Installation of i686 SDK on a x86_64 machine?
Hi,
in previous releases it ha always been possible to install a SDK configured for a i686 machine on both x86 and x86_64 systems.
Since commit c04f5435 "populate_sdk_base.bbclass: use SDK_ARCH instead of SDKMACHINE" this does not work any more; instead, installation will abort with "Error: Installation machine not supported!"
++ uname -m
++ sed -e 's/i[3-6]86/ix86/' -e 's/x86[-_]64/x86_64/'
+ INST_ARCH=x86_64
++ echo i686
++ sed -e 's/i[5-6]86/ix86/'
+ SDK_ARCH=ix86
+ '[' x86_64 '!=' ix86 ']'
+ echo 'Error: Installation machine not supported!'
Error: Installation machine not supported!
+ exit -1
Is this intended behaviour (and if so, why?) or rather a bug that should be reported and fixed?
Thanks in advance.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] If there was anything that depressed him more than his own cynicism, it was that quite often it still wasn't as cynical as real life. - Terry Pratchett, _Guards! Guards!_
Hi Wolfgang,
Quoted 21 lines · Wolfgang Denk
Hi,
in previous releases it ha always been possible to install a SDK configured for a i686 machine on both x86 and
x86_64systems.Since commit
c04f5435"populate_sdk_base.bbclass: useSDK_ARCHinstead of SDKMACHINE" this does not work any more; instead, installation will abort with "Error: Installation machine not supported!"++ uname -m
++ sed -e 's/i[3-6]86/ix86/' -e 's/x86[-_]64/x86_64/'
+ INST_ARCH=x86_64
++ echo i686
++ sed -e 's/i[5-6]86/ix86/'
+ SDK_ARCH=ix86
+ '['x86_64'!=' ix86 ']'
+ echo 'Error: Installation machine not supported!'
Error: Installation machine not supported!
+ exit -1
Quoted 2 lines
Is this intended behaviour (and if so, why?) or rather a bug that should be reported and fixed?
This is the intended behavior. Please check:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3269
Also, this thread:
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-November/031519.html
If people really need to install SDK tarballs intended for other hosts than the SDK was built for (i686 on x86_64 or vice-versa), we could add a -f flag to force installation and show an error message like this:
"Error: Installation machine not supported! Use -f to force installation."
Thanks,
Laurentiu
Quoted 7 lines
Thanks in advance.
Best regards,
Wolfgang Denk
Dear Laurentiu,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 7 lines
in previous releases it ha always been possible to install a SDK configured for a i686 machine on both x86 and
x86_64systems.Since commit
c04f5435"populate_sdk_base.bbclass: useSDK_ARCHinstead of SDKMACHINE" this does not work any more; instead, installation will abort with "Error: Installation machine not supported!"
...
Quoted 4 lines
Quoted 2 lines
Is this intended behaviour (and if so, why?) or rather a bug that should be reported and fixed?
This is the intended behavior. Please check:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3269
Sorry, but this bug is about a different problem - the fix overshoots the mark.
The following combinations of SDK_ARCH and INST_ARCH are possible and relevant here:
Id SDK_ARCH INST_ARCH Status
==============================================
1 ix86 ix86 works
2 ix86 x86_64 works
3 x86_64 ix86 cannot work
4 x86_64 x86_64 works
The bug report is about case 3 - attempting to install a 64 bit SDK on a 32 bit machine. This indeed cannot work and shuld be prevented byy the installer.
But the current code also prevents case 2, installing 32 bit images on a 64 bit machine, which works perfectly fine (assuming you have the needed 32 bit libraries installed).
For any distribution it is very convenient to provide only one set of images (configured for ix86), as these images will work both on 32 and 64 bit systems.
I consider it a major drawback if you intentionally prevent such use.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "I'm not a god, I was misquoted." - Lister, Red Dwarf
Quoted 7 lines · Wolfgang Denk
Id
SDK_ARCHINST_ARCHStatus
==============================================
1 ix86 ix86 works
2 ix86x86_64works
3x86_64ix86 cannot work
4x86_64x86_64works
Quoted 7 lines
The bug report is about case 3 - attempting to install a 64 bit SDK on a 32 bit machine. This indeed cannot work and shuld be prevented byy the installer.
But the current code also prevents case 2, installing 32 bit images on a 64 bit machine, which works perfectly fine (assuming you have the needed 32 bit libraries installed).
I see your point. Would you please file a bug on this?
Thanks,
Laurentiu
Dear Laurentiu,
Quoted 12 lines · In message <[email protected]> you wrote:
Quoted 12 lines
Id
SDK_ARCHINST_ARCHStatus
==============================================
1 ix86 ix86 works
2 ix86x86_64works
3x86_64ix86 cannot work
4x86_64x86_64worksThe bug report is about case 3 - attempting to install a 64 bit SDK on a 32 bit machine. This indeed cannot work and shuld be prevented byy the installer.
Quoted 5 lines
Quoted 3 lines
But the current code also prevents case 2, installing 32 bit images on a 64 bit machine, which works perfectly fine (assuming you have the needed 32 bit libraries installed).
I see your point. Would you please file a bug on this?
Done, with a patch included.
Please see https://bugzilla.yoctoproject.org/show_bug.cgi?id=3770
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Worlds are conquered, galaxies destroyed -- but a woman is always a woman. -- Kirk, "Conscience of the King", stardate unknown