drivers/hwmon: DA9058 HWMON driver
Subsystems (3)
PATCH v5 6/7 drivers/hwmon: DA9058 HWMON driver
This patch is relative to linux next-20130417
This is the HWMON component driver of the Dialog DA9058 PMIC. This driver is just one component of the whole DA9058 PMIC driver. It depends on the CORE and ADC component drivers of the DA9058 MFD.
Changes relative to V3 of this patch:
- rebased to latest tagged linux-next - previously relative to mainline Documentation/hwmon/da9058
- added final NLdrivers/hwmon/Kconfig
- changed dependancy from I2C to MFDdrivers/hwmon/Makefile
- put in alphabetical orderdrivers/hwmon/da9058-hwmon.c
- aligned subsequent lines of function declarations
- used single function for all slow labels
- used recommended ..._label as function name
- error conditions are returned as negative integers
- chaned to suggested return value casting
- removed all constant sysfile atributes except the labels
- corrected parameter to adc read function to unsigned
- used suggest name 'input' instead of 'value'
- changed first temp attribute to temp1
- fixed expression error to boolean and from bitwise and
- removed redundant return statement
- removed race condition by initializing before create sysfs
- corected alignments on broken long lines
--- Documentation/hwmon/da9058 | 39 +++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 3 +- drivers/hwmon/da9058-hwmon.c | 349 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 400 insertions(+), 1 deletion(-) create mode 100644 Documentation/hwmon/da9058 create mode 100644 drivers/hwmon/da9058-hwmon.c
Documentation/hwmon/da9058 new file +39 -0
@@ -0,0 +1,39 @@ +Kernel driver da9058-hwmon +============= + +Supported chips: + * Dialog Semiconductor DA9058 PMIC + Prefix: 'da9058' + Datasheet: + http://www.dialog-semiconductor.com/products/power-management/da9058 + +Authors: Opensource [Anthony Olech] <[email protected]> + +Description +----------- + +The DA9058 PMIC contains a 5 channel ADC which can be used to monitor a +range of system operating parameters, including the battery voltage and +temperature. The ADC measures voltage, but two of the ADC channels can +be configured to supply a current, so that if an NTC termister is connected +then the voltage reading can be converted to a temperature. Currently the +driver provides reporting of all the input values but does not provide any +alarms. + +Voltage Monitoring +------------------ + +Voltages are sampled in either 'automatic' or 'manual' mode, which is an +initialization parameter set in the platform data by the machine driver. +In manual mode the ADC conversion is 12 bit and in automatic mode it is +10 bit. However all the raw readings are reported as 12 bit numbers. + +Physical Limits +--------------- + +vbat 2500 - 4500 milliVolts +tbat 0 - 2500 milliVolts +adc 0 - 2500 milliVolts +vfpin 0 - 4095 milliVolts +tjunc there is a correction factor programmed during manufacturing +
drivers/hwmon/Kconfig +10 -0
@@ -324,6 +324,16 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. +config SENSORS_DA9058 + tristate "Dialog Semiconductor DA9058 ADC" + depends on MFD_DA9058 && DA9058_ADC + help + If you say yes here you get support for the hardware monitoring + functionality of the Dialog Semiconductor DA9058 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9058-hwmon. + config SENSORS_DS620 tristate "Dallas Semiconductor DS620" depends on I2C
drivers/hwmon/Makefile +2 -1
@@ -46,7 +46,8 @@ obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o -obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o +obj-$(CONFIG_SENSORS_DA9055) += da9055-hwmon.o +obj-$(CONFIG_SENSORS_DA9058) += da9058-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
drivers/hwmon/da9058-hwmon.c new file +349 -0
349 lines not on this page · raw message
Signature · 7 lines
end-of-patch for NEW DRIVER V5 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Guenter Roeck
maintainerQuoted 126 lines · Anthony Olech
This patch is relative to linux next-20130417
This is the HWMON component driver of the Dialog DA9058 PMIC. This driver is just one component of the whole DA9058 PMIC driver. It depends on the CORE and ADC component drivers of the DA9058 MFD.
Changes relative to V3 of this patch:
- rebased to latest tagged linux-next - previously relative to mainlineDocumentation/hwmon/da9058
- added final NLdrivers/hwmon/Kconfig
- changed dependancy from I2C to MFDdrivers/hwmon/Makefile
- put in alphabetical orderdrivers/hwmon/da9058-hwmon.c
- aligned subsequent lines of function declarations
- used single function for all slow labels
- used recommended ..._label as function name
- error conditions are returned as negative integers
- chaned to suggested return value casting
- removed all constant sysfile atributes except the labels
- corrected parameter to adc read function to unsigned
- used suggest name 'input' instead of 'value'
- changed first temp attribute to temp1
- fixed expression error to boolean and from bitwise and
- removed redundant return statement
- removed race condition by initializing before create sysfs
- corected alignments on broken long linesSigned-off-by Anthony Olech <[email protected]>Signed-off-by David Dajun Chen <[email protected]>--- Documentation/hwmon/da9058 | 39 +++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 3 +- drivers/hwmon/da9058-hwmon.c | 349 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 400 insertions(+), 1 deletion(-) create mode 100644 Documentation/hwmon/da9058 create mode 100644 drivers/hwmon/da9058-hwmon.cDocumentation/hwmon/da9058 new file +39
-0@@ -0,0 +1,39 @@ +Kernel driver da9058-hwmon +========================== + +Supported chips: + * Dialog Semiconductor DA9058 PMIC + Prefix: 'da9058' + Datasheet: + http://www.dialog-semiconductor.com/products/power-management/da9058 + +Authors: Opensource [Anthony Olech] <[email protected]> + +Description +----------- + +The DA9058 PMIC contains a 5 channel ADC which can be used to monitor a +range of system operating parameters, including the battery voltage and +temperature. The ADC measures voltage, but two of the ADC channels can +be configured to supply a current, so that if an NTC termister is connected +then the voltage reading can be converted to a temperature. Currently the +driver provides reporting of all the input values but does not provide any +alarms. + +Voltage Monitoring +------------------ + +Voltages are sampled in either 'automatic' or 'manual' mode, which is an +initialization parameter set in the platform data by the machine driver. +In manual mode the ADC conversion is 12 bit and in automatic mode it is +10 bit. However all the raw readings are reported as 12 bit numbers. + +Physical Limits +--------------- + +vbat 2500 - 4500 milliVolts +tbat 0 - 2500 milliVolts +adc 0 - 2500 milliVolts +vfpin 0 - 4095 milliVolts +tjunc there is a correction factor programmed during manufacturing +drivers/hwmon/Kconfig +10
-0@@ -324,6 +324,16 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. +config SENSORS_DA9058 + tristate "Dialog Semiconductor DA9058 ADC" + depends on MFD_DA9058 && DA9058_ADC + help + If you say yes here you get support for the hardware monitoring + functionality of the Dialog Semiconductor DA9058 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9058-hwmon. + config SENSORS_DS620 tristate "Dallas Semiconductor DS620" depends on I2Cdrivers/hwmon/Makefile +2
-1@@ -46,7 +46,8 @@ obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o -obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o +obj-$(CONFIG_SENSORS_DA9055) += da9055-hwmon.o +obj-$(CONFIG_SENSORS_DA9058) += da9058-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.odrivers/hwmon/da9058-hwmon.c new file +0
-0
drivers/hwmon/da9058-hwmon.c line 3
Quoted 3 lines
drivers/hwmon/da9058-hwmon.c new file +3
-0@@ -0,0 +1,349 @@ +/* +* Copyright (C) 2012 Dialog Semiconductor Ltd. +*
2012 - 2013 ?
drivers/hwmon/da9058-hwmon.c line 15
Quoted 12 lines
drivers/hwmon/da9058-hwmon.c new file +12
-0+* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/regmap.h>
Are you using any regmap code ?
drivers/hwmon/da9058-hwmon.c line 21
Quoted 6 lines
drivers/hwmon/da9058-hwmon.c new file +6
-0+#include <linux/mfd/core.h> + +#include <linux/mfd/da9058/version.h> +#include <linux/mfd/da9058/registers.h> +#include <linux/mfd/da9058/core.h> +#include <linux/mfd/da9058/hwmon.h>
Why is the hwmon include file exported ? Is it needed outside this file ? If not, the defined should just be added here, without extra include file. If the defines are needed elsewhere, I would expect to be copied on the patch adding the file.
Also, do you really need to include all those header files ? For example, I don't immediately see how you use version.h.
Quoted 29 lines
drivers/hwmon/da9058-hwmon.c new file +29
-0+static ssize_t da9058_vbat_show_adc (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int voltage;/* x000 .. xFFF = 2500 .. 4500 mV */ +int ret; + + ret =da9058_adc_read (hwmon->da9058,DA9058_ADCMAN_MUXSEL_VBAT , + hwmon->use_automatic_adc, &voltage); +if (ret) +return ret; + +return sprintf (buf,"%d\n" ,2500 + voltage *2000 /0xFFF ); +} + +static ssize_t da9058_tbat_show_type (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); + +return sprintf (buf,"%d\n" , hwmon->battery_sensor_type); +} + +static ssize_t da9058_tbat_show_adc (struct device *dev, +struct device_attribute *devattr, +char *buf) +{
drivers/hwmon/da9058-hwmon.c line 61
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int voltage;/* x000 .. xFFF = 0 .. 2500 mV */ +int ret; + + ret =da9058_adc_read (hwmon->da9058,DA9058_ADCMAN_MUXSEL_TEMP , + hwmon->use_automatic_adc, &voltage); +if (ret) +return ret; + +return sprintf (buf,"%d\n" , voltage *2500 /0xFFF );
Might be a good idea to use DIV_ROUND_CLOSEST for those divisions to improve rounding.
Quoted 34 lines
drivers/hwmon/da9058-hwmon.c new file +34
-0+} + +static ssize_t da9058_gp_show_adc (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int voltage;/* xFFF .. x800 = 0 .. 2500 mV */ +int ret; + + ret =da9058_adc_read (hwmon->da9058,DA9058_ADCMAN_MUXSEL_ADCIN , + hwmon->use_automatic_adc, &voltage); +if (ret) +return ret; + +return sprintf (buf,"%d\n" , (0xFFF - voltage) *2500 /0x7FF ); +} + +static ssize_t da9058_tjunc_show_min (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int toffreg; +int ret =da9058_reg_read (hwmon->da9058,DA9058_TOFFSET_REG , &toffreg); + +if (ret) +return ret; + +return sprintf (buf,"%d\n" , -(1708 * (s8)((u8 )toffreg) +108800 )); +} + +static ssize_t da9058_tjunc_show_max(struct device *dev, + struct device_attribute *devattr,
drivers/hwmon/da9058-hwmon.c line 105
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int toffreg; +int ret =da9058_reg_read (hwmon->da9058,DA9058_TOFFSET_REG , &toffreg); + +if (ret) +return ret; + +return sprintf (buf,"%d\n" ,1708 *(255 - (s8)((u8 )toffreg)) -108800 );
Please watch for coding style: space before and after '*'. You have several of those in the patch. Don't ask me why checkpatch doesn't complain.
Quoted 16 lines
drivers/hwmon/da9058-hwmon.c new file +16
-0+} + +/* +* The algorithm for converting the value is +* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +* T_OFFSET is a trim value used to improve accuracy of the result +*/ +static ssize_t da9058_tjunc_show_adc (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +int tjunc; +unsigned int toffreg; +int ret; +
drivers/hwmon/da9058-hwmon.c line 131
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ ret =da9058_reg_read (hwmon->da9058,DA9058_TOFFSET_REG , &toffreg); +if (ret <0 ) +return ret; + + ret =da9058_adc_read (hwmon->da9058,DA9058_ADCMAN_MUXSEL_TJUNC , + hwmon->use_automatic_adc, &tjunc); +if (ret <0 ) +return ret; + + tjunc >>=4 ;/* recover most sig 8 bits as a pos/zero number */
"Recover" is a bit odd here. Is this what you mean ?
drivers/hwmon/da9058-hwmon.c line 132
Quoted 2 lines
drivers/hwmon/da9058-hwmon.c new file +2
-0+ +return sprintf (buf,"%d\n" ,1708 *(tjunc - (s8)((u8 )toffreg)) -108800 );
Here again
Quoted 4 lines
drivers/hwmon/da9058-hwmon.c new file +4
-0+} +static ssize_t da9058_tjunc_show_offset (struct device *dev, +struct device_attribute *devattr, +char *buf)
drivers/hwmon/da9058-hwmon.c line 147
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int toffreg; +int ret; + + ret =da9058_reg_read (hwmon->da9058,DA9058_TOFFSET_REG , &toffreg); +if (ret <0 ) +return ret; + +return sprintf (buf,"%d\n" ,-1708 *(s8)((u8 )toffreg) -108800 );
And again
Quoted 28 lines
drivers/hwmon/da9058-hwmon.c new file +28
-0+} + +static ssize_t da9058_vfpin_show_adc (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9058_hwmon *hwmon =dev_get_drvdata (dev); +unsigned int voltage;/* x000 .. xFFF = 0 .. 4095 mV */ +int ret; + + ret =da9058_adc_read (hwmon->da9058,DA9058_ADCMAN_MUXSEL_VF , + hwmon->use_automatic_adc, &voltage); +if (ret) +return ret; + +return sprintf (buf,"%d\n" , voltage); +} + +static ssize_t da9058_hwmon_show_name (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +return sprintf (buf,"da9058\n" ); +} + +static ssize_t da9058_show_label (struct device *dev, +struct device_attribute *devattr, +char *buf)
drivers/hwmon/da9058-hwmon.c line 185
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+{ +int channel =to_sensor_dev_attr (devattr)->index; + +switch (channel) { +case 0 :return sprintf (buf,"vbat\n" ); +case 1 :return sprintf (buf,"tbat\n" ); +case 2 :return sprintf (buf,"vfpin\n" ); +case 3 :return sprintf (buf,"adc\n" ); +case 4 :return sprintf (buf,"tjunc\n" ); +default :return -EINVAL ;
One statement per line, please.
On the other side, since the value range of channel is well known, it would be simpler to declare
static const char * const da9058_labels[] = {
"vbat", "tbat", "vfpin", "adc", "tjunc"
};
...
return sprintf("%s\n", da9058_labels[channel]);and drop the case statement entirely.
Plus, you can actually merge "da9058_hwmon_show_name" into the same function by just defining another index for it.
Quoted 14 lines
drivers/hwmon/da9058-hwmon.c new file +14
-0+ } +} + +static DEVICE_ATTR(name, S_IRUGO, da9058_hwmon_show_name, NULL); + +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, da9058_show_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9058_vbat_show_adc, NULL, 0); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, da9058_show_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, da9058_tbat_show_type, NULL, 1); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9058_tbat_show_adc, NULL, 1); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, da9058_show_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, da9058_vfpin_show_adc, NULL, 2);
drivers/hwmon/da9058-hwmon.c line 209
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, da9058_show_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, da9058_gp_show_adc, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, da9058_show_label, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, da9058_tjunc_show_min, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, da9058_tjunc_show_max, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9058_tjunc_show_adc, NULL, 4); +static SENSOR_DEVICE_ATTR(temp2_offset, S_IRUGO, da9058_tjunc_show_offset, NULL, + 4);
Alignment ?
Quoted 11 lines
drivers/hwmon/da9058-hwmon.c new file +11
-0+ +static struct attribute *da9058_attr[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_type.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr,
drivers/hwmon/da9058-hwmon.c line 230
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + NULL +}; + +static const struct attribute_group da9058_attr_group = {.attrs = da9058_attr};
Might be better to split this instead of packing it together to avoid the 80-column limit.
drivers/hwmon/da9058-hwmon.c line 242
Quoted 12 lines
drivers/hwmon/da9058-hwmon.c new file +12
-0+ +static int da9058_hwmon_probe (struct platform_device *pdev) +{ +struct da9058 *da9058 =dev_get_drvdata (pdev->dev.parent); +const struct mfd_cell *cell =mfd_get_cell (pdev); +struct da9058_hwmon_pdata *hwmon_pdata; +struct da9058_hwmon *hwmon; +int ret; + +if (cell ==NULL ) { + ret = -ENODEV ; + goto exit;
Just return -ENODEV is good enough here. See CodingStyle, chapter 7. Same below where you can return directly.
Quoted 7 lines
drivers/hwmon/da9058-hwmon.c new file +7
-0+ } + + hwmon_pdata = cell->platform_data; + +if (hwmon_pdata ==NULL ) { + ret = -EINVAL ; + goto exit;
drivers/hwmon/da9058-hwmon.c line 259
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ } + +if (hwmon_pdata->use_automatic_adc && + !hwmon_pdata->temp_adc_resistance) { + ret = -EINVAL ;/* impossible setting */ + goto exit; + } + + hwmon =devm_kzalloc (&pdev->dev,sizeof (struct da9058_hwmon ), +GFP_KERNEL );
Is the alignment correct here ?
Quoted 28 lines
drivers/hwmon/da9058-hwmon.c new file +28
-0+if (!hwmon) { + ret = -ENOMEM ; + goto exit; + } + +platform_set_drvdata (pdev, hwmon); + + hwmon->da9058 = da9058; + hwmon->pdev = pdev; + hwmon->use_automatic_adc = hwmon_pdata->use_automatic_adc; + hwmon->temp_adc_resistance = hwmon_pdata->temp_adc_resistance; + hwmon->vf_adc_resistance = hwmon_pdata->vf_adc_resistance; + hwmon->battery_sensor_type = hwmon_pdata->battery_sensor_type; + +if (hwmon->use_automatic_adc) { +unsigned int mode =DA9058_ADCCONT_AUTOADCEN | +DA9058_ADCCONT_TEMPISRCEN | +DA9058_ADCCONT_AUTOVBATEN | +DA9058_ADCCONT_AUTOVFEN | +DA9058_ADCCONT_AUTOAINEN ; + +if (hwmon->vf_adc_resistance) + mode |=DA9058_ADCCONT_VFISRCEN ; + + ret =da9058_reg_write (da9058,DA9058_ADCCONT_REG , mode); +if (ret) + goto failed_to_initialize_device; + }else {
drivers/hwmon/da9058-hwmon.c line 297
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+unsigned int mode =0 ; + +if (hwmon->temp_adc_resistance) + mode |=DA9058_ADCCONT_TEMPISRCEN ; +if (hwmon->vf_adc_resistance) + mode |=DA9058_ADCCONT_VFISRCEN ; + + ret =da9058_reg_write (da9058,DA9058_ADCCONT_REG , mode); +if (ret) + goto failed_to_initialize_device;
The last 6 lines are duplicate and can be outside the if/else statement. Just declare mode at the beginning of the function.
drivers/hwmon/da9058-hwmon.c line 300
Quoted 3 lines
drivers/hwmon/da9058-hwmon.c new file +3
-0+ } + +mutex_init (&hwmon->hwmon_lock);
Any idea what you plan to use this lock for ?
drivers/hwmon/da9058-hwmon.c line 306
Quoted 6 lines
drivers/hwmon/da9058-hwmon.c new file +6
-0+ + hwmon->class_device =hwmon_device_register (&pdev->dev); +if (IS_ERR (hwmon->class_device)) { + ret =PTR_ERR (hwmon->class_device); + goto failed_to_register_device; + }
hwmon_device_register comes last to prevent race conditions where the hwmon device exists and is reported to user space, but the attributes are missing.
drivers/hwmon/da9058-hwmon.c line 312
Quoted 6 lines
drivers/hwmon/da9058-hwmon.c new file +6
-0+ + ret =sysfs_create_group (&pdev->dev.kobj, &da9058_attr_group); +if (ret) + goto failed_to_create_sysfs_group; + + goto exit;
Please just return 0; here.
drivers/hwmon/da9058-hwmon.c line 319
Quoted 7 lines
drivers/hwmon/da9058-hwmon.c new file +7
-0+ +failed_to_create_sysfs_group: +hwmon_device_unregister (hwmon->class_device); +failed_to_register_device: +sysfs_remove_group (&pdev->dev.kobj, &da9058_attr_group); +failed_to_initialize_device: +exit:
Two labels are really unnecessary here.
drivers/hwmon/da9058-hwmon.c line 329
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+return ret; +} + +static int da9058_hwmon_remove (struct platform_device *pdev) +{ +struct da9058_hwmon *hwmon =platform_get_drvdata (pdev); + +sysfs_remove_group (&pdev->dev.kobj, &da9058_attr_group); + +
One empty line is enough.
drivers/hwmon/da9058-hwmon.c line 330
Quoted 2 lines
drivers/hwmon/da9058-hwmon.c new file +2
-0+hwmon_device_unregister (hwmon->class_device); +
hwmon_device_unregister comes first to prevent race conditions on unload.
Quoted 5 lines
drivers/hwmon/da9058-hwmon.c new file +5
-0+return 0 ; +} + +static struct platform_driver da9058_hwmon_driver = { + .probe = da9058_hwmon_probe,
drivers/hwmon/da9058-hwmon.c line 346
Quoted 10 lines
drivers/hwmon/da9058-hwmon.c new file +10
-0+ .remove = da9058_hwmon_remove, + .driver = { + .name = "da9058-hwmon", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver (da9058_hwmon_driver); + +MODULE_DESCRIPTION ("Dialog DA9058 PMIC HardWare Monitor Driver" );
HardWare isn't really common english, not even as capital letters.
Quoted 7 lines
drivers/hwmon/da9058-hwmon.c new file +3
-0+MODULE_AUTHOR ("Anthony Olech <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_ALIAS ("platform:da9058-hwmon" );Signature · 1 line
end-of-patch for NEW DRIVER V5