Correcting ext4write syntax
Hey all,
We have a problem with the syntax of 'ext4write'. For fatload, fatwrite, ext2load and ext4load the format is:
command interface device:part system-memory-addr filename But ext4write is:
command interface device:part filename system-memory-addr
Crap. This has been the published interface since May 2012, so 3 releases going on a fourth.
I guess we've got two options:
1) Break and correct the order.
2) Correct the order, add a silent fixup if filename and address are backwards and note we'll remove that in a few releases.
Thoughts?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130313/44e3c58c/attachment.pgp>
Dear Tom,
Quoted 7 lines · In message <20130313145638.GK23324@bill-the-cat> you wrote:
We have a problem with the syntax of 'ext4write'. For fatload, fatwrite, ext2load and ext4load the format is:
command interface device:part system-memory-addr filename But ext4write is:
command interface device:part filename system-memory-addr
Quoted 7 lines
Crap. This has been the published interface since May 2012, so 3 releases going on a fourth.
I guess we've got two options:
1) Break and correct the order.
2) Correct the order, add a silent fixup if filename and address are backwards and note we'll remove that in a few releases.
My vote is for 1) [accompanid by a big, fat note in the release message].
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Of all the things I've lost, I miss my mind the most.