Skip to contentSkip to conversation

Pull request: u-boot-arm/master

U-Boot Albert ARIBAUD 2 participants 2 messages Jan 11, 2013

lore
Share & tools
lore
#0 lore raw

Hello Tom,

The following changes since commit
61bdb9133593f0f881a57232039296f64bd662ed:

arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

for you to fetch changes up to 59ee45ee91cc91b392a8e2684bfcb8c933ce4967:

Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-01-11 18:17:33 +0100)

----------------------------------------------------------------

Albert ARIBAUD (6):
mv88e61xx: refactor PHY and SWITCH level-code
kirkwood: make MPP arrays static const
ARM: lacie_kw: add support for WIRELESS_SPACE Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master' Merge 'u-boot-atmel/master' into 'u-boot-arm/master' Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

Andreas Bie?mann (1):
mv-common.h: increase malloc arena to 4MiB

Arun Mankuzhi (1):
arm: move flush_dcache_all() to just before disable cache

Bo Shen (1):
spi: atmel: sam9m10g45 also support WDRBT bit

Gabe Black (1):
arm: Keep track of the tlb size as well as its location

Holger Brunck (3):
arm/km: fix memory settings
km/common: drop unneeded std* environment variables km/common: cosmetic change reported from checkpatch

Javier Martinez Canillas (3):

      OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for

CONFIG_SPL_NAND_SUPPORT serial/ns16550: add an option to avoid hanging on broken platforms OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT

Luke Lowrey (1):
arch-kirkwood: Ethernet port macro returning incorrect address

Michael Walle (1):
lsxl: unset ncip for rescue mode

Nishanth Menon (1):
Makefile: remove MLO.byteswap on clobber

Richard Genoud (3):
at91sam9x5: enable USB support for 9x5ek board.
at91sam9x5ek: regroup FAT/DOS features
at91sam9x5ek: add USB configuration

Simon Glass (6):
arm: Move fdt check earlier so that board_early_init_f() can use
it arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
Document the CONFIG_DISPLAY_BOARDINFO option
arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on
LCD Add option to display customised memory information
arm: Move bootstage record for board_init_f() to after
arch_cpu_init()

Taylor Hutt (1):
arm: Tabify code for MMC initialization

Tom Wai-Hong Tam (1):
arm: Make interrupts.o and reset.o in libarm also appear in SPL

Valentin Longchamp (1):
arm/km: remove duplicate code

 Makefile                                         |    2 +-
 README                                           |   28 ++
 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |   13 +
 arch/arm/cpu/arm926ejs/kirkwood/mpp.c            |    2 +-
 arch/arm/include/asm/arch-at91/at91sam9x5.h      |    2 +
 arch/arm/include/asm/arch-kirkwood/cpu.h         |    2 +-
 arch/arm/include/asm/arch-kirkwood/mpp.h         |    2 +-
 arch/arm/include/asm/global_data.h               |    1 +
 arch/arm/lib/Makefile                            |    5 +-
 arch/arm/lib/board.c                             |   75 +++-
 arch/arm/lib/cache-cp15.c                        |    5 +-
 board/LaCie/net2big_v2/net2big_v2.c              |    2 +-
 board/LaCie/netspace_v2/netspace_v2.c            |    2 +-
 board/LaCie/wireless_space/Makefile              |   46 ++
 board/LaCie/wireless_space/kwbimage.cfg          |   82 ++++
 board/LaCie/wireless_space/wireless_space.c      |  176 ++++++++
 board/Marvell/dreamplug/dreamplug.c              |    2 +-
 board/Marvell/guruplug/guruplug.c                |    2 +-
 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c  |    2 +-
 board/Marvell/openrd/openrd.c                    |    2 +-
 board/Marvell/rd6281a/rd6281a.c                  |    2 +-
 board/Marvell/sheevaplug/sheevaplug.c            |    2 +-
 board/Seagate/dockstar/dockstar.c                |    2 +-
 board/atmel/at91sam9x5ek/at91sam9x5ek.c          |    3 +
 board/buffalo/lsxl/lsxl.c                        |    7 +-
 board/cloudengines/pogo_e02/pogo_e02.c           |    2 +-
 board/d-link/dns325/dns325.c                     |    2 +-
 board/iomega/iconnect/iconnect.c                 |    2 +-
 board/karo/tk71/tk71.c                           |    2 +-
 board/keymile/common/common.c                    |    2 +-
 board/keymile/km_arm/km_arm.c                    |   16 +-
 board/keymile/km_arm/kwbimage-memphis.cfg        |    6 +-
 board/keymile/km_arm/kwbimage.cfg                |    6 +-
 board/keymile/km_arm/kwbimage_128M16_1.cfg       |   25 +-
 board/keymile/km_arm/kwbimage_256M8_1.cfg        |   25 +-
 board/raidsonic/ib62x0/ib62x0.c                  |    2 +-
 boards.cfg                                       |    1 +
 common/cmd_mem.c                                 |   27 ++
 drivers/net/phy/mv88e61xx.c                      |  495
 ++++++++++++++--------
 drivers/net/phy/mv88e61xx.h                      |   39 +-
 drivers/serial/ns16550.c                         |    2 +
 drivers/spi/atmel_spi.c                          |    2 +-
 drivers/spi/kirkwood_spi.c                       |   12 +-
 drivers/usb/host/ohci-at91.c                     |    6 +-
 include/common.h                                 |    9 +
 include/config_cmd_all.h                         |    1 +
 include/configs/at91sam9x5ek.h                   |   29 +-
 include/configs/igep00x0.h                       |    4 +
 include/configs/km/keymile-common.h              |    3 -
 include/configs/lsxl.h                           |    2 +-
 include/configs/mv-common.h                      |    2 +-
 include/configs/wireless_space.h                 |  194 +++++++++

include/netdev.h | 21 +- 53 files
changed, 1090 insertions(+), 318 deletions(-) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c create mode 100644 include/configs/wireless_space.h

Amicalement,

Signature · 1 line
Albert.
#1 lore raw
Quoted 133 lines · Albert ARIBAUD

Hello Tom,

The following changes since commit
61bdb9133593f0f881a57232039296f64bd662ed:

arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

for you to fetch changes up to 59ee45ee91cc91b392a8e2684bfcb8c933ce4967:

Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-01-11 18:17:33 +0100)

----------------------------------------------------------------

Albert ARIBAUD (6):
mv88e61xx: refactor PHY and SWITCH level-code
kirkwood: make MPP arrays static const
ARM: lacie_kw: add support for WIRELESS_SPACE Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master' Merge 'u-boot-atmel/master' into 'u-boot-arm/master' Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

Andreas Bie??mann (1):
mv-common.h: increase malloc arena to 4MiB

Arun Mankuzhi (1):
arm: move flush_dcache_all() to just before disable cache

Bo Shen (1):
spi: atmel: sam9m10g45 also support WDRBT bit

Gabe Black (1):
arm: Keep track of the tlb size as well as its location

Holger Brunck (3):
arm/km: fix memory settings
km/common: drop unneeded std* environment variables km/common: cosmetic change reported from checkpatch

Javier Martinez Canillas (3):

      OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for

CONFIG_SPL_NAND_SUPPORT serial/ns16550: add an option to avoid hanging on broken platforms OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT

Luke Lowrey (1):
arch-kirkwood: Ethernet port macro returning incorrect address

Michael Walle (1):
lsxl: unset ncip for rescue mode

Nishanth Menon (1):
Makefile: remove MLO.byteswap on clobber

Richard Genoud (3):
at91sam9x5: enable USB support for 9x5ek board.
at91sam9x5ek: regroup FAT/DOS features
at91sam9x5ek: add USB configuration

Simon Glass (6):
arm: Move fdt check earlier so that board_early_init_f() can use
it arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
Document the CONFIG_DISPLAY_BOARDINFO option
arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on
LCD Add option to display customised memory information
arm: Move bootstage record for board_init_f() to after
arch_cpu_init()

Taylor Hutt (1):
arm: Tabify code for MMC initialization

Tom Wai-Hong Tam (1):
arm: Make interrupts.o and reset.o in libarm also appear in SPL

Valentin Longchamp (1):
arm/km: remove duplicate code

 Makefile                                         |    2 +-
 README                                           |   28 ++
 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |   13 +
 arch/arm/cpu/arm926ejs/kirkwood/mpp.c            |    2 +-
 arch/arm/include/asm/arch-at91/at91sam9x5.h      |    2 +
 arch/arm/include/asm/arch-kirkwood/cpu.h         |    2 +-
 arch/arm/include/asm/arch-kirkwood/mpp.h         |    2 +-
 arch/arm/include/asm/global_data.h               |    1 +
 arch/arm/lib/Makefile                            |    5 +-
 arch/arm/lib/board.c                             |   75 +++-
 arch/arm/lib/cache-cp15.c                        |    5 +-
 board/LaCie/net2big_v2/net2big_v2.c              |    2 +-
 board/LaCie/netspace_v2/netspace_v2.c            |    2 +-
 board/LaCie/wireless_space/Makefile              |   46 ++
 board/LaCie/wireless_space/kwbimage.cfg          |   82 ++++
 board/LaCie/wireless_space/wireless_space.c      |  176 ++++++++
 board/Marvell/dreamplug/dreamplug.c              |    2 +-
 board/Marvell/guruplug/guruplug.c                |    2 +-
 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c  |    2 +-
 board/Marvell/openrd/openrd.c                    |    2 +-
 board/Marvell/rd6281a/rd6281a.c                  |    2 +-
 board/Marvell/sheevaplug/sheevaplug.c            |    2 +-
 board/Seagate/dockstar/dockstar.c                |    2 +-
 board/atmel/at91sam9x5ek/at91sam9x5ek.c          |    3 +
 board/buffalo/lsxl/lsxl.c                        |    7 +-
 board/cloudengines/pogo_e02/pogo_e02.c           |    2 +-
 board/d-link/dns325/dns325.c                     |    2 +-
 board/iomega/iconnect/iconnect.c                 |    2 +-
 board/karo/tk71/tk71.c                           |    2 +-
 board/keymile/common/common.c                    |    2 +-
 board/keymile/km_arm/km_arm.c                    |   16 +-
 board/keymile/km_arm/kwbimage-memphis.cfg        |    6 +-
 board/keymile/km_arm/kwbimage.cfg                |    6 +-
 board/keymile/km_arm/kwbimage_128M16_1.cfg       |   25 +-
 board/keymile/km_arm/kwbimage_256M8_1.cfg        |   25 +-
 board/raidsonic/ib62x0/ib62x0.c                  |    2 +-
 boards.cfg                                       |    1 +
 common/cmd_mem.c                                 |   27 ++
 drivers/net/phy/mv88e61xx.c                      |  495
 ++++++++++++++--------
 drivers/net/phy/mv88e61xx.h                      |   39 +-
 drivers/serial/ns16550.c                         |    2 +
 drivers/spi/atmel_spi.c                          |    2 +-
 drivers/spi/kirkwood_spi.c                       |   12 +-
 drivers/usb/host/ohci-at91.c                     |    6 +-
 include/common.h                                 |    9 +
 include/config_cmd_all.h                         |    1 +
 include/configs/at91sam9x5ek.h                   |   29 +-
 include/configs/igep00x0.h                       |    4 +
 include/configs/km/keymile-common.h              |    3 -
 include/configs/lsxl.h                           |    2 +-
 include/configs/mv-common.h                      |    2 +-
 include/configs/wireless_space.h                 |  194 +++++++++
Quoted 6 lines

include/netdev.h | 21 +- 53 files
changed, 1090 insertions(+), 318 deletions(-) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c create mode 100644 include/configs/wireless_space.h

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130111/888a8e38/attachment.pgp>