Skip to contentSkip to conversation

3.4.39-stable review

PATCH In review Greg Kroah-Hartman 3 participants 71 messages Apr 2, 2013 – Apr 8, 2013

Subsystems (52)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 3.4.39-stable review

This is the start of the stable review cycle for the 3.4.39 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu Apr 4 22:12:59 UTC 2013. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.39-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.4.39-rc1

Steve Glendinning <[email protected]>
smsc75xx: fix jumbo frame support

Veaceslav Falico <[email protected]>
pch_gbe: fix ip_summed checksum reporting on rx

Eric Dumazet <[email protected]>
net: add a synchronize_net() in netdev_rx_handler_unregister()

[email protected] <[email protected]>
ks8851: Fix interpretation of rxlen field.

Hannes Frederic Sowa <[email protected]>
ipv6: don't accept node local multicast traffic from the wire

Hong Zhiguo <[email protected]>
ipv6: fix bad free of addrconf_init_net

Hannes Frederic Sowa <[email protected]>
ipv6: don't accept multicast traffic with scope 0

Joseph CHANG <[email protected]>
DM9000B: driver initialization upgrade

Hannes Frederic Sowa <[email protected]>
atl1e: drop pci-msi support because of packet corruption

Eric Dumazet <[email protected]>
aoe: reserve enough headroom on skbs

Andrey Vagin <[email protected]>
net: fix *_DIAG_MAX constants

Mugunthan V N <[email protected]>
drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue

Mugunthan V N <[email protected]>
drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue

[email protected] <[email protected]>
bonding: fix disabling of arp_interval and miimon

[email protected] <[email protected]>
bonding: fix miimon and arp_interval delayed work race conditions

Veaceslav Falico <[email protected]>
bonding: remove already created master sysfs link on failure

dingtianhong <[email protected]>
af_unix: dont send SCM_CREDENTIAL when dest socket is NULL

Paul Moore <[email protected]>
unix: fix a race condition in unix_release()

Masatake YAMATO <[email protected]>
thermal: shorten too long mcast group name

Cong Wang <[email protected]>
8021q: fix a potential use-after-free

Yuchung Cheng <[email protected]>
tcp: undo spurious timeout after SACK reneging

Eric Dumazet <[email protected]>
tcp: preserve ACK clocking in TSO

Mirko Lindner <[email protected]>
sky2: Threshold for Pause Packet is set wrong

Mirko Lindner <[email protected]>
sky2: Receive Overflows not counted

Eric Dumazet <[email protected]>
net: remove a WARN_ON() in net_enable_timestamp()

Steven Rostedt (Red Hat) <[email protected]>
tracing: Prevent buffer overwrite disabled for latency tracers

Steven Rostedt (Red Hat) <[email protected]>
tracing: Protect tracer flags with trace_types_lock

Theodore Ts'o <[email protected]>
ext4: use atomic64_t for the per-flexbg free_clusters count

Lukas Czerner <[email protected]>
ext4: convert number of blocks to clusters properly

Matt Fleming <[email protected]>
efivars: Handle duplicate names from get_next_variable()

Matt Fleming <[email protected]>
efivars: explicitly calculate length of VariableName

Josef Bacik <[email protected]>
Btrfs: fix space leak when we fail to reserve metadata space

Ville Syrjälä <[email protected]>

    drm/i915: Don't clobber crtc->fb when queue_flip fails

J. Bruce Fields <[email protected]>
nfsd4: reject "negative" acl lengths

Mac Lin <[email protected]>
ARM: cns3xxx: fix mapping of private memory region

Anatol Pomozov <[email protected]>
loop: prevent bdev freeing while device in use

Alan Stern <[email protected]>
usb: gadget: udc-core: fix a regression during gadget driver unbinding

Josef Bacik <[email protected]>
Btrfs: don't drop path when printing out tree errors in scrub

Josef Bacik <[email protected]>
Btrfs: limit the global reserve to 512mb

Chris Mason <[email protected]>
Btrfs: fix race between mmap writes and compression

Vivek Gautam <[email protected]>
usb: xhci: Fix TRB transfer length macro used for Event TRB.

Kees Cook <[email protected]>
net/irda: add missing error path release_sock call

fanchaoting <[email protected]>
pnfs-block: removing DM device maybe cause oops when call dev_remove

Bing Zhao <[email protected]>
mwifiex: cancel cmd timer and free curr_cmd in shutdown process

Al Viro <[email protected]>
vt: synchronize_rcu() under spinlock is not nice...

Konstantin Holoborodko <[email protected]>
usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD

Pawel Wieczorkiewicz <[email protected]>

    tty: atmel_serial_probe(): index of atmel_ports[] fix

Jan Beulich <[email protected]>
xen-blkback: fix dispatch_rw_block_io() error path

David Vrabel <[email protected]>
xen/blkback: correctly respond to unknown, non-native requests

Joerg Roedel <[email protected]>
iommu/amd: Make sure dma_ops are set for hotplug devices

Kees Cook <[email protected]>
tg3: fix length overflow in VPD firmware parsing

Rafał Miłecki <[email protected]>
b43: N-PHY: use more bits for offset in RSSI calibration

Iestyn C. Elfick <[email protected]>
b43: A fix for DMA transmission sequence errors

Rafał Miłecki <[email protected]>
b43: N-PHY: increase initial value of "mind" in RSSI calibration

Jussi Kivilinna <[email protected]>
rtlwifi: usb: add missing freeing of skbuff

Josh Boyer <[email protected]>
HID: usbhid: quirk for Realtek Multi-card reader

Felix Fietkau <[email protected]>
ath9k_hw: revert chainmask to user configuration after calibration

Marc Kleine-Budde <[email protected]>
can: sja1000: fix define conflict on SH

Ming Lei <[email protected]>
sysfs: handle failure path correctly for readdir()

Ming Lei <[email protected]>
sysfs: fix race between readdir and lseek

Ian Abbott <[email protected]>
staging: comedi: s626: fix continuous acquisition

Ming Lei <[email protected]>
Bluetooth: Add support for Dell[QCA 0cf3:817a]

Ming Lei <[email protected]>
Bluetooth: Add support for Dell[QCA 0cf3:0036]

Vinicius Costa Gomes <[email protected]>
Bluetooth: Fix not closing SCO sockets in the BT_CONNECT2 state

Chris Metcalf <[email protected]>
tile: expect new initramfs name from hypervisor file system

Trond Myklebust <[email protected]>
SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked

Andrew Morton <[email protected]>
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

Ben Hutchings <[email protected]>
signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/include/asm/signal.h                      |   1 +
 arch/arm/mach-cns3xxx/core.c                       |  16 +-
 arch/arm/mach-cns3xxx/include/mach/cns3xxx.h       |  16 +-
 arch/avr32/include/asm/signal.h                    |   1 +
 arch/cris/include/asm/signal.h                     |   1 +
 arch/h8300/include/asm/signal.h                    |   1 +
 arch/m32r/include/asm/signal.h                     |   1 +
 arch/m68k/include/asm/signal.h                     |   1 +
 arch/mn10300/include/asm/signal.h                  |   1 +
 arch/powerpc/include/asm/signal.h                  |   1 +
 arch/s390/include/asm/signal.h                     |   1 +
 arch/sparc/include/asm/signal.h                    |   1 +
 arch/tile/kernel/setup.c                           |  25 ++-
 arch/x86/include/asm/signal.h                      |   2 +
 arch/xtensa/include/asm/signal.h                   |   1 +
 drivers/block/aoe/aoecmd.c                         |   3 +-
 drivers/block/loop.c                               |   9 +-
 drivers/block/xen-blkback/blkback.c                |  38 +++-
 drivers/block/xen-blkback/common.h                 |  25 +++
 drivers/bluetooth/ath3k.c                          |   4 +
 drivers/bluetooth/btusb.c                          |   2 +
 drivers/firmware/efivars.c                         |  93 ++++++++-
 drivers/gpu/drm/i915/intel_display.c               |  11 +-
 drivers/hid/hid-ids.h                              |   3 +
 drivers/hid/usbhid/hid-quirks.c                    |   1 +
 drivers/iommu/amd_iommu.c                          |  22 +--
 drivers/net/bonding/bond_main.c                    |  88 +++------
 drivers/net/bonding/bond_sysfs.c                   | 121 ++++++------
 drivers/net/can/sja1000/plx_pci.c                  |   4 +-
 drivers/net/can/sja1000/sja1000.c                  |   6 +-
 drivers/net/can/sja1000/sja1000.h                  |   2 +-
 drivers/net/ethernet/atheros/atl1e/atl1e.h         |   1 -
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c    |  22 +--
 drivers/net/ethernet/broadcom/tg3.c                |   7 +-
 drivers/net/ethernet/davicom/dm9000.c              | 214 +++++++++++----------
 drivers/net/ethernet/davicom/dm9000.h              |  11 +-
 drivers/net/ethernet/marvell/sky2.c                |   2 +-
 drivers/net/ethernet/marvell/sky2.h                |   2 +-
 drivers/net/ethernet/micrel/ks8851.c               |   2 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   |   4 +-
 drivers/net/ethernet/ti/cpsw.c                     |   2 +-
 drivers/net/ethernet/ti/davinci_emac.c             |   2 +-
 drivers/net/usb/smsc75xx.c                         |  12 +-
 drivers/net/wireless/ath/ath9k/ar9003_calib.c      |   4 +
 drivers/net/wireless/b43/dma.c                     |  65 +++++--
 drivers/net/wireless/b43/phy_n.c                   |   8 +-
 drivers/net/wireless/mwifiex/init.c                |   8 +
 drivers/net/wireless/rtlwifi/usb.c                 |   1 +
 drivers/staging/comedi/drivers/s626.c              |   2 +-
 drivers/tty/serial/atmel_serial.c                  |  11 +-
 drivers/tty/vt/vc_screen.c                         |   6 +-
 drivers/usb/gadget/udc-core.c                      |   2 +-
 drivers/usb/host/xhci-ring.c                       |  24 +--
 drivers/usb/host/xhci.h                            |   4 +
 drivers/usb/serial/ftdi_sio.c                      |   1 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   7 +
 fs/block_dev.c                                     |   1 +
 fs/btrfs/extent-tree.c                             |  49 ++++-
 fs/btrfs/extent_io.c                               |  33 ++++
 fs/btrfs/extent_io.h                               |   2 +
 fs/btrfs/inode.c                                   |  14 ++
 fs/btrfs/scrub.c                                   |   3 +-
 fs/ext4/balloc.c                                   |   2 +-
 fs/ext4/ext4.h                                     |   6 +-
 fs/ext4/ialloc.c                                   |   4 +-
 fs/ext4/mballoc.c                                  |  18 +-
 fs/ext4/resize.c                                   |   8 +-
 fs/ext4/super.c                                    |   4 +-
 fs/nfs/blocklayout/blocklayoutdm.c                 |   4 +-
 fs/nfsd/nfs4xdr.c                                  |   2 +-
 fs/sysfs/dir.c                                     |  17 +-
 include/asm-generic/signal.h                       |   4 +
 include/linux/thermal.h                            |   2 +-
 include/linux/unix_diag.h                          |   4 +-
 include/xen/interface/io/blkif.h                   |  10 +
 kernel/signal.c                                    |   2 +-
 kernel/trace/trace.c                               |  50 +++--
 kernel/trace/trace.h                               |   7 +
 kernel/trace/trace_irqsoff.c                       |  19 +-
 kernel/trace/trace_sched_wakeup.c                  |  18 +-
 net/8021q/vlan.c                                   |  14 +-
 net/bluetooth/sco.c                                |   1 +
 net/core/dev.c                                     |   7 +-
 net/ipv4/tcp_input.c                               |   7 +-
 net/ipv4/tcp_output.c                              |   7 +-
 net/ipv6/addrconf.c                                |  26 +--
 net/ipv6/ip6_input.c                               |  21 ++
 net/irda/af_irda.c                                 |   6 +-
 net/netlink/genetlink.c                            |   1 +
 net/sunrpc/sched.c                                 |   9 +-
 net/unix/af_unix.c                                 |  11 +-
 92 files changed, 847 insertions(+), 476 deletions(-)
author maintainer
#1 lore raw

PATCH 1/68 signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side struct sigaction declarations'.

flush_signal_handlers() needs to know whether sigaction::sa_restorer is defined, not whether SA_RESTORER is defined. Define the __ARCH_HAS_SA_RESTORER macro to indicate this.

---
 arch/arm/include/asm/signal.h     |    1 +
 arch/avr32/include/asm/signal.h   |    1 +
 arch/cris/include/asm/signal.h    |    1 +
 arch/h8300/include/asm/signal.h   |    1 +
 arch/m32r/include/asm/signal.h    |    1 +
 arch/m68k/include/asm/signal.h    |    1 +
 arch/mn10300/include/asm/signal.h |    1 +
 arch/powerpc/include/asm/signal.h |    1 +
 arch/s390/include/asm/signal.h    |    1 +
 arch/sparc/include/asm/signal.h   |    1 +
 arch/x86/include/asm/signal.h     |    2 ++
 arch/xtensa/include/asm/signal.h  |    1 +
 include/asm-generic/signal.h      |    4 ++++
 13 files changed, 17 insertions(+)
arch/arm/include/asm/signal.h +1 -0
@@ -127,6 +127,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/avr32/include/asm/signal.h +1 -0
@@ -128,6 +128,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/cris/include/asm/signal.h +1 -0
@@ -122,6 +122,7 @@ struct sigaction {
 	void (*sa_restorer)(void);
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/h8300/include/asm/signal.h +1 -0
@@ -121,6 +121,7 @@ struct sigaction {
 	void (*sa_restorer)(void);
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/m32r/include/asm/signal.h +1 -0
@@ -123,6 +123,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/m68k/include/asm/signal.h +1 -0
@@ -119,6 +119,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/mn10300/include/asm/signal.h +1 -0
@@ -131,6 +131,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/powerpc/include/asm/signal.h +1 -0
@@ -109,6 +109,7 @@ struct sigaction {
 	__sigrestore_t sa_restorer;
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
arch/s390/include/asm/signal.h +1 -0
@@ -131,6 +131,7 @@ struct sigaction {
         void (*sa_restorer)(void);
         sigset_t sa_mask;               /* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
         struct sigaction sa;
arch/sparc/include/asm/signal.h +1 -0
@@ -192,6 +192,7 @@ struct __old_sigaction {
 	unsigned long		sa_flags;
 	void			(*sa_restorer)(void);  /* not used by Linux/SPARC yet */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 typedef struct sigaltstack {
 	void			__user *ss_sp;
arch/x86/include/asm/signal.h +2 -0
@@ -125,6 +125,8 @@ typedef unsigned long sigset_t;
 extern void do_notify_resume(struct pt_regs *, void *, __u32);
 # endif /* __KERNEL__ */
 
+#define __ARCH_HAS_SA_RESTORER
+
 #ifdef __i386__
 # ifdef __KERNEL__
 struct old_sigaction {
arch/xtensa/include/asm/signal.h +1 -0
@@ -133,6 +133,7 @@ struct sigaction {
 	void (*sa_restorer)(void);
 	sigset_t sa_mask;		/* mask last for extensibility */
 };
+#define __ARCH_HAS_SA_RESTORER
 
 struct k_sigaction {
 	struct sigaction sa;
include/asm-generic/signal.h +4 -0
@@ -99,6 +99,10 @@ typedef unsigned long old_sigset_t;
 
 #include <asm-generic/signal-defs.h>
 
+#ifdef SA_RESTORER
+#define __ARCH_HAS_SA_RESTORER
+#endif
+
 struct sigaction {
 	__sighandler_t sa_handler;
 	unsigned long sa_flags;
author maintainer
#2 lore raw

PATCH 2/68 kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Morton <[email protected]>

commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream.

__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees.

Cc Emese Revfy <[email protected]>
Cc Emese Revfy <[email protected]>
Cc PaX Team <[email protected]>
Cc Al Viro <[email protected]>
Cc Oleg Nesterov <[email protected]>
Cc "Eric W. Biederman" <[email protected]>
Cc Serge Hallyn <[email protected]>
Cc Julien Tinnes <[email protected]>
Cc Ben Hutchings <[email protected]>
---
 kernel/signal.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/signal.c +1 -1
@@ -482,7 +482,7 @@ flush_signal_handlers(struct task_struct
 		if (force_default || ka->sa.sa_handler != SIG_IGN)
 			ka->sa.sa_handler = SIG_DFL;
 		ka->sa.sa_flags = 0;
-#ifdef SA_RESTORER
+#ifdef __ARCH_HAS_SA_RESTORER
 		ka->sa.sa_restorer = NULL;
 #endif
 		sigemptyset(&ka->sa.sa_mask);
author maintainer
#3 lore raw

PATCH 3/68 SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 1166fde6a923c30f4351515b6a9a1efc513e7d00 upstream.

We need to be careful when testing task->tk_waitqueue in rpc_wake_up_task_queue_locked, because it can be changed while we are holding the queue->lock.
By adding appropriate memory barriers, we can ensure that it is safe to test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set.

---
 net/sunrpc/sched.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
net/sunrpc/sched.c +7 -2
@@ -143,6 +143,8 @@ static void __rpc_add_wait_queue(struct
 		list_add_tail(&task->u.tk_wait.list, &queue->tasks[0]);
 	task->tk_waitqueue = queue;
 	queue->qlen++;
+	/* barrier matches the read in rpc_wake_up_task_queue_locked() */
+	smp_wmb();
 	rpc_set_queued(task);
 
 	dprintk("RPC: %5u added to queue %p \"%s\"\n",
@@ -399,8 +401,11 @@ static void __rpc_do_wake_up_task(struct
  */
 static void rpc_wake_up_task_queue_locked(struct rpc_wait_queue *queue, struct rpc_task *task)
 {
-	if (RPC_IS_QUEUED(task) && task->tk_waitqueue == queue)
-		__rpc_do_wake_up_task(queue, task);
+	if (RPC_IS_QUEUED(task)) {
+		smp_rmb();
+		if (task->tk_waitqueue == queue)
+			__rpc_do_wake_up_task(queue, task);
+	}
 }
 
 /*
author maintainer
#4 lore raw

PATCH 4/68 tile: expect new initramfs name from hypervisor file system

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Metcalf <[email protected]>

commit ff7f3efb9abf986f4ecd8793a9593f7ca4d6431a upstream.

The current Tilera boot infrastructure now provides the initramfs to Linux as a Tilera-hypervisor file named "initramfs", rather than "initramfs.cpio.gz", as before. (This makes it reasonable to use other compression techniques than gzip on the file without having to worry about the name causing confusion.) Adapt to use the new name, but also fall back to checking for the old name.

Cc'ing to stable so that older kernels will remain compatible with newer Tilera boot infrastructure.

---
 arch/tile/kernel/setup.c |   25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
arch/tile/kernel/setup.c +12 -13
@@ -912,15 +912,8 @@ void __cpuinit setup_cpu(int boot)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default.  If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
 static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
 
 static int __init setup_initramfs_file(char *str)
 {
@@ -934,9 +927,9 @@ static int __init setup_initramfs_file(c
 early_param("initramfs_file", setup_initramfs_file);
 
 /*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs.  If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
  */
 static void __init load_hv_initrd(void)
 {
@@ -946,10 +939,16 @@ static void __init load_hv_initrd(void)
 
 	fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
 	if (fd == HV_ENOENT) {
-		if (set_initramfs_file)
+		if (set_initramfs_file) {
 			pr_warning("No such hvfs initramfs file '%s'\n",
 				   initramfs_file);
-		return;
+			return;
+		} else {
+			/* Try old backwards-compatible name. */
+			fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+			if (fd == HV_ENOENT)
+				return;
+		}
 	}
 	BUG_ON(fd < 0);
 	stat = hv_fs_fstat(fd);
author maintainer
#5 lore raw

PATCH 5/68 Bluetooth: Fix not closing SCO sockets in the BT_CONNECT2 state

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vinicius Costa Gomes <[email protected]>

commit eb20ff9c91ddcb2d55c1849a87d3db85af5e88a9 upstream.

With deferred setup for SCO, it is possible that userspace closes the socket when it is in the BT_CONNECT2 state, after the Connect Request is received but before the Accept Synchonous Connection is sent.

If this happens the following crash was observed, when the connection is terminated:

[  +0.000003] hci_sync_conn_complete_evt: hci0 status 0x10
[  +0.000005] sco_connect_cfm: hcon ffff88003d1bd800 bdaddr 40:98:4e:32:d7:39 status 16
[  +0.000003] sco_conn_del: hcon ffff88003d1bd800 conn ffff88003cc8e300, err 110
[  +0.000015] BUG: unable to handle kernel NULL pointer dereference at 0000000000000199
[  +0.000906] IP: [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000] PGD 3d21f067 PUD 3d291067 PMD 0
[  +0.000000] Oops: 0002 [#1] SMP
[  +0.000000] Modules linked in: rfcomm bnep btusb bluetooth
[  +0.000000] CPU 0
[  +0.000000] Pid: 1481, comm: kworker/u:2H Not tainted 3.9.0-rc1-25019-gad82cdd #1 Bochs Bochs
[  +0.000000] RIP: 0010:[<ffffffff810620dd>]  [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000] RSP: 0018:ffff88003c3c19d8  EFLAGS: 00010002
[  +0.000000] RAX: 0000000000000001 RBX: 0000000000000246 RCX: 0000000000000000
[  +0.000000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003d1be868
[  +0.000000] RBP: ffff88003c3c1a98 R08: 0000000000000002 R09: 0000000000000000
[  +0.000000] R10: ffff88003d1be868 R11: ffff88003e20b000 R12: 0000000000000002
[  +0.000000] R13: ffff88003aaa8000 R14: 000000000000006e R15: ffff88003d1be850
[  +0.000000] FS:  0000000000000000(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000
[  +0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  +0.000000] CR2: 0000000000000199 CR3: 000000003c1cb000 CR4: 00000000000006b0
[  +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  +0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  +0.000000] Process kworker/u:2H (pid: 1481, threadinfo ffff88003c3c0000, task ffff88003aaa8000)
[  +0.000000] Stack:
[  +0.000000]  ffffffff81b16342 0000000000000000 0000000000000000 ffff88003d1be868
[  +0.000000]  ffffffff00000000 00018c0c7863e367 000000003c3c1a28 ffffffff8101efbd
[  +0.000000]  0000000000000000 ffff88003e3d2400 ffff88003c3c1a38 ffffffff81007c7a
[  +0.000000] Call Trace:
[  +0.000000]  [<ffffffff8101efbd>] ? kvm_clock_read+0x34/0x3b
[  +0.000000]  [<ffffffff81007c7a>] ? paravirt_sched_clock+0x9/0xd
[  +0.000000]  [<ffffffff81007fd4>] ? sched_clock+0x9/0xb
[  +0.000000]  [<ffffffff8104fd7a>] ? sched_clock_local+0x12/0x75
[  +0.000000]  [<ffffffff810632d1>] lock_acquire+0x93/0xb1
[  +0.000000]  [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffff8105f3d8>] ? lock_release_holdtime.part.22+0x4e/0x55
[  +0.000000]  [<ffffffff814f6038>] _raw_spin_lock+0x40/0x74
[  +0.000000]  [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffff814f6936>] ? _raw_spin_unlock+0x23/0x36
[  +0.000000]  [<ffffffffa0022339>] spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffffa00230cc>] sco_conn_del+0x76/0xbb [bluetooth]
[  +0.000000]  [<ffffffffa002391d>] sco_connect_cfm+0x2da/0x2e9 [bluetooth]
[  +0.000000]  [<ffffffffa000862a>] hci_proto_connect_cfm+0x38/0x65 [bluetooth]
[  +0.000000]  [<ffffffffa0008d30>] hci_sync_conn_complete_evt.isra.79+0x11a/0x13e [bluetooth]
[  +0.000000]  [<ffffffffa000cd96>] hci_event_packet+0x153b/0x239d [bluetooth]
[  +0.000000]  [<ffffffff814f68ff>] ? _raw_spin_unlock_irqrestore+0x48/0x5c
[  +0.000000]  [<ffffffffa00025f6>] hci_rx_work+0xf3/0x2e3 [bluetooth]
[  +0.000000]  [<ffffffff8103efed>] process_one_work+0x1dc/0x30b
[  +0.000000]  [<ffffffff8103ef83>] ? process_one_work+0x172/0x30b
[  +0.000000]  [<ffffffff8103e07f>] ? spin_lock_irq+0x9/0xb
[  +0.000000]  [<ffffffff8103fc8d>] worker_thread+0x123/0x1d2
[  +0.000000]  [<ffffffff8103fb6a>] ? manage_workers+0x240/0x240
[  +0.000000]  [<ffffffff81044211>] kthread+0x9d/0xa5
[  +0.000000]  [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60
[  +0.000000]  [<ffffffff814f75bc>] ret_from_fork+0x7c/0xb0
[  +0.000000]  [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60
[  +0.000000] Code: d7 44 89 8d 50 ff ff ff 4c 89 95 58 ff ff ff e8 44 fc ff ff 44 8b 8d 50 ff ff ff 48 85 c0 4c 8b 95 58 ff ff ff 0f 84 7a 04 00 00 <f0> ff 80 98 01 00 00 83 3d 25 41 a7 00 00 45 8b b5 e8 05 00 00
[  +0.000000] RIP  [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000]  RSP <ffff88003c3c19d8>
[  +0.000000] CR2: 0000000000000199
[  +0.000000] ---[ end trace e73cd3b52352dd34 ]---
---
 net/bluetooth/sco.c |    1 +
 1 file changed, 1 insertion(+)
net/bluetooth/sco.c +1 -0
@@ -378,6 +378,7 @@ static void __sco_sock_close(struct sock
 			sco_chan_del(sk, ECONNRESET);
 		break;
 
+	case BT_CONNECT2:
 	case BT_CONNECT:
 	case BT_DISCONN:
 		sco_chan_del(sk, ECONNRESET);
author maintainer
#6 lore raw

PATCH 6/68 Bluetooth: Add support for Dell[QCA 0cf3:0036]

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Lei <[email protected]>

commit d66629c1325399cf080ba8b2fb086c10e5439cdd upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=0036 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
---
 drivers/bluetooth/ath3k.c |    2 ++
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -72,6 +72,7 @@ static struct usb_device_id ath3k_table[
 	{ USB_DEVICE(0x03F0, 0x311D) },
 
 	/* Atheros AR3012 with sflash firmware*/
+	{ USB_DEVICE(0x0CF3, 0x0036) },
 	{ USB_DEVICE(0x0CF3, 0x3004) },
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
@@ -93,6 +94,7 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
 static struct usb_device_id ath3k_blist_tbl[] = {
 
 	/* Atheros AR3012 with sflash firmware*/
+	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -136,6 +136,7 @@ static struct usb_device_id blacklist_ta
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros 3012 with sflash firmware */
+	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
author maintainer
#7 lore raw

PATCH 7/68 Bluetooth: Add support for Dell[QCA 0cf3:817a]

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Lei <[email protected]>

commit ebaf5795ef57a70a042ea259448a465024e2821d upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=817a Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
---
 drivers/bluetooth/ath3k.c |    2 ++
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[
 	{ USB_DEVICE(0x0CF3, 0x0036) },
 	{ USB_DEVICE(0x0CF3, 0x3004) },
 	{ USB_DEVICE(0x0CF3, 0x311D) },
+	{ USB_DEVICE(0x0CF3, 0x817a) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
@@ -97,6 +98,7 @@ static struct usb_device_id ath3k_blist_
 	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
@@ -139,6 +139,7 @@ static struct usb_device_id blacklist_ta
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
author maintainer
#8 lore raw

PATCH 8/68 staging: comedi: s626: fix continuous acquisition

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit e4317ce877a31dbb9d96375391c1c4ad2210d637 upstream.

For the s626 driver, there is a bug in the handling of asynchronous commands on the AI subdevice when the stop source is TRIG_NONE. The command should run continuously until cancelled, but the interrupt handler stops the command running after the first scan.

The command set-up function s626_ai_cmd() contains this code:

	switch (cmd->stop_src) {
	case TRIG_COUNT:
		/*  data arrives as one packet */
		devpriv->ai_sample_count = cmd->stop_arg;
		devpriv->ai_continous = 0;
		break;
	case TRIG_NONE:
		/*  continous acquisition */
		devpriv->ai_continous = 1;
		devpriv->ai_sample_count = 0;
		break;
	}

The interrupt handler s626_irq_handler() contains this code:

		if (!(devpriv->ai_continous))
			devpriv->ai_sample_count--;
		if (devpriv->ai_sample_count <= 0) {
			devpriv->ai_cmd_running = 0;
			/* ... */
		}

So devpriv->ai_sample_count is only decremented for the TRIG_COUNT case, but devpriv->ai_cmd_running is set to 0 (and the command stopped) regardless.

Fix this in s626_ai_cmd() by setting devpriv->ai_sample_count = 1 for the TRIG_NONE case. The interrupt handler will not decrement it so it will remain greater than 0 and the check for stopping the acquisition will fail.

---
 drivers/staging/comedi/drivers/s626.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/comedi/drivers/s626.c +1 -1
@@ -1882,7 +1882,7 @@ static int s626_ai_cmd(struct comedi_dev
 	case TRIG_NONE:
 		/*  continous acquisition */
 		devpriv->ai_continous = 1;
-		devpriv->ai_sample_count = 0;
+		devpriv->ai_sample_count = 1;
 		break;
 	}
 
author maintainer
#9 lore raw

PATCH 9/68 sysfs: fix race between readdir and lseek

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Lei <[email protected]>

commit 991f76f837bf22c5bb07261cfd86525a0a96650c upstream.

While readdir() is running, lseek() may set filp->f_pos as zero, then may leave filp->private_data pointing to one sysfs_dirent object without holding its reference counter, so the sysfs_dirent object may be used after free in next readdir().

This patch holds inode->i_mutex to avoid the problem since the lock is always held in readdir path.

---
 fs/sysfs/dir.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
fs/sysfs/dir.c +12 -1
@@ -1040,10 +1040,21 @@ static int sysfs_readdir(struct file * f
 	return 0;
 }
 
+static loff_t sysfs_dir_llseek(struct file *file, loff_t offset, int whence)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	loff_t ret;
+
+	mutex_lock(&inode->i_mutex);
+	ret = generic_file_llseek(file, offset, whence);
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
 
 const struct file_operations sysfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysfs_readdir,
 	.release	= sysfs_dir_release,
-	.llseek		= generic_file_llseek,
+	.llseek		= sysfs_dir_llseek,
 };
author maintainer
#10 lore raw

PATCH 10/68 sysfs: handle failure path correctly for readdir()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Lei <[email protected]>

commit e5110f411d2ee35bf8d202ccca2e89c633060dca upstream.

In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(), the failure from filldir() isn't handled, and the reference counter of the sysfs_dirent object pointed by filp->private_data will be released without clearing filp->private_data, so use after free bug will be triggered later.

This patch returns immeadiately under the situation for fixing the bug, and it is reasonable to return from readdir() when filldir() fails.

---
 fs/sysfs/dir.c |    4 ++++
 1 file changed, 4 insertions(+)
fs/sysfs/dir.c +4 -0
@@ -1002,6 +1002,8 @@ static int sysfs_readdir(struct file * f
 		ino = parent_sd->s_ino;
 		if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) == 0)
 			filp->f_pos++;
+		else
+			return 0;
 	}
 	if (filp->f_pos == 1) {
 		if (parent_sd->s_parent)
@@ -1010,6 +1012,8 @@ static int sysfs_readdir(struct file * f
 			ino = parent_sd->s_ino;
 		if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
 			filp->f_pos++;
+		else
+			return 0;
 	}
 	mutex_lock(&sysfs_mutex);
 	for (pos = sysfs_dir_pos(ns, parent_sd, filp->f_pos, pos);
author maintainer
#11 lore raw

PATCH 11/68 can: sja1000: fix define conflict on SH

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marc Kleine-Budde <[email protected]>

commit f901b6bc404b67d96eca739857c097e022727b71 upstream.

Thias patch fixes a define conflict between the SH architecture and the sja1000 driver:

drivers/net/can/sja1000/sja1000.h:59:0: warning:
"REG_SR" redefined [enabled by default]
arch/sh/include/asm/ptrace_32.h:25:0: note:
this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h.

---
 drivers/net/can/sja1000/plx_pci.c |    4 ++--
 drivers/net/can/sja1000/sja1000.c |    6 +++---
 drivers/net/can/sja1000/sja1000.h |    2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)
drivers/net/can/sja1000/plx_pci.c +2 -2
@@ -329,7 +329,7 @@ static inline int plx_pci_check_sja1000(
 	 */
 	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
 	    REG_CR_BASICCAN_INITIAL &&
-	    (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+	    (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
 	    (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
 		flag = 1;
 
@@ -341,7 +341,7 @@ static inline int plx_pci_check_sja1000(
 	 * See states on p. 23 of the Datasheet.
 	 */
 	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
-	    priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+	    priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
 	    priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
 		return flag;
 
drivers/net/can/sja1000/sja1000.c +3 -3
@@ -91,7 +91,7 @@ static void sja1000_write_cmdreg(struct
 	 */
 	spin_lock_irqsave(&priv->cmdreg_lock, flags);
 	priv->write_reg(priv, REG_CMR, val);
-	priv->read_reg(priv, REG_SR);
+	priv->read_reg(priv, SJA1000_REG_SR);
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
@@ -496,7 +496,7 @@ irqreturn_t sja1000_interrupt(int irq, v
 
 	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 		n++;
-		status = priv->read_reg(priv, REG_SR);
+		status = priv->read_reg(priv, SJA1000_REG_SR);
 		/* check for absent controller due to hw unplug */
 		if (status == 0xFF && sja1000_is_absent(priv))
 			return IRQ_NONE;
@@ -515,7 +515,7 @@ irqreturn_t sja1000_interrupt(int irq, v
 			/* receive interrupt */
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
-				status = priv->read_reg(priv, REG_SR);
+				status = priv->read_reg(priv, SJA1000_REG_SR);
 				/* check for absent controller */
 				if (status == 0xFF && sja1000_is_absent(priv))
 					return IRQ_NONE;
drivers/net/can/sja1000/sja1000.h +1 -1
@@ -56,7 +56,7 @@
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
 #define REG_MOD		0x00
 #define REG_CMR		0x01
-#define REG_SR		0x02
+#define SJA1000_REG_SR		0x02
 #define REG_IR		0x03
 #define REG_IER		0x04
 #define REG_ALC		0x0B
author maintainer
#12 lore raw

PATCH 12/68 ath9k_hw: revert chainmask to user configuration after calibration

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

commit 74632d11a133b5baf6b9d622dd19d2f944d93d94 upstream.

The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early.

That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets).

Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run.

---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/ath/ath9k/ar9003_calib.c +4 -0
@@ -938,6 +938,7 @@ static bool ar9003_hw_init_cal(struct at
 					  AR_PHY_CL_TAB_1,
 					  AR_PHY_CL_TAB_2 };
 
+	/* Use chip chainmask only for calibration */
 	ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
 
 	if (rtt) {
@@ -1085,6 +1086,9 @@ skip_tx_iqcal:
 		ar9003_hw_rtt_disable(ah);
 	}
 
+	/* Revert chainmask to runtime parameters */
+	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
+
 	/* Initialize list pointers */
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 	ah->supp_cals = IQ_MISMATCH_CAL;
author maintainer
#13 lore raw

PATCH 13/68 HID: usbhid: quirk for Realtek Multi-card reader

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Boyer <[email protected]>

commit 3d464d9b71ef2f2b40a4bc9dcf06794fd1be9d12 upstream.

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

---
 drivers/hid/hid-ids.h           |    3 +++
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 4 insertions(+)
drivers/hid/hid-ids.h +3 -0
@@ -644,6 +644,9 @@
 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008		0x3008
 #define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN	0x3001
 
+#define USB_VENDOR_ID_REALTEK		0x0bda
+#define USB_DEVICE_ID_REALTEK_READER	0x0152
+
 #define USB_VENDOR_ID_ROCCAT		0x1e7d
 #define USB_DEVICE_ID_ROCCAT_ARVO	0x30d4
 #define USB_DEVICE_ID_ROCCAT_ISKU	0x319c
drivers/hid/usbhid/hid-quirks.c +1 -0
@@ -77,6 +77,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_REALTEK, USB_DEVICE_ID_REALTEK_READER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
author maintainer
#14 lore raw

PATCH 14/68 rtlwifi: usb: add missing freeing of skbuff

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jussi Kivilinna <[email protected]>

commit 36ef0b473fbf43d5db23eea4616cc1d18cec245f upstream.

---
 drivers/net/wireless/rtlwifi/usb.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/rtlwifi/usb.c +1 -0
@@ -853,6 +853,7 @@ static void _rtl_usb_transmit(struct iee
 	if (unlikely(!_urb)) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 			 "Can't allocate urb. Drop skb!\n");
+		kfree_skb(skb);
 		return;
 	}
 	urb_list = &rtlusb->tx_pending[ep_num];
author maintainer
#15 lore raw

PATCH 15/68 b43: N-PHY: increase initial value of "mind" in RSSI calibration

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

commit e67dd874e60529dbd2e8232babb1e23479ba2ffa upstream.

We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value.

This fixes a regression introduced in 3.4 by commit:
e0c9a0219a8f542e3946fe972a68aacf8c3f906c
(my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s)

---
 drivers/net/wireless/b43/phy_n.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/b43/phy_n.c +2 -2
@@ -1371,7 +1371,7 @@ static void b43_nphy_rev3_rssi_cal(struc
 		}
 		for (i = 0; i < 4; i++) {
 			s32 curr;
-			s32 mind = 40;
+			s32 mind = 0x100000;
 			s32 minpoll = 249;
 			u8 minvcm = 0;
 			if (2 * core != i)
@@ -1554,7 +1554,7 @@ static void b43_nphy_rev2_rssi_cal(struc
 	}
 
 	for (i = 0; i < 4; i++) {
-		s32 mind = 40;
+		s32 mind = 0x100000;
 		u8 minvcm = 0;
 		s32 minpoll = 249;
 		s32 curr;
author maintainer
#16 lore raw

PATCH 16/68 b43: A fix for DMA transmission sequence errors

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Iestyn C. Elfick" <[email protected]>

commit b251412db99ccd4495ce372fec7daee27bf06923 upstream.

Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected.

This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair.

Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs.

---
 drivers/net/wireless/b43/dma.c |   65 +++++++++++++++++++++++++++++++++--------
 1 file changed, 53 insertions(+), 12 deletions(-)
drivers/net/wireless/b43/dma.c +53 -12
@@ -1487,8 +1487,12 @@ void b43_dma_handle_txstatus(struct b43_
 	const struct b43_dma_ops *ops;
 	struct b43_dmaring *ring;
 	struct b43_dmadesc_meta *meta;
+	static const struct b43_txstatus fake; /* filled with 0 */
+	const struct b43_txstatus *txstat;
 	int slot, firstused;
 	bool frame_succeed;
+	int skip;
+	static u8 err_out1, err_out2;
 
 	ring = parse_cookie(dev, status->cookie, &slot);
 	if (unlikely(!ring))
@@ -1501,13 +1505,36 @@ void b43_dma_handle_txstatus(struct b43_
 	firstused = ring->current_slot - ring->used_slots + 1;
 	if (firstused < 0)
 		firstused = ring->nr_slots + firstused;
+
+	skip = 0;
 	if (unlikely(slot != firstused)) {
 		/* This possibly is a firmware bug and will result in
-		 * malfunction, memory leaks and/or stall of DMA functionality. */
-		b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
-		       "Expected %d, but got %d\n",
-		       ring->index, firstused, slot);
-		return;
+		 * malfunction, memory leaks and/or stall of DMA functionality.
+		 */
+		if (slot == next_slot(ring, next_slot(ring, firstused))) {
+			/* If a single header/data pair was missed, skip over
+			 * the first two slots in an attempt to recover.
+			 */
+			slot = firstused;
+			skip = 2;
+			if (!err_out1) {
+				/* Report the error once. */
+				b43dbg(dev->wl,
+				       "Skip on DMA ring %d slot %d.\n",
+				       ring->index, slot);
+				err_out1 = 1;
+			}
+		} else {
+			/* More than a single header/data pair were missed.
+			 * Report this error once.
+			 */
+			if (!err_out2)
+				b43dbg(dev->wl,
+				       "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+				       ring->index, firstused, slot);
+			err_out2 = 1;
+			return;
+		}
 	}
 
 	ops = ring->ops;
@@ -1522,11 +1549,13 @@ void b43_dma_handle_txstatus(struct b43_
 			       slot, firstused, ring->index);
 			break;
 		}
+
 		if (meta->skb) {
 			struct b43_private_tx_info *priv_info =
-				b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+			     b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
 
-			unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+			unmap_descbuffer(ring, meta->dmaaddr,
+					 meta->skb->len, 1);
 			kfree(priv_info->bouncebuffer);
 			priv_info->bouncebuffer = NULL;
 		} else {
@@ -1538,8 +1567,9 @@ void b43_dma_handle_txstatus(struct b43_
 			struct ieee80211_tx_info *info;
 
 			if (unlikely(!meta->skb)) {
-				/* This is a scatter-gather fragment of a frame, so
-				 * the skb pointer must not be NULL. */
+				/* This is a scatter-gather fragment of a frame,
+				 * so the skb pointer must not be NULL.
+				 */
 				b43dbg(dev->wl, "TX status unexpected NULL skb "
 				       "at slot %d (first=%d) on ring %d\n",
 				       slot, firstused, ring->index);
@@ -1550,9 +1580,18 @@ void b43_dma_handle_txstatus(struct b43_
 
 			/*
 			 * Call back to inform the ieee80211 subsystem about
-			 * the status of the transmission.
+			 * the status of the transmission. When skipping over
+			 * a missed TX status report, use a status structure
+			 * filled with zeros to indicate that the frame was not
+			 * sent (frame_count 0) and not acknowledged
 			 */
-			frame_succeed = b43_fill_txstatus_report(dev, info, status);
+			if (unlikely(skip))
+				txstat = &fake;
+			else
+				txstat = status;
+
+			frame_succeed = b43_fill_txstatus_report(dev, info,
+								 txstat);
 #ifdef CONFIG_B43_DEBUG
 			if (frame_succeed)
 				ring->nr_succeed_tx_packets++;
@@ -1580,12 +1619,14 @@ void b43_dma_handle_txstatus(struct b43_
 		/* Everything unmapped and free'd. So it's not used anymore. */
 		ring->used_slots--;
 
-		if (meta->is_last_fragment) {
+		if (meta->is_last_fragment && !skip) {
 			/* This is the last scatter-gather
 			 * fragment of the frame. We are done. */
 			break;
 		}
 		slot = next_slot(ring, slot);
+		if (skip > 0)
+			--skip;
 	}
 	if (ring->stopped) {
 		B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
author maintainer
#17 lore raw

PATCH 17/68 b43: N-PHY: use more bits for offset in RSSI calibration

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

commit 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 upstream.

When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example:
offset[j] = 232 - poll_results[j];
formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes:
0xE8 - 0x1 = 0xE7, which is not 231 but -25.

This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c and caused stability regression on some cards, for ex. BCM4322.

---
 drivers/net/wireless/b43/phy_n.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/b43/phy_n.c +2 -2
@@ -1320,7 +1320,7 @@ static void b43_nphy_rev3_rssi_cal(struc
 	u16 clip_off[2] = { 0xFFFF, 0xFFFF };
 
 	u8 vcm_final = 0;
-	s8 offset[4];
+	s32 offset[4];
 	s32 results[8][4] = { };
 	s32 results_min[4] = { };
 	s32 poll_results[4] = { };
@@ -1487,7 +1487,7 @@ static void b43_nphy_rev2_rssi_cal(struc
 	u8 regs_save_radio[2];
 	u16 regs_save_phy[2];
 
-	s8 offset[4];
+	s32 offset[4];
 	u8 core;
 	u8 rail;
 
author maintainer
#18 lore raw

PATCH 18/68 tg3: fix length overflow in VPD firmware parsing

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kees Cook <[email protected]>

commit 715230a44310a8cf66fbfb5a46f9a62a9b2de424 upstream.

Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow.

Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct.

http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf

---
 drivers/net/ethernet/broadcom/tg3.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/tg3.c +5 -2
@@ -13590,8 +13590,11 @@ static void __devinit tg3_read_vpd(struc
 		if (j + len > block_end)
 			goto partno;
 
-		memcpy(tp->fw_ver, &vpd_data[j], len);
-		strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+		if (len >= sizeof(tp->fw_ver))
+			len = sizeof(tp->fw_ver) - 1;
+		memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+		snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+			 &vpd_data[j]);
 	}
 
 partno:
author maintainer
#19 lore raw

PATCH 19/68 iommu/amd: Make sure dma_ops are set for hotplug devices

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <[email protected]>

commit c2a2876e863356b092967ea62bebdb4dd663af80 upstream.

There is a bug introduced with commit 27c2127 that causes devices which are hot unplugged and then hot-replugged to not have per-device dma_ops set. This causes these devices to not function correctly. Fixed with this patch.

---
 drivers/iommu/amd_iommu.c |   20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/iommu/amd_iommu.c +9 -11
@@ -2270,18 +2270,16 @@ static int device_change_notifier(struct
 
 		/* allocate a protection domain if a device is added */
 		dma_domain = find_protection_domain(devid);
-		if (dma_domain)
-			goto out;
-		dma_domain = dma_ops_domain_alloc();
-		if (!dma_domain)
-			goto out;
-		dma_domain->target_dev = devid;
+		if (!dma_domain) {
+			dma_domain = dma_ops_domain_alloc();
+			if (!dma_domain)
+				goto out;
+			dma_domain->target_dev = devid;
 
-		spin_lock_irqsave(&iommu_pd_list_lock, flags);
-		list_add_tail(&dma_domain->list, &iommu_pd_list);
-		spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
-		dev_data = get_dev_data(dev);
+			spin_lock_irqsave(&iommu_pd_list_lock, flags);
+			list_add_tail(&dma_domain->list, &iommu_pd_list);
+			spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+		}
 
 		dev->archdata.dma_ops = &amd_iommu_dma_ops;
 
author maintainer
#20 lore raw

PATCH 20/68 xen/blkback: correctly respond to unknown, non-native requests

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Vrabel <[email protected]>

commit 0e367ae46503cfe7791460c8ba8434a5d60b2bd5 upstream.

If the frontend is using a non-native protocol (e.g., a 64-bit frontend with a 32-bit backend) and it sent an unrecognized request, the request was not translated and the response would have the incorrect ID. This may cause the frontend driver to behave incorrectly or crash.

Since the ID field in the request is always in the same place, regardless of the request type we can get the correct ID and make a valid response (which will report BLKIF_RSP_EOPNOTSUPP).

This bug affected 64-bit SLES 11 guests when using a 32-bit backend. This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES source) and would crash in blkif_int() as the ID in the response would be invalid.

---
 drivers/block/xen-blkback/blkback.c |   31 +++++++++++++++++++++++++++----
 drivers/block/xen-blkback/common.h  |   25 +++++++++++++++++++++++++
 include/xen/interface/io/blkif.h    |   10 ++++++++++
 3 files changed, 62 insertions(+), 4 deletions(-)
drivers/block/xen-blkback/blkback.c +27 -4
@@ -422,6 +422,16 @@ static int dispatch_discard_io(struct xe
 	return err;
 }
 
+static int dispatch_other_io(struct xen_blkif *blkif,
+			     struct blkif_request *req,
+			     struct pending_req *pending_req)
+{
+	free_req(pending_req);
+	make_response(blkif, req->u.other.id, req->operation,
+		      BLKIF_RSP_EOPNOTSUPP);
+	return -EIO;
+}
+
 static void xen_blk_drain_io(struct xen_blkif *blkif)
 {
 	atomic_set(&blkif->drain, 1);
@@ -543,17 +553,30 @@ __do_block_io_op(struct xen_blkif *blkif
 
 		/* Apply all sanity checks to /private copy/ of request. */
 		barrier();
-		if (unlikely(req.operation == BLKIF_OP_DISCARD)) {
+
+		switch (req.operation) {
+		case BLKIF_OP_READ:
+		case BLKIF_OP_WRITE:
+		case BLKIF_OP_WRITE_BARRIER:
+		case BLKIF_OP_FLUSH_DISKCACHE:
+			if (dispatch_rw_block_io(blkif, &req, pending_req))
+				goto done;
+			break;
+		case BLKIF_OP_DISCARD:
 			free_req(pending_req);
 			if (dispatch_discard_io(blkif, &req))
-				break;
-		} else if (dispatch_rw_block_io(blkif, &req, pending_req))
+				goto done;
 			break;
+		default:
+			if (dispatch_other_io(blkif, &req, pending_req))
+				goto done;
+			break;
+		}
 
 		/* Yield point for this unbounded loop. */
 		cond_resched();
 	}
-
+done:
 	return more_to_do;
 }
 
drivers/block/xen-blkback/common.h +25 -0
@@ -76,11 +76,18 @@ struct blkif_x86_32_request_discard {
 	uint64_t       nr_sectors;
 } __attribute__((__packed__));
 
+struct blkif_x86_32_request_other {
+	uint8_t        _pad1;
+	blkif_vdev_t   _pad2;
+	uint64_t       id;           /* private guest value, echoed in resp  */
+} __attribute__((__packed__));
+
 struct blkif_x86_32_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	union {
 		struct blkif_x86_32_request_rw rw;
 		struct blkif_x86_32_request_discard discard;
+		struct blkif_x86_32_request_other other;
 	} u;
 } __attribute__((__packed__));
 
@@ -112,11 +119,19 @@ struct blkif_x86_64_request_discard {
 	uint64_t       nr_sectors;
 } __attribute__((__packed__));
 
+struct blkif_x86_64_request_other {
+	uint8_t        _pad1;
+	blkif_vdev_t   _pad2;
+	uint32_t       _pad3;        /* offsetof(blkif_..,u.discard.id)==8   */
+	uint64_t       id;           /* private guest value, echoed in resp  */
+} __attribute__((__packed__));
+
 struct blkif_x86_64_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	union {
 		struct blkif_x86_64_request_rw rw;
 		struct blkif_x86_64_request_discard discard;
+		struct blkif_x86_64_request_other other;
 	} u;
 } __attribute__((__packed__));
 
@@ -262,6 +277,11 @@ static inline void blkif_get_x86_32_req(
 		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
 		break;
 	default:
+		/*
+		 * Don't know how to translate this op. Only get the
+		 * ID so failure can be reported to the frontend.
+		 */
+		dst->u.other.id = src->u.other.id;
 		break;
 	}
 }
@@ -293,6 +313,11 @@ static inline void blkif_get_x86_64_req(
 		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
 		break;
 	default:
+		/*
+		 * Don't know how to translate this op. Only get the
+		 * ID so failure can be reported to the frontend.
+		 */
+		dst->u.other.id = src->u.other.id;
 		break;
 	}
 }
include/xen/interface/io/blkif.h +10 -0
@@ -138,11 +138,21 @@ struct blkif_request_discard {
 	uint8_t        _pad3;
 } __attribute__((__packed__));
 
+struct blkif_request_other {
+	uint8_t      _pad1;
+	blkif_vdev_t _pad2;        /* only for read/write requests         */
+#ifdef CONFIG_X86_64
+	uint32_t     _pad3;        /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+	uint64_t     id;           /* private guest value, echoed in resp  */
+} __attribute__((__packed__));
+
 struct blkif_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	union {
 		struct blkif_request_rw rw;
 		struct blkif_request_discard discard;
+		struct blkif_request_other other;
 	} u;
 } __attribute__((__packed__));
 
author maintainer
#21 lore raw

PATCH 21/68 xen-blkback: fix dispatch_rw_block_io() error path

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Beulich <[email protected]>

commit 0e5e098ac22dae38f957e951b70d3cf73beff0f7 upstream.

Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions).

Also remove a misleading and a stale (after said commit) comment.

---
 drivers/block/xen-blkback/blkback.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/block/xen-blkback/blkback.c +1 -6
@@ -742,13 +742,7 @@ static int dispatch_rw_block_io(struct x
 		bio->bi_end_io  = end_block_io_op;
 	}
 
-	/*
-	 * We set it one so that the last submit_bio does not have to call
-	 * atomic_inc.
-	 */
 	atomic_set(&pending_req->pendcnt, nbio);
-
-	/* Get a reference count for the disk queue and start sending I/O */
 	blk_start_plug(&plug);
 
 	for (i = 0; i < nbio; i++)
@@ -776,6 +770,7 @@ static int dispatch_rw_block_io(struct x
  fail_put_bio:
 	for (i = 0; i < nbio; i++)
 		bio_put(biolist[i]);
+	atomic_set(&pending_req->pendcnt, 1);
 	__end_block_io_op(pending_req, -EINVAL);
 	msleep(1); /* back off a bit */
 	return -EIO;
author maintainer
#22 lore raw

PATCH 22/68 tty: atmel_serial_probe(): index of atmel_ports[] fix

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pawel Wieczorkiewicz <[email protected]>

commit 503bded92da283b2f31d87e054c4c6d30c3c2340 upstream.

Index of atmel_ports[ATMEL_MAX_UART] should be smaller than ATMEL_MAX_UART.

---
 drivers/tty/serial/atmel_serial.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/tty/serial/atmel_serial.c +5 -6
@@ -159,7 +159,7 @@ struct atmel_uart_port {
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
 
 #ifdef SUPPORT_SYSRQ
 static struct console atmel_console;
@@ -1785,15 +1785,14 @@ static int __devinit atmel_serial_probe(
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
 		 * auto-enumerate it */
-		ret = find_first_zero_bit(&atmel_ports_in_use,
-				sizeof(atmel_ports_in_use));
+		ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
 
-	if (ret > ATMEL_MAX_UART) {
+	if (ret >= ATMEL_MAX_UART) {
 		ret = -ENODEV;
 		goto err;
 	}
 
-	if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+	if (test_and_set_bit(ret, atmel_ports_in_use)) {
 		/* port already in use */
 		ret = -EBUSY;
 		goto err;
@@ -1867,7 +1866,7 @@ static int __devexit atmel_serial_remove
 
 	/* "port" is allocated statically, so we shouldn't free it */
 
-	clear_bit(port->line, &atmel_ports_in_use);
+	clear_bit(port->line, atmel_ports_in_use);
 
 	clk_put(atmel_port->clk);
 
author maintainer
#23 lore raw

PATCH 23/68 usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konstantin Holoborodko <[email protected]>

commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream.

It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them.
https://search.meau.com/?q=FX-USB-AW

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    7 +++++++
 2 files changed, 8 insertions(+)
drivers/usb/serial/ftdi_sio.c +1 -0
@@ -648,6 +648,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
 	{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
 	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+	{ USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
drivers/usb/serial/ftdi_sio_ids.h +7 -0
@@ -584,6 +584,13 @@
 #define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
 
 /*
+ * Mitsubishi Electric Corp. (http://www.meau.com)
+ * Submitted by Konstantin Holoborodko
+ */
+#define MITSUBISHI_VID		0x06D3
+#define MITSUBISHI_FXUSB_PID	0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */
+
+/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
author maintainer
#24 lore raw

PATCH 24/68 vt: synchronize_rcu() under spinlock is not nice...

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Al Viro <[email protected]>

commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream.

vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock.

---
 drivers/tty/vt/vc_screen.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/tty/vt/vc_screen.c +4 -2
@@ -93,7 +93,7 @@ vcs_poll_data_free(struct vcs_poll_data
 static struct vcs_poll_data *
 vcs_poll_data_get(struct file *file)
 {
-	struct vcs_poll_data *poll = file->private_data;
+	struct vcs_poll_data *poll = file->private_data, *kill = NULL;
 
 	if (poll)
 		return poll;
@@ -122,10 +122,12 @@ vcs_poll_data_get(struct file *file)
 		file->private_data = poll;
 	} else {
 		/* someone else raced ahead of us */
-		vcs_poll_data_free(poll);
+		kill = poll;
 		poll = file->private_data;
 	}
 	spin_unlock(&file->f_lock);
+	if (kill)
+		vcs_poll_data_free(kill);
 
 	return poll;
 }
author maintainer
#25 lore raw

PATCH 25/68 mwifiex: cancel cmd timer and free curr_cmd in shutdown process

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bing Zhao <[email protected]>

commit 084c7189acb3f969c855536166042e27f5dd703f upstream.

curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue.

---
 drivers/net/wireless/mwifiex/init.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/net/wireless/mwifiex/init.c +8 -0
@@ -584,6 +584,14 @@ mwifiex_shutdown_drv(struct mwifiex_adap
 		return ret;
 	}
 
+	/* cancel current command */
+	if (adapter->curr_cmd) {
+		dev_warn(adapter->dev, "curr_cmd is still in processing\n");
+		del_timer(&adapter->cmd_timer);
+		mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+		adapter->curr_cmd = NULL;
+	}
+
 	/* shut down mwifiex */
 	dev_dbg(adapter->dev, "info: shutdown mwifiex...\n");
 
author maintainer
#27 lore raw

PATCH 26/68 pnfs-block: removing DM device maybe cause oops when call dev_remove

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: fanchaoting <[email protected]>

commit 4376c94618c26225e69e17b7c91169c45a90b292 upstream.

when pnfs block using device mapper,if umounting later,it maybe cause oops. we apply "1 + sizeof(bl_umount_request)" memory for msg->data, the memory maybe overflow when we do "memcpy(&dataptr [sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))", because the size of bl_msg is more than 1 byte.

---
 fs/nfs/blocklayout/blocklayoutdm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/nfs/blocklayout/blocklayoutdm.c +2 -2
@@ -55,7 +55,8 @@ static void dev_remove(struct net *net,
 
 	bl_pipe_msg.bl_wq = &nn->bl_wq;
 	memset(msg, 0, sizeof(*msg));
-	msg->data = kzalloc(1 + sizeof(bl_umount_request), GFP_NOFS);
+	msg->len = sizeof(bl_msg) + bl_msg.totallen;
+	msg->data = kzalloc(msg->len, GFP_NOFS);
 	if (!msg->data)
 		goto out;
 
@@ -66,7 +67,6 @@ static void dev_remove(struct net *net,
 	memcpy(msg->data, &bl_msg, sizeof(bl_msg));
 	dataptr = (uint8_t *) msg->data;
 	memcpy(&dataptr[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request));
-	msg->len = sizeof(bl_msg) + bl_msg.totallen;
 
 	add_wait_queue(&nn->bl_wq, &wq);
 	if (rpc_queue_upcall(nn->bl_device_pipe, msg) < 0) {
author maintainer
#28 lore raw

PATCH 27/68 net/irda: add missing error path release_sock call

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kees Cook <[email protected]>

commit 896ee0eee6261e30c3623be931c3f621428947df upstream.

This makes sure that release_sock is called for all error conditions in irda_getsockopt.

---
 net/irda/af_irda.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
net/irda/af_irda.c +4 -2
@@ -2584,8 +2584,10 @@ bed:
 				    NULL, NULL, NULL);
 
 		/* Check if the we got some results */
-		if (!self->cachedaddr)
-			return -EAGAIN;		/* Didn't find any devices */
+		if (!self->cachedaddr) {
+			err = -EAGAIN;		/* Didn't find any devices */
+			goto out;
+		}
 		daddr = self->cachedaddr;
 		/* Cleanup */
 		self->cachedaddr = 0;
author maintainer
#29 lore raw

PATCH 28/68 usb: xhci: Fix TRB transfer length macro used for Event TRB.

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vivek Gautam <[email protected]>

commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream.

Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs.

This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci:
Bulk transfer support". This patch will have issues applying to older kernels.

---
 drivers/usb/host/xhci-ring.c |   24 ++++++++++++------------
 drivers/usb/host/xhci.h      |    4 ++++
 2 files changed, 16 insertions(+), 12 deletions(-)
drivers/usb/host/xhci-ring.c +12 -12
@@ -2027,8 +2027,8 @@ static int process_ctrl_td(struct xhci_h
 		if (event_trb != ep_ring->dequeue &&
 				event_trb != td->last_trb)
 			td->urb->actual_length =
-				td->urb->transfer_buffer_length
-				- TRB_LEN(le32_to_cpu(event->transfer_len));
+				td->urb->transfer_buffer_length -
+				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 		else
 			td->urb->actual_length = 0;
 
@@ -2060,7 +2060,7 @@ static int process_ctrl_td(struct xhci_h
 		/* Maybe the event was for the data stage? */
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
-				TRB_LEN(le32_to_cpu(event->transfer_len));
+				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 			xhci_dbg(xhci, "Waiting for status "
 					"stage event\n");
 			return 0;
@@ -2096,7 +2096,7 @@ static int process_isoc_td(struct xhci_h
 	/* handle completion code */
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
-		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
 			frame->status = 0;
 			break;
 		}
@@ -2141,7 +2141,7 @@ static int process_isoc_td(struct xhci_h
 				len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
 		}
 		len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
-			TRB_LEN(le32_to_cpu(event->transfer_len));
+			EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 
 		if (trb_comp_code != COMP_STOP_INVAL) {
 			frame->actual_length = len;
@@ -2199,7 +2199,7 @@ static int process_bulk_intr_td(struct x
 	case COMP_SUCCESS:
 		/* Double check that the HW transferred everything. */
 		if (event_trb != td->last_trb ||
-				TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+		    EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			xhci_warn(xhci, "WARN Successful completion "
 					"on short TX\n");
 			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
@@ -2227,18 +2227,18 @@ static int process_bulk_intr_td(struct x
 				"%d bytes untransferred\n",
 				td->urb->ep->desc.bEndpointAddress,
 				td->urb->transfer_buffer_length,
-				TRB_LEN(le32_to_cpu(event->transfer_len)));
+				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
 	/* Fast path - was this the last TRB in the TD for this URB? */
 	if (event_trb == td->last_trb) {
-		if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
-				TRB_LEN(le32_to_cpu(event->transfer_len));
+				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 			if (td->urb->transfer_buffer_length <
 					td->urb->actual_length) {
 				xhci_warn(xhci, "HC gave bad length "
 						"of %d bytes left\n",
-					  TRB_LEN(le32_to_cpu(event->transfer_len)));
+					  EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
 				td->urb->actual_length = 0;
 				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
 					*status = -EREMOTEIO;
@@ -2280,7 +2280,7 @@ static int process_bulk_intr_td(struct x
 		if (trb_comp_code != COMP_STOP_INVAL)
 			td->urb->actual_length +=
 				TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
-				TRB_LEN(le32_to_cpu(event->transfer_len));
+				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 	}
 
 	return finish_td(xhci, td, event_trb, event, ep, status, false);
@@ -2366,7 +2366,7 @@ static int handle_tx_event(struct xhci_h
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
-		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
 			break;
 		if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
 			trb_comp_code = COMP_SHORT_TX;
drivers/usb/host/xhci.h +4 -0
@@ -968,6 +968,10 @@ struct xhci_transfer_event {
 	__le32	flags;
 };
 
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define	EVENT_TRB_LEN(p)		((p) & 0xffffff)
+
 /** Transfer Event bit fields **/
 #define	TRB_TO_EP_ID(p)	(((p) >> 16) & 0x1f)
 
author maintainer
#30 lore raw

PATCH 29/68 Btrfs: fix race between mmap writes and compression

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Mason <[email protected]>

commit 4adaa611020fa6ac65b0ac8db78276af4ec04e63 upstream.

Btrfs uses page_mkwrite to ensure stable pages during
crc calculations and mmap workloads. We call clear_page_dirty_for_io before we do any crcs, and this forces any application with the file mapped to wait for the crc to finish before it is allowed to change the file.

With compression on, the clear_page_dirty_for_io step is happening after we've compressed the pages. This means the applications might be changing the pages while we are compressing them, and some of those modifications might not hit the disk.

This commit adds the clear_page_dirty_for_io before compression starts and makes sure to redirty the page if we have to fallback to uncompressed IO as well.

---
 fs/btrfs/extent_io.c |   33 +++++++++++++++++++++++++++++++++
 fs/btrfs/extent_io.h |    2 ++
 fs/btrfs/inode.c     |   14 ++++++++++++++
 3 files changed, 49 insertions(+)
fs/btrfs/extent_io.c +33 -0
@@ -1238,6 +1238,39 @@ int unlock_extent(struct extent_io_tree
 				GFP_NOFS);
 }
 
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+	unsigned long index = start >> PAGE_CACHE_SHIFT;
+	unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+	struct page *page;
+
+	while (index <= end_index) {
+		page = find_get_page(inode->i_mapping, index);
+		BUG_ON(!page); /* Pages should be in the extent_io_tree */
+		clear_page_dirty_for_io(page);
+		page_cache_release(page);
+		index++;
+	}
+	return 0;
+}
+
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+	unsigned long index = start >> PAGE_CACHE_SHIFT;
+	unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+	struct page *page;
+
+	while (index <= end_index) {
+		page = find_get_page(inode->i_mapping, index);
+		BUG_ON(!page); /* Pages should be in the extent_io_tree */
+		account_page_redirty(page);
+		__set_page_dirty_nobuffers(page);
+		page_cache_release(page);
+		index++;
+	}
+	return 0;
+}
+
 /*
  * helper function to set both pages and extents in the tree writeback
  */
fs/btrfs/extent_io.h +2 -0
@@ -312,6 +312,8 @@ int map_private_extent_buffer(struct ext
 		      unsigned long *map_len);
 int extent_range_uptodate(struct extent_io_tree *tree,
 			  u64 start, u64 end);
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end);
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end);
 int extent_clear_unlock_delalloc(struct inode *inode,
 				struct extent_io_tree *tree,
 				u64 start, u64 end, struct page *locked_page,
fs/btrfs/inode.c +14 -0
@@ -349,6 +349,7 @@ static noinline int compress_file_range(
 	int i;
 	int will_compress;
 	int compress_type = root->fs_info->compress_type;
+	int redirty = 0;
 
 	/* if this is a small write inside eof, kick off a defrag */
 	if ((end - start + 1) < 16 * 1024 &&
@@ -411,6 +412,17 @@ again:
 		if (BTRFS_I(inode)->force_compress)
 			compress_type = BTRFS_I(inode)->force_compress;
 
+		/*
+		 * we need to call clear_page_dirty_for_io on each
+		 * page in the range.  Otherwise applications with the file
+		 * mmap'd can wander in and change the page contents while
+		 * we are compressing them.
+		 *
+		 * If the compression fails for any reason, we set the pages
+		 * dirty again later on.
+		 */
+		extent_range_clear_dirty_for_io(inode, start, end);
+		redirty = 1;
 		ret = btrfs_compress_pages(compress_type,
 					   inode->i_mapping, start,
 					   total_compressed, pages,
@@ -552,6 +564,8 @@ cleanup_and_bail_uncompressed:
 			__set_page_dirty_nobuffers(locked_page);
 			/* unlocked later on in the async handlers */
 		}
+		if (redirty)
+			extent_range_redirty_for_io(inode, start, end);
 		add_async_extent(async_cow, start, end - start + 1,
 				 0, NULL, 0, BTRFS_COMPRESS_NONE);
 		*num_added += 1;
author maintainer
#31 lore raw

PATCH 30/68 Btrfs: limit the global reserve to 512mb

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josef Bacik <[email protected]>

commit fdf30d1c1b386e1b73116cc7e0fb14e962b763b0 upstream.

A user reported a problem where he was getting early ENOSPC with hundreds of gigs of free data space and 6 gigs of free metadata space. This is because the global block reserve was taking up the entire free metadata space. This is ridiculous, we have infrastructure in place to throttle if we start using too much of the global reserve, so instead of letting it get this huge just limit it to 512mb so that users can still get work done. This allowed the user to complete his rsync without issues. Thanks

---
 fs/btrfs/extent-tree.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/extent-tree.c +1 -1
@@ -4217,7 +4217,7 @@ static void update_global_block_rsv(stru
 	spin_lock(&sinfo->lock);
 	spin_lock(&block_rsv->lock);
 
-	block_rsv->size = num_bytes;
+	block_rsv->size = min_t(u64, num_bytes, 512 * 1024 * 1024);
 
 	num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
 		    sinfo->bytes_reserved + sinfo->bytes_readonly +
author maintainer
#32 lore raw

PATCH 31/68 Btrfs: dont drop path when printing out tree errors in scrub

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josef Bacik <[email protected]>

commit d8fe29e9dea8d7d61fd140d8779326856478fc62 upstream.

A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks,

---
 fs/btrfs/scrub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/btrfs/scrub.c +2 -1
@@ -383,7 +383,6 @@ static void scrub_print_warning(const ch
 	eb = path->nodes[0];
 	ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
 	item_size = btrfs_item_size_nr(eb, path->slots[0]);
-	btrfs_release_path(path);
 
 	if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
 		do {
@@ -398,7 +397,9 @@ static void scrub_print_warning(const ch
 				ret < 0 ? -1 : ref_level,
 				ret < 0 ? -1 : ref_root);
 		} while (ret != 1);
+		btrfs_release_path(path);
 	} else {
+		btrfs_release_path(path);
 		swarn.path = path;
 		iterate_extent_inodes(fs_info, found_key.objectid,
 					extent_item_pos, 1,
author maintainer
#33 lore raw

PATCH 32/68 usb: gadget: udc-core: fix a regression during gadget driver unbinding

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit 511f3c5326eabe1ece35202a404c24c0aeacc246 upstream.

This patch (as1666) fixes a regression in the UDC core. The core takes care of unbinding gadget drivers, and it does the unbinding before telling the UDC driver to turn off the controller hardware. When the call to the udc_stop callback is made, the gadget no longer has a driver. The callback routine should not be invoked with a pointer to the old driver; doing so can cause problems (such as use-after-free accesses in net2280).

This patch should be applied, with appropriate context changes, to all the stable kernels going back to 3.1.

---
 drivers/usb/gadget/udc-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/udc-core.c +1 -1
@@ -265,7 +265,7 @@ static void usb_gadget_remove_driver(str
 		udc->driver->disconnect(udc->gadget);
 		usb_gadget_disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
-		usb_gadget_udc_stop(udc->gadget, udc->driver);
+		usb_gadget_udc_stop(udc->gadget, NULL);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
 	}
author maintainer
#34 lore raw

PATCH 33/68 loop: prevent bdev freeing while device in use

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anatol Pomozov <[email protected]>

commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream.

struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d".

But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
  bd_set_size+0x10/0xa0
  loop_clr_fd+0x1f8/0x420 [loop]
  lo_ioctl+0x200/0x7e0 [loop]
  lo_compat_ioctl+0x47/0xe0 [loop]
  compat_blkdev_ioctl+0x341/0x1290
  do_filp_open+0x42/0xa0
  compat_sys_ioctl+0xc1/0xf20
  do_sys_open+0x16e/0x1d0
  sysenter_dispatch+0x7/0x1a

To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd().

The issue is reprodusible on current Linus head and v3.3. Here is the test:

dd if=/dev/zero of=loop.file bs=1M count=1
while [ true ]; do
losetup /dev/loop0 loop.file
echo 2 > /proc/sys/vm/drop_caches
losetup -d /dev/loop0
done

[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO.

loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ]

---
 drivers/block/loop.c |    9 ++++++++-
 fs/block_dev.c       |    1 +
 2 files changed, 9 insertions(+), 1 deletion(-)
drivers/block/loop.c +8 -1
@@ -908,6 +908,11 @@ static int loop_set_fd(struct loop_devic
 		lo->lo_flags |= LO_FLAGS_PARTSCAN;
 	if (lo->lo_flags & LO_FLAGS_PARTSCAN)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
+
+	/* Grab the block_device to prevent its destruction after we
+	 * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev).
+	 */
+	bdgrab(bdev);
 	return 0;
 
 out_clr:
@@ -1004,8 +1009,10 @@ static int loop_clr_fd(struct loop_devic
 	memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
 	memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
 	memset(lo->lo_file_name, 0, LO_NAME_SIZE);
-	if (bdev)
+	if (bdev) {
+		bdput(bdev);
 		invalidate_bdev(bdev);
+	}
 	set_capacity(lo->lo_disk, 0);
 	loop_sysfs_exit(lo);
 	if (bdev) {
fs/block_dev.c +1 -0
@@ -604,6 +604,7 @@ struct block_device *bdgrab(struct block
 	ihold(bdev->bd_inode);
 	return bdev;
 }
+EXPORT_SYMBOL(bdgrab);
 
 long nr_blockdev_pages(void)
 {
author maintainer
#35 lore raw

PATCH 34/68 ARM: cns3xxx: fix mapping of private memory region

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mac Lin <[email protected]>

commit a3d9052c6296ad3398d3ad649c3c682c3e7ecfa6 upstream.

Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the Cavium CNS3xxx cannot boot anymore.

This is caused by the pre-defined iotable mappings is not in the vmalloc region. This patch move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region.

---
 arch/arm/mach-cns3xxx/core.c                 |   16 +++-------------
 arch/arm/mach-cns3xxx/include/mach/cns3xxx.h |   16 ++++++++--------
 2 files changed, 11 insertions(+), 21 deletions(-)
arch/arm/mach-cns3xxx/core.c +3 -13
@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +8 -8
@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
author maintainer
#36 lore raw

PATCH 35/68 nfsd4: reject "negative" acl lengths

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <[email protected]>

commit 64a817cfbded8674f345d1117b117f942a351a69 upstream.

Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here.

The symptom seen was a warning when we attempt to a kmalloc with an excessive size.

---
 fs/nfsd/nfs4xdr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nfsd/nfs4xdr.c +1 -1
@@ -263,7 +263,7 @@ nfsd4_decode_fattr(struct nfsd4_compound
 		iattr->ia_valid |= ATTR_SIZE;
 	}
 	if (bmval[0] & FATTR4_WORD0_ACL) {
-		int nace;
+		u32 nace;
 		struct nfs4_ace *ace;
 
 		READ_BUF(4); len += 4;
author maintainer
#37 lore raw

PATCH 36/68 drm/i915: Dont clobber crtc->fb when queue_flip fails

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <[email protected]>

commit 4a35f83b2b7c6aae3fc0d1c4554fdc99dc33ad07 upstream.

Restore crtc->fb to the old framebuffer if queue_flip fails.

While at it, kill the pointless intel_fb temp variable.

v2: Update crtc->fb before queue_flip and restore it back
after a failure.

Backported for 3.4-stable. Adjusted context only.

---
 drivers/gpu/drm/i915/intel_display.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +4 -7
@@ -7567,8 +7567,8 @@ static int intel_crtc_page_flip(struct d
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_framebuffer *intel_fb;
-	struct drm_i915_gem_object *obj;
+	struct drm_framebuffer *old_fb = crtc->fb;
+	struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
 	unsigned long flags;
@@ -7580,8 +7580,7 @@ static int intel_crtc_page_flip(struct d
 
 	work->event = event;
 	work->dev = crtc->dev;
-	intel_fb = to_intel_framebuffer(crtc->fb);
-	work->old_fb_obj = intel_fb->obj;
+	work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
 	INIT_WORK(&work->work, intel_unpin_work_fn);
 
 	ret = drm_vblank_get(dev, intel_crtc->pipe);
@@ -7601,9 +7600,6 @@ static int intel_crtc_page_flip(struct d
 	intel_crtc->unpin_work = work;
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
-	intel_fb = to_intel_framebuffer(fb);
-	obj = intel_fb->obj;
-
 	mutex_lock(&dev->struct_mutex);
 
 	/* Reference the objects for the scheduled work. */
@@ -7634,6 +7630,7 @@ static int intel_crtc_page_flip(struct d
 
 cleanup_pending:
 	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
+	crtc->fb = old_fb;
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
author maintainer
#38 lore raw

PATCH 37/68 Btrfs: fix space leak when we fail to reserve metadata space

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josef Bacik <[email protected]>

commit f4881bc7a83eff263789dd524b7c269d138d4af5 upstream.

Dave reported a warning when running xfstest 275. We have been leaking delalloc metadata space when our reservations fail. This is because we were improperly calculating how much space to free for our checksum reservations. The problem is we would sometimes free up space that had already been freed in another thread and we would end up with negative usage for the delalloc space. This patch fixes the problem by calculating how much space the other threads would have already freed, and then calculate how much space we need to free had we not done the reservation at all, and then freeing any excess space. This makes xfstests 275 no longer have leaked space. Thanks

---
 fs/btrfs/extent-tree.c |   47 +++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 6 deletions(-)
fs/btrfs/extent-tree.c +41 -6
@@ -4486,14 +4486,49 @@ int btrfs_delalloc_reserve_metadata(stru
 		 * If the inodes csum_bytes is the same as the original
 		 * csum_bytes then we know we haven't raced with any free()ers
 		 * so we can just reduce our inodes csum bytes and carry on.
-		 * Otherwise we have to do the normal free thing to account for
-		 * the case that the free side didn't free up its reserve
-		 * because of this outstanding reservation.
 		 */
-		if (BTRFS_I(inode)->csum_bytes == csum_bytes)
+		if (BTRFS_I(inode)->csum_bytes == csum_bytes) {
 			calc_csum_metadata_size(inode, num_bytes, 0);
-		else
-			to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+		} else {
+			u64 orig_csum_bytes = BTRFS_I(inode)->csum_bytes;
+			u64 bytes;
+
+			/*
+			 * This is tricky, but first we need to figure out how much we
+			 * free'd from any free-ers that occured during this
+			 * reservation, so we reset ->csum_bytes to the csum_bytes
+			 * before we dropped our lock, and then call the free for the
+			 * number of bytes that were freed while we were trying our
+			 * reservation.
+			 */
+			bytes = csum_bytes - BTRFS_I(inode)->csum_bytes;
+			BTRFS_I(inode)->csum_bytes = csum_bytes;
+			to_free = calc_csum_metadata_size(inode, bytes, 0);
+
+
+			/*
+			 * Now we need to see how much we would have freed had we not
+			 * been making this reservation and our ->csum_bytes were not
+			 * artificially inflated.
+			 */
+			BTRFS_I(inode)->csum_bytes = csum_bytes - num_bytes;
+			bytes = csum_bytes - orig_csum_bytes;
+			bytes = calc_csum_metadata_size(inode, bytes, 0);
+
+			/*
+			 * Now reset ->csum_bytes to what it should be.  If bytes is
+			 * more than to_free then we would have free'd more space had we
+			 * not had an artificially high ->csum_bytes, so we need to free
+			 * the remainder.  If bytes is the same or less then we don't
+			 * need to do anything, the other free-ers did the correct
+			 * thing.
+			 */
+			BTRFS_I(inode)->csum_bytes = orig_csum_bytes - num_bytes;
+			if (bytes > to_free)
+				to_free = bytes - to_free;
+			else
+				to_free = 0;
+		}
 		spin_unlock(&BTRFS_I(inode)->lock);
 		if (dropped)
 			to_free += btrfs_calc_trans_metadata_size(root, dropped);
author maintainer
#39 lore raw

PATCH 38/68 efivars: explicitly calculate length of VariableName

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matt Fleming <[email protected]>

commit ec50bd32f1672d38ddce10fb1841cbfda89cfe9a upstream.

It's not wise to assume VariableNameSize represents the length of VariableName, as not all firmware updates VariableNameSize in the same way (some don't update it at all if EFI_SUCCESS is returned). There are even implementations out there that update VariableNameSize with values that are both larger than the string returned in VariableName and smaller than the buffer passed to GetNextVariableName(), which resulted in the following bug report from Michael Schroeder,

Quoted 8 lines

On HP z220 system (firmware version 1.54), some EFI variables are incorrectly named :

ls -d /sys/firmware/efi/vars/*8be4d* | grep -v -- -8be returns /sys/firmware/efi/vars/dbxDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/vars/KEKDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/vars/SecureBoot-pport8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/vars/SetupMode-Information8be4df61-93ca-11d2-aa0d-00e098032b8c

The issue here is that because we blindly use VariableNameSize without verifying its value, we can potentially read garbage values from the buffer containing VariableName if VariableNameSize is larger than the length of VariableName.

Since VariableName is a string, we can calculate its size by searching for the terminating NULL character.

[Backported for 3.8-stable. Removed workqueue code added in a93bc0c 3.9-rc1.]

---
 drivers/firmware/efivars.c |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
drivers/firmware/efivars.c +27 -0
@@ -943,6 +943,31 @@ static ssize_t efivar_delete(struct file
 }
 
 /*
+ * Returns the size of variable_name, in bytes, including the
+ * terminating NULL character, or variable_name_size if no NULL
+ * character is found among the first variable_name_size bytes.
+ */
+static unsigned long var_name_strnsize(efi_char16_t *variable_name,
+				       unsigned long variable_name_size)
+{
+	unsigned long len;
+	efi_char16_t c;
+
+	/*
+	 * The variable name is, by definition, a NULL-terminated
+	 * string, so make absolutely sure that variable_name_size is
+	 * the value we expect it to be. If not, return the real size.
+	 */
+	for (len = 2; len <= variable_name_size; len += sizeof(c)) {
+		c = variable_name[(len / sizeof(c)) - 1];
+		if (!c)
+			break;
+	}
+
+	return min(len, variable_name_size);
+}
+
+/*
  * Let's not leave out systab information that snuck into
  * the efivars driver
  */
@@ -1169,6 +1194,8 @@ int register_efivars(struct efivars *efi
 						&vendor_guid);
 		switch (status) {
 		case EFI_SUCCESS:
+			variable_name_size = var_name_strnsize(variable_name,
+							       variable_name_size);
 			efivar_create_sysfs_entry(efivars,
 						  variable_name_size,
 						  variable_name,
author maintainer
#40 lore raw

PATCH 39/68 efivars: Handle duplicate names from get_next_variable()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matt Fleming <[email protected]>

commit e971318bbed610e28bb3fde9d548e6aaf0a6b02e upstream.

Some firmware exhibits a bug where the same VariableName and VendorGuid values are returned on multiple invocations of GetNextVariableName(). See,

    https://bugzilla.kernel.org/show_bug.cgi?id=47631

As a consequence of such a bug, Andre reports hitting the following WARN_ON() in the sysfs code after updating the BIOS on his, "Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F19e 11/21/2012)" machine,

[    0.581554] EFI Variables Facility v0.08 2004-May-17
[    0.584914] ------------[ cut here ]------------
[    0.585639] WARNING: at /home/andre/linux/fs/sysfs/dir.c:536 sysfs_add_one+0xd4/0x100()
[    0.586381] Hardware name: To be filled by O.E.M.
[    0.587123] sysfs: cannot create duplicate filename '/firmware/efi/vars/SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8'
[    0.588694] Modules linked in:
[    0.589484] Pid: 1, comm: swapper/0 Not tainted 3.8.0+ #7
[    0.590280] Call Trace:
[    0.591066]  [<ffffffff81208954>] ? sysfs_add_one+0xd4/0x100
[    0.591861]  [<ffffffff810587bf>] warn_slowpath_common+0x7f/0xc0
[    0.592650]  [<ffffffff810588bc>] warn_slowpath_fmt+0x4c/0x50
[    0.593429]  [<ffffffff8134dd85>] ? strlcat+0x65/0x80
[    0.594203]  [<ffffffff81208954>] sysfs_add_one+0xd4/0x100
[    0.594979]  [<ffffffff81208b78>] create_dir+0x78/0xd0
[    0.595753]  [<ffffffff81208ec6>] sysfs_create_dir+0x86/0xe0
[    0.596532]  [<ffffffff81347e4c>] kobject_add_internal+0x9c/0x220
[    0.597310]  [<ffffffff81348307>] kobject_init_and_add+0x67/0x90
[    0.598083]  [<ffffffff81584a71>] ? efivar_create_sysfs_entry+0x61/0x1c0
[    0.598859]  [<ffffffff81584b2b>] efivar_create_sysfs_entry+0x11b/0x1c0
[    0.599631]  [<ffffffff8158517e>] register_efivars+0xde/0x420
[    0.600395]  [<ffffffff81d430a7>] ? edd_init+0x2f5/0x2f5
[    0.601150]  [<ffffffff81d4315f>] efivars_init+0xb8/0x104
[    0.601903]  [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
[    0.602659]  [<ffffffff81d05d80>] kernel_init_freeable+0x13e/0x1c6
[    0.603418]  [<ffffffff81d05586>] ? loglevel+0x31/0x31
[    0.604183]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.604936]  [<ffffffff816a653e>] kernel_init+0xe/0xf0
[    0.605681]  [<ffffffff816ce7ec>] ret_from_fork+0x7c/0xb0
[    0.606414]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.607143] ---[ end trace 1609741ab737eb29 ]---

There's not much we can do to work around and keep traversing the variable list once we hit this firmware bug. Our only solution is to terminate the loop because, as Lingzhu reports, some machines get stuck when they encounter duplicate names,

Quoted 5 lines

I had an IBM System x3100 M4 and x3850 X5 on which kernel would get stuck in infinite loop creating duplicate sysfs files because, for some reason, there are several duplicate boot entries in nvram getting GetNextVariableName into a circle of iteration (with period > 2).

Also disable the workqueue, as efivar_update_sysfs_entries() uses GetNextVariableName() to figure out which variables have been created since the last iteration. That algorithm isn't going to work if GetNextVariableName() returns duplicates. Note that we don't disable EFI variable creation completely on the affected machines, it's just that any pstore dump-* files won't appear in sysfs until the next boot.

[Backported for 3.4-stable. Removed code related to pstore workqueue but pulled in helper function variable_is_present from a93bc0c; Moved the definition of __efivars to the top for being referenced in variable_is_present.]

---
 drivers/firmware/efivars.c |   66 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 3 deletions(-)
drivers/firmware/efivars.c +63 -3
@@ -122,6 +122,9 @@ struct efivar_attribute {
 	ssize_t (*store)(struct efivar_entry *entry, const char *buf, size_t count);
 };
 
+static struct efivars __efivars;
+static struct efivar_operations ops;
+
 #define PSTORE_EFI_ATTRIBUTES \
 	(EFI_VARIABLE_NON_VOLATILE | \
 	 EFI_VARIABLE_BOOTSERVICE_ACCESS | \
@@ -942,6 +945,28 @@ static ssize_t efivar_delete(struct file
 	return count;
 }
 
+static bool variable_is_present(efi_char16_t *variable_name, efi_guid_t *vendor)
+{
+	struct efivar_entry *entry, *n;
+	struct efivars *efivars = &__efivars;
+	unsigned long strsize1, strsize2;
+	bool found = false;
+
+	strsize1 = utf16_strsize(variable_name, 1024);
+	list_for_each_entry_safe(entry, n, &efivars->list, list) {
+		strsize2 = utf16_strsize(entry->var.VariableName, 1024);
+		if (strsize1 == strsize2 &&
+			!memcmp(variable_name, &(entry->var.VariableName),
+				strsize2) &&
+			!efi_guidcmp(entry->var.VendorGuid,
+				*vendor)) {
+			found = true;
+			break;
+		}
+	}
+	return found;
+}
+
 /*
  * Returns the size of variable_name, in bytes, including the
  * terminating NULL character, or variable_name_size if no NULL
@@ -1154,6 +1179,28 @@ void unregister_efivars(struct efivars *
 }
 EXPORT_SYMBOL_GPL(unregister_efivars);
 
+/*
+ * Print a warning when duplicate EFI variables are encountered and
+ * disable the sysfs workqueue since the firmware is buggy.
+ */
+static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
+			     unsigned long len16)
+{
+	size_t i, len8 = len16 / sizeof(efi_char16_t);
+	char *s8;
+
+	s8 = kzalloc(len8, GFP_KERNEL);
+	if (!s8)
+		return;
+
+	for (i = 0; i < len8; i++)
+		s8[i] = s16[i];
+
+	printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
+	       s8, vendor_guid);
+	kfree(s8);
+}
+
 int register_efivars(struct efivars *efivars,
 		     const struct efivar_operations *ops,
 		     struct kobject *parent_kobj)
@@ -1196,6 +1243,22 @@ int register_efivars(struct efivars *efi
 		case EFI_SUCCESS:
 			variable_name_size = var_name_strnsize(variable_name,
 							       variable_name_size);
+
+			/*
+			 * Some firmware implementations return the
+			 * same variable name on multiple calls to
+			 * get_next_variable(). Terminate the loop
+			 * immediately as there is no guarantee that
+			 * we'll ever see a different variable name,
+			 * and may end up looping here forever.
+			 */
+			if (variable_is_present(variable_name, &vendor_guid)) {
+				dup_variable_bug(variable_name, &vendor_guid,
+						 variable_name_size);
+				status = EFI_NOT_FOUND;
+				break;
+			}
+
 			efivar_create_sysfs_entry(efivars,
 						  variable_name_size,
 						  variable_name,
@@ -1232,9 +1295,6 @@ out:
 }
 EXPORT_SYMBOL_GPL(register_efivars);
 
-static struct efivars __efivars;
-static struct efivar_operations ops;
-
 /*
  * For now we register the efi subsystem with the firmware subsystem
  * and the vars subsystem with the efi subsystem.  In the future, it
author maintainer
#41 lore raw

PATCH 40/68 ext4: convert number of blocks to clusters properly

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <[email protected]>

commit 810da240f221d64bf90020f25941b05b378186fe upstream.

We're using macro EXT4_B2C() to convert number of blocks to number of clusters for bigalloc file systems. However, we should be using EXT4_NUM_B2C().

---
 fs/ext4/balloc.c  |    2 +-
 fs/ext4/mballoc.c |    8 ++++----
 fs/ext4/resize.c  |    6 +++---
 3 files changed, 8 insertions(+), 8 deletions(-)
fs/ext4/balloc.c +1 -1
@@ -600,7 +600,7 @@ ext4_fsblk_t ext4_count_free_clusters(st
 	brelse(bitmap_bh);
 	printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
 	       ", computed = %llu, %llu\n",
-	       EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)),
+	       EXT4_NUM_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)),
 	       desc_count, bitmap_count);
 	return bitmap_count;
 #else
fs/ext4/mballoc.c +4 -4
@@ -3433,7 +3433,7 @@ ext4_mb_new_inode_pa(struct ext4_allocat
 			win = offs;
 
 		ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical -
-			EXT4_B2C(sbi, win);
+			EXT4_NUM_B2C(sbi, win);
 		BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical);
 		BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len);
 	}
@@ -4577,7 +4577,7 @@ do_more:
 			EXT4_BLOCKS_PER_GROUP(sb);
 		count -= overflow;
 	}
-	count_clusters = EXT4_B2C(sbi, count);
+	count_clusters = EXT4_NUM_B2C(sbi, count);
 	bitmap_bh = ext4_read_block_bitmap(sb, block_group);
 	if (!bitmap_bh) {
 		err = -EIO;
@@ -4808,11 +4808,11 @@ int ext4_group_add_blocks(handle_t *hand
 	desc->bg_checksum = ext4_group_desc_csum(sbi, block_group, desc);
 	ext4_unlock_group(sb, block_group);
 	percpu_counter_add(&sbi->s_freeclusters_counter,
-			   EXT4_B2C(sbi, blocks_freed));
+			   EXT4_NUM_B2C(sbi, blocks_freed));
 
 	if (sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
-		atomic_add(EXT4_B2C(sbi, blocks_freed),
+		atomic_add(EXT4_NUM_B2C(sbi, blocks_freed),
 			   &sbi->s_flex_groups[flex_group].free_clusters);
 	}
 
fs/ext4/resize.c +3 -3
@@ -1112,7 +1112,7 @@ static int ext4_setup_new_descs(handle_t
 		ext4_inode_bitmap_set(sb, gdp, group_data->inode_bitmap);
 		ext4_inode_table_set(sb, gdp, group_data->inode_table);
 		ext4_free_group_clusters_set(sb, gdp,
-					     EXT4_B2C(sbi, group_data->free_blocks_count));
+			EXT4_NUM_B2C(sbi, group_data->free_blocks_count));
 		ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb));
 		gdp->bg_flags = cpu_to_le16(*bg_flags);
 		gdp->bg_checksum = ext4_group_desc_csum(sbi, group, gdp);
@@ -1210,7 +1210,7 @@ static void ext4_update_super(struct sup
 
 	/* Update the free space counts */
 	percpu_counter_add(&sbi->s_freeclusters_counter,
-			   EXT4_B2C(sbi, free_blocks));
+			   EXT4_NUM_B2C(sbi, free_blocks));
 	percpu_counter_add(&sbi->s_freeinodes_counter,
 			   EXT4_INODES_PER_GROUP(sb) * flex_gd->count);
 
@@ -1219,7 +1219,7 @@ static void ext4_update_super(struct sup
 	    sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group;
 		flex_group = ext4_flex_group(sbi, group_data[0].group);
-		atomic_add(EXT4_B2C(sbi, free_blocks),
+		atomic_add(EXT4_NUM_B2C(sbi, free_blocks),
 			   &sbi->s_flex_groups[flex_group].free_clusters);
 		atomic_add(EXT4_INODES_PER_GROUP(sb) * flex_gd->count,
 			   &sbi->s_flex_groups[flex_group].free_inodes);
author maintainer
#42 lore raw

PATCH 41/68 ext4: use atomic64_t for the per-flexbg free_clusters count

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <[email protected]>

commit 90ba983f6889e65a3b506b30dc606aa9d1d46cd2 upstream.

A user who was using a 8TB+ file system and with a very large flexbg size (> 65536) could cause the atomic_t used in the struct flex_groups to overflow. This was detected by PaX security patchset:

http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551

This bug was introduced in commit 9f24e4208f7e, so it's been around since 2.6.30. :-(

Fix this by using an atomic64_t for struct orlav_stats's free_clusters.

---
 fs/ext4/ext4.h    |    6 +++---
 fs/ext4/ialloc.c  |    4 ++--
 fs/ext4/mballoc.c |   12 ++++++------
 fs/ext4/resize.c  |    4 ++--
 fs/ext4/super.c   |    4 ++--
 5 files changed, 15 insertions(+), 15 deletions(-)
fs/ext4/ext4.h +3 -3
@@ -316,9 +316,9 @@ struct ext4_group_desc
  */
 
 struct flex_groups {
-	atomic_t free_inodes;
-	atomic_t free_clusters;
-	atomic_t used_dirs;
+	atomic64_t	free_clusters;
+	atomic_t	free_inodes;
+	atomic_t	used_dirs;
 };
 
 #define EXT4_BG_INODE_UNINIT	0x0001 /* Inode table/bitmap not in use */
fs/ext4/ialloc.c +2 -2
@@ -305,8 +305,8 @@ error_return:
 }
 
 struct orlov_stats {
+	__u64 free_clusters;
 	__u32 free_inodes;
-	__u32 free_clusters;
 	__u32 used_dirs;
 };
 
@@ -323,7 +323,7 @@ static void get_orlov_stats(struct super
 
 	if (flex_size > 1) {
 		stats->free_inodes = atomic_read(&flex_group[g].free_inodes);
-		stats->free_clusters = atomic_read(&flex_group[g].free_clusters);
+		stats->free_clusters = atomic64_read(&flex_group[g].free_clusters);
 		stats->used_dirs = atomic_read(&flex_group[g].used_dirs);
 		return;
 	}
fs/ext4/mballoc.c +6 -6
@@ -2813,8 +2813,8 @@ ext4_mb_mark_diskspace_used(struct ext4_
 	if (sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group = ext4_flex_group(sbi,
 							  ac->ac_b_ex.fe_group);
-		atomic_sub(ac->ac_b_ex.fe_len,
-			   &sbi->s_flex_groups[flex_group].free_clusters);
+		atomic64_sub(ac->ac_b_ex.fe_len,
+			     &sbi->s_flex_groups[flex_group].free_clusters);
 	}
 
 	err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
@@ -4667,8 +4667,8 @@ do_more:
 
 	if (sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
-		atomic_add(count_clusters,
-			   &sbi->s_flex_groups[flex_group].free_clusters);
+		atomic64_add(count_clusters,
+			     &sbi->s_flex_groups[flex_group].free_clusters);
 	}
 
 	ext4_mb_unload_buddy(&e4b);
@@ -4812,8 +4812,8 @@ int ext4_group_add_blocks(handle_t *hand
 
 	if (sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
-		atomic_add(EXT4_NUM_B2C(sbi, blocks_freed),
-			   &sbi->s_flex_groups[flex_group].free_clusters);
+		atomic64_add(EXT4_NUM_B2C(sbi, blocks_freed),
+			     &sbi->s_flex_groups[flex_group].free_clusters);
 	}
 
 	ext4_mb_unload_buddy(&e4b);
fs/ext4/resize.c +2 -2
@@ -1219,8 +1219,8 @@ static void ext4_update_super(struct sup
 	    sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group;
 		flex_group = ext4_flex_group(sbi, group_data[0].group);
-		atomic_add(EXT4_NUM_B2C(sbi, free_blocks),
-			   &sbi->s_flex_groups[flex_group].free_clusters);
+		atomic64_add(EXT4_NUM_B2C(sbi, free_blocks),
+			     &sbi->s_flex_groups[flex_group].free_clusters);
 		atomic_add(EXT4_INODES_PER_GROUP(sb) * flex_gd->count,
 			   &sbi->s_flex_groups[flex_group].free_inodes);
 	}
fs/ext4/super.c +2 -2
@@ -1907,8 +1907,8 @@ static int ext4_fill_flex_info(struct su
 		flex_group = ext4_flex_group(sbi, i);
 		atomic_add(ext4_free_inodes_count(sb, gdp),
 			   &sbi->s_flex_groups[flex_group].free_inodes);
-		atomic_add(ext4_free_group_clusters(sb, gdp),
-			   &sbi->s_flex_groups[flex_group].free_clusters);
+		atomic64_add(ext4_free_group_clusters(sb, gdp),
+			     &sbi->s_flex_groups[flex_group].free_clusters);
 		atomic_add(ext4_used_dirs_count(sb, gdp),
 			   &sbi->s_flex_groups[flex_group].used_dirs);
 	}
author maintainer
#43 lore raw

PATCH 42/68 tracing: Protect tracer flags with trace_types_lock

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <[email protected]>

commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream.

Seems that the tracer flags have never been protected from synchronous writes. Luckily, admins don't usually modify the tracing flags via two different tasks. But if scripts were to be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing to also protect the flags being set.

[Backported for 3.4, 3.0-stable. Moved return to after unlock.]

---
 kernel/trace/trace.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
kernel/trace/trace.c +12 -7
@@ -2768,7 +2768,7 @@ tracing_trace_options_write(struct file
 	char buf[64];
 	char *cmp;
 	int neg = 0;
-	int ret;
+	int ret = 0;
 	int i;
 
 	if (cnt >= sizeof(buf))
@@ -2785,6 +2785,8 @@ tracing_trace_options_write(struct file
 		cmp += 2;
 	}
 
+	mutex_lock(&trace_types_lock);
+
 	for (i = 0; trace_options[i]; i++) {
 		if (strcmp(cmp, trace_options[i]) == 0) {
 			set_tracer_flags(1 << i, !neg);
@@ -2793,13 +2795,13 @@ tracing_trace_options_write(struct file
 	}
 
 	/* If no option could be set, test the specific tracer options */
-	if (!trace_options[i]) {
-		mutex_lock(&trace_types_lock);
+	if (!trace_options[i])
 		ret = set_tracer_option(current_trace, cmp, neg);
-		mutex_unlock(&trace_types_lock);
-		if (ret)
-			return ret;
-	}
+
+	mutex_unlock(&trace_types_lock);
+
+	if (ret)
+		return ret;
 
 	*ppos += cnt;
 
@@ -4486,7 +4488,10 @@ trace_options_core_write(struct file *fi
 
 	if (val != 0 && val != 1)
 		return -EINVAL;
+
+	mutex_lock(&trace_types_lock);
 	set_tracer_flags(1 << index, val);
+	mutex_unlock(&trace_types_lock);
 
 	*ppos += cnt;
 
author maintainer
#44 lore raw

PATCH 43/68 tracing: Prevent buffer overwrite disabled for latency tracers

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <[email protected]>

commit 613f04a0f51e6e68ac6fe571ab79da3c0a5eb4da upstream.

The latency tracers require the buffers to be in overwrite mode, otherwise they get screwed up. Force the buffers to stay in overwrite mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow the tracers to see what flags are being changed, and also be able to prevent the change from happing.

[Backported for 3.4-stable. Re-added current_trace NULL checks; removed allocated_snapshot field; adapted to tracing_trace_options_write without trace_set_options.]

---
 kernel/trace/trace.c              |   35 +++++++++++++++++++++++++++++------
 kernel/trace/trace.h              |    7 +++++++
 kernel/trace/trace_irqsoff.c      |   19 ++++++++++++++-----
 kernel/trace/trace_sched_wakeup.c |   18 +++++++++++++-----
 4 files changed, 63 insertions(+), 16 deletions(-)
kernel/trace/trace.c +29 -6
@@ -2743,11 +2743,25 @@ static int set_tracer_option(struct trac
 	return -EINVAL;
 }
 
-static void set_tracer_flags(unsigned int mask, int enabled)
+/* Some tracers require overwrite to stay enabled */
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set)
+{
+	if (tracer->enabled && (mask & TRACE_ITER_OVERWRITE) && !set)
+		return -1;
+
+	return 0;
+}
+
+int set_tracer_flag(unsigned int mask, int enabled)
 {
 	/* do nothing if flag is already set */
 	if (!!(trace_flags & mask) == !!enabled)
-		return;
+		return 0;
+
+	/* Give the tracer a chance to approve the change */
+	if (current_trace->flag_changed)
+		if (current_trace->flag_changed(current_trace, mask, !!enabled))
+			return -EINVAL;
 
 	if (enabled)
 		trace_flags |= mask;
@@ -2759,6 +2773,8 @@ static void set_tracer_flags(unsigned in
 
 	if (mask == TRACE_ITER_OVERWRITE)
 		ring_buffer_change_overwrite(global_trace.buffer, enabled);
+
+	return 0;
 }
 
 static ssize_t
@@ -2768,7 +2784,7 @@ tracing_trace_options_write(struct file
 	char buf[64];
 	char *cmp;
 	int neg = 0;
-	int ret = 0;
+	int ret = -ENODEV;
 	int i;
 
 	if (cnt >= sizeof(buf))
@@ -2789,7 +2805,7 @@ tracing_trace_options_write(struct file
 
 	for (i = 0; trace_options[i]; i++) {
 		if (strcmp(cmp, trace_options[i]) == 0) {
-			set_tracer_flags(1 << i, !neg);
+			ret = set_tracer_flag(1 << i, !neg);
 			break;
 		}
 	}
@@ -2800,7 +2816,7 @@ tracing_trace_options_write(struct file
 
 	mutex_unlock(&trace_types_lock);
 
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	*ppos += cnt;
@@ -3125,6 +3141,9 @@ static int tracing_set_tracer(const char
 		goto out;
 
 	trace_branch_disable();
+
+	current_trace->enabled = false;
+
 	if (current_trace && current_trace->reset)
 		current_trace->reset(tr);
 	if (current_trace && current_trace->use_max_tr) {
@@ -3154,6 +3173,7 @@ static int tracing_set_tracer(const char
 			goto out;
 	}
 
+	current_trace->enabled = true;
 	trace_branch_enable(tr);
  out:
 	mutex_unlock(&trace_types_lock);
@@ -4490,9 +4510,12 @@ trace_options_core_write(struct file *fi
 		return -EINVAL;
 
 	mutex_lock(&trace_types_lock);
-	set_tracer_flags(1 << index, val);
+	ret = set_tracer_flag(1 << index, val);
 	mutex_unlock(&trace_types_lock);
 
+	if (ret < 0)
+		return ret;
+
 	*ppos += cnt;
 
 	return cnt;
kernel/trace/trace.h +7 -0
@@ -278,10 +278,14 @@ struct tracer {
 	enum print_line_t	(*print_line)(struct trace_iterator *iter);
 	/* If you handled the flag setting, return 0 */
 	int			(*set_flag)(u32 old_flags, u32 bit, int set);
+	/* Return 0 if OK with change, else return non-zero */
+	int			(*flag_changed)(struct tracer *tracer,
+						u32 mask, int set);
 	struct tracer		*next;
 	struct tracer_flags	*flags;
 	int			print_max;
 	int			use_max_tr;
+	bool			enabled;
 };
 
 
@@ -826,6 +830,9 @@ extern struct list_head ftrace_events;
 extern const char *__start___trace_bprintk_fmt[];
 extern const char *__stop___trace_bprintk_fmt[];
 
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set);
+int set_tracer_flag(unsigned int mask, int enabled);
+
 #undef FTRACE_ENTRY
 #define FTRACE_ENTRY(call, struct_name, id, tstruct, print, filter)	\
 	extern struct ftrace_event_call					\
kernel/trace/trace_irqsoff.c +14 -5
@@ -32,7 +32,7 @@ enum {
 
 static int trace_type __read_mostly;
 
-static int save_lat_flag;
+static int save_flags;
 
 static void stop_irqsoff_tracer(struct trace_array *tr, int graph);
 static int start_irqsoff_tracer(struct trace_array *tr, int graph);
@@ -557,8 +557,11 @@ static void stop_irqsoff_tracer(struct t
 
 static void __irqsoff_tracer_init(struct trace_array *tr)
 {
-	save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
-	trace_flags |= TRACE_ITER_LATENCY_FMT;
+	save_flags = trace_flags;
+
+	/* non overwrite screws up the latency tracers */
+	set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+	set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
 
 	tracing_max_latency = 0;
 	irqsoff_trace = tr;
@@ -572,10 +575,13 @@ static void __irqsoff_tracer_init(struct
 
 static void irqsoff_tracer_reset(struct trace_array *tr)
 {
+	int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+	int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
 	stop_irqsoff_tracer(tr, is_graph());
 
-	if (!save_lat_flag)
-		trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+	set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+	set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
 }
 
 static void irqsoff_tracer_start(struct trace_array *tr)
@@ -608,6 +614,7 @@ static struct tracer irqsoff_tracer __re
 	.print_line     = irqsoff_print_line,
 	.flags		= &tracer_flags,
 	.set_flag	= irqsoff_set_flag,
+	.flag_changed	= trace_keep_overwrite,
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_irqsoff,
 #endif
@@ -641,6 +648,7 @@ static struct tracer preemptoff_tracer _
 	.print_line     = irqsoff_print_line,
 	.flags		= &tracer_flags,
 	.set_flag	= irqsoff_set_flag,
+	.flag_changed	= trace_keep_overwrite,
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_preemptoff,
 #endif
@@ -676,6 +684,7 @@ static struct tracer preemptirqsoff_trac
 	.print_line     = irqsoff_print_line,
 	.flags		= &tracer_flags,
 	.set_flag	= irqsoff_set_flag,
+	.flag_changed	= trace_keep_overwrite,
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_preemptirqsoff,
 #endif
kernel/trace/trace_sched_wakeup.c +13 -5
@@ -36,7 +36,7 @@ static void __wakeup_reset(struct trace_
 static int wakeup_graph_entry(struct ftrace_graph_ent *trace);
 static void wakeup_graph_return(struct ftrace_graph_ret *trace);
 
-static int save_lat_flag;
+static int save_flags;
 
 #define TRACE_DISPLAY_GRAPH     1
 
@@ -539,8 +539,11 @@ static void stop_wakeup_tracer(struct tr
 
 static int __wakeup_tracer_init(struct trace_array *tr)
 {
-	save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
-	trace_flags |= TRACE_ITER_LATENCY_FMT;
+	save_flags = trace_flags;
+
+	/* non overwrite screws up the latency tracers */
+	set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+	set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
 
 	tracing_max_latency = 0;
 	wakeup_trace = tr;
@@ -562,12 +565,15 @@ static int wakeup_rt_tracer_init(struct
 
 static void wakeup_tracer_reset(struct trace_array *tr)
 {
+	int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+	int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
 	stop_wakeup_tracer(tr);
 	/* make sure we put back any tasks we are tracing */
 	wakeup_reset(tr);
 
-	if (!save_lat_flag)
-		trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+	set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+	set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
 }
 
 static void wakeup_tracer_start(struct trace_array *tr)
@@ -593,6 +599,7 @@ static struct tracer wakeup_tracer __rea
 	.print_line	= wakeup_print_line,
 	.flags		= &tracer_flags,
 	.set_flag	= wakeup_set_flag,
+	.flag_changed	= trace_keep_overwrite,
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_wakeup,
 #endif
@@ -614,6 +621,7 @@ static struct tracer wakeup_rt_tracer __
 	.print_line	= wakeup_print_line,
 	.flags		= &tracer_flags,
 	.set_flag	= wakeup_set_flag,
+	.flag_changed	= trace_keep_overwrite,
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_wakeup,
 #endif
author maintainer
#45 lore raw

PATCH 44/68 net: remove a WARN_ON() in net_enable_timestamp()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 9979a55a833883242e3a29f3596676edd7199c46 ]

The WARN_ON(in_interrupt()) in net_enable_timestamp() can get false positive, in socket clone path, run from softirq context :

[ 3641.624425] WARNING: at net/core/dev.c:1532 net_enable_timestamp+0x7b/0x80()
[ 3641.668811] Call Trace:
[ 3641.671254]  <IRQ>  [<ffffffff80286817>] warn_slowpath_common+0x87/0xc0
[ 3641.677871]  [<ffffffff8028686a>] warn_slowpath_null+0x1a/0x20
[ 3641.683683]  [<ffffffff80742f8b>] net_enable_timestamp+0x7b/0x80
[ 3641.689668]  [<ffffffff80732ce5>] sk_clone_lock+0x425/0x450
[ 3641.695222]  [<ffffffff8078db36>] inet_csk_clone_lock+0x16/0x170
[ 3641.701213]  [<ffffffff807ae449>] tcp_create_openreq_child+0x29/0x820
[ 3641.707663]  [<ffffffff807d62e2>] ? ipt_do_table+0x222/0x670
[ 3641.713354]  [<ffffffff807aaf5b>] tcp_v4_syn_recv_sock+0xab/0x3d0
[ 3641.719425]  [<ffffffff807af63a>] tcp_check_req+0x3da/0x530
[ 3641.724979]  [<ffffffff8078b400>] ? inet_hashinfo_init+0x60/0x80
[ 3641.730964]  [<ffffffff807ade6f>] ? tcp_v4_rcv+0x79f/0xbe0
[ 3641.736430]  [<ffffffff807ab9bd>] tcp_v4_do_rcv+0x38d/0x4f0
[ 3641.741985]  [<ffffffff807ae14a>] tcp_v4_rcv+0xa7a/0xbe0

Its safe at this point because the parent socket owns a reference on the netstamp_needed, so we cant have a 0 -> 1 transition, which requires to lock a mutex.

Instead of refining the check, lets remove it, as all known callers are safe. If it ever changes in the future, static_key_slow_inc() will complain anyway.

---
 net/core/dev.c |    1 -
 1 file changed, 1 deletion(-)
net/core/dev.c +0 -1
@@ -1482,7 +1482,6 @@ void net_enable_timestamp(void)
 		return;
 	}
 #endif
-	WARN_ON(in_interrupt());
 	static_key_slow_inc(&netstamp_needed);
 }
 EXPORT_SYMBOL(net_enable_timestamp);
author maintainer
#46 lore raw

PATCH 45/68 sky2: Receive Overflows not counted

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mirko Lindner <[email protected]>

[ Upstream commit 9cfe8b156c21cf340b3a10ecb3022fbbc1c39185 ]

The sky2 driver doesn't count the Receive Overflows because the MAC interrupt for this event is not set in the MAC's interrupt mask. The MAC's interrupt mask is set only for Transmit FIFO Underruns.

Fix: The correct setting should be (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) Otherwise the Receive Overflow event will not generate any interrupt. The Receive Overflow interrupt is handled correctly

---
 drivers/net/ethernet/marvell/sky2.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/marvell/sky2.h +1 -1
@@ -2069,7 +2069,7 @@ enum {
 	GM_IS_RX_FF_OR	= 1<<1,	/* Receive FIFO Overrun */
 	GM_IS_RX_COMPL	= 1<<0,	/* Frame Reception Complete */
 
-#define GMAC_DEF_MSK     GM_IS_TX_FF_UR
+#define GMAC_DEF_MSK     (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
 };
 
 /*	GMAC_LINK_CTRL	16 bit	GMAC Link Control Reg (YUKON only) */
author maintainer
#47 lore raw

PATCH 46/68 sky2: Threshold for Pause Packet is set wrong

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mirko Lindner <[email protected]>

[ Upstream commit 74f9f42c1c1650e74fb464f76644c9041f996851 ]

The sky2 driver sets the Rx Upper Threshold for Pause Packet generation to a wrong value which leads to only 2kB of RAM remaining space. This can lead to Rx overflow errors even with activated flow-control.

Fix: We should increase the value to 8192/8

---
 drivers/net/ethernet/marvell/sky2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/marvell/sky2.c +1 -1
@@ -1066,7 +1066,7 @@ static void sky2_ramset(struct sky2_hw *
 		sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
 		sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
 
-		tp = space - 2048/8;
+		tp = space - 8192/8;
 		sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
 		sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
 	} else {
author maintainer
#48 lore raw

PATCH 47/68 tcp: preserve ACK clocking in TSO

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit f4541d60a449afd40448b06496dcd510f505928e ]

A long standing problem with TSO is the fact that tcp_tso_should_defer() rearms the deferred timer, while it should not.

Current code leads to following bad bursty behavior :

20:11:24.484333 IP A > B: . 297161:316921(19760) ack 1 win 119 20:11:24.484337 IP B > A: . ack 263721 win 1117 20:11:24.485086 IP B > A: . ack 265241 win 1117 20:11:24.485925 IP B > A: . ack 266761 win 1117 20:11:24.486759 IP B > A: . ack 268281 win 1117 20:11:24.487594 IP B > A: . ack 269801 win 1117 20:11:24.488430 IP B > A: . ack 271321 win 1117 20:11:24.489267 IP B > A: . ack 272841 win 1117 20:11:24.490104 IP B > A: . ack 274361 win 1117 20:11:24.490939 IP B > A: . ack 275881 win 1117 20:11:24.491775 IP B > A: . ack 277401 win 1117 20:11:24.491784 IP A > B: . 316921:332881(15960) ack 1 win 119 20:11:24.492620 IP B > A: . ack 278921 win 1117 20:11:24.493448 IP B > A: . ack 280441 win 1117 20:11:24.494286 IP B > A: . ack 281961 win 1117 20:11:24.495122 IP B > A: . ack 283481 win 1117 20:11:24.495958 IP B > A: . ack 285001 win 1117 20:11:24.496791 IP B > A: . ack 286521 win 1117 20:11:24.497628 IP B > A: . ack 288041 win 1117 20:11:24.498459 IP B > A: . ack 289561 win 1117 20:11:24.499296 IP B > A: . ack 291081 win 1117 20:11:24.500133 IP B > A: . ack 292601 win 1117 20:11:24.500970 IP B > A: . ack 294121 win 1117 20:11:24.501388 IP B > A: . ack 295641 win 1117 20:11:24.501398 IP A > B: . 332881:351881(19000) ack 1 win 119

While the expected behavior is more like :

20:19:49.259620 IP A > B: . 197601:202161(4560) ack 1 win 119 20:19:49.260446 IP B > A: . ack 154281 win 1212 20:19:49.261282 IP B > A: . ack 155801 win 1212 20:19:49.262125 IP B > A: . ack 157321 win 1212 20:19:49.262136 IP A > B: . 202161:206721(4560) ack 1 win 119 20:19:49.262958 IP B > A: . ack 158841 win 1212 20:19:49.263795 IP B > A: . ack 160361 win 1212 20:19:49.264628 IP B > A: . ack 161881 win 1212 20:19:49.264637 IP A > B: . 206721:211281(4560) ack 1 win 119 20:19:49.265465 IP B > A: . ack 163401 win 1212 20:19:49.265886 IP B > A: . ack 164921 win 1212 20:19:49.266722 IP B > A: . ack 166441 win 1212 20:19:49.266732 IP A > B: . 211281:215841(4560) ack 1 win 119 20:19:49.267559 IP B > A: . ack 167961 win 1212 20:19:49.268394 IP B > A: . ack 169481 win 1212 20:19:49.269232 IP B > A: . ack 171001 win 1212 20:19:49.269241 IP A > B: . 215841:221161(5320) ack 1 win 119

Cc Yuchung Cheng <[email protected]>
Cc Van Jacobson <[email protected]>
Cc Neal Cardwell <[email protected]>
Cc Nandita Dukkipati <[email protected]>
---
 net/ipv4/tcp_output.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/ipv4/tcp_output.c +5 -2
@@ -1587,8 +1587,11 @@ static int tcp_tso_should_defer(struct s
 			goto send_now;
 	}
 
-	/* Ok, it looks like it is advisable to defer.  */
-	tp->tso_deferred = 1 | (jiffies << 1);
+	/* Ok, it looks like it is advisable to defer.
+	 * Do not rearm the timer if already set to not break TCP ACK clocking.
+	 */
+	if (!tp->tso_deferred)
+		tp->tso_deferred = 1 | (jiffies << 1);
 
 	return 1;
 
author maintainer
#49 lore raw

PATCH 48/68 tcp: undo spurious timeout after SACK reneging

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <[email protected]>

[ Upstream commit 7ebe183c6d444ef5587d803b64a1f4734b18c564 ]

On SACK reneging the sender immediately retransmits and forces a timeout but disables Eifel (undo). If the (buggy) receiver does not drop any packet this can trigger a false slow-start retransmit storm driven by the ACKs of the original packets. This can be detected with undo and TCP timestamps.

---
 net/ipv4/tcp_input.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
net/ipv4/tcp_input.c +2 -5
@@ -2260,11 +2260,8 @@ void tcp_enter_loss(struct sock *sk, int
 	if (tcp_is_reno(tp))
 		tcp_reset_reno_sack(tp);
 
-	if (!how) {
-		/* Push undo marker, if it was plain RTO and nothing
-		 * was retransmitted. */
-		tp->undo_marker = tp->snd_una;
-	} else {
+	tp->undo_marker = tp->snd_una;
+	if (how) {
 		tp->sacked_out = 0;
 		tp->fackets_out = 0;
 	}
author maintainer
#50 lore raw

PATCH 49/68 8021q: fix a potential use-after-free

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

[ Upstream commit 4a7df340ed1bac190c124c1601bfc10cde9fb4fb ]

vlan_vid_del() could possibly free ->vlan_info after a RCU grace period, however, we may still refer to the freed memory area by 'grp' pointer. Found by code inspection.

This patch moves vlan_vid_del() as behind as possible.

---
 net/8021q/vlan.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
net/8021q/vlan.c +7 -7
@@ -86,13 +86,6 @@ void unregister_vlan_dev(struct net_devi
 
 	grp = &vlan_info->grp;
 
-	/* Take it out of our own structures, but be sure to interlock with
-	 * HW accelerating devices or SW vlan input packet processing if
-	 * VLAN is not 0 (leave it there for 802.1p).
-	 */
-	if (vlan_id)
-		vlan_vid_del(real_dev, vlan_id);
-
 	grp->nr_vlan_devs--;
 
 	if (vlan->flags & VLAN_FLAG_GVRP)
@@ -108,6 +101,13 @@ void unregister_vlan_dev(struct net_devi
 	if (grp->nr_vlan_devs == 0)
 		vlan_gvrp_uninit_applicant(real_dev);
 
+	/* Take it out of our own structures, but be sure to interlock with
+	 * HW accelerating devices or SW vlan input packet processing if
+	 * VLAN is not 0 (leave it there for 802.1p).
+	 */
+	if (vlan_id)
+		vlan_vid_del(real_dev, vlan_id);
+
 	/* Get rid of the vlan's reference to real_dev */
 	dev_put(real_dev);
 }
author maintainer
#51 lore raw

PATCH 50/68 thermal: shorten too long mcast group name

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masatake YAMATO <[email protected]>

[ Upstream commits 73214f5d9f33b79918b1f7babddd5c8af28dd23d
and f1e79e208076ffe7bad97158275f1c572c04f5c7, the latter adds an assertion to genetlink to prevent this from happening again in the future. ]

The original name is too long.

---
 include/linux/thermal.h |    2 +-
 net/netlink/genetlink.c |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
include/linux/thermal.h +1 -1
@@ -108,7 +108,7 @@ struct thermal_zone_device {
 /* Adding event notification support elements */
 #define THERMAL_GENL_FAMILY_NAME                "thermal_event"
 #define THERMAL_GENL_VERSION                    0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_group"
+#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_grp"
 
 enum events {
 	THERMAL_AUX0,
net/netlink/genetlink.c +1 -0
@@ -142,6 +142,7 @@ int genl_register_mc_group(struct genl_f
 	int err = 0;
 
 	BUG_ON(grp->name[0] == '\0');
+	BUG_ON(memchr(grp->name, '\0', GENL_NAMSIZ) == NULL);
 
 	genl_lock();
 
author maintainer
#52 lore raw

PATCH 51/68 unix: fix a race condition in unix_release()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Moore <[email protected]>

[ Upstream commit ded34e0fe8fe8c2d595bfa30626654e4b87621e0 ]

As reported by Jan, and others over the past few years, there is a race condition caused by unix_release setting the sock->sk pointer to NULL before properly marking the socket as dead/orphaned. This can cause a problem with the LSM hook security_unix_may_send() if there is another socket attempting to write to this partially released socket in between when sock->sk is set to NULL and it is marked as dead/orphaned. This patch fixes this by only setting sock->sk to NULL after the socket has been marked as dead; I also take the opportunity to make unix_release_sock() a void function as it only ever returned 0/success.

Dave, I think this one should go on the -stable pile.

Special thanks to Jan for coming up with a reproducer for this problem.

---
 net/unix/af_unix.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
net/unix/af_unix.c +3 -4
@@ -374,7 +374,7 @@ static void unix_sock_destructor(struct
 #endif
 }
 
-static int unix_release_sock(struct sock *sk, int embrion)
+static void unix_release_sock(struct sock *sk, int embrion)
 {
 	struct unix_sock *u = unix_sk(sk);
 	struct path path;
@@ -443,8 +443,6 @@ static int unix_release_sock(struct sock
 
 	if (unix_tot_inflight)
 		unix_gc();		/* Garbage collect fds */
-
-	return 0;
 }
 
 static void init_peercred(struct sock *sk)
@@ -694,9 +692,10 @@ static int unix_release(struct socket *s
 	if (!sk)
 		return 0;
 
+	unix_release_sock(sk, 0);
 	sock->sk = NULL;
 
-	return unix_release_sock(sk, 0);
+	return 0;
 }
 
 static int unix_autobind(struct socket *sock)
author maintainer
#53 lore raw

PATCH 52/68 af_unix: dont send SCM_CREDENTIAL when dest socket is NULL

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: dingtianhong <[email protected]>

[ Upstream commit 14134f6584212d585b310ce95428014b653dfaf6 ]

SCM_SCREDENTIALS should apply to write() syscalls only either source or destination socket asserted SOCK_PASSCRED. The original implememtation in maybe_add_creds is wrong, and breaks several LSB testcases ( i.e. /tset/LSB.os/netowkr/recvfrom/T.recvfrom).

---
 net/unix/af_unix.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/unix/af_unix.c +2 -2
@@ -1414,8 +1414,8 @@ static void maybe_add_creds(struct sk_bu
 	if (UNIXCB(skb).cred)
 		return;
 	if (test_bit(SOCK_PASSCRED, &sock->flags) ||
-	    !other->sk_socket ||
-	    test_bit(SOCK_PASSCRED, &other->sk_socket->flags)) {
+	    (other->sk_socket &&
+	    test_bit(SOCK_PASSCRED, &other->sk_socket->flags))) {
 		UNIXCB(skb).pid  = get_pid(task_tgid(current));
 		UNIXCB(skb).cred = get_current_cred();
 	}
author maintainer
#54 lore raw

PATCH 53/68 bonding: remove already created master sysfs link on failure

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Veaceslav Falico <[email protected]>

[ Upstream commit 9fe16b78ee17579cb4f333534cf7043e94c67024 ]

If slave sysfs symlink failes to be created - we end up without removing the master sysfs symlink. Remove it in case of failure.

---
 drivers/net/bonding/bond_sysfs.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/net/bonding/bond_sysfs.c +5 -0
@@ -183,6 +183,11 @@ int bond_create_slave_symlinks(struct ne
 	sprintf(linkname, "slave_%s", slave->name);
 	ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
 				linkname);
+
+	/* free the master link created earlier in case of error */
+	if (ret)
+		sysfs_remove_link(&(slave->dev.kobj), "master");
+
 	return ret;
 
 }
author maintainer
#55 lore raw

PATCH 54/68 bonding: fix miimon and arp_interval delayed work race conditions

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

[ Upstream commit fbb0c41b814d497c656fc7be9e35456f139cb2fb ]

First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq)
This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all.
Observation 2: Use of INIT_DELAYED_WORK()
Work needs to be initialized only once prior to (de/en)queueing.
Observation 3: IFF_UP is set only after ndo_open is called

Related race conditions:
1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued.
2. Multiple races with INIT_DELAYED_WORK()
Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions:
(races are also possible between the calls to INIT_DELAYED_WORK()
and workqueue code)
bonding_store_miimon() - bonding_store_arp_interval(), bond_close(),
bond_open(), enqueued functions
bonding_store_arp_interval() - bonding_store_miimon(), bond_close(),
bond_open(), enqueued functions
3. By Obs.1 we need to change bond_cancel_all()

Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued.
Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch.
Note: I have left 1 line intentionally over 80 characters (84) because I
didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it.

v2: Make description text < 75 columns

---
 drivers/net/bonding/bond_main.c  |   88 +++++++++++----------------------------
 drivers/net/bonding/bond_sysfs.c |   34 ++++-----------
 2 files changed, 36 insertions(+), 86 deletions(-)
drivers/net/bonding/bond_main.c +26 -62
@@ -3398,6 +3398,28 @@ static int bond_xmit_hash_policy_l2(stru
 
 /*-------------------------- Device entry points ----------------------------*/
 
+static void bond_work_init_all(struct bonding *bond)
+{
+	INIT_DELAYED_WORK(&bond->mcast_work,
+			  bond_resend_igmp_join_requests_delayed);
+	INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
+	INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
+	if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+		INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
+	else
+		INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
+	INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
+}
+
+static void bond_work_cancel_all(struct bonding *bond)
+{
+	cancel_delayed_work_sync(&bond->mii_work);
+	cancel_delayed_work_sync(&bond->arp_work);
+	cancel_delayed_work_sync(&bond->alb_work);
+	cancel_delayed_work_sync(&bond->ad_work);
+	cancel_delayed_work_sync(&bond->mcast_work);
+}
+
 static int bond_open(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
@@ -3420,41 +3442,27 @@ static int bond_open(struct net_device *
 	}
 	read_unlock(&bond->lock);
 
-	INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
+	bond_work_init_all(bond);
 
 	if (bond_is_lb(bond)) {
 		/* bond_alb_initialize must be called before the timer
 		 * is started.
 		 */
-		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
-			/* something went wrong - fail the open operation */
+		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB)))
 			return -ENOMEM;
-		}
-
-		INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
 		queue_delayed_work(bond->wq, &bond->alb_work, 0);
 	}
 
-	if (bond->params.miimon) {  /* link check interval, in milliseconds. */
-		INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
+	if (bond->params.miimon)  /* link check interval, in milliseconds. */
 		queue_delayed_work(bond->wq, &bond->mii_work, 0);
-	}
 
 	if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
-		if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-			INIT_DELAYED_WORK(&bond->arp_work,
-					  bond_activebackup_arp_mon);
-		else
-			INIT_DELAYED_WORK(&bond->arp_work,
-					  bond_loadbalance_arp_mon);
-
 		queue_delayed_work(bond->wq, &bond->arp_work, 0);
 		if (bond->params.arp_validate)
 			bond->recv_probe = bond_arp_rcv;
 	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
-		INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
 		queue_delayed_work(bond->wq, &bond->ad_work, 0);
 		/* register to receive LACPDUs */
 		bond->recv_probe = bond_3ad_lacpdu_recv;
@@ -3469,34 +3477,10 @@ static int bond_close(struct net_device
 	struct bonding *bond = netdev_priv(bond_dev);
 
 	write_lock_bh(&bond->lock);
-
 	bond->send_peer_notif = 0;
-
 	write_unlock_bh(&bond->lock);
 
-	if (bond->params.miimon) {  /* link check interval, in milliseconds. */
-		cancel_delayed_work_sync(&bond->mii_work);
-	}
-
-	if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
-		cancel_delayed_work_sync(&bond->arp_work);
-	}
-
-	switch (bond->params.mode) {
-	case BOND_MODE_8023AD:
-		cancel_delayed_work_sync(&bond->ad_work);
-		break;
-	case BOND_MODE_TLB:
-	case BOND_MODE_ALB:
-		cancel_delayed_work_sync(&bond->alb_work);
-		break;
-	default:
-		break;
-	}
-
-	if (delayed_work_pending(&bond->mcast_work))
-		cancel_delayed_work_sync(&bond->mcast_work);
-
+	bond_work_cancel_all(bond);
 	if (bond_is_lb(bond)) {
 		/* Must be called only after all
 		 * slaves have been released
@@ -4375,26 +4359,6 @@ static void bond_setup(struct net_device
 	bond_dev->features |= bond_dev->hw_features;
 }
 
-static void bond_work_cancel_all(struct bonding *bond)
-{
-	if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
-		cancel_delayed_work_sync(&bond->mii_work);
-
-	if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
-		cancel_delayed_work_sync(&bond->arp_work);
-
-	if (bond->params.mode == BOND_MODE_ALB &&
-	    delayed_work_pending(&bond->alb_work))
-		cancel_delayed_work_sync(&bond->alb_work);
-
-	if (bond->params.mode == BOND_MODE_8023AD &&
-	    delayed_work_pending(&bond->ad_work))
-		cancel_delayed_work_sync(&bond->ad_work);
-
-	if (delayed_work_pending(&bond->mcast_work))
-		cancel_delayed_work_sync(&bond->mcast_work);
-}
-
 /*
 * Destroy a bonding device.
 * Must be under rtnl_lock when this function is called.
drivers/net/bonding/bond_sysfs.c +10 -24
@@ -518,6 +518,8 @@ static ssize_t bonding_store_arp_interva
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no arp_interval value specified.\n",
 		       bond->dev->name);
@@ -544,10 +546,6 @@ static ssize_t bonding_store_arp_interva
 		pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
 			bond->dev->name, bond->dev->name);
 		bond->params.miimon = 0;
-		if (delayed_work_pending(&bond->mii_work)) {
-			cancel_delayed_work(&bond->mii_work);
-			flush_workqueue(bond->wq);
-		}
 	}
 	if (!bond->params.arp_targets[0]) {
 		pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
@@ -559,19 +557,12 @@ static ssize_t bonding_store_arp_interva
 		 * timer will get fired off when the open function
 		 * is called.
 		 */
-		if (!delayed_work_pending(&bond->arp_work)) {
-			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-				INIT_DELAYED_WORK(&bond->arp_work,
-						  bond_activebackup_arp_mon);
-			else
-				INIT_DELAYED_WORK(&bond->arp_work,
-						  bond_loadbalance_arp_mon);
-
-			queue_delayed_work(bond->wq, &bond->arp_work, 0);
-		}
+		cancel_delayed_work_sync(&bond->mii_work);
+		queue_delayed_work(bond->wq, &bond->arp_work, 0);
 	}
 
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR,
@@ -967,6 +958,8 @@ static ssize_t bonding_store_miimon(stru
 	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (sscanf(buf, "%d", &new_value) != 1) {
 		pr_err("%s: no miimon value specified.\n",
 		       bond->dev->name);
@@ -998,10 +991,6 @@ static ssize_t bonding_store_miimon(stru
 				bond->params.arp_validate =
 					BOND_ARP_VALIDATE_NONE;
 			}
-			if (delayed_work_pending(&bond->arp_work)) {
-				cancel_delayed_work(&bond->arp_work);
-				flush_workqueue(bond->wq);
-			}
 		}
 
 		if (bond->dev->flags & IFF_UP) {
@@ -1010,15 +999,12 @@ static ssize_t bonding_store_miimon(stru
 			 * timer will get fired off when the open function
 			 * is called.
 			 */
-			if (!delayed_work_pending(&bond->mii_work)) {
-				INIT_DELAYED_WORK(&bond->mii_work,
-						  bond_mii_monitor);
-				queue_delayed_work(bond->wq,
-						   &bond->mii_work, 0);
-			}
+			cancel_delayed_work_sync(&bond->arp_work);
+			queue_delayed_work(bond->wq, &bond->mii_work, 0);
 		}
 	}
 out:
+	rtnl_unlock();
 	return ret;
 }
 static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
author maintainer
#56 lore raw

PATCH 55/68 bonding: fix disabling of arp_interval and miimon

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

[ Upstream commit 1bc7db16782c2a581fb4d53ca853631050f31611 ]

Currently if either arp_interval or miimon is disabled, they both get disabled, and upon disabling they get executed once more which is not the proper behaviour. Also when doing a no-op and disabling an already disabled one, the other again gets disabled.
Also fix the error messages with the proper valid ranges, and a small typo fix in the up delay error message (outputting "down delay", instead of "up delay").

---
 drivers/net/bonding/bond_sysfs.c |   92 ++++++++++++++++++++-------------------
 1 file changed, 48 insertions(+), 44 deletions(-)
drivers/net/bonding/bond_sysfs.c +48 -44
@@ -527,7 +527,7 @@ static ssize_t bonding_store_arp_interva
 		goto out;
 	}
 	if (new_value < 0) {
-		pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+		pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
 		       bond->dev->name, new_value, INT_MAX);
 		ret = -EINVAL;
 		goto out;
@@ -542,14 +542,15 @@ static ssize_t bonding_store_arp_interva
 	pr_info("%s: Setting ARP monitoring interval to %d.\n",
 		bond->dev->name, new_value);
 	bond->params.arp_interval = new_value;
-	if (bond->params.miimon) {
-		pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
-			bond->dev->name, bond->dev->name);
-		bond->params.miimon = 0;
-	}
-	if (!bond->params.arp_targets[0]) {
-		pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
-			bond->dev->name);
+	if (new_value) {
+		if (bond->params.miimon) {
+			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+				bond->dev->name, bond->dev->name);
+			bond->params.miimon = 0;
+		}
+		if (!bond->params.arp_targets[0])
+			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+				bond->dev->name);
 	}
 	if (bond->dev->flags & IFF_UP) {
 		/* If the interface is up, we may need to fire off
@@ -557,10 +558,13 @@ static ssize_t bonding_store_arp_interva
 		 * timer will get fired off when the open function
 		 * is called.
 		 */
-		cancel_delayed_work_sync(&bond->mii_work);
-		queue_delayed_work(bond->wq, &bond->arp_work, 0);
+		if (!new_value) {
+			cancel_delayed_work_sync(&bond->arp_work);
+		} else {
+			cancel_delayed_work_sync(&bond->mii_work);
+			queue_delayed_work(bond->wq, &bond->arp_work, 0);
+		}
 	}
-
 out:
 	rtnl_unlock();
 	return ret;
@@ -702,7 +706,7 @@ static ssize_t bonding_store_downdelay(s
 	}
 	if (new_value < 0) {
 		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
@@ -757,8 +761,8 @@ static ssize_t bonding_store_updelay(str
 		goto out;
 	}
 	if (new_value < 0) {
-		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
@@ -968,37 +972,37 @@ static ssize_t bonding_store_miimon(stru
 	}
 	if (new_value < 0) {
 		pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
-	} else {
-		pr_info("%s: Setting MII monitoring interval to %d.\n",
-			bond->dev->name, new_value);
-		bond->params.miimon = new_value;
-		if (bond->params.updelay)
-			pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
-				bond->dev->name,
-				bond->params.updelay * bond->params.miimon);
-		if (bond->params.downdelay)
-			pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
-				bond->dev->name,
-				bond->params.downdelay * bond->params.miimon);
-		if (bond->params.arp_interval) {
-			pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
-				bond->dev->name);
-			bond->params.arp_interval = 0;
-			if (bond->params.arp_validate) {
-				bond->params.arp_validate =
-					BOND_ARP_VALIDATE_NONE;
-			}
-		}
-
-		if (bond->dev->flags & IFF_UP) {
-			/* If the interface is up, we may need to fire off
-			 * the MII timer. If the interface is down, the
-			 * timer will get fired off when the open function
-			 * is called.
-			 */
+	}
+	pr_info("%s: Setting MII monitoring interval to %d.\n",
+		bond->dev->name, new_value);
+	bond->params.miimon = new_value;
+	if (bond->params.updelay)
+		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.updelay * bond->params.miimon);
+	if (bond->params.downdelay)
+		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.downdelay * bond->params.miimon);
+	if (new_value && bond->params.arp_interval) {
+		pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+			bond->dev->name);
+		bond->params.arp_interval = 0;
+		if (bond->params.arp_validate)
+			bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+	}
+	if (bond->dev->flags & IFF_UP) {
+		/* If the interface is up, we may need to fire off
+		 * the MII timer. If the interface is down, the
+		 * timer will get fired off when the open function
+		 * is called.
+		 */
+		if (!new_value) {
+			cancel_delayed_work_sync(&bond->mii_work);
+		} else {
 			cancel_delayed_work_sync(&bond->arp_work);
 			queue_delayed_work(bond->wq, &bond->mii_work, 0);
 		}
author maintainer
#57 lore raw

PATCH 56/68 drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers.

---
 drivers/net/ethernet/ti/davinci_emac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ti/davinci_emac.c +1 -1
@@ -1052,7 +1052,7 @@ static void emac_tx_handler(void *token,
 	atomic_dec(&priv->cur_tx);
 
 	if (unlikely(netif_queue_stopped(ndev)))
-		netif_start_queue(ndev);
+		netif_wake_queue(ndev);
 	ndev->stats.tx_packets++;
 	ndev->stats.tx_bytes += len;
 	dev_kfree_skb_any(skb);
author maintainer
#58 lore raw

PATCH 57/68 drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mugunthan V N <[email protected]>

[ Upstream commit b56d6b3fca6d1214dbc9c5655f26e5d4ec04afc8 ]

To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers.

---
 drivers/net/ethernet/ti/cpsw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/ti/cpsw.c +1 -1
@@ -249,7 +249,7 @@ void cpsw_tx_handler(void *token, int le
 	struct cpsw_priv	*priv = netdev_priv(ndev);
 
 	if (unlikely(netif_queue_stopped(ndev)))
-		netif_start_queue(ndev);
+		netif_wake_queue(ndev);
 	priv->stats.tx_packets++;
 	priv->stats.tx_bytes += len;
 	dev_kfree_skb_any(skb);
author maintainer
#59 lore raw

PATCH 58/68 net: fix *_DIAG_MAX constants

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Vagin <[email protected]>

[ Upstream commit ae5fc98728c8bbbd6d7cab0b9781671fc4419c1b ]

Follow the common pattern and define *_DIAG_MAX like:

        [...]
        __XXX_DIAG_MAX,
};

Because everyone is used to do:

        struct nlattr *attrs[XXX_DIAG_MAX+1];

        nla_parse([...], XXX_DIAG_MAX, [...]
Cc "David S. Miller" <[email protected]>
Cc Pavel Emelyanov <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc "Paul E. McKenney" <[email protected]>
Cc David Howells <[email protected]>
---
 include/linux/unix_diag.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
include/linux/unix_diag.h +3 -1
@@ -38,9 +38,11 @@ enum {
 	UNIX_DIAG_RQLEN,
 	UNIX_DIAG_MEMINFO,
 
-	UNIX_DIAG_MAX,
+	__UNIX_DIAG_MAX,
 };
 
+#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1)
+
 struct unix_diag_vfs {
 	__u32	udiag_vfs_ino;
 	__u32	udiag_vfs_dev;
author maintainer
#60 lore raw

PATCH 59/68 aoe: reserve enough headroom on skbs

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 91c5746425aed8f7188a351f1224a26aa232e4b3 ]

Some network drivers use a non default hard_header_len

Transmitted skb should take into account dev->hard_header_len, or risk crashes or expensive reallocations.

In the case of aoe, lets reserve MAX_HEADER bytes.

David reported a crash in defxx driver, solved by this patch.

---
 drivers/block/aoe/aoecmd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/block/aoe/aoecmd.c +2 -1
@@ -30,8 +30,9 @@ new_skb(ulong len)
 {
 	struct sk_buff *skb;
 
-	skb = alloc_skb(len, GFP_ATOMIC);
+	skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC);
 	if (skb) {
+		skb_reserve(skb, MAX_HEADER);
 		skb_reset_mac_header(skb);
 		skb_reset_network_header(skb);
 		skb->protocol = __constant_htons(ETH_P_AOE);
author maintainer
#61 lore raw

PATCH 60/68 atl1e: drop pci-msi support because of packet corruption

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 ]

Usage of pci-msi results in corrupted dma packet transfers to the host.

---
 drivers/net/ethernet/atheros/atl1e/atl1e.h      |    1 -
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c |   22 ++--------------------
 2 files changed, 2 insertions(+), 21 deletions(-)
drivers/net/ethernet/atheros/atl1e/atl1e.h +0 -1
@@ -438,7 +438,6 @@ struct atl1e_adapter {
 	struct atl1e_hw        hw;
 	struct atl1e_hw_stats  hw_stats;
 
-	bool have_msi;
 	u32 wol;
 	u16 link_speed;
 	u16 link_duplex;
drivers/net/ethernet/atheros/atl1e/atl1e_main.c +2 -20
@@ -1870,37 +1870,19 @@ static void atl1e_free_irq(struct atl1e_
 	struct net_device *netdev = adapter->netdev;
 
 	free_irq(adapter->pdev->irq, netdev);
-
-	if (adapter->have_msi)
-		pci_disable_msi(adapter->pdev);
 }
 
 static int atl1e_request_irq(struct atl1e_adapter *adapter)
 {
 	struct pci_dev    *pdev   = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
-	int flags = 0;
 	int err = 0;
 
-	adapter->have_msi = true;
-	err = pci_enable_msi(adapter->pdev);
-	if (err) {
-		netdev_dbg(adapter->netdev,
-			   "Unable to allocate MSI interrupt Error: %d\n", err);
-		adapter->have_msi = false;
-	} else
-		netdev->irq = pdev->irq;
-
-
-	if (!adapter->have_msi)
-		flags |= IRQF_SHARED;
-	err = request_irq(adapter->pdev->irq, atl1e_intr, flags,
-			netdev->name, netdev);
+	err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED,
+			  netdev->name, netdev);
 	if (err) {
 		netdev_dbg(adapter->netdev,
 			   "Unable to allocate interrupt Error: %d\n", err);
-		if (adapter->have_msi)
-			pci_disable_msi(adapter->pdev);
 		return err;
 	}
 	netdev_dbg(adapter->netdev, "atl1e_request_irq OK\n");
author maintainer
#62 lore raw

PATCH 61/68 DM9000B: driver initialization upgrade

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joseph CHANG <[email protected]>

[ Upstream commit 6741f40d198c6a5feb23653a1efd4ca47f93d83d ]

Fix bug for DM9000 revision B which contain a DSP PHY

DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For
explicity PHY Reset and PHY init parameter, and
first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe().

Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit.

Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved.

---
 drivers/net/ethernet/davicom/dm9000.c |  214 +++++++++++++++++-----------------
 drivers/net/ethernet/davicom/dm9000.h |   11 +
 2 files changed, 120 insertions(+), 105 deletions(-)
drivers/net/ethernet/davicom/dm9000.c +110 -104
@@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __
 		tmp = readl(reg);
 }
 
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+	if (db->in_suspend)
+		mdelay(ms);
+	else
+		msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+	board_info_t *db = netdev_priv(dev);
+	unsigned long flags;
+	unsigned int reg_save;
+	int ret;
+
+	mutex_lock(&db->addr_lock);
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
+	/* Fill the phyxcer register into REG_0C */
+	iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Issue phyxcer read command */
+	iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+	writeb(reg_save, db->io_addr);
+	spin_unlock_irqrestore(&db->lock, flags);
+
+	dm9000_msleep(db, 1);		/* Wait read complete */
+
+	spin_lock_irqsave(&db->lock, flags);
+	reg_save = readb(db->io_addr);
+
+	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
+
+	/* The read data keeps on REG_0D & REG_0E */
+	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+	spin_unlock_irqrestore(&db->lock, flags);
+
+	mutex_unlock(&db->addr_lock);
+
+	dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+	return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+		 int phyaddr_unused, int reg, int value)
+{
+	board_info_t *db = netdev_priv(dev);
+	unsigned long flags;
+	unsigned long reg_save;
+
+	dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+	mutex_lock(&db->addr_lock);
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
+	/* Fill the phyxcer register into REG_0C */
+	iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Fill the written data into REG_0D & REG_0E */
+	iow(db, DM9000_EPDRL, value);
+	iow(db, DM9000_EPDRH, value >> 8);
+
+	/* Issue phyxcer write command */
+	iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+	writeb(reg_save, db->io_addr);
+	spin_unlock_irqrestore(&db->lock, flags);
+
+	dm9000_msleep(db, 1);		/* Wait write complete */
+
+	spin_lock_irqsave(&db->lock, flags);
+	reg_save = readb(db->io_addr);
+
+	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
+
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
+	spin_unlock_irqrestore(&db->lock, flags);
+	mutex_unlock(&db->addr_lock);
+}
+
 /* dm9000_set_io
  *
  * select the specified set of io routines to use with the
@@ -794,6 +895,9 @@ dm9000_init_dm9000(struct net_device *de
 
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
 
+	dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+	dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
 	ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
 
 	/* if wol is needed, then always set NCR_WAKEEN otherwise we end
@@ -1200,109 +1304,6 @@ dm9000_open(struct net_device *dev)
 	return 0;
 }
 
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
-	if (db->in_suspend)
-		mdelay(ms);
-	else
-		msleep(ms);
-}
-
-/*
- *   Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-	unsigned int reg_save;
-	int ret;
-
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock,flags);
-
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
-	/* Fill the phyxcer register into REG_0C */
-	iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
-	iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);	/* Issue phyxcer read command */
-
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock,flags);
-
-	dm9000_msleep(db, 1);		/* Wait read complete */
-
-	spin_lock_irqsave(&db->lock,flags);
-	reg_save = readb(db->io_addr);
-
-	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
-
-	/* The read data keeps on REG_0D & REG_0E */
-	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
-	/* restore the previous address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock,flags);
-
-	mutex_unlock(&db->addr_lock);
-
-	dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
-	return ret;
-}
-
-/*
- *   Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
-		 int phyaddr_unused, int reg, int value)
-{
-	board_info_t *db = netdev_priv(dev);
-	unsigned long flags;
-	unsigned long reg_save;
-
-	dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
-	mutex_lock(&db->addr_lock);
-
-	spin_lock_irqsave(&db->lock,flags);
-
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
-	/* Fill the phyxcer register into REG_0C */
-	iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
-	/* Fill the written data into REG_0D & REG_0E */
-	iow(db, DM9000_EPDRL, value);
-	iow(db, DM9000_EPDRH, value >> 8);
-
-	iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);	/* Issue phyxcer write command */
-
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(&db->lock, flags);
-
-	dm9000_msleep(db, 1);		/* Wait write complete */
-
-	spin_lock_irqsave(&db->lock,flags);
-	reg_save = readb(db->io_addr);
-
-	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
-
-	/* restore the previous address */
-	writeb(reg_save, db->io_addr);
-
-	spin_unlock_irqrestore(&db->lock, flags);
-	mutex_unlock(&db->addr_lock);
-}
-
 static void
 dm9000_shutdown(struct net_device *dev)
 {
@@ -1501,7 +1502,12 @@ dm9000_probe(struct platform_device *pde
 	db->flags |= DM9000_PLATF_SIMPLE_PHY;
 #endif
 
-	dm9000_reset(db);
+	/* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+	 * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+	 * while probe stage.
+	 */
+
+	iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
 
 	/* try multiple times, DM9000 sometimes gets the read wrong */
 	for (i = 0; i < 8; i++) {
drivers/net/ethernet/davicom/dm9000.h +10 -1
@@ -69,7 +69,9 @@
 #define NCR_WAKEEN          (1<<6)
 #define NCR_FCOL            (1<<4)
 #define NCR_FDX             (1<<3)
-#define NCR_LBK             (3<<1)
+
+#define NCR_RESERVED        (3<<1)
+#define NCR_MAC_LBK         (1<<1)
 #define NCR_RST	            (1<<0)
 
 #define NSR_SPEED           (1<<7)
@@ -167,5 +169,12 @@
 #define ISR_LNKCHNG		(1<<5)
 #define ISR_UNDERRUN		(1<<4)
 
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR		0x1b    /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM	0xE100	/* DSP init parameter */
+
 #endif /* _DM9000X_H_ */
 
author maintainer
#63 lore raw

PATCH 62/68 ipv6: dont accept multicast traffic with scope 0

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 20314092c1b41894d8c181bf9aa6f022be2416aa ]

v2:
a) moved before multicast source address check
b) changed comment to netdev style

---
 net/ipv6/ip6_input.c |    9 +++++++++
 1 file changed, 9 insertions(+)
net/ipv6/ip6_input.c +9 -0
@@ -111,6 +111,15 @@ int ipv6_rcv(struct sk_buff *skb, struct
 	    ipv6_addr_loopback(&hdr->daddr))
 		goto err;
 
+	/* RFC4291 2.7
+	 * Nodes must not originate a packet to a multicast address whose scope
+	 * field contains the reserved value 0; if such a packet is received, it
+	 * must be silently dropped.
+	 */
+	if (ipv6_addr_is_multicast(&hdr->daddr) &&
+	    IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
+		goto err;
+
 	/*
 	 * RFC4291 2.7
 	 * Multicast addresses must not be used as source addresses in IPv6
author maintainer
#64 lore raw

PATCH 63/68 ipv6: fix bad free of addrconf_init_net

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hong Zhiguo <[email protected]>

[ Upstream commit a79ca223e029aa4f09abb337accf1812c900a800 ]

---
 net/ipv6/addrconf.c |   26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)
net/ipv6/addrconf.c +10 -16
@@ -4686,26 +4686,20 @@ static void addrconf_sysctl_unregister(s
 
 static int __net_init addrconf_init_net(struct net *net)
 {
-	int err;
+	int err = -ENOMEM;
 	struct ipv6_devconf *all, *dflt;
 
-	err = -ENOMEM;
-	all = &ipv6_devconf;
-	dflt = &ipv6_devconf_dflt;
+	all = kmemdup(&ipv6_devconf, sizeof(ipv6_devconf), GFP_KERNEL);
+	if (all == NULL)
+		goto err_alloc_all;
 
-	if (!net_eq(net, &init_net)) {
-		all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
-		if (all == NULL)
-			goto err_alloc_all;
+	dflt = kmemdup(&ipv6_devconf_dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
+	if (dflt == NULL)
+		goto err_alloc_dflt;
 
-		dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
-		if (dflt == NULL)
-			goto err_alloc_dflt;
-	} else {
-		/* these will be inherited by all namespaces */
-		dflt->autoconf = ipv6_defaults.autoconf;
-		dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
-	}
+	/* these will be inherited by all namespaces */
+	dflt->autoconf = ipv6_defaults.autoconf;
+	dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
 
 	net->ipv6.devconf_all = all;
 	net->ipv6.devconf_dflt = dflt;
author maintainer
#65 lore raw

PATCH 64/68 ipv6: dont accept node local multicast traffic from the wire

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 1c4a154e5253687c51123956dfcee9e9dfa8542d ]

Erik Hugne's errata proposal (Errata ID: 3480) to RFC4291 has been
verified: http://www.rfc-editor.org/errata_search.php?eid=3480

We have to check for pkt_type and loopback flag because either the packets are allowed to travel over the loopback interface (in which case pkt_type is PACKET_HOST and IFF_LOOPBACK flag is set) or they travel over a non-loopback interface back to us (in which case PACKET_TYPE is PACKET_LOOPBACK and IFF_LOOPBACK flag is not set).

---
 net/ipv6/ip6_input.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)
net/ipv6/ip6_input.c +12 -0
@@ -111,6 +111,18 @@ int ipv6_rcv(struct sk_buff *skb, struct
 	    ipv6_addr_loopback(&hdr->daddr))
 		goto err;
 
+	/* RFC4291 Errata ID: 3480
+	 * Interface-Local scope spans only a single interface on a
+	 * node and is useful only for loopback transmission of
+	 * multicast.  Packets with interface-local scope received
+	 * from another node must be discarded.
+	 */
+	if (!(skb->pkt_type == PACKET_LOOPBACK ||
+	      dev->flags & IFF_LOOPBACK) &&
+	    ipv6_addr_is_multicast(&hdr->daddr) &&
+	    IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
+		goto err;
+
 	/* RFC4291 2.7
 	 * Nodes must not originate a packet to a multicast address whose scope
 	 * field contains the reserved value 0; if such a packet is received, it
author maintainer
#66 lore raw

PATCH 65/68 ks8851: Fix interpretation of rxlen field.

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

[ Upstream commit 14bc435ea54cb888409efb54fc6b76c13ef530e9 ]

According to the Datasheet (page 52):
15-12 Reserved
11-0 RXBC Receive Byte Count
This field indicates the present received frame byte size.

The code has a bug:

                 rxh = ks8851_rdreg32(ks, KS_RXFHSR);
                 rxstat = rxh & 0xffff;
                 rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied
---
 drivers/net/ethernet/micrel/ks8851.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/micrel/ks8851.c +1 -1
@@ -547,7 +547,7 @@ static void ks8851_rx_pkts(struct ks8851
 	for (; rxfc != 0; rxfc--) {
 		rxh = ks8851_rdreg32(ks, KS_RXFHSR);
 		rxstat = rxh & 0xffff;
-		rxlen = rxh >> 16;
+		rxlen = (rxh >> 16) & 0xfff;
 
 		netif_dbg(ks, rx_status, ks->netdev,
 			  "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
author maintainer
#67 lore raw

PATCH 66/68 net: add a synchronize_net() in netdev_rx_handler_unregister()

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 00cfec37484761a44a3b6f4675a54caa618210ae ]

commit 35d48903e97819 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis :

<quoting Steven>

I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline.

In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do.

But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here:

        slave = bond_slave_get_rcu(skb->dev);
        bond = slave->bond; <--- BUG

the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference.

Looking at the code that unregisters the handler:

void netdev_rx_handler_unregister(struct net_device *dev) {

        ASSERT_RTNL();
        RCU_INIT_POINTER(dev->rx_handler, NULL);
        RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}

Which is basically:

        dev->rx_handler = NULL;
        dev->rx_handler_data = NULL;

And looking at __netif_receive_skb() we have:

        rx_handler = rcu_dereference(skb->dev->rx_handler);
        if (rx_handler) {
                if (pt_prev) {
                        ret = deliver_skb(skb, pt_prev, orig_dev);
                        pt_prev = NULL;
                }
                switch (rx_handler(&skb)) {

My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this:

        CPU0                    CPU1
        ----                    ----

rx_handler = skb->dev->rx_handler

                        netdev_rx_handler_unregister() {
                           dev->rx_handler = NULL;
                           dev->rx_handler_data = NULL;
  rx_handler()
   bond_handle_frame() {
    slave = skb->dev->rx_handler;
    bond = slave->bond; <-- NULL pointer dereference!!!

What protection am I missing in the bond release handler that would prevent the above from happening?

</quoting Steven>

We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL.

A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data.

The second way is better as it avoids an extra test in fast path.

---
 net/core/dev.c |    6 ++++++
 1 file changed, 6 insertions(+)
net/core/dev.c +6 -0
@@ -3124,6 +3124,7 @@ int netdev_rx_handler_register(struct ne
 	if (dev->rx_handler)
 		return -EBUSY;
 
+	/* Note: rx_handler_data must be set before rx_handler */
 	rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
 	rcu_assign_pointer(dev->rx_handler, rx_handler);
 
@@ -3144,6 +3145,11 @@ void netdev_rx_handler_unregister(struct
 
 	ASSERT_RTNL();
 	RCU_INIT_POINTER(dev->rx_handler, NULL);
+	/* a reader seeing a non NULL rx_handler in a rcu_read_lock()
+	 * section has a guarantee to see a non NULL rx_handler_data
+	 * as well.
+	 */
+	synchronize_net();
 	RCU_INIT_POINTER(dev->rx_handler_data, NULL);
 }
 EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
author maintainer
#68 lore raw

PATCH 67/68 pch_gbe: fix ip_summed checksum reporting on rx

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Veaceslav Falico <[email protected]>

[ Upstream commit 76a0e68129d7d24eb995a6871ab47081bbfa0acc ]

skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above.

---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +2 -2
@@ -1740,9 +1740,9 @@ pch_gbe_clean_rx(struct pch_gbe_adapter
 
 			skb->protocol = eth_type_trans(skb, netdev);
 			if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
-				skb->ip_summed = CHECKSUM_NONE;
-			else
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
+			else
+				skb->ip_summed = CHECKSUM_NONE;
 
 			napi_gro_receive(&adapter->napi, skb);
 			(*work_done)++;
author maintainer
#69 lore raw

PATCH 68/68 smsc75xx: fix jumbo frame support

In reply to Greg Kroah-Hartman

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steve Glendinning <[email protected]>

[ Upstream commit 4c51e53689569398d656e631c17308d9b8e84650 ]

This patch enables RX of jumbo frames for LAN7500.

Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count).

With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header).

---
 drivers/net/usb/smsc75xx.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/net/usb/smsc75xx.c +8 -4
@@ -725,8 +725,12 @@ static int smsc75xx_set_rx_max_frame_len
 static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct usbnet *dev = netdev_priv(netdev);
+	int ret;
+
+	if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+		return -EINVAL;
 
-	int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+	ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
 	check_warn_return(ret, "Failed to set mac rx frame length");
 
 	return usbnet_change_mtu(netdev, new_mtu);
@@ -979,7 +983,7 @@ static int smsc75xx_reset(struct usbnet
 
 	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
 
-	ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+	ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
 	check_warn_return(ret, "Failed to set max rx frame length");
 
 	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
@@ -1123,8 +1127,8 @@ static int smsc75xx_rx_fixup(struct usbn
 			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
 				dev->net->stats.rx_frame_errors++;
 		} else {
-			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
-			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
 				netif_dbg(dev, rx_err, dev->net,
 					"size err rx_cmd_a=0x%08x", rx_cmd_a);
 				return 0;
#70 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.4.39 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu Apr 4 22:12:59 UTC 2013. Anything received after that time might be too late.

Quoted 8 lines

The whole patch series can be found in one patch at:

        kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.39-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

Patches applied cleanly to 3.0.71, 3.4.38, and 3.8.5

Reviewing patches - will let you know anything odd.

Compiled and booted on the following systems:

HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

dmesgs for all releases look good. No regressions compared to the previous dmesgs for each of these releases.
mips compile problem fixed

Cross-compile tests results:

alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.8.y
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.8.y.
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all
mips: defconfig passed on all
mipsel: defconfig passed on all

-- Shuah

#26 lore raw

RE: [ 25/68] mwifiex: cancel cmd timer and free curr_cmd in shutdown process

In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 13 lines

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bing Zhao <[email protected]>

commit 084c7189acb3f969c855536166042e27f5dd703f upstream.

curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue.

Quoted 5 lines

This patch is intended for kernel 3.8+.
Please drop it from linux-3.4.y queue.

Thanks,
Bing