Skip to contentSkip to conversation

ARM: shmobile: r8a73a4 APE6EVM board support

PATCH New Magnus Damm 2 participants 5 messages Mar 29, 2013 – Apr 2, 2013

Subsystems (6)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH v3 1/3 ARM: shmobile: APE6EVM base support

In reply to Magnus Damm

From: Magnus Damm <[email protected]>

V3 of APE6EVM base board support making use of
1 GiB of memory, the SCIFA0 serial port and
ARM architected timer.

---

Changes since V2:
- Use 64-bit DT addresses

Changes since V1:
- Sorted headers
- Use ape6evm_add_standard_devices() to setup SoC devices and clocks

 arch/arm/boot/dts/Makefile             |    1 
 arch/arm/boot/dts/r8a73a4-ape6evm.dts  |   31 +++++++++++++++++++++
 arch/arm/mach-shmobile/Kconfig         |    8 ++++-
 arch/arm/mach-shmobile/Makefile        |    1 
 arch/arm/mach-shmobile/board-ape6evm.c |   46 ++++++++++++++++++++++++++++++++
 5 files changed, 86 insertions(+), 1 deletion(-)
arch/arm/boot/dts/Makefile +1 -0
@@ -140,6 +140,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
 	r8a7779-marzen-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
+	r8a73a4-ape6evm.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
 	socfpga_vt.dtb
arch/arm/boot/dts/r8a73a4-ape6evm.dts new file +31 -0
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm", "renesas,r8a73a4";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
arch/arm/mach-shmobile/Kconfig +7 -1
@@ -87,6 +87,11 @@ config MACH_AG5EVM
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SH_LCD_MIPI_DSI
 
+config MACH_APE6EVM
+	bool "APE6EVM board"
+	depends on ARCH_R8A73A4
+	select USE_OF
+
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
@@ -180,7 +185,7 @@ config MEMORY_START
 	hex "Physical memory start address"
 	default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
 				MACH_MACKEREL || MACH_BONITO || \
-				MACH_ARMADILLO800EVA
+				MACH_ARMADILLO800EVA || MACH_APE6EVM
 	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
@@ -190,6 +195,7 @@ config MEMORY_START
 
 config MEMORY_SIZE
 	hex "Physical memory size"
+	default "0x40000000" if MACH_APE6EVM
 	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
arch/arm/mach-shmobile/Makefile +1 -0
@@ -36,6 +36,7 @@ obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 # Board objects
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
+obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
arch/arm/mach-shmobile/board-ape6evm.c new file +46 -0

46 lines not on this page · raw message

author maintainer
#2 lore raw

PATCH v2 2/3 ARM: shmobile: APE6EVM PFC support

In reply to Magnus Damm

From: Magnus Damm <[email protected]>

Start using the r8a73a4 PFC on the APE6EVM board
and configure the SCIFA0 console signals in the
PFC via PINCTRL.

---

Changes since V1:
- Use PINCTRL instead of function GPIOs

 arch/arm/mach-shmobile/board-ape6evm.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/mach-shmobile/board-ape6evm.c +10 -0
@@ -21,15 +21,25 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static const struct pinctrl_map ape6evm_pinctrl_map[] = {
+	/* SCIFA0 console */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
+				  "scifa0_data", "scifa0"),
+};
+
 static void __init ape6evm_add_standard_devices(void)
 {
 	r8a73a4_clock_init();
+	pinctrl_register_mappings(ape6evm_pinctrl_map,
+				  ARRAY_SIZE(ape6evm_pinctrl_map));
+	r8a73a4_pinmux_init();
 	r8a73a4_add_standard_devices();
 }
 
author maintainer
#3 lore raw

PATCH v3 3/3 ARM: shmobile: APE6EVM LAN9220 support

In reply to Magnus Damm

From: Magnus Damm <[email protected]>

Add LAN9220 support to the APE6EVM board using C and DT. At this point the PFC driver lacks DT bindings so to configure the PFC we use PINCTRL in C board code.

---

Changes since V2:
- Put SMSC chip in case of DT inside 32-bit lbsc

Changes since V1:
- Use PINCTRL instead of function GPIOs.
- Modify bootargs to enable DHCP and NFS root.

 arch/arm/boot/dts/r8a73a4-ape6evm.dts  |   23 ++++++++++++++++++-
 arch/arm/mach-shmobile/board-ape6evm.c |   38 ++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a73a4-ape6evm.dts +22 -1
@@ -16,7 +16,7 @@
 	compatible = "renesas,ape6evm", "renesas,r8a73a4";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel";
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {
@@ -24,8 +24,29 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	ape6evm_fixed_3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		ethernet@8000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x08000000 0x1000>;
+			interrupt-parent = <&irqc1>;
+			interrupts = <8 0x4>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&ape6evm_fixed_3v3>;
+			vddvario-supply = <&ape6evm_fixed_3v3>;
+		};
 	};
 };
arch/arm/mach-shmobile/board-ape6evm.c +38 -0
@@ -18,20 +18,49 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/* SMSC LAN9220 */
+static const struct resource lan9220_res[] = {
+	DEFINE_RES_MEM(0x08000000, 0x1000),
+	{
+		.start	= irq_pin(40), /* IRQ40 */
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static const struct smsc911x_platform_config lan9220_data = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+};
+
 static const struct pinctrl_map ape6evm_pinctrl_map[] = {
 	/* SCIFA0 console */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
 				  "scifa0_data", "scifa0"),
+	/* SMSC */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
+				  "irqc_irq40", "irqc"),
 };
 
 static void __init ape6evm_add_standard_devices(void)
@@ -41,6 +70,15 @@ static void __init ape6evm_add_standard_
 				  ARRAY_SIZE(ape6evm_pinctrl_map));
 	r8a73a4_pinmux_init();
 	r8a73a4_add_standard_devices();
+
+	/* LAN9220 ethernet */
+	gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	platform_device_register_resndata(&platform_bus, "smsc911x", -1,
+					  lan9220_res, ARRAY_SIZE(lan9220_res),
+					  &lan9220_data, sizeof(lan9220_data));
 }
 
 static const char *ape6evm_boards_compat_dt[] __initdata = {

Magnus Damm

author maintainer
#0 lore raw

v4 cover ARM: shmobile: r8a73a4 APE6EVM board support

ARM: shmobile: r8a73a4 APE6EVM board support (V4)

[PATCH 01/03 v3] ARM: shmobile: APE6EVM base support [PATCH 02/03 v2] ARM: shmobile: APE6EVM PFC support [PATCH 03/03 v3] ARM: shmobile: APE6EVM LAN9220 support

This series is V4 of initial support for the APE6EVM board.

The APE6EVM board makes use of the r8a73a4 SoC and has a couple of different I/O devices on board, but with this series only support for the SCIFA0 UART and the Ethernet chip is included.

In the future support for more I/O devices will be added as incremental feature patches.

Changes since V3:
- Make use of 64-bit DT addresses

Changes since V2:
- Use PINCTRL instead of function GPIOs.
- Modify bootargs to enable DHCP and NFS root.
- Now depends on r8a73a4 PFC V2

Changes since V1:
- Went from single patch to series
- Use ape6evm_add_standard_devices() to setup SoC devices and clocks
- Use PFC to configure SCIFA0
- Add Ethernet support including PFC support

For more details please see the individual patches.

---

Written against renesas-next-20130329 in renesas.git

Depends on the following patch:
[PATCH] ARM: shmobile: r8a73a4 SoC 64-bit DT support

 arch/arm/boot/dts/Makefile             |    1 
 arch/arm/boot/dts/r8a73a4-ape6evm.dts  |   54 ++++++++++++++++++
 arch/arm/mach-shmobile/Kconfig         |    8 ++
 arch/arm/mach-shmobile/Makefile        |    1 
 arch/arm/mach-shmobile/board-ape6evm.c |   94 ++++++++++++++++++++++++++++++++
 5 files changed, 156 insertions(+), 2 deletions(-)
#4 lore raw

v4 cover ARM: shmobile: r8a73a4 APE6EVM board support

Quoted 8 lines · Magnus Damm

ARM: shmobile: r8a73a4 APE6EVM board support (V4)

[PATCH 01/03 v3] ARM: shmobile: APE6EVM base support [PATCH 02/03 v2] ARM: shmobile: APE6EVM PFC support [PATCH 03/03 v3] ARM: shmobile: APE6EVM LAN9220 support

This series is V4 of initial support for the APE6EVM board.

Quoted 7 lines

The APE6EVM board makes use of the r8a73a4 SoC and has a couple of different I/O devices on board, but with this series only support for the SCIFA0 UART and the Ethernet chip is included.

In the future support for more I/O devices will be added as incremental feature patches.

Thanks, queued up for v3.10 in the boards branch.