Skip to contentSkip to conversation

gma500: Make VGA and HDMI connector hotpluggable

PATCH In review Kero 2 participants 7 messages Mar 31, 2013 – Apr 17, 2013

Subsystems (3)
lore
Share & tools
lore

Kero

author
#0 lore raw

PATCH 1/1 gma500: Make VGA and HDMI connector hotpluggable

From: Kero van Gelder <[email protected]>

Both VGA and HDMI connectors are available on my Asus EeePC X101CH. This patch will cause output to be shown on either when plugged in. For both, it shows the leftmost 800x600, of the 1024x600 on LVDS.

---

drivers/gpu/drm/gma500/cdv_intel_crt.c +1 -0
index 8c17534..7b8386f 100644
@@ -276,6 +276,7 @@ void cdv_intel_crt_init(struct drm_device *dev,
                goto failed_connector;
 
        connector = &psb_intel_connector->base;
+       connector->polled = DRM_CONNECTOR_POLL_HPD;
        drm_connector_init(dev, connector,
                &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
drivers/gpu/drm/gma500/cdv_intel_hdmi.c +1 -0
index e223b50..464153d 100644
@@ -319,6 +319,7 @@ void cdv_hdmi_init(struct drm_device *dev,
                goto err_priv;
 
        connector = &psb_intel_connector->base;
+       connector->polled = DRM_CONNECTOR_POLL_HPD;
        encoder = &psb_intel_encoder->base;
        drm_connector_init(dev, connector,
                           &cdv_hdmi_connector_funcs,
maintainer
#1 lore raw
Quoted 25 lines · Kero

From: Kero van Gelder <[email protected]>

Both VGA and HDMI connectors are available on my Asus EeePC X101CH. This patch will cause output to be shown on either when plugged in. For both, it shows the leftmost 800x600, of the 1024x600 on LVDS.

---

drivers/gpu/drm/gma500/cdv_intel_crt.c +1 -0
index 8c17534..7b8386f 100644
@@ -276,6 +276,7 @@ void cdv_intel_crt_init(struct drm_device *dev,
                goto failed_connector;
 
        connector = &psb_intel_connector->base;
+       connector->polled = DRM_CONNECTOR_POLL_HPD;
        drm_connector_init(dev, connector,
                &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
drivers/gpu/drm/gma500/cdv_intel_hdmi.c +0 -0
index e223b50..464153d 100644

drivers/gpu/drm/gma500/cdv_intel_hdmi.c void cdv_hdmi_init(struct drm_device *dev,

Quoted 8 lines
drivers/gpu/drm/gma500/cdv_intel_hdmi.c +1 -1
@@ -319,6 +319,7 @@ void cdv_hdmi_init(struct drm_device *dev,
                goto err_priv;
 
        connector = &psb_intel_connector->base;
+       connector->polled = DRM_CONNECTOR_POLL_HPD;
        encoder = &psb_intel_encoder->base;
        drm_connector_init(dev, connector,
                           &cdv_hdmi_connector_funcs,
--

Your patch has been applied to:
https://github.com/patjak/drm-gma500.git gma500-next

We might also consider polling if this causes problems for people, but for now this is fine. No biggie, but your tabs where converted to spaces so I recommend running checkpatch.pl before submitting.

Thanks
Patrik Jakobsson

author
#2 lore raw

gma500: Other things that I could work on

Hi,

I would not mind improving use of my Asus EeePC X101CH with Cedar View / gma3600 a bit more. But a barrier is knowledge of the hardware. Meddling with existing (initialization) code is possible, but for point 1 and 3 below that is not going to cut, it, I expect.

Does anyone have pointers? Who should I talk to about specifications? I know Intel is not forthcoming with documentation, yet several people have made contributions for poulsbo and later versions of the hardware. How did you get the required knowledge?

Things I might, in order of personal preference, in due time (after holiday), take a look at:
1) would be nice to have the full 1024x600 on the external VGA and HDMI
I had a chance to try another monitor over HDMI, same result: only 800x600 visible.
2) booting with either VGA or HDMI plugged in, yields two black screens: both the laptop and the monitor. Un- + re-plugging has no visible effect.
3) the Fn keys for the backlight induce a response in the backlight, but only with tiny results; /sys/class/backlight/psb-bl/brightness works fine, though
4) when using modules, initialization from hibernation is not good enough:
my screen stays black; without using modules, the kernel boots normally, and everything is fine.
5) initialization from suspend is not good enough: my Asus stays in
some text mode (80x25?), but shows garbage (possibly data from the desired console or graphics mode, since sometimes there are reactions correlated to actions) Switching tty or using chvt do not improve anything.
NB: hibernating and booting solves this.

Quoted 2 lines

Your patch has been applied to:
https://github.com/patjak/drm-gma500.git gma500-next

Thanks!

Quoted 2 lines

We might also consider polling if this causes problems for people, but for now this is fine.

Agreed;
The Display Port was already hotpluggable; the Asus has no such connector, but is not bothered by polling (status is and remains 'disconnected'). That makes me hopeful that hardware without VGA or HDMI connectors will not be negatively affected. But given the 5 points above, there's no guarantee.

Quoted 2 lines

No biggie, but your tabs where converted to spaces so I recommend running checkpatch.pl before submitting.

woops, my mistake. will run checkpatch.pl next time.

Bye,
Kero.

Signature · 3 lines
Are you master of your time here?
Are you master of your own fate?
                   -- Deep Inside -- Exile -- To-Mera
maintainer
#3 lore raw

Re: gma500: Other things that I could work on

Quoted 5 lines · Kero

Hi,

I would not mind improving use of my Asus EeePC X101CH with Cedar View / gma3600 a bit more. But a barrier is knowledge of the hardware. Meddling with existing (initialization) code is possible, but for point 1 and 3 below that is not going to cut, it, I expect.

It would be very useful if you could help out with cedarview. Even if it's just by testing patches. A big problem for me is that I don't have the hardware so it's easy to break things without even knowing about it.

Quoted 5 lines

Does anyone have pointers? Who should I talk to about specifications? I know Intel is not forthcoming with documentation, yet several people have made contributions for poulsbo and later versions of the hardware. How did you get the required knowledge?

Most of the mode setting stuff are variations of Intel hardware. You can find specifications at https://01.org/linuxgraphics/ and it's also useful to look at the Intel i915 drm driver for reference. It is quite a mix so you need to look at bits and pieces from several of the Intel generations and try to match them together.

For the non-Intel parts there are some drivers that never made it into mainline but is still available online. Some parts are open and some are closed.

There is also a fair amount of guessing and probing needed.

Quoted 15 lines

Things I might, in order of personal preference, in due time (after holiday), take a look at:
1) would be nice to have the full 1024x600 on the external VGA and HDMI
I had a chance to try another monitor over HDMI, same result: only 800x600 visible.
2) booting with either VGA or HDMI plugged in, yields two black screens: both the laptop and the monitor. Un- + re-plugging has no visible effect.
3) the Fn keys for the backlight induce a response in the backlight, but only with tiny results; /sys/class/backlight/psb-bl/brightness works fine, though
4) when using modules, initialization from hibernation is not good enough:
my screen stays black; without using modules, the kernel boots normally, and everything is fine.
5) initialization from suspend is not good enough: my Asus stays in
some text mode (80x25?), but shows garbage (possibly data from the desired console or graphics mode, since sometimes there are reactions correlated to actions) Switching tty or using chvt do not improve anything.
NB: hibernating and booting solves this.

There are quite a few issues that needs to be addressed and code that needs to be refactored. I suggest you just dig in and get your hands dirty.

-Patrik

maintainer
#4 lore raw

Re: gma500: Other things that I could work on

In reply to Kero

Hi Kero

Quoted 7 lines

4) when using modules, initialization from hibernation is not good enough:
my screen stays black; without using modules, the kernel boots normally, and everything is fine.
5) initialization from suspend is not good enough: my Asus stays in
some text mode (80x25?), but shows garbage (possibly data from the desired console or graphics mode, since sometimes there are reactions correlated to actions) Switching tty or using chvt do not improve anything.
NB: hibernating and booting solves this.

I may have fixed some of your issues, could you please try the latest gma500-next and report back.

https://github.com/patjak/drm-gma500.git gma500-next

Thanks
Patrik

author
#5 lore raw

Re: gma500: Other things that I could work on

Quoted 8 lines
Quoted 7 lines

4) when using modules, initialization from hibernation is not good enough:
my screen stays black; without using modules, the kernel boots normally, and everything is fine.
5) initialization from suspend is not good enough: my Asus stays in
some text mode (80x25?), but shows garbage (possibly data from the desired console or graphics mode, since sometimes there are reactions correlated to actions) Switching tty or using chvt do not improve anything.
NB: hibernating and booting solves this.

Quoted 4 lines

I may have fixed some of your issues, could you please try the latest gma500-next and report back.

https://github.com/patjak/drm-gma500.git gma500-next

Like I said, I am on vacation.
So it took a while before I had some time to spend on this experiment. The good news, both problems seem to be solved on my hardware.

Bye,
Kero.

Signature · 3 lines
Are you master of your time here?
Are you master of your own fate?
                   -- Deep Inside -- Exile -- To-Mera
maintainer
#6 lore raw

Re: gma500: Other things that I could work on

Quoted 8 lines · Kero
Quoted 8 lines
Quoted 7 lines

4) when using modules, initialization from hibernation is not good enough:
my screen stays black; without using modules, the kernel boots normally, and everything is fine.
5) initialization from suspend is not good enough: my Asus stays in
some text mode (80x25?), but shows garbage (possibly data from the desired console or graphics mode, since sometimes there are reactions correlated to actions) Switching tty or using chvt do not improve anything.
NB: hibernating and booting solves this.

Quoted 8 lines
Quoted 4 lines

I may have fixed some of your issues, could you please try the latest gma500-next and report back.

https://github.com/patjak/drm-gma500.git gma500-next

Like I said, I am on vacation.
So it took a while before I had some time to spend on this experiment. The good news, both problems seem to be solved on my hardware.

Vacation is vacation... you're excused ;)

Thanks for testing, seems the biggest bumps for cdv suspend/hibernation are gone. Feel free to look at the other issues if you have some spare time on your hands.

-Patrik