Skip to contentSkip to conversation

mac80211_hwsim driver attribute

DISCUSSION Johannes Berg 2 participants 3 messages Apr 3, 2013 – Apr 8, 2013 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 29 lines · Martin Pitt

Hello John, hello Johannes,

first, many thanks for this great mac80211_hwsim module! I am currently working on automatic test cases for the Linux network stack (wpa_supplicant, dhclient, NetworkManager, etc.), and this is of great help.

One issue is that NetworkManager does not get along with these simulated interfaces:

NetworkManager[24027]: <warn> /sys/devices/virtual/mac80211_hwsim/hwsim0/net/wlan1: couldn't determine device driver; ignoring...

It calls udev_device_get_driver() on the net device (wlan0) (and failing that, on its parent), but that fails because hwsim doesn't have a driver attribute. My real intel wifi does:

lrwxrwxrwx 1 root root 0 Apr 3 06:19 /sys/class/net/wlan0/device/driver -> ../../../../bus/pci/drivers/iwlwifi

But /sys/class/net/wlan1/device/ only has the default "uevent" and subsystem link.

Other drivers call something like pci_register_driver() or usb_register(), I figure those will register the driver symlink in sysfs? But admittedly I'm a kernel n00b, so I'd appreciate a hint where to look for.

Thank you in advance!

Martin

#2 lore raw
In reply to a message not in the archive

Martin,

Quoted 4 lines

/sys/class/net/wlan0/device/driver -> ../../../../bus/pci/drivers/iwlwifi

But /sys/class/net/wlan1/device/ only has the default "uevent" and subsystem link.

I suspect this is because there's no real "device", and therefore no real driver.

We do play with device_create() in hwsim, which was likely intended to address something like this, but I have no idea how this should really work.

johannes

#3 lore raw

Hello Johannes,

Johannes Berg [2013-04-03 15:44 +0200]:

Quoted 9 lines

Martin,

Quoted 4 lines

/sys/class/net/wlan0/device/driver -> ../../../../bus/pci/drivers/iwlwifi

But /sys/class/net/wlan1/device/ only has the default "uevent" and subsystem link.

I suspect this is because there's no real "device", and therefore no real driver.

There are real devices (wlan0, wlan1, etc.); there is also a real driver (mac80211_hwsim), the only thing that's a bit tricky is that there is no real bus. My impression is that such devices might belong to /sys/bus/platform/ ?

Quoted 3 lines

We do play with device_create() in hwsim, which was likely intended to address something like this, but I have no idea how this should really work.

I figured it out, it works well now. I'll send the patch to the lists/maintainers, and CC: Dan and you.

Thanks,

Martin

Signature · 2 lines
Martin Pitt                        | http://www.piware.de
Ubuntu Developer (www.ubuntu.com)  | Debian Developer  (www.debian.org)