Skip to contentSkip to conversation

ioapic-cleanups-for-v3.9

GIT PULL Joerg Roedel 2 participants 5 messages Jan 25, 2013 – Jan 29, 2013

lore
Share & tools
lore
#0 lore raw

Hi Ingo,

The following changes since commit 7d1f9aeff1ee4a20b1aeb377dd0f579fe9647619:

Linux 3.8-rc4 (2013-01-17 19:25:45 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git tags/ioapic-cleanups-for-v3.9

for you to fetch changes up to 91b7344672ed72355624415e036f117782c5809c:

x86, irq: Move irq_remapped out of x86 core code (2013-01-24 18:29:33 +0100)

----------------------------------------------------------------
Cleanup X86 IOAPIC code from interrupt remapping details

These patches move all interrupt remapping specific checks out of the x86 core code and replaces the respective call-sites with function pointers. As a result the interrupt remapping code is better abstraced from x86 core interrupt handling code.

The code was rebased to v3.8-rc4 and tested on systems with AMD-Vi and Intel VT-d (both capable of interrupt remapping). The systems were tested with IOMMU enabled and with IOMMU disabled. No issues were found.

----------------------------------------------------------------
Joerg Roedel (19):
x86, apic: Move irq_remapping_enabled checks into IRQ-remapping code x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume x86, io_apic: Introduce x86_io_apic_ops.disable()
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
x86, msi: Use IRQ remapping specific setup_msi_irqs routine x86, io_apic: Introduce set_affinity function pointer
x86, io_apic: Convert setup_ioapic_entry to function pointer x86, io_apic: Move irq_remapping_enabled checks out of check_timer() x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin x86, irq: Move irq_remapping_enabled declaration to iommu code x86, irq: Add data structure to keep AMD specific irq remapping information x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() x86, irq: Move irq_remapped() check into free_remapped_irq x86, irq: Introduce setup_remapped_irq()
x86, msi: Introduce x86_msi.compose_msi_msg call-back
x86, io_apic: Introduce eoi_ioapic_pin call-back
x86, irq: Move irq_remapped out of x86 core code

 arch/x86/include/asm/hpet.h          |    5 +-
 arch/x86/include/asm/hw_irq.h        |   13 +-
 arch/x86/include/asm/io_apic.h       |   28 +++
 arch/x86/include/asm/irq_remapping.h |   40 ++--
 arch/x86/include/asm/pci.h           |    2 +
 arch/x86/include/asm/x86_init.h      |   27 ++-
 arch/x86/kernel/apic/apic.c          |   28 ++-
 arch/x86/kernel/apic/io_apic.c       |  370 +++++++++++++---------------------
 arch/x86/kernel/hpet.c               |    2 +-
 arch/x86/kernel/x86_init.c           |   24 ++-
 drivers/iommu/amd_iommu.c            |    8 +-
 drivers/iommu/dmar.c                 |    2 +
 drivers/iommu/intel-iommu.c          |    2 +
 drivers/iommu/intel_irq_remapping.c  |   12 ++
 drivers/iommu/irq_remapping.c        |  176 +++++++++++++++-
 drivers/iommu/irq_remapping.h        |    1 +
 16 files changed, 439 insertions(+), 301 deletions(-)

Please pull.

Thanks,

Joerg

#1 lore raw
Quoted 9 lines · Joerg Roedel

Hi Ingo,

The following changes since commit 7d1f9aeff1ee4a20b1aeb377dd0f579fe9647619:

Linux 3.8-rc4 (2013-01-17 19:25:45 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git tags/ioapic-cleanups-for-v3.9

Hm, there are some not so trivial looking conflicts in io_apic.c, due to the MSI patches I applied yesterday:

5ca72c4f7c41 AHCI: Support multiple MSIs
08261d87f7d1 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() 51906e779f2b x86/MSI: Support multiple MSIs in presense of IRQ remapping

Could you please resolve them and resend?

Thanks,

Ingo

#2 lore raw
Quoted 8 lines · Ingo Molnar

Hm, there are some not so trivial looking conflicts in io_apic.c, due to the MSI patches I applied yesterday:

5ca72c4f7c41 AHCI: Support multiple MSIs
08261d87f7d1 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() 51906e779f2b x86/MSI: Support multiple MSIs in presense of IRQ remapping

Could you please resolve them and resend?

Will do. I rebase to tip/x86/apic and test again.

Joerg

#3 lore raw
In reply to Ingo Molnar

Hi Ingo,

Quoted 8 lines · Ingo Molnar

Hm, there are some not so trivial looking conflicts in io_apic.c, due to the MSI patches I applied yesterday:

5ca72c4f7c41 AHCI: Support multiple MSIs
08261d87f7d1 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() 51906e779f2b x86/MSI: Support multiple MSIs in presense of IRQ remapping

Could you please resolve them and resend?

Okay, I resolved the conflicts and tested the result again. Here it is:

The following changes since commit 5ca72c4f7c412c2002363218901eba5516c476b1:

AHCI: Support multiple MSIs (2013-01-24 17:25:13 +0100)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git tags/ioapic-cleanups-for-tip

for you to fetch changes up to a1bb20c232d066de0762f8e7cf332e5ce8385210:

x86, irq: Move irq_remapped out of x86 core code (2013-01-28 12:51:52 +0100)

----------------------------------------------------------------
Cleanup X86 IOAPIC code from interrupt remapping details

These patches move all interrupt remapping specific checks out of the x86 core code and replaces the respective call-sites with function pointers. As a result the interrupt remapping code is better abstraced from x86 core interrupt handling code.

The code was rebased to v3.8-rc4 and tested on systems with AMD-Vi and Intel VT-d (both capable of interrupt remapping). The systems were tested with IOMMU enabled and with IOMMU disabled. No issues were found.

----------------------------------------------------------------
Joerg Roedel (19):
x86, apic: Move irq_remapping_enabled checks into IRQ-remapping code x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume x86, io_apic: Introduce x86_io_apic_ops.disable()
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
x86, msi: Use IRQ remapping specific setup_msi_irqs routine x86, io_apic: Introduce set_affinity function pointer
x86, io_apic: Convert setup_ioapic_entry to function pointer x86, io_apic: Move irq_remapping_enabled checks out of check_timer() x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin x86, irq: Move irq_remapping_enabled declaration to iommu code x86, irq: Add data structure to keep AMD specific irq remapping information x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() x86, irq: Move irq_remapped() check into free_remapped_irq x86, irq: Introduce setup_remapped_irq()
x86, msi: Introduce x86_msi.compose_msi_msg call-back
x86, io_apic: Introduce eoi_ioapic_pin call-back
x86, irq: Move irq_remapped out of x86 core code

 arch/x86/include/asm/hpet.h          |    5 +-
 arch/x86/include/asm/hw_irq.h        |   13 +-
 arch/x86/include/asm/io_apic.h       |   28 +++
 arch/x86/include/asm/irq_remapping.h |   40 ++-
 arch/x86/include/asm/pci.h           |    3 +
 arch/x86/include/asm/x86_init.h      |   27 +-
 arch/x86/kernel/apic/apic.c          |   28 +--
 arch/x86/kernel/apic/io_apic.c       |  446 +++++++++++-----------------------
 arch/x86/kernel/hpet.c               |    2 +-
 arch/x86/kernel/x86_init.c           |   24 +-
 drivers/iommu/amd_iommu.c            |    8 +-
 drivers/iommu/dmar.c                 |    2 +
 drivers/iommu/intel-iommu.c          |    2 +
 drivers/iommu/intel_irq_remapping.c  |   12 +
 drivers/iommu/irq_remapping.c        |  231 +++++++++++++++++-
 drivers/iommu/irq_remapping.h        |    1 +
 include/linux/irq.h                  |    3 +
 17 files changed, 504 insertions(+), 371 deletions(-)

Please pull.

Thanks,

Joerg

#4 lore raw
Quoted 79 lines · Joerg Roedel

Hi Ingo,

Quoted 8 lines · Ingo Molnar

Hm, there are some not so trivial looking conflicts in io_apic.c, due to the MSI patches I applied yesterday:

5ca72c4f7c41 AHCI: Support multiple MSIs
08261d87f7d1 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() 51906e779f2b x86/MSI: Support multiple MSIs in presense of IRQ remapping

Could you please resolve them and resend?

Okay, I resolved the conflicts and tested the result again. Here it is:

The following changes since commit 5ca72c4f7c412c2002363218901eba5516c476b1:

AHCI: Support multiple MSIs (2013-01-24 17:25:13 +0100)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git tags/ioapic-cleanups-for-tip

for you to fetch changes up to a1bb20c232d066de0762f8e7cf332e5ce8385210:

x86, irq: Move irq_remapped out of x86 core code (2013-01-28 12:51:52 +0100)

----------------------------------------------------------------
Cleanup X86 IOAPIC code from interrupt remapping details

These patches move all interrupt remapping specific checks out of the x86 core code and replaces the respective call-sites with function pointers. As a result the interrupt remapping code is better abstraced from x86 core interrupt handling code.

The code was rebased to v3.8-rc4 and tested on systems with AMD-Vi and Intel VT-d (both capable of interrupt remapping). The systems were tested with IOMMU enabled and with IOMMU disabled. No issues were found.

----------------------------------------------------------------
Joerg Roedel (19):
x86, apic: Move irq_remapping_enabled checks into IRQ-remapping code x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume x86, io_apic: Introduce x86_io_apic_ops.disable()
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
x86, msi: Use IRQ remapping specific setup_msi_irqs routine x86, io_apic: Introduce set_affinity function pointer
x86, io_apic: Convert setup_ioapic_entry to function pointer x86, io_apic: Move irq_remapping_enabled checks out of check_timer() x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin x86, irq: Move irq_remapping_enabled declaration to iommu code x86, irq: Add data structure to keep AMD specific irq remapping information x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() x86, irq: Move irq_remapped() check into free_remapped_irq x86, irq: Introduce setup_remapped_irq()
x86, msi: Introduce x86_msi.compose_msi_msg call-back
x86, io_apic: Introduce eoi_ioapic_pin call-back
x86, irq: Move irq_remapped out of x86 core code

 arch/x86/include/asm/hpet.h          |    5 +-
 arch/x86/include/asm/hw_irq.h        |   13 +-
 arch/x86/include/asm/io_apic.h       |   28 +++
 arch/x86/include/asm/irq_remapping.h |   40 ++-
 arch/x86/include/asm/pci.h           |    3 +
 arch/x86/include/asm/x86_init.h      |   27 +-
 arch/x86/kernel/apic/apic.c          |   28 +--
 arch/x86/kernel/apic/io_apic.c       |  446 +++++++++++-----------------------
 arch/x86/kernel/hpet.c               |    2 +-
 arch/x86/kernel/x86_init.c           |   24 +-
 drivers/iommu/amd_iommu.c            |    8 +-
 drivers/iommu/dmar.c                 |    2 +
 drivers/iommu/intel-iommu.c          |    2 +
 drivers/iommu/intel_irq_remapping.c  |   12 +
 drivers/iommu/irq_remapping.c        |  231 +++++++++++++++++-
 drivers/iommu/irq_remapping.h        |    1 +
 include/linux/irq.h                  |    3 +
 17 files changed, 504 insertions(+), 371 deletions(-)
Quoted 1 line

Please pull.

Pulled, thanks Joerg!

Ingo