Skip to contentSkip to conversation

vexpress: detect the mapping based on the amba devices

PATCH New Jean-Christophe PLAGNIOL-VILLARD 1 participant 4 messages Feb 12, 2013

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

cover vexpress: detect the mapping based on the amba devices

HI,

so we can run on a9 on the non legacy hw

The following changes since commit 2d91386102612773074832d55e2ef11702fbb432:

arm: add vexpress board support (2013-02-12 05:53:04 +0800)

are available in the git repository at:

git://git.jcrosoft.org/barebox.git delivery/vexpress

for you to fetch changes up to 92b8828ad6b2b01248bd84888b8bbf920df85c31:

vexpress: detect the board periph mapping and detecting the sp804 mapping (2013-02-12 05:53:04 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (3):
amba: introduce amba_device_get_pid/cid
sp804: introduce amba_is_arm_sp804 to detect if the sp804 is present at the address
vexpress: detect the board periph mapping and detecting the sp804 mapping

 arch/arm/boards/vexpress/init.c               |   35 +++++++++++++++++++----------------
 arch/arm/boards/vexpress/lowlevel.c           |    4 +++-
 arch/arm/mach-vexpress/devices.c              |    4 ++--
 arch/arm/mach-vexpress/include/mach/devices.h |    6 +++---
 arch/arm/mach-vexpress/v2m.c                  |    2 +-
 drivers/amba/bus.c                            |   10 +++-------
 drivers/clocksource/amba-sp804.c              |    6 +++---
 include/linux/amba/bus.h                      |   28 ++++++++++++++++++++++++++++
 include/linux/amba/sp804.h                    |   30 ++++++++++++++++++++++++++++++
 9 files changed, 92 insertions(+), 33 deletions(-)
 create mode 100644 include/linux/amba/sp804.h

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#1 lore raw

PATCH 1/3 amba: introduce amba_device_get_pid/cid

so we can use it on vexpress to detect the hardware mapping

---
 drivers/amba/bus.c       |   10 +++-------
 include/linux/amba/bus.h |   28 ++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 7 deletions(-)
drivers/amba/bus.c +3 -7
index d1ab53c..65385be 100644
@@ -104,7 +104,7 @@ int amba_device_add(struct amba_device *dev)
 {
 	u32 size;
 	void __iomem *tmp;
-	int i, ret;
+	int ret;
 	struct resource *res = NULL;
 
 	dev->dev.bus = &amba_bustype;
@@ -135,12 +135,8 @@ int amba_device_add(struct amba_device *dev)
 		 * Read pid and cid based on size of resource
 		 * they are located at end of region
 		 */
-		for (pid = 0, i = 0; i < 4; i++)
-			pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
-				(i * 8);
-		for (cid = 0, i = 0; i < 4; i++)
-			cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
-				(i * 8);
+		pid = amba_device_get_pid(tmp, size);
+		cid = amba_device_get_cid(tmp, size);
 
 		if (cid == AMBA_CID)
 			dev->periphid = pid;
include/linux/amba/bus.h +28 -0
index cb3e3bd..a7bbae0 100644
@@ -150,4 +150,32 @@ struct amba_device name##_device = {				\
 	.periphid = id,						\
 }
 
+#include <io.h>
+/*
+ * Read pid and cid based on size of resource
+ * they are located at end of region
+ */
+static inline u32 amba_device_get_pid(void *base, u32 size)
+{
+	int i;
+	u32 pid;
+
+	for (pid = 0, i = 0; i < 4; i++)
+		pid |= (readl(base + size - 0x20 + 4 * i) & 255) <<
+			(i * 8);
+
+	return pid;
+}
+
+static inline u32 amba_device_get_cid(void *base, u32 size)
+{
+	int i;
+	u32 cid;
+
+	for (cid = 0, i = 0; i < 4; i++)
+		cid |= (readl(base + size - 0x10 + 4 * i) & 255) <<
+			(i * 8);
+
+	return cid;
+}
 #endif
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

PATCH 2/3 sp804: introduce amba_is_arm_sp804 to detect if the sp804 is present at the address

---
 drivers/clocksource/amba-sp804.c |    6 +++---
 include/linux/amba/sp804.h       |   30 ++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 3 deletions(-)
 create mode 100644 include/linux/amba/sp804.h
drivers/clocksource/amba-sp804.c +3 -3
index d9a30c2..fedcb64 100644
@@ -9,7 +9,7 @@
 #include <io.h>
 #include <driver.h>
 #include <errno.h>
-#include <linux/amba/bus.h>
+#include <linux/amba/sp804.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 
@@ -73,8 +73,8 @@ static int sp804_probe(struct amba_device *dev, const struct amba_id *id)
 
 static struct amba_id sp804_ids[] = {
 	{
-		.id	= 0x00141804,
-		.mask	= 0x00ffffff,
+		.id	= AMBA_ARM_SP804_ID,
+		.mask	= AMBA_ARM_SP804_ID_MASK,
 	},
 	{ 0, 0 },
 };
include/linux/amba/sp804.h new file +30 -0
new file mode 100644
index 0000000..aba550c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __AMBA_SP804_H__
+#define __AMBA_SP804_H__
+
+#include <linux/amba/bus.h>
+#include <sizes.h>
+
+#define AMBA_ARM_SP804_ID	0x00141804
+#define AMBA_ARM_SP804_ID_MASK	0x00ffffff
+
+static inline bool amba_is_arm_sp804(void __iomem *base)
+{
+	u32 pid, cid;
+	u32 size = SZ_4K;
+
+	cid = amba_device_get_cid(base, size);
+
+	if (cid != AMBA_CID)
+		return false;
+
+	pid = amba_device_get_pid(base, size);
+
+	return (pid & AMBA_ARM_SP804_ID_MASK) == AMBA_ARM_SP804_ID;
+}
+#endif /* __AMBA_SP804_H__ */
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw

PATCH 3/3 vexpress: detect the board periph mapping and detecting the sp804 mapping

In reply to Jean-Christophe PLAGNIOL-VILLARD

at 0x10011000 for a9 legacy otherwise at 0x1c110000

as the new board also support Cortex-A9

so this is working

qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash -nographic -cpu cortex-a9

---
 arch/arm/boards/vexpress/init.c               |   35 ++++++++++++++-----------
 arch/arm/boards/vexpress/lowlevel.c           |    4 ++-
 arch/arm/mach-vexpress/devices.c              |    4 +--
 arch/arm/mach-vexpress/include/mach/devices.h |    6 ++---
 arch/arm/mach-vexpress/v2m.c                  |    2 +-
 5 files changed, 28 insertions(+), 23 deletions(-)
arch/arm/boards/vexpress/init.c +19 -16
index f940824..2b2d085 100644
@@ -15,6 +15,7 @@
 #include <sizes.h>
 #include <io.h>
 #include <globalvar.h>
+#include <linux/amba/sp804.h>
 
 struct vexpress_init {
 	void (*core_init)(void);
@@ -57,12 +58,12 @@ struct vexpress_init vexpress_init_ax = {
 	.devices_init = vexpress_ax_devices_init,
 };
 
-static void vexpress_a9_mem_init(void)
+static void vexpress_a9_legacy_mem_init(void)
 {
-	vexpress_a9_add_ddram(SZ_512M, SZ_512M);
+	vexpress_a9_legacy_add_ddram(SZ_512M, SZ_512M);
 }
 
-static void vexpress_a9_devices_init(void)
+static void vexpress_a9_legacy_devices_init(void)
 {
 	add_cfi_flash_device(0, 0x40000000, SZ_64M, 0);
 	add_cfi_flash_device(1, 0x44000000, SZ_64M, 0);
@@ -73,20 +74,20 @@ static void vexpress_a9_devices_init(void)
 	armlinux_set_bootparams((void *)(0x60000100));
 }
 
-static void vexpress_a9_console_init(void)
+static void vexpress_a9_legacy_console_init(void)
 {
-	vexpress_a9_register_uart(0);
-	vexpress_a9_register_uart(1);
-	vexpress_a9_register_uart(2);
-	vexpress_a9_register_uart(3);
+	vexpress_a9_legacy_register_uart(0);
+	vexpress_a9_legacy_register_uart(1);
+	vexpress_a9_legacy_register_uart(2);
+	vexpress_a9_legacy_register_uart(3);
 }
 
-struct vexpress_init vexpress_init_a9 = {
-	.core_init = vexpress_a9_init,
-	.mem_init = vexpress_a9_mem_init,
-	.console_init = vexpress_a9_console_init,
-	.devices_init = vexpress_a9_devices_init,
-	.hostname = "vexpress-a9",
+struct vexpress_init vexpress_init_a9_legacy = {
+	.core_init = vexpress_a9_legacy_init,
+	.mem_init = vexpress_a9_legacy_mem_init,
+	.console_init = vexpress_a9_legacy_console_init,
+	.devices_init = vexpress_a9_legacy_devices_init,
+	.hostname = "vexpress-a9-legacy",
 };
 
 static int vexpress_mem_init(void)
@@ -123,14 +124,16 @@ console_initcall(vexpress_console_init);
 
 static int vexpress_core_init(void)
 {
-	if (cpu_is_cortex_a9()) {
-		v2m_init = &vexpress_init_a9;
+	if (amba_is_arm_sp804(IOMEM(0x10011000))) {
+		v2m_init = &vexpress_init_a9_legacy;
 	} else {
 		v2m_init = &vexpress_init_ax;
 		if (cpu_is_cortex_a5())
 			v2m_init->hostname = "vexpress-a5";
 		else if (cpu_is_cortex_a7())
 			v2m_init->hostname = "vexpress-a7";
+		else if (cpu_is_cortex_a9())
+			v2m_init->hostname = "vexpress-a9";
 		else if (cpu_is_cortex_a15())
 			v2m_init->hostname = "vexpress-a15";
 	}
arch/arm/boards/vexpress/lowlevel.c +3 -1
index 04ed84b..5b0c6b7 100644
@@ -9,11 +9,13 @@
 #include <asm/barebox-arm-head.h>
 #include <asm/barebox-arm.h>
 #include <asm/system_info.h>
+#include <linux/amba/sp804.h>
 
 void __naked reset(void)
 {
 	common_reset();
-	if (cpu_is_cortex_a9())
+
+	if (amba_is_arm_sp804(IOMEM(0x10011000)))
 		barebox_arm_entry(0x60000000, SZ_512M, 0);
 	else
 		barebox_arm_entry(0x80000000, SZ_512M, 0);
arch/arm/mach-vexpress/devices.c +2 -2
index 69c93ef..6ccce52 100644
@@ -12,7 +12,7 @@
 
 #include <mach/devices.h>
 
-void vexpress_a9_add_ddram(u32 ddr0_size, u32 ddr1_size)
+void vexpress_a9_legacy_add_ddram(u32 ddr0_size, u32 ddr1_size)
 {
 	arm_add_mem_device("ram0", 0x60000000, ddr0_size);
 
@@ -21,7 +21,7 @@ void vexpress_a9_add_ddram(u32 ddr0_size, u32 ddr1_size)
 }
 
 
-void vexpress_a9_register_uart(unsigned id)
+void vexpress_a9_legacy_register_uart(unsigned id)
 {
 	resource_size_t start;
 
arch/arm/mach-vexpress/include/mach/devices.h +3 -3
index adeada8..3146a47 100644
@@ -7,13 +7,13 @@
 #ifndef __ASM_ARCH_DEVICES_H__
 #define __ASM_ARCH_DEVICES_H__
 
-void vexpress_a9_add_ddram(u32 ddr0_size, u32 ddr1_size);
+void vexpress_a9_legacy_add_ddram(u32 ddr0_size, u32 ddr1_size);
 void vexpress_add_ddram(u32 size);
 
-void vexpress_a9_register_uart(unsigned id);
+void vexpress_a9_legacy_register_uart(unsigned id);
 void vexpress_register_uart(unsigned id);
 
-void vexpress_a9_init(void);
+void vexpress_a9_legacy_init(void);
 void vexpress_init(void);
 
 extern void *v2m_wdt_base;
arch/arm/mach-vexpress/v2m.c +1 -1
index 12d5d1a..d6dde83 100644
@@ -64,7 +64,7 @@ static void __init v2m_sp804_init(void __iomem *base)
 	amba_apb_device_add(NULL, "sp804", DEVICE_ID_SINGLE, (resource_size_t)base, 4096, NULL, 0);
 }
 
-void vexpress_a9_init(void)
+void vexpress_a9_legacy_init(void)
 {
 	v2m_wdt_base = IOMEM(0x1000f000);
 	v2m_sysreg_base = IOMEM(0x10001000);
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox