memory zone and slab
when does the memory zonelist initialized in kernel ?
what is the difference between zonelists and slab for memory manage .
are there some man docs or sites helpful to understand this ?
thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
The zonelists are initialized in 'build_all_zonelists()' called by 'start_kernel()'. But prior to that point there is allot of other code that determines the various zones and holes a key function is free_area_init_node(). But that function will also reference prior initialization in 'setup_arch()' which may take you all the way back to bootloader to kernel interface.
Nodes have zones, and zones define what the memory is appropriate for, DMA or lowmem, Normal memory or High memory for 32 bit. For 64 bit there are fewer zones just primarily 32 bit DMA and normal 64 bit. Zones are further divided into free areas of 2^n consecutive pages.
Slabs are typically pages carved up into smaller units of allocations.
There are several kernel books but outdated, but nevertheless good starting points, just search for 'Kernel Internals'
BR,
Mario.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of ishare
Sent: Thursday, March 07, 2013 3:35 PM
To: [email protected]
Subject: memory zone and slab
when does the memory zonelist initialized in kernel ?
what is the difference between zonelists and slab for memory manage .
are there some man docs or sites helpful to understand this ?
thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 14 lines · Mario Smarduch
The zonelists are initialized in '
build_all_zonelists()' called by 'start_kernel()'. But prior to that point there is allot of other code that determines the various zones and holes a key function isfree_area_init_node(). But that function will also reference prior initialization in 'setup_arch()' which may take you all the way back to bootloader
Nodes have zones, and zones define what the memory is appropriate for, DMA or lowmem, Normal memory or High memory for 32 bit. For 64 bit there are fewer zones just primarily 32 bit DMA and normal 64 bit. Zones are further divided into free areas of 2^n consecutive pages.
Quoted 2 lines
Slabs are typically pages carved up into smaller units of allocations.
Does this mean slab is based on zone ?
slab is just a optimized algorithm for normal allocator?
thanks!
Quoted 20 lines
There are several kernel books but outdated, but nevertheless good starting points, just search for 'Kernel Internals'
BR,
Mario.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of ishare
Sent: Thursday, March 07, 2013 3:35 PM
To: [email protected]
Subject: memory zone and slabwhen does the memory zonelist initialized in kernel ?
what is the difference between zonelists and slab for memory manage .
are there some man docs or sites helpful to understand this ?
Quoted 7 lines
thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Hi,
I'm not sure I understand your question.
The slab allocator groups objects into "caches".
Each cache contains objects of the _same_ type.
The area of memory that contains the cache is divided into "slabs" and each slab consists of one or more contiguous _pages_. If a page belongs to a slab it has the "PG_slab" page->flags bit set (see include/linux/page-flags.h).
Pages tend to belong to a particular zone.
I hope this helps.
Kind regards,
Aaron
Quoted 54 lines · ishare
Quoted 14 lines · Mario Smarduch
The zonelists are initialized in '
build_all_zonelists()' called by 'start_kernel()'. But prior to that point there is allot of other code that determines the various zones and holes a key function isfree_area_init_node(). But that function will also reference prior initialization in 'setup_arch()' which may take you all the way back to bootloader
Nodes have zones, and zones define what the memory is appropriate for, DMA or lowmem, Normal memory or High memory for 32 bit. For 64 bit there are fewer zones just primarily 32 bit DMA and normal 64 bit. Zones are further divided into free areas of 2^n consecutive pages.Quoted 2 lines
Slabs are typically pages carved up into smaller units of allocations.
Does this mean slab is based on zone ?
slab is just a optimized algorithm for normal allocator?thanks!
Quoted 20 lines
There are several kernel books but outdated, but nevertheless good starting points, just search for 'Kernel Internals'
BR,
Mario.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of ishare
Sent: Thursday, March 07, 2013 3:35 PM
To: [email protected]
Subject: memory zone and slabwhen does the memory zonelist initialized in kernel ?
what is the difference between zonelists and slab for memory manage .
are there some man docs or sites helpful to understand this ?
Quoted 7 lines
thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
what is the relationship between NUMA and slab memory-manage algorithm?
thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs