Skip to contentSkip to conversation

Black screen with nouveau in 3.8.x (regression)

DISCUSSION Nick Bowler 1 participant 3 messages Mar 7, 2013 – Mar 25, 2013

lore
Share & tools
lore
#0 lore raw

Hi folks,

Yesterday I upgraded one of my machines to 3.8.2 from 3.6.6. This machine has an old NV36 AGP board. With the new kernel, as soon as nouveau takes over the console the display connected via DVI goes dark (the monitor goes into standby mode). The display connected via VGA continues to work fine.

Starting Xorg does not correct the problem. Nouveau seems to know that the display is connected:

% cat /sys/class/drm/card0-DVI-I-1/status
connected

I don't see anything unusual in the log either (full log attached):

% dmesg -t | grep -iE 'drm|nouveau'
[drm] Initialized drm 1.1.0 20060810

  nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x436200a1
  nouveau  [  DEVICE][0000:01:00.0] Chipset: NV36 (NV36)
  nouveau  [  DEVICE][0000:01:00.0] Family : NV30
  nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
  nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
  nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
  nouveau  [   VBIOS][0000:01:00.0] BMP version 5.28
  nouveau  [   VBIOS][0000:01:00.0] version 04.36.20.21
  nouveau W[  PTIMER][0000:01:00.0] unknown input clock freq
  nouveau  [     PFB][0000:01:00.0] RAM type: DDR1
  nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
  nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
  nouveau  [     DRM] VRAM: 255 MiB
  nouveau  [     DRM] GART: 64 MiB
  nouveau  [     DRM] BMP BIOS found
  nouveau  [     DRM] BMP version 5.40
  nouveau  [     DRM] Bios version 04.36.20.21
  nouveau  [     DRM] DCB version 2.2
  nouveau  [     DRM] DCB outp 00: 01000300 00009c40
  nouveau  [     DRM] DCB outp 01: 02010310 00009c40
  nouveau  [     DRM] DCB outp 02: 04000302 00000000
  nouveau  [     DRM] DCB outp 03: 02020321 00000303
  nouveau  [     DRM] Loading NV17 power sequencing microcode
  nouveau  [     DRM] Saving VGA fonts
  [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  [drm] No driver support for vblank timestamp query.
  nouveau  [     DRM] 0xE51A: Parsing digital output script table
  nouveau  [     DRM] 0 available performance level(s)
  nouveau  [     DRM] c: core 425MHz memory 501MHz voltage 1350mV
  nouveau  [     DRM] MM: using M2MF for buffer copies
  nouveau  [     DRM] Setting dpms mode 3 on vga encoder (output 0)
  nouveau  [     DRM] Setting dpms mode 3 on vga encoder (output 1)
  nouveau  [     DRM] Setting dpms mode 3 on tmds encoder (output 2)
  nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
  nouveau  [     DRM] allocated 1280x1024 fb: 0x9000, bo ffff88007b6ae000
  fbcon: nouveaufb (fb0) is primary device
  nouveau  [     DRM] 0xE51A: Parsing digital output script table
  nouveau  [     DRM] Setting dpms mode 0 on tmds encoder (output 2)
  nouveau  [     DRM] Output DVI-I-1 is running on CRTC 0 using output C
  nouveau  [     DRM] Setting dpms mode 0 on vga encoder (output 1)
  nouveau  [     DRM] Output VGA-1 is running on CRTC 1 using output B

fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0

I started a bisection... here's the first steps so far. I will try to finish the procedure over the next couple days but I'm reporting this now in case someone needs me to get some other info.

git bisect start 'drivers/gpu/drm'
# good: [3820288942d1c1524c3ee85cbf503fee1533cfc3] Linux 3.6.6
git bisect good 3820288942d1c1524c3ee85cbf503fee1533cfc3
# bad: [19b00d2dc9bedf0856e366cb7b9c7733ded659e4] Linux 3.8.2
git bisect bad 19b00d2dc9bedf0856e366cb7b9c7733ded659e4
# good: [a0d271cbfed1dd50278c6b06bead3d00ba0a88f9] Linux 3.6
git bisect good a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
# bad: [daed2dbb7ea4d179e472396ce46377fe758d5faf] drm/i915: use the CPU and PCH transcoders on lpt_pch_enable
git bisect bad daed2dbb7ea4d179e472396ce46377fe758d5faf
# good: [df86b5765a48d5f557489577652bd6df145b0e1b] drm/savage: re-add busmaster enable, regression fix
git bisect good df86b5765a48d5f557489577652bd6df145b0e1b
# bad: [39df01cd6ce9f6dd755ace0030e2bebe75da7727] Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes git bisect bad 39df01cd6ce9f6dd755ace0030e2bebe75da7727

Thanks,

Signature · 1 line
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
#1 lore raw
Quoted 3 lines · Nick Bowler

I started a bisection... here's the first steps so far. I will try to finish the procedure over the next couple days but I'm reporting this now in case someone needs me to get some other info.

I carried this on a bit further, but it seems that most of the remaining commits bisect wants to test do not compile, so there is a huge number of skipped commits. Not exactly a lot of fun...

git bisect start 'drivers/gpu/drm'
# good: [3820288942d1c1524c3ee85cbf503fee1533cfc3] Linux 3.6.6
git bisect good 3820288942d1c1524c3ee85cbf503fee1533cfc3
# bad: [19b00d2dc9bedf0856e366cb7b9c7733ded659e4] Linux 3.8.2
git bisect bad 19b00d2dc9bedf0856e366cb7b9c7733ded659e4
# good: [a0d271cbfed1dd50278c6b06bead3d00ba0a88f9] Linux 3.6
git bisect good a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
# bad: [daed2dbb7ea4d179e472396ce46377fe758d5faf] drm/i915: use the CPU and PCH transcoders on lpt_pch_enable
git bisect bad daed2dbb7ea4d179e472396ce46377fe758d5faf
# good: [df86b5765a48d5f557489577652bd6df145b0e1b] drm/savage: re-add busmaster enable, regression fix
git bisect good df86b5765a48d5f557489577652bd6df145b0e1b
# bad: [39df01cd6ce9f6dd755ace0030e2bebe75da7727] Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes git bisect bad 39df01cd6ce9f6dd755ace0030e2bebe75da7727
# bad: [b9f10852fcb1f09369d931dcbfbaad89ad1da4ad] drm/nv98/crypt: fix fuc build with latest envyas
git bisect bad b9f10852fcb1f09369d931dcbfbaad89ad1da4ad
# bad: [b10f20d590aa040e4028c04a70a27b9ad6650ba8] drm/nvc0-/gr: remove reset-after-grctx-construction hack
git bisect bad b10f20d590aa040e4028c04a70a27b9ad6650ba8
# skip: [18c9b959fd8ea6f3602efbedad788f53e305e6f1] drm/nouveau/gpuobj: create wrapper functions for mapping gpuobj into vm/bar git bisect skip 18c9b959fd8ea6f3602efbedad788f53e305e6f1
# skip: [092599da308bf56b96c849ecdd315b8a1a13ca52] drm/nv50/instmem: remove use of nouveau_gpuobj_new_fake()
git bisect skip 092599da308bf56b96c849ecdd315b8a1a13ca52
# skip: [4196faa8623264b79279a06fd186654c959f2767] drm/nouveau/i2c: port to subdev interfaces
git bisect skip 4196faa8623264b79279a06fd186654c959f2767
# skip: [9da226f698c01b268b9172050df4150f269a7613] drm/nvc0/fifo: handle bar1 control regs much like fifo/nve0
git bisect skip 9da226f698c01b268b9172050df4150f269a7613
# skip: [8aceb7de47ea2491abc1a577dc875b19e9947a54] drm/nouveau/clk: implement stub clock subdev
git bisect skip 8aceb7de47ea2491abc1a577dc875b19e9947a54
# skip: [70ee6f1cd6911098ddd4c11ee21b69dbe51fb3f9] drm/nv04-nv40/fifo: remove use of nouveau_gpuobj_new_fake()
git bisect skip 70ee6f1cd6911098ddd4c11ee21b69dbe51fb3f9
# skip: [f589be88caf32501a734e531180d5df5d6089ef3] drm/nouveau/pageflip: kick flip handling out of engsw and into fence git bisect skip f589be88caf32501a734e531180d5df5d6089ef3
# skip: [73a60c0d218a292f8ef29d3467726ff26ed366fc] drm/nouveau/gpuobj: remove flags for vm-mappings
git bisect skip 73a60c0d218a292f8ef29d3467726ff26ed366fc
# skip: [70790f4f819875e8f390871fd15bbbf823f28e1b] drm/nouveau/clock: pull in the implementation from all over the place git bisect skip 70790f4f819875e8f390871fd15bbbf823f28e1b
# skip: [5787640db6ae722aeadb394d480c7ca21b603e34] drm/nv04-nv40/instmem: remove use of nouveau_gpuobj_new_fake() git bisect skip 5787640db6ae722aeadb394d480c7ca21b603e34
# skip: [cb75d97e9c77743ecfcc43375be135a55a4d9b25] drm/nouveau: implement devinit subdev, and new init table parser git bisect skip cb75d97e9c77743ecfcc43375be135a55a4d9b25
# skip: [8a9b889e668a5bc2f4031015fe4893005c43403d] drm/nouveau: remove last use of nouveau_gpuobj_new_fake()
git bisect skip 8a9b889e668a5bc2f4031015fe4893005c43403d
# skip: [a73c5c526a8a39b2e61709c753d44be597c9a4c0] drm/nvc0-nve0/graph: rename dev to priv, no code changes
git bisect skip a73c5c526a8a39b2e61709c753d44be597c9a4c0
# good: [d6ba6d215a538a58f0f0026f0961b0b9125e8042] drm/nvc0/fence: restore pre-suspend fence buffer context on resume git bisect good d6ba6d215a538a58f0f0026f0961b0b9125e8042
# skip: [7d9115dee978e8540734c456c925d71a37752b8d] drm/nouveau/mc: port to subdev interfaces
git bisect skip 7d9115dee978e8540734c456c925d71a37752b8d
# good: [3a92d37e4099054fe187b485a9d27c439c10eca7] drm/nouveau/gem: use bo.offset rather than mm_node.start
git bisect good 3a92d37e4099054fe187b485a9d27c439c10eca7
# skip: [5a5c7432bbbd2e318dff107b4ff960ab543a7cef] drm/nouveau/timer: port to subdev interfaces
git bisect skip 5a5c7432bbbd2e318dff107b4ff960ab543a7cef
# bad: [77145f1cbdf8d28b46ff8070ca749bad821e0774] drm/nouveau: port remainder of drm code, and rip out compat layer git bisect bad 77145f1cbdf8d28b46ff8070ca749bad821e0774
# skip: [51a3d3425663698a79e8a9d01998a8a32ddee13b] drm/nouveau/backlight: remove dependence on nouveau_drv.h
git bisect skip 51a3d3425663698a79e8a9d01998a8a32ddee13b

Cheers,

Signature · 1 line
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
#2 lore raw
In reply to Nick Bowler

Ping?

Quoted 64 lines · Nick Bowler

Yesterday I upgraded one of my machines to 3.8.2 from 3.6.6. This machine has an old NV36 AGP board. With the new kernel, as soon as nouveau takes over the console the display connected via DVI goes dark (the monitor goes into standby mode). The display connected via VGA continues to work fine.

Starting Xorg does not correct the problem. Nouveau seems to know that the display is connected:

% cat /sys/class/drm/card0-DVI-I-1/status
connected

I don't see anything unusual in the log either (full log attached):

% dmesg -t | grep -iE 'drm|nouveau'
[drm] Initialized drm 1.1.0 20060810

  nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x436200a1
  nouveau  [  DEVICE][0000:01:00.0] Chipset: NV36 (NV36)
  nouveau  [  DEVICE][0000:01:00.0] Family : NV30
  nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
  nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
  nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
  nouveau  [   VBIOS][0000:01:00.0] BMP version 5.28
  nouveau  [   VBIOS][0000:01:00.0] version 04.36.20.21
  nouveau W[  PTIMER][0000:01:00.0] unknown input clock freq
  nouveau  [     PFB][0000:01:00.0] RAM type: DDR1
  nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
  nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
  nouveau  [     DRM] VRAM: 255 MiB
  nouveau  [     DRM] GART: 64 MiB
  nouveau  [     DRM] BMP BIOS found
  nouveau  [     DRM] BMP version 5.40
  nouveau  [     DRM] Bios version 04.36.20.21
  nouveau  [     DRM] DCB version 2.2
  nouveau  [     DRM] DCB outp 00: 01000300 00009c40
  nouveau  [     DRM] DCB outp 01: 02010310 00009c40
  nouveau  [     DRM] DCB outp 02: 04000302 00000000
  nouveau  [     DRM] DCB outp 03: 02020321 00000303
  nouveau  [     DRM] Loading NV17 power sequencing microcode
  nouveau  [     DRM] Saving VGA fonts
  [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  [drm] No driver support for vblank timestamp query.
  nouveau  [     DRM] 0xE51A: Parsing digital output script table
  nouveau  [     DRM] 0 available performance level(s)
  nouveau  [     DRM] c: core 425MHz memory 501MHz voltage 1350mV
  nouveau  [     DRM] MM: using M2MF for buffer copies
  nouveau  [     DRM] Setting dpms mode 3 on vga encoder (output 0)
  nouveau  [     DRM] Setting dpms mode 3 on vga encoder (output 1)
  nouveau  [     DRM] Setting dpms mode 3 on tmds encoder (output 2)
  nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
  nouveau  [     DRM] allocated 1280x1024 fb: 0x9000, bo ffff88007b6ae000
  fbcon: nouveaufb (fb0) is primary device
  nouveau  [     DRM] 0xE51A: Parsing digital output script table
  nouveau  [     DRM] Setting dpms mode 0 on tmds encoder (output 2)
  nouveau  [     DRM] Output DVI-I-1 is running on CRTC 0 using output C
  nouveau  [     DRM] Setting dpms mode 0 on vga encoder (output 1)
  nouveau  [     DRM] Output VGA-1 is running on CRTC 1 using output B

fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0

I started a bisection... here's the first steps so far. I will try to finish the procedure over the next couple days but I'm reporting this now in case someone needs me to get some other info.

[...]

Quoted 51 lines · Nick Bowler

I carried this on a bit further, but it seems that most of the remaining commits bisect wants to test do not compile, so there is a huge number of skipped commits. Not exactly a lot of fun...

git bisect start 'drivers/gpu/drm'
# good: [3820288942d1c1524c3ee85cbf503fee1533cfc3] Linux 3.6.6
git bisect good 3820288942d1c1524c3ee85cbf503fee1533cfc3
# bad: [19b00d2dc9bedf0856e366cb7b9c7733ded659e4] Linux 3.8.2
git bisect bad 19b00d2dc9bedf0856e366cb7b9c7733ded659e4
# good: [a0d271cbfed1dd50278c6b06bead3d00ba0a88f9] Linux 3.6
git bisect good a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
# bad: [daed2dbb7ea4d179e472396ce46377fe758d5faf] drm/i915: use the CPU and PCH transcoders on lpt_pch_enable
git bisect bad daed2dbb7ea4d179e472396ce46377fe758d5faf
# good: [df86b5765a48d5f557489577652bd6df145b0e1b] drm/savage: re-add busmaster enable, regression fix
git bisect good df86b5765a48d5f557489577652bd6df145b0e1b
# bad: [39df01cd6ce9f6dd755ace0030e2bebe75da7727] Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes git bisect bad 39df01cd6ce9f6dd755ace0030e2bebe75da7727
# bad: [b9f10852fcb1f09369d931dcbfbaad89ad1da4ad] drm/nv98/crypt: fix fuc build with latest envyas
git bisect bad b9f10852fcb1f09369d931dcbfbaad89ad1da4ad
# bad: [b10f20d590aa040e4028c04a70a27b9ad6650ba8] drm/nvc0-/gr: remove reset-after-grctx-construction hack
git bisect bad b10f20d590aa040e4028c04a70a27b9ad6650ba8
# skip: [18c9b959fd8ea6f3602efbedad788f53e305e6f1] drm/nouveau/gpuobj: create wrapper functions for mapping gpuobj into vm/bar git bisect skip 18c9b959fd8ea6f3602efbedad788f53e305e6f1
# skip: [092599da308bf56b96c849ecdd315b8a1a13ca52] drm/nv50/instmem: remove use of nouveau_gpuobj_new_fake()
git bisect skip 092599da308bf56b96c849ecdd315b8a1a13ca52
# skip: [4196faa8623264b79279a06fd186654c959f2767] drm/nouveau/i2c: port to subdev interfaces
git bisect skip 4196faa8623264b79279a06fd186654c959f2767
# skip: [9da226f698c01b268b9172050df4150f269a7613] drm/nvc0/fifo: handle bar1 control regs much like fifo/nve0
git bisect skip 9da226f698c01b268b9172050df4150f269a7613
# skip: [8aceb7de47ea2491abc1a577dc875b19e9947a54] drm/nouveau/clk: implement stub clock subdev
git bisect skip 8aceb7de47ea2491abc1a577dc875b19e9947a54
# skip: [70ee6f1cd6911098ddd4c11ee21b69dbe51fb3f9] drm/nv04-nv40/fifo: remove use of nouveau_gpuobj_new_fake()
git bisect skip 70ee6f1cd6911098ddd4c11ee21b69dbe51fb3f9
# skip: [f589be88caf32501a734e531180d5df5d6089ef3] drm/nouveau/pageflip: kick flip handling out of engsw and into fence git bisect skip f589be88caf32501a734e531180d5df5d6089ef3
# skip: [73a60c0d218a292f8ef29d3467726ff26ed366fc] drm/nouveau/gpuobj: remove flags for vm-mappings
git bisect skip 73a60c0d218a292f8ef29d3467726ff26ed366fc
# skip: [70790f4f819875e8f390871fd15bbbf823f28e1b] drm/nouveau/clock: pull in the implementation from all over the place git bisect skip 70790f4f819875e8f390871fd15bbbf823f28e1b
# skip: [5787640db6ae722aeadb394d480c7ca21b603e34] drm/nv04-nv40/instmem: remove use of nouveau_gpuobj_new_fake() git bisect skip 5787640db6ae722aeadb394d480c7ca21b603e34
# skip: [cb75d97e9c77743ecfcc43375be135a55a4d9b25] drm/nouveau: implement devinit subdev, and new init table parser git bisect skip cb75d97e9c77743ecfcc43375be135a55a4d9b25
# skip: [8a9b889e668a5bc2f4031015fe4893005c43403d] drm/nouveau: remove last use of nouveau_gpuobj_new_fake()
git bisect skip 8a9b889e668a5bc2f4031015fe4893005c43403d
# skip: [a73c5c526a8a39b2e61709c753d44be597c9a4c0] drm/nvc0-nve0/graph: rename dev to priv, no code changes
git bisect skip a73c5c526a8a39b2e61709c753d44be597c9a4c0
# good: [d6ba6d215a538a58f0f0026f0961b0b9125e8042] drm/nvc0/fence: restore pre-suspend fence buffer context on resume git bisect good d6ba6d215a538a58f0f0026f0961b0b9125e8042
# skip: [7d9115dee978e8540734c456c925d71a37752b8d] drm/nouveau/mc: port to subdev interfaces
git bisect skip 7d9115dee978e8540734c456c925d71a37752b8d

Quoted 8 lines

# good: [3a92d37e4099054fe187b485a9d27c439c10eca7] drm/nouveau/gem: use bo.offset rather than mm_node.start git bisect good 3a92d37e4099054fe187b485a9d27c439c10eca7
# skip: [5a5c7432bbbd2e318dff107b4ff960ab543a7cef] drm/nouveau/timer: port to subdev interfaces git bisect skip 5a5c7432bbbd2e318dff107b4ff960ab543a7cef
# bad: [77145f1cbdf8d28b46ff8070ca749bad821e0774] drm/nouveau: port remainder of drm code, and rip out compat layer git bisect bad 77145f1cbdf8d28b46ff8070ca749bad821e0774
# skip: [51a3d3425663698a79e8a9d01998a8a32ddee13b] drm/nouveau/backlight: remove dependence on nouveau_drv.h git bisect skip 51a3d3425663698a79e8a9d01998a8a32ddee13b

Thanks,

Signature · 1 line
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)