rsxx: Adding EEH check inside cregs timeout.
PATCH 4/8 rsxx: Adding EEH check inside cregs timeout.
From: Philip J Kelleher <[email protected]>
Unfortunaly, our CPU register path does not do any kind of EEH error checking. So to fix this issue, an ioread32 was added to the CPU register timeout code. This way, the driver can check to see if the timeout was caused by an EEH error or not. This is a dummy read.
Signed-off-by Philip J Kelleher <[email protected]>
-------------------------------------------------------------------------------
drivers/block/rsxx/cregs.c +9 -0
@@ -431,6 +431,15 @@ static int __issue_creg_rw(struct rsxx_c *hw_stat = completion.creg_status;if (completion.st) { +/* +* This read is needed to verify that there has not been any +* extreme errors that might have occurred, i.e. EEH. The +* function iowrite32 will not detect EEH errors, so it is +* necessary that we recover if such an error is the reason +* for the timeout. This is a dummy read. +*/ +ioread32 (card->regmap +SCRATCH ); +dev_warn (CARD_TO_DEV (card),"creg command failed(%d x%08x)\n" , completion.st, addr);