cleanup duplicates in all tests
PATCH 1/1 cleanup duplicates in all tests
There are duplicate blank lines, comment hash and lines containing duplicate seqres= declarations, remove them.
Signed-off-by Rich Johnston <[email protected]>
--- tests/btrfs/254 | 3 --- tests/btrfs/264 | 4 ---- tests/btrfs/265 | 3 --- tests/btrfs/276 | 3 --- tests/btrfs/284 | 3 --- tests/btrfs/307 | 3 --- tests/ext4/271 | 2 -- tests/ext4/301 | 2 -- tests/ext4/302 | 2 -- tests/ext4/303 | 2 -- tests/ext4/304 | 2 -- tests/generic/001 | 2 -- tests/generic/002 | 2 -- tests/generic/005 | 2 -- tests/generic/006 | 2 -- tests/generic/007 | 2 -- tests/generic/010 | 2 -- tests/generic/011 | 2 -- tests/generic/013 | 3 --- tests/generic/014 | 2 -- tests/generic/015 | 2 -- tests/generic/020 | 4 ---- tests/generic/053 | 2 -- tests/generic/062 | 4 ---- tests/generic/068 | 4 ---- tests/generic/069 | 2 -- tests/generic/070 | 2 -- tests/generic/074 | 3 --- tests/generic/075 | 3 --- tests/generic/076 | 2 -- tests/generic/077 | 2 -- tests/generic/079 | 2 -- tests/generic/083 | 5 ----- tests/generic/088 | 2 -- tests/generic/089 | 4 ---- tests/generic/091 | 2 -- tests/generic/093 | 2 -- tests/generic/097 | 2 -- tests/generic/099 | 4 ---- tests/generic/100 | 3 --- tests/generic/105 | 2 -- tests/generic/112 | 3 --- tests/generic/113 | 3 --- tests/generic/117 | 2 -- tests/generic/120 | 3 --- tests/generic/123 | 3 --- tests/generic/124 | 2 -- tests/generic/125 | 2 -- tests/generic/126 | 2 -- tests/generic/127 | 3 --- tests/generic/128 | 2 -- tests/generic/129 | 2 -- tests/generic/130 | 2 -- tests/generic/131 | 2 -- tests/generic/132 | 3 --- tests/generic/133 | 2 -- tests/generic/135 | 4 ---- tests/generic/141 | 2 -- tests/generic/169 | 2 -- tests/generic/184 | 2 -- tests/generic/192 | 2 -- tests/generic/193 | 6 ------ tests/generic/198 | 2 -- tests/generic/204 | 2 -- tests/generic/207 | 2 -- tests/generic/208 | 2 -- tests/generic/209 | 2 -- tests/generic/210 | 2 -- tests/generic/211 | 2 -- tests/generic/212 | 2 -- tests/generic/213 | 2 -- tests/generic/214 | 3 --- tests/generic/215 | 2 -- tests/generic/219 | 2 -- tests/generic/221 | 2 -- tests/generic/223 | 2 -- tests/generic/224 | 2 -- tests/generic/225 | 3 --- tests/generic/226 | 2 -- tests/generic/228 | 2 -- tests/generic/230 | 2 -- tests/generic/231 | 2 -- tests/generic/232 | 2 -- tests/generic/233 | 2 -- tests/generic/234 | 2 -- tests/generic/235 | 2 -- tests/generic/236 | 2 -- tests/generic/237 | 2 -- tests/generic/239 | 2 -- tests/generic/240 | 2 -- tests/generic/241 | 2 -- tests/generic/245 | 3 --- tests/generic/246 | 2 -- tests/generic/247 | 2 -- tests/generic/248 | 2 -- tests/generic/249 | 2 -- tests/generic/251 | 3 --- tests/generic/255 | 2 -- tests/generic/256 | 3 --- tests/generic/257 | 2 -- tests/generic/258 | 2 -- tests/generic/260 | 3 --- tests/generic/263 | 2 -- tests/generic/269 | 2 -- tests/generic/270 | 2 -- tests/generic/273 | 2 -- tests/generic/274 | 2 -- tests/generic/275 | 2 -- tests/generic/277 | 2 -- tests/generic/280 | 2 -- tests/generic/285 | 2 -- tests/generic/286 | 2 -- tests/generic/288 | 3 --- tests/generic/294 | 2 -- tests/generic/299 | 2 -- tests/generic/300 | 2 -- tests/shared/051 | 6 ------ tests/shared/218 | 2 -- tests/shared/243 | 2 -- tests/shared/272 | 2 -- tests/shared/289 | 2 -- tests/shared/298 | 2 -- tests/shared/305 | 2 -- tests/udf/098 | 2 -- tests/udf/101 | 2 -- tests/udf/102 | 2 -- tests/xfs/003 | 2 -- tests/xfs/004 | 3 --- tests/xfs/008 | 2 -- tests/xfs/009 | 3 --- tests/xfs/012 | 2 -- tests/xfs/016 | 2 -- tests/xfs/017 | 2 -- tests/xfs/018 | 3 --- tests/xfs/019 | 2 -- tests/xfs/021 | 2 -- tests/xfs/022 | 2 -- tests/xfs/023 | 2 -- tests/xfs/024 | 2 -- tests/xfs/025 | 2 -- tests/xfs/026 | 2 -- tests/xfs/027 | 2 -- tests/xfs/028 | 3 --- tests/xfs/029 | 2 -- tests/xfs/030 | 3 --- tests/xfs/031 | 2 -- tests/xfs/033 | 2 -- tests/xfs/034 | 2 -- tests/xfs/035 | 2 -- tests/xfs/036 | 2 -- tests/xfs/037 | 2 -- tests/xfs/038 | 2 -- tests/xfs/039 | 2 -- tests/xfs/040 | 2 -- tests/xfs/041 | 2 -- tests/xfs/042 | 2 -- tests/xfs/043 | 2 -- tests/xfs/044 | 3 --- tests/xfs/045 | 3 --- tests/xfs/046 | 2 -- tests/xfs/047 | 5 ----- tests/xfs/048 | 2 -- tests/xfs/049 | 2 -- tests/xfs/050 | 5 ----- tests/xfs/052 | 2 -- tests/xfs/054 | 2 -- tests/xfs/055 | 2 -- tests/xfs/056 | 2 -- tests/xfs/057 | 10 ---------- tests/xfs/058 | 2 -- tests/xfs/059 | 2 -- tests/xfs/060 | 2 -- tests/xfs/061 | 2 -- tests/xfs/063 | 2 -- tests/xfs/064 | 3 --- tests/xfs/065 | 3 --- tests/xfs/066 | 2 -- tests/xfs/067 | 2 -- tests/xfs/071 | 3 --- tests/xfs/072 | 2 -- tests/xfs/073 | 3 --- tests/xfs/078 | 3 --- tests/xfs/080 | 2 -- tests/xfs/081 | 3 --- tests/xfs/082 | 2 -- tests/xfs/084 | 2 -- tests/xfs/085 | 2 -- tests/xfs/086 | 2 -- tests/xfs/087 | 2 -- tests/xfs/090 | 3 --- tests/xfs/092 | 2 -- tests/xfs/094 | 2 -- tests/xfs/095 | 2 -- tests/xfs/096 | 4 ---- tests/xfs/103 | 3 --- tests/xfs/104 | 2 -- tests/xfs/106 | 3 --- tests/xfs/107 | 3 --- tests/xfs/108 | 2 -- tests/xfs/109 | 2 -- tests/xfs/110 | 2 -- tests/xfs/111 | 2 -- tests/xfs/114 | 7 ------- tests/xfs/115 | 5 ----- tests/xfs/116 | 3 --- tests/xfs/118 | 3 --- tests/xfs/119 | 2 -- tests/xfs/121 | 2 -- tests/xfs/122 | 2 -- tests/xfs/134 | 3 --- tests/xfs/136 | 3 --- tests/xfs/137 | 2 -- tests/xfs/138 | 2 -- tests/xfs/139 | 2 -- tests/xfs/140 | 2 -- tests/xfs/142 | 2 -- tests/xfs/143 | 2 -- tests/xfs/144 | 2 -- tests/xfs/145 | 2 -- tests/xfs/146 | 2 -- tests/xfs/147 | 2 -- tests/xfs/148 | 3 --- tests/xfs/149 | 2 -- tests/xfs/150 | 2 -- tests/xfs/151 | 2 -- tests/xfs/152 | 2 -- tests/xfs/153 | 2 -- tests/xfs/154 | 2 -- tests/xfs/155 | 2 -- tests/xfs/156 | 2 -- tests/xfs/157 | 2 -- tests/xfs/158 | 2 -- tests/xfs/159 | 2 -- tests/xfs/160 | 2 -- tests/xfs/161 | 2 -- tests/xfs/162 | 2 -- tests/xfs/163 | 3 --- tests/xfs/164 | 4 ---- tests/xfs/165 | 4 ---- tests/xfs/166 | 2 -- tests/xfs/167 | 2 -- tests/xfs/168 | 2 -- tests/xfs/170 | 2 -- tests/xfs/171 | 2 -- tests/xfs/172 | 2 -- tests/xfs/173 | 2 -- tests/xfs/174 | 2 -- tests/xfs/175 | 2 -- tests/xfs/176 | 3 --- tests/xfs/177 | 3 --- tests/xfs/178 | 2 -- tests/xfs/179 | 2 -- tests/xfs/180 | 2 -- tests/xfs/181 | 2 -- tests/xfs/182 | 2 -- tests/xfs/183 | 2 -- tests/xfs/185 | 3 --- tests/xfs/186 | 3 --- tests/xfs/187 | 3 --- tests/xfs/188 | 2 -- tests/xfs/189 | 3 --- tests/xfs/190 | 2 -- tests/xfs/191 | 2 -- tests/xfs/194 | 2 -- tests/xfs/195 | 2 -- tests/xfs/196 | 2 -- tests/xfs/197 | 2 -- tests/xfs/199 | 2 -- tests/xfs/200 | 3 --- tests/xfs/201 | 5 ----- tests/xfs/202 | 2 -- tests/xfs/203 | 2 -- tests/xfs/205 | 2 -- tests/xfs/206 | 2 -- tests/xfs/216 | 2 -- tests/xfs/217 | 2 -- tests/xfs/220 | 3 --- tests/xfs/222 | 2 -- tests/xfs/227 | 2 -- tests/xfs/229 | 2 -- tests/xfs/238 | 2 -- tests/xfs/242 | 3 --- tests/xfs/244 | 2 -- tests/xfs/250 | 2 -- tests/xfs/252 | 2 -- tests/xfs/253 | 2 -- tests/xfs/259 | 2 -- tests/xfs/261 | 2 -- tests/xfs/262 | 3 --- tests/xfs/266 | 2 -- tests/xfs/267 | 2 -- tests/xfs/268 | 2 -- tests/xfs/278 | 3 --- tests/xfs/279 | 2 -- tests/xfs/281 | 2 -- tests/xfs/282 | 2 -- tests/xfs/283 | 2 -- tests/xfs/287 | 2 -- tests/xfs/290 | 2 -- tests/xfs/291 | 2 -- tests/xfs/292 | 2 -- tests/xfs/293 | 2 -- tests/xfs/295 | 2 -- tests/xfs/296 | 2 -- tests/xfs/297 | 2 -- 305 files changed, 722 deletions(-)
tests/btrfs/254 +0 -3
@@ -24,9 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/btrfs/264 +0 -4
@@ -24,9 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -123,7 +120,6 @@ _fill_blk() wait $! } - # Append a random size to the files # arg1 : FS in question _append_file()
tests/btrfs/265 +0 -3
@@ -23,9 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/btrfs/276 +0 -3
@@ -27,9 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/btrfs/284 +0 -3
@@ -23,9 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here="`pwd`" tmp=/tmp/$$
tests/btrfs/307 +0 -3
@@ -24,9 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "== QA output created by $seq" here=`pwd`
tests/ext4/271 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/ext4/301 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/ext4/302 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/ext4/303 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/ext4/304 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/001 +0 -2
@@ -33,8 +33,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" # get standard environment, filters and checks
tests/generic/002 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" # get standard environment, filters and checks
tests/generic/005 +0 -2
@@ -34,8 +34,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/006 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/007 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/010 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/011 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" out=""
tests/generic/013 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -91,7 +89,6 @@ _do_test() _check_test_fs } - # real QA test starts here _supported_fs generic _supported_os IRIX Linux
tests/generic/014 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/015 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/020 +0 -4
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -79,7 +77,6 @@ _attr_list() fi } - # real QA test starts here _supported_fs generic _supported_os Linux
@@ -167,7 +164,6 @@ OCTAL_SIZE=`echo "obase=8; $MAX_ATTRVAL_ _attr -q -g "long_attr" $testfile | od -t x1 | sed -e "s/^0*$OCTAL_SIZE$/ATTRSIZE/" _attr -r "long_attr" $testfile >/dev/null - echo "*** set/get/remove really long names (expect failure)" short="XXXXXXXXXX" long="$short$short$short$short$short$short$short$short$short$short"
tests/generic/053 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/062 +0 -4
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -142,7 +140,6 @@ for nsp in $ATTR_MODES; do done done - # # Test the directory descent code #
@@ -174,7 +171,6 @@ echo echo "*** directory descent without following symlinks" getfattr -h -P -R -m '.' -e hex $SCRATCH_MNT | _sort_getfattr_output - # # Test the backup/restore code #
tests/generic/068 +0 -4
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -46,7 +44,6 @@ _cleanup() trap "_cleanup" 0 1 2 3 15 - # get standard environment, filters and checks . ./common/rc . ./common/filter
@@ -71,7 +68,6 @@ _scratch_mount touch $tmp.running - # start fsstress loop in a background block { STRESS_DIR="$SCRATCH_MNT/fsstress_test_dir"
tests/generic/069 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/070 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/074 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -108,7 +106,6 @@ _process_args() done } - # real QA test starts here rm -f $seqres.full
tests/generic/075 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -123,7 +121,6 @@ _process_args() done } - # real QA test starts here _supported_fs generic _supported_os IRIX Linux
tests/generic/076 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/077 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/079 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/083 +0 -3
@@ -31,11 +29,8 @@ #----------------------------------------------------------------------- # - seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/088 +0 -2
@@ -26,8 +26,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/089 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" mtab_output=$TEST_DIR/mtab_output
tests/generic/091 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/093 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq here=`pwd` tmp=/tmp/$$
tests/generic/097 +0 -2
@@ -30,8 +30,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/099 +0 -4
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -236,7 +234,6 @@ chacl o::---,g::---,u:$acl2:rwx,u::---,m echo "Expect to PASS as should match on user" $runas -u $acl2 -g $acl2 ./file1 2>&1 - #------------------------------------------------------- echo ""
@@ -272,7 +269,6 @@ _acl_list file3 cd .. umask 022 - #------------------------------------------------------- echo ""
tests/generic/100 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -78,7 +76,6 @@ cd $testdir tar -xRvf $TEMP_DIR/$TAR_FILE >>$seqres.full 2>&1 cd $here - # use diff -qr to compare ls -R -l ${testdir}${POPULATED_DIR} >>$seqres.full 2>&1 diff -qr $POPULATED_DIR ${testdir}${POPULATED_DIR}
tests/generic/105 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/112 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -121,7 +119,6 @@ _process_args() done } - # real QA test starts here _supported_fs generic _supported_os Linux
tests/generic/113 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -76,7 +74,6 @@ _do_test() rm -f $_files } - # real QA test starts here _supported_fs generic _supported_os Linux
tests/generic/117 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/120 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -94,7 +92,6 @@ echo "*** writing to file ***" echo "asdf" >> $SCRATCH_MNT/testfile2 _compare_access_times $SCRATCH_MNT/testfile2 "writing file" - umount $SCRATCH_MNT # success, all done
tests/generic/123 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -77,5 +75,4 @@ _user_do "mv $my_test_subdir/data_cohere cat $my_test_subdir/data_coherency.txt - exit
tests/generic/124 +0 -2
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/125 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/126 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/127 +0 -3
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -121,7 +119,6 @@ FSX_ARGS="-f $FSX_ARGS" _fsx_std_nommap _fsx_std_mmap - status=0 _cleanup exit
tests/generic/128 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/129 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/130 +0 -2
@@ -33,8 +33,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/131 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/132 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/133 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/135 +0 -4
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -61,8 +59,6 @@ _umount_mount() cd "$CWD" } - - _umount_mount cd $SCRATCH_MNT
tests/generic/141 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/169 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/184 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq - silence is golden" here=`pwd`
tests/generic/192 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/193 +0 -6
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -70,13 +68,11 @@ _supported_os Linux _require_user _need_to_be_root - # # make sure we have a normal umask set # umask 022 - # # Test the ATTR_UID case #
@@ -127,7 +123,6 @@ su ${qa_user} -c "chgrp ${qa_user} test. _cleanup_files - # # Test the ATTR_MODE case #
@@ -230,7 +225,6 @@ echo -n "after: "; stat -c '%A' test.${ _cleanup_files - # # Test ATTR_*TIMES_SET #
tests/generic/198 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/204 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/207 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/208 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/209 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/210 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/211 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/212 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/213 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/generic/214 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
@@ -146,7 +144,6 @@ $XFS_IO_PROG -F -f \ -c "pwrite 1136718 104115" \ $TEST_DIR/test214-7 | _filter_xfs_io_unique - # success, all done status=0 exit
tests/generic/215 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/generic/219 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/221 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/223 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/224 +0 -2
@@ -29,8 +29,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/225 +0 -3
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -55,7 +53,6 @@ rm -f $seqres.full fiemapfile=$SCRATCH_MNT/$seq.fiemap fiemaplog=$SCRATCH_MNT/$seq.log - [ -x $here/src/fiemap-tester ] || _notrun "fiemap-tester not built" seed=`date +%s`
tests/generic/226 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/228 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/generic/230 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/231 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/232 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/233 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/234 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/235 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/236 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/generic/237 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/239 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/240 +0 -2
@@ -30,8 +30,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/241 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/245 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -59,7 +57,6 @@ _filter_directory_not_empty() trap "_cleanup ; exit \$status" 0 1 2 3 15 - mkdir $dir mkdir $dir/aa
tests/generic/246 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/247 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/248 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/249 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/251 +0 -3
@@ -23,11 +23,8 @@ # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #----------------------------------------------------------------------- - seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/255 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/256 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -54,7 +52,6 @@ _require_user testfile=$TEST_DIR/256.$$ - # _fill_fs() # # Fills a file system by repeatedly creating files in the given folder
tests/generic/257 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/258 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/260 +0 -3
@@ -21,11 +21,8 @@ # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #----------------------------------------------------------------------- - seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/263 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/269 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/270 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/273 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/274 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/275 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/277 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" status=1 # failure is the default!
tests/generic/280 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/285 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/286 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/288 +0 -3
@@ -21,11 +21,8 @@ # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #----------------------------------------------------------------------- - seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" status=0
tests/generic/294 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/299 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/generic/300 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/shared/051 +0 -6
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq here=`pwd` tmp=/tmp/$$
@@ -230,7 +228,6 @@ chacl o::---,g::---,u:$acl2:rwx,u::---,m echo "Expect to PASS as should match on user" $runas -u $acl2 -g $acl2 ./file1 2>&1 - #------------------------------------------------------- echo ""
@@ -266,7 +263,6 @@ chacl -l file3 | _acl_filter_id cd .. umask 022 - #------------------------------------------------------- echo ""
@@ -283,7 +279,6 @@ chacl -l file1 | _acl_filter_id chacl -l acldir | _acl_filter_id chacl -l acldir/file2 | _acl_filter_id - #------------------------------------------------------- echo ""
@@ -307,7 +302,6 @@ echo "Change #2..." $runas -u 12345 -g 54321 -- `which chacl` -r u::---,g::---,o::--- root find root -print | xargs chacl -l - #------------------------------------------------------- echo ""
tests/shared/218 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/shared/243 +0 -2
@@ -43,8 +43,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/shared/272 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/shared/289 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/shared/298 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" status=1 # failure is the default!
tests/shared/305 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/udf/098 +0 -2
@@ -31,8 +31,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/udf/101 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/udf/102 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/003 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" # get standard environment, filters and checks
tests/xfs/004 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -54,7 +52,6 @@ _populate_scratch() _scratch_mount # and then remount } - # get standard environment, filters and checks . ./common/rc . ./common/filter
tests/xfs/008 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/009 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -185,6 +183,5 @@ EOF _filesize $out - status=0 exit
tests/xfs/012 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/016 +0 -2
@@ -37,8 +37,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/017 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/018 +0 -3
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -58,7 +56,6 @@ _require_v2log # link correct .out file _link_out_file $seq.op $seqfull.op - echo "*** init FS" umount $SCRATCH_DEV >/dev/null 2>&1
tests/xfs/019 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/021 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/022 +0 -2
@@ -28,8 +28,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/023 +0 -2
@@ -26,8 +26,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/024 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/025 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/026 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/027 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/028 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -73,6 +71,5 @@ _dump_inventory _do_invutil -F _dump_inventory - # success, all done exit
tests/xfs/029 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/030 +0 -3
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -105,7 +103,6 @@ _scratch_mkfs_xfs $DSIZE | _filter_mkfs _check_ag 0 _check_ag -1 - # success, all done status=0 exit
tests/xfs/031 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/033 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/034 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/035 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/036 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/037 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/038 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/039 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/040 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/041 +0 -2
@@ -26,8 +26,6 @@ set +x seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/042 +0 -2
@@ -27,8 +27,6 @@ set +x seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/043 +0 -2
@@ -27,8 +27,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/044 +0 -3
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -109,7 +107,6 @@ _unexpected() exit } - # real QA test starts here # _require_scratch
tests/xfs/045 +0 -3
@@ -21,12 +21,9 @@ # #----------------------------------------------------------------------- # -# seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/046 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/047 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/048 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/049 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/xfs/050 +0 -5
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -46,12 +44,10 @@ _cleanup() } trap "_cleanup; exit \$status" 0 1 2 3 15 - # real QA test starts here _supported_fs xfs _supported_os Linux IRIX - cp /dev/null $seqres.full chmod a+rwx $seqres.full # arbitrary users will write here
@@ -63,7 +59,6 @@ bhard=500 isoft=4 ihard=10 - _filter_report() { tr -s '[:space:]' | \
tests/xfs/052 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/054 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/055 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/056 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/057 +0 -10
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -47,11 +45,3 @@ _supported_os IRIX status=0 exit - - - - - - - -
tests/xfs/058 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/059 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/060 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/061 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/063 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/064 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -38,7 +36,6 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 . ./common/filter . ./common/dump - _ls_size_filter() { #
tests/xfs/065 +0 -3
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -194,7 +192,6 @@ while [ $i -le $num_dumps ]; do let i=$i+1 done - # success, all done status=0 exit
tests/xfs/066 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/067 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/071 +0 -2
@@ -24,8 +24,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" rm -f $seqres.full
tests/xfs/072 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/xfs/073 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -125,7 +123,6 @@ _verify_copy() rm -f $target } - # real QA test starts here _supported_fs xfs _supported_os Linux
tests/xfs/078 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -122,7 +120,6 @@ _grow_loop 168024b 1376452608 2048 1 _grow_loop 168024b 1376452608 512 1 16m _grow_loop 168024b 688230400 1024 1 - # Other corner cases suggested by dgc # also the following doesn't check if the filesystem is consistent. # - grow 1TB by 1.5TB (control)
tests/xfs/080 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/081 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -61,7 +59,6 @@ _require_v2log echo "*** init FS" umount $SCRATCH_DEV >/dev/null 2>&1 - # do a simple quota test to ensure DQUOT data is happening export MOUNT_OPTIONS="-o quota,gquota"
tests/xfs/082 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/084 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/085 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/086 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/087 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/090 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -114,7 +112,6 @@ realtime_mmap_unaligned() _check_scratch_fs } - _create_scratch realtime_direct_aligned 0
tests/xfs/092 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/094 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/095 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/096 +0 -3
@@ -26,8 +26,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -130,7 +128,6 @@ cat >$tmp.seq.params <<EOF -l version=1 -d sunit=`expr $big_su / 512`,swidth=`expr $big_su / 512` EOF - # # call mkfs in a loop for various params #
tests/xfs/103 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -73,7 +71,6 @@ _require_scratch _create_scratch - echo "*** testing nosymlinks directories" mkdir $SCRATCH_MNT/nosymlink echo "*** setting nosymlinks bit"
tests/xfs/104 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/106 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -93,7 +91,6 @@ $FSSTRESS_PROG -z -s 57069 -m 8 -n 1000 -f setxattr=500 \ -d $target - # also use space, to be able to go over/under limits easily uid=255 gid=254
tests/xfs/107 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -108,7 +106,6 @@ $FSSTRESS_PROG -z -s 47806 -m 8 -n 500 - -f setxattr=250 \ -d $target - QARGS="-x -D $tmp.projects -P /dev/null $SCRATCH_MNT" echo "### initial report"
tests/xfs/108 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/109 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/110 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/111 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/114 +0 -7
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -39,7 +37,6 @@ _cleanup() rm -f $tmp.* } - _check_paths() { _path=$1 # might want to only check this path
@@ -143,7 +140,6 @@ _test_hardlink() _check_paths $SCRATCH_MNT/$x done - echo "" echo "now try removing half of the hardlinks" echo ""
@@ -178,7 +174,6 @@ _test_hardlink() # dir to dir2 where dir2 does not exist # dir to dir/dir3 - not allowed # -# _test_rename() { echo ""
@@ -238,7 +233,6 @@ _filter_num() -e 's/seed = [0-9][0-9]*/seed = S/' } - _test_fsstress() { echo ""
@@ -264,7 +258,6 @@ _test_fsstress() _check_paths } - _test_dirstress() { echo ""
tests/xfs/115 +0 -4
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -92,7 +90,6 @@ _filter() -e 's/Attribute "[0-9][0-9]*/Attribute "INODE/' } - # get standard environment, filters and checks . ./common/rc . ./common/filter
@@ -136,7 +133,6 @@ touch $d/file7 touch $d/file8 touch $d/file9 - _do_test() { echo ""
tests/xfs/116 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -62,7 +60,6 @@ mount $SCRATCH_DEV $SCRATCH_MNT umount $SCRATCH_MNT xfs_db -r -c sb -c print $SCRATCH_DEV | grep qflags - # success, all done status=0 exit
tests/xfs/118 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -73,7 +71,6 @@ _chowning_file() echo "" } - echo "mkfs on scratch" _scratch_mkfs_xfs >$seqres.full
tests/xfs/119 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/121 +0 -2
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/122 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/134 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -88,7 +86,6 @@ fi src/feature -p $SCRATCH_DEV [ $? -ne 0 ] && _notrun "Installed kernel does not support project quotas" - mkdir $dir $XFS_IO_PROG -r -c "chproj -R 1" -c "chattr -R +P" $dir
tests/xfs/136 +0 -3
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -132,7 +130,6 @@ _print_inode_a() _scratch_mount } - _test_add_eas() { _print_inode
tests/xfs/137 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/138 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/139 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/140 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/142 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/143 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/144 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/145 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/146 +0 -2
@@ -25,8 +25,6 @@ seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/147 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/148 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -106,7 +104,6 @@ _scratch_mkfs_xfs $DSIZE | _filter_mkfs _check_ag 0 _check_ag -1 - # success, all done status=0 exit
tests/xfs/149 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/150 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/151 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/152 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/153 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/154 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/155 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/156 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/157 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/158 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/159 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/160 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/161 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/162 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/163 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -62,7 +60,6 @@ _require_scratch _scratch_mkfs_xfs >/dev/null 2>&1 _dmapi_scratch_mount - qa_file=$SCRATCH_MNT/dmapi_hole_file touch $qa_file
tests/xfs/164 +0 -4
@@ -30,8 +30,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -53,7 +51,6 @@ _filter_io() # # 1: [128..199]: 212280..212351 0 (212280..212351) 72 10000 # -# _filter_bmap() { awk '$3 ~ /hole/ { print $1, $2, $3; next }
@@ -61,7 +58,6 @@ _filter_bmap() {print $1, $2}' >> $seqres.full } - # get standard environment, filters and checks . ./common/rc . ./common/filter
tests/xfs/165 +0 -4
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -51,7 +49,6 @@ _filter_io() # < 1: [8..79]: 6552..6623 0 (6552..6623) 72 # > 1: [8..79]: 202544..202615 0 (202544..202615) 72 # -# _filter_bmap() { awk '$3 ~ /hole/ { print $1, $2, $3; next }
@@ -81,7 +78,6 @@ end=`expr 10 \* $len` # write the initial file $XFS_IO_PROG -f -c "pwrite 0 ${end}k" $testfile | _filter_io - off=0 while [ $off -le $end ] do
tests/xfs/166 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/167 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/168 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/170 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/171 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/172 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/173 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/174 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/175 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/176 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/177 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -81,7 +79,6 @@ _scratch_mount "-o dmapi,mtpt=$SCRATCH_M echo "Start bulkstat_unlink_test_modified" $here/src/bulkstat_unlink_test_modified 10 1000 1 $SCRATCH_MNT/bulkstat - # success, all done status=0 exit
tests/xfs/178 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/179 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/180 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/181 +0 -2
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" _cleanup()
tests/xfs/182 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/183 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/185 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -51,7 +49,6 @@ _require_scratch _scratch_mkfs_xfs -b size=512 >/dev/null 2>&1 _dmapi_scratch_mount - cat > $tmp.dmapi-param <<EOF # length offset 16k 0 # page aligned
tests/xfs/186 +0 -3
@@ -35,8 +35,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -136,7 +134,6 @@ _changeto_attr1() $XFS_DB_PROG -x -c "version attr1" $SCRATCH_DEV | _filter_version } - # get standard environment, filters and checks . ./common/rc . ./common/filter
tests/xfs/187 +0 -2
@@ -29,8 +29,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/188 +0 -2
@@ -31,8 +31,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/189 +0 -3
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -161,7 +159,6 @@ _test_remount_barrier() umount $SCRATCH_MNT } - # # Example fstab entry # /dev/sdb2 /mnt/scratch1 xfs defaults 0 0
tests/xfs/190 +0 -2
@@ -36,8 +36,6 @@ filename=test-190 seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/191 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/194 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/195 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/196 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/197 +0 -2
@@ -29,8 +29,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/199 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/200 +0 -3
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -121,7 +119,6 @@ blockdev --setrw $SCRATCH_DEV echo "mounting filesystem that needs recovery with -o ro:" _scratch_mount -o ro 2>&1 | _filter_scratch - # success, all done echo "*** done" rm -f $seqres.full
tests/xfs/201 +0 -4
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -43,8 +41,6 @@ do_pwrite() xfs_io -d -f $file -c "pwrite $offset $length" >/dev/null } - - _cleanup() { umount $SCRATCH_MNT
tests/xfs/202 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/203 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/205 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/206 +0 -2
@@ -29,8 +29,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/216 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/217 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/220 +0 -3
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -68,7 +66,6 @@ xfs_quota -x -c off $SCRATCH_DEV # and unmount (this used to crash) umount $SCRATCH_DEV - # create scratch filesystem _scratch_mkfs_xfs >/dev/null 2>&1
tests/xfs/222 +0 -2
@@ -27,8 +27,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/227 +0 -2
@@ -29,8 +29,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/229 +0 -2
@@ -30,8 +30,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/238 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/242 +0 -3
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
@@ -57,7 +55,6 @@ _test_io_zero() [ $(_test_io_zero) -eq 0 ] && _notrun "zero command not supported" - testfile=$TEST_DIR/242.$$ _test_generic_punch resvsp unresvsp zero 'bmap -p' _filter_bmap $testfile
tests/xfs/244 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/250 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/252 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/253 +0 -2
@@ -34,8 +34,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/259 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" status=1 # failure is the default!
tests/xfs/261 +0 -2
@@ -27,8 +27,6 @@ seq=$(basename $0) seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by ${seq}" here=$(pwd)
tests/xfs/262 +0 -3
@@ -28,8 +28,6 @@ seq=$(basename $0) seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=$(pwd)
@@ -71,7 +69,6 @@ _supported_os Linux _require_quota _require_scratch - # Make sure the hard limits reported are what was set. # It is entirely too clever... # It exploits the fact that we've set the soft and hard limits to
tests/xfs/266 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/267 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/268 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/278 +0 -3
@@ -5,7 +5,6 @@ # at the first run. See also commit 198b747f255346bca64408875763b6ca0ed3d57d # from xfsprogs tree. # -# #----------------------------------------------------------------------- # Copyright (c) 2011 Red Hat, Inc. All Rights Reserved. #
@@ -26,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/279 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/281 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/282 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/283 +0 -2
@@ -26,8 +26,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/287 +0 -2
@@ -25,8 +25,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ here=`pwd`
tests/xfs/290 +0 -2
@@ -28,8 +28,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/291 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/292 +0 -2
@@ -24,8 +24,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/293 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/295 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
tests/xfs/296 +0 -2
@@ -23,8 +23,6 @@ seq=`basename $0` seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq -seqres=$RESULT_DIR/$seq echo "QA output created by $seq" here=`pwd`
The rest of this diff is not shown. View the raw message.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Part of the diff is not shown here. View the raw message.
Quoted 11 lines · On 4/3/13 12:31 PM, [email protected] wrote:
There are duplicate blank lines, comment hash and lines containing duplicate seqres= declarations, remove them.
Signed-off-by Rich Johnston <[email protected]>--- tests/btrfs/254 | 3 --- tests/btrfs/264 | 4 ---- tests/btrfs/265 | 3 --- tests/btrfs/276 | 3 --- tests/btrfs/284 | 3 ---
nothing but dup line removal:
$ egrep "^[-+][a-z]" bigpatch | sort | uniq -seqres=$RESULT_DIR/$seq
and every file still has one left:
$ for FILE in `guilt files`; do grep -c "seqres=$RESULT_DIR" $FILE; done | sort | uniq 1
Looks good to me! :)
Reviewed-by Eric Sandeen <[email protected]>
Thanks,
-Eric
Thanks for the review Eric, this patch has been committed.
--Rich
commit 0efd4f4d483a725212f531bc2ed964de2766b1cd
Author: Rich Johnston <[email protected]> Date: Wed Apr 3 17:31:49 2013 +0000
xfstests: cleanup duplicates in all tests
There are duplicate blank lines, comment hash and lines containing duplicate seqres= declarations, remove them.