spl.h|
38 ++++++
arch/arm/include/asm/arch-mx35/sys_proto.h|
2 +arch/arm/include/asm/arch-mx5/mx5x_pins.h
| 6 +-
arch/arm/include/asm/arch-mx5/sys_proto.h|
10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h|
2 +arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 149 ++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h|
10 +-
arch/arm/include/asm/arch-mxs/imx-regs.h|
7 +-arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
| 6 +-arch/arm/include/asm/arch-mxs/{regs-power.h=>regs-power-mx28.h} | 4 +-
arch/arm/include/asm/arch-s5pc1xx/gpio.h|
7 +-arch/arm/include/asm/arch-tegra20/dc.h
| 545+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/display.h|
152 ++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/pinmux.h|
4 +-arch/arm/include/asm/arch-tegra20/pwm.h
| 75 +++++++++++
arch/arm/include/asm/system.h|
31 +++++
arch/arm/lib/cache-cp15.c--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de <javascript:;>
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Poland (SRPOL) | Linux Platform Group